1.Products of the basic rawmaterials industry Products of the basic raw materialsindustry should improve product quality,make great efforts to realize diversification,serialization and specialization in productvariety...1.Products of the basic rawmaterials industry Products of the basic raw materialsindustry should improve product quality,make great efforts to realize diversification,serialization and specialization in productvariety,develop new varieties,and expandproduction so as to adapt to the demands forthe development of the food industry. Cereals:Develop high quality riceand wheat flour on a grade and class basis;develop special rice and wheat flour suitablefor the needs of processing various kinds offood;actively utilize coarse cereals such ascorn to open up various kinds of展开更多
In this paper we derive sufficient conditions for strict convexity of subsets in a complete simply connected smooth Riemanian manifold without focal points in terms of local and global exposed points.
Light Detection And Ranging (LiDAR) is a well-established active remote sensing technology that can provide accurate digital elevation measurements for the terrain and non-ground objects such as vegetations and buildi...Light Detection And Ranging (LiDAR) is a well-established active remote sensing technology that can provide accurate digital elevation measurements for the terrain and non-ground objects such as vegetations and buildings, etc. Non-ground objects need to be removed for creation of a Digital Terrain Model (DTM) which is a continuous surface representing only ground surface points. This study aimed at comparative analysis of three main filtering approaches for stripping off non-ground objects namely;Gaussian low pass filter, focal analysis mean filter and DTM slope-based filter of varying window sizes in creation of a reliable DTM from airborne LiDAR point clouds. A sample of LiDAR data provided by the ISPRS WG III/4 captured at Vaihingen in Germany over a pure residential area has been used in the analysis. Visual analysis has indicated that Gaussian low pass filter has given blurred DTMs of attenuated high-frequency objects and emphasized low-frequency objects while it has achieved improved removal of non-ground object at larger window sizes. Focal analysis mean filter has shown better removal of nonground objects compared to Gaussian low pass filter especially at large window sizes where details of non-ground objects almost have diminished in the DTMs from window sizes of 25 × 25 and greater. DTM slope-based filter has created bare earth models that have been full of gabs at the positions of the non-ground objects where the sizes and numbers of that gabs have increased with increasing the window sizes of filter. Those gaps have been closed through exploitation of the spline interpolation method in order to get continuous surface representing bare earth landscape. Comparative analysis has shown that the minimum elevations of the DTMs increase with increasing the filter widow sizes till 21 × 21 and 31 × 31 for the Gaussian low pass filter and the focal analysis mean filter respectively. On the other hand, the DTM slope-based filter has kept the minimum elevation of the original data, that could be due to noise in the LiDAR data unchanged. Alternatively, the three approaches have produced DTMs of decreasing maximum elevation values and consequently decreasing ranges of elevations due to increases in the filter window sizes. Moreover, the standard deviations of the created DTMs from the three filters have decreased with increasing the filter window sizes however, the decreases have been continuous and steady in the cases of the Gaussian low pass filter and the focal analysis mean filters while in the case of the DTM slope-based filter the standard deviations of the created DTMs have decreased with high rates till window size of 31 × 31 then they have kept unchanged due to more increases in the filter window sizes.展开更多
A dish/stifling solar thermal electricity system consists of two parts： a dish solar concentrator and a Stifling engine. For optimizing the system, in this paper, the mathematical model for concentrator design was es...A dish/stifling solar thermal electricity system consists of two parts： a dish solar concentrator and a Stifling engine. For optimizing the system, in this paper, the mathematical model for concentrator design was established and the effects of those design parameters of concentrator, such as the size and intensity of the focal point, the receiver temperature, on the efficiency of the Stifling engine and output power were numerically simulated. The results of the simulation revealed a close relationship between power and efficiency because of power losses, and there was a maximum for the engine efficiency and power with increasing solar radiation because there was a peak value of system efficiency with increasing receiver temperature. So, in view of our Stifling engine, the 450 rim angle and 6m focal length are optimal design for concentrator and the 800℃receiver temperature is best.展开更多
The performance of engineered wood products is highly associated with proper bonding and an efficient cutting method.This paper investigates the influence of CO_(2) laser cutting on the wetting properties,the modified ch...The performance of engineered wood products is highly associated with proper bonding and an efficient cutting method.This paper investigates the influence of CO_(2) laser cutting on the wetting properties,the modified che-mical component of the laser-cut surface,and the strength and adhesive penetration near the bondline.Beech-wood is cut by the laser with varying processing parameters,cutting speeds,gas pressures,and focal point positions.The laser-cut samples were divided into two groups,sanded and non-sanded samples.Polyvinyl acetate adhesive(PVAc)was used to bond the groups of laser-cut samples.After assembly with cold pressing,the tensile shear test was carried out.Numerical modelling was carried out to determine the partial elongation and shear strain of the glue line.Based on this,the shear modulus and linear elasticity of the glue line were estimated.Scan-ning electron microscopy was used to assess the adhesive penetration into the porosity structure of the laser-cut samples,and the depth of the heat-affected zone.The laser-cut surface was analysed by Fourier transform infrared spectroscopy.The wetting properties of the laser-cut surface were investigated by using a contact angle goni-ometer.The numerical model of the strain-stress curve confirmed the experimental model.The highest modulus of the linear elasticity of the glue in the numerical calculation belongs to the joint containing laser-cut samples at a gas pressure of 21(bar).The penetration depth of PVAc adhesive into the porosity structure of the laser-cut sam-ples was similar to that of sawn samples.The deepest heat-affected zone in the laser-cut samples was 150µm.A PVAc drop disappeared immediately on the laser-cut surface without sanding,but gradually on the sanded surface.In contrast,the drop on the sawn surface remained with an angle of 32°–48°.The degradation of hemi-cellulose and lignin was proven by the lower intensity of the C=O and C-O Bonds,compared to the sawn surface.展开更多
Odour of Chrysanthemums is one of the short stories by D. H. Lawrence. The fiction shows how humanity was ruined by bourgeois industrial civilization through the death of a miner. In embedding themes, the narrative te...Odour of Chrysanthemums is one of the short stories by D. H. Lawrence. The fiction shows how humanity was ruined by bourgeois industrial civilization through the death of a miner. In embedding themes, the narrative technique of Odour of Chrysanthemums is worth our attention. This paper is intended to make an analysis of point of view, focalization and symbol in the light of narrative theory.展开更多
As a regional, real-time and dynamic method, microseismic monitoring technology is quite an appropriate technology for forecasting geological hazards, such as rock bursts, mine tremors, coal and gas outbursts and can ...As a regional, real-time and dynamic method, microseismic monitoring technology is quite an appropriate technology for forecasting geological hazards, such as rock bursts, mine tremors, coal and gas outbursts and can even be used to prevent or at least reduce these disasters. The study of the focal mechanisms of different seismic sources is the prerequisite and basis for forecasting rock burst by microseismic monitoring technology. Based on the analysis on the mechanism and fracture course of coal pillars where rock bursts occur mostly, the equivalent point source model of the seismicity caused by a coal pillar was created. Given the model, the seismic displacement equation of a coal pillar was analyzed and the seismic mechanism was pointed out by seismic wave theory. The course of the fracture of the coal pillar was simulated closely in the laboratory and the equivalent microseismic signals of the fractures of the coal pillar were acquired using a TDS-6 experimental system. The results show that, by the pressure and friction of a medium near the seismic source, both a compression wave and a shear wave will be emitted and shear fracture will be induced at the moment of breakage. The results can be used to provide an academic basis to forecast and prevent rock bursts or tremors in a coal pillar.展开更多
We investigated the dependence of laser-induced breakdown spectral intensity on the focusing position of a lens at different sample temperatures(room temperature to 300 ℃) in atmosphere.A Q-switched Nd:YAG nanosecond...We investigated the dependence of laser-induced breakdown spectral intensity on the focusing position of a lens at different sample temperatures(room temperature to 300 ℃) in atmosphere.A Q-switched Nd:YAG nanosecond pulsed laser with 1064 nm wavelength and 10 ns pulse width was used to ablate silicon to produce plasma. It was confirmed that the increase in the sample's initial temperature could improve spectral line intensity. In addition, when the distance from the target surface to the focal point increased, the intensity firstly rose, and then dropped.The trend of change with distance was more obvious at higher sample temperatures. By observing the distribution of the normalized ratio of Si atomic spectral line intensity and Si ionic spectral line intensity as functions of distance and temperature, the maximum value of normalized ratio appeared at the longer distance as the initial temperature was higher, while the maximum ratio appeared at the shorter distance as the sample temperature was lower.展开更多
Transmission matrix(TM)is an important tool for controlling light focusing,imaging,and communication through turbid media.It can be measured by 3-step(TM3)or 4-step(TM4)phase-shifting interference,but the similarities...Transmission matrix(TM)is an important tool for controlling light focusing,imaging,and communication through turbid media.It can be measured by 3-step(TM3)or 4-step(TM4)phase-shifting interference,but the similarities and differences of the transmission matrices obtained by the two methods are rarely reported.Therefore,we make a quantitative comparison of the peak light intensity,signal-to-noise ratio,and average background of 24×24=576 focal points between paired samples(TM3-TM4)through the Wilcoxon rank sum test,and discuss the singular value of the transmission matrix and the focal peak.The comparative results of peak light intensity and signal-to-noise ratio show that there is a significant difference between the 3-step phase shift and the 4-step phase shift transmission matrixes.The focusing effect of the former is significantly better than that of the latter;interest concentrates on the focal intensity and singular value.The reciprocal of the singular value is proportional to the squared intensity,which is in accordance with singular value theory.The results of comparison of peak light intensity and signal-to-noise ratio strongly suggest that 3-step phase shift should be selected and used in applying the phase shift method to the measurement of the transmission matrix;and the singular value is of great significance in quantifying the focusing,imaging,and communication quality of the transmission matrix.展开更多
Invex bodies represent an important class of bodies which are considered as a generalization of convex bodies.In this article,the author studies the supporting for this class of bodies as well as the separating subset...Invex bodies represent an important class of bodies which are considered as a generalization of convex bodies.In this article,the author studies the supporting for this class of bodies as well as the separating subsets of two bodies.展开更多
文摘1.Products of the basic rawmaterials industry Products of the basic raw materialsindustry should improve product quality,make great efforts to realize diversification,serialization and specialization in productvariety,develop new varieties,and expandproduction so as to adapt to the demands forthe development of the food industry. Cereals:Develop high quality riceand wheat flour on a grade and class basis;develop special rice and wheat flour suitablefor the needs of processing various kinds offood;actively utilize coarse cereals such ascorn to open up various kinds of
文摘In this paper we derive sufficient conditions for strict convexity of subsets in a complete simply connected smooth Riemanian manifold without focal points in terms of local and global exposed points.
文摘Light Detection And Ranging (LiDAR) is a well-established active remote sensing technology that can provide accurate digital elevation measurements for the terrain and non-ground objects such as vegetations and buildings, etc. Non-ground objects need to be removed for creation of a Digital Terrain Model (DTM) which is a continuous surface representing only ground surface points. This study aimed at comparative analysis of three main filtering approaches for stripping off non-ground objects namely;Gaussian low pass filter, focal analysis mean filter and DTM slope-based filter of varying window sizes in creation of a reliable DTM from airborne LiDAR point clouds. A sample of LiDAR data provided by the ISPRS WG III/4 captured at Vaihingen in Germany over a pure residential area has been used in the analysis. Visual analysis has indicated that Gaussian low pass filter has given blurred DTMs of attenuated high-frequency objects and emphasized low-frequency objects while it has achieved improved removal of non-ground object at larger window sizes. Focal analysis mean filter has shown better removal of nonground objects compared to Gaussian low pass filter especially at large window sizes where details of non-ground objects almost have diminished in the DTMs from window sizes of 25 × 25 and greater. DTM slope-based filter has created bare earth models that have been full of gabs at the positions of the non-ground objects where the sizes and numbers of that gabs have increased with increasing the window sizes of filter. Those gaps have been closed through exploitation of the spline interpolation method in order to get continuous surface representing bare earth landscape. Comparative analysis has shown that the minimum elevations of the DTMs increase with increasing the filter widow sizes till 21 × 21 and 31 × 31 for the Gaussian low pass filter and the focal analysis mean filter respectively. On the other hand, the DTM slope-based filter has kept the minimum elevation of the original data, that could be due to noise in the LiDAR data unchanged. Alternatively, the three approaches have produced DTMs of decreasing maximum elevation values and consequently decreasing ranges of elevations due to increases in the filter window sizes. Moreover, the standard deviations of the created DTMs from the three filters have decreased with increasing the filter window sizes however, the decreases have been continuous and steady in the cases of the Gaussian low pass filter and the focal analysis mean filters while in the case of the DTM slope-based filter the standard deviations of the created DTMs have decreased with high rates till window size of 31 × 31 then they have kept unchanged due to more increases in the filter window sizes.
文摘A dish/stifling solar thermal electricity system consists of two parts： a dish solar concentrator and a Stifling engine. For optimizing the system, in this paper, the mathematical model for concentrator design was established and the effects of those design parameters of concentrator, such as the size and intensity of the focal point, the receiver temperature, on the efficiency of the Stifling engine and output power were numerically simulated. The results of the simulation revealed a close relationship between power and efficiency because of power losses, and there was a maximum for the engine efficiency and power with increasing solar radiation because there was a peak value of system efficiency with increasing receiver temperature. So, in view of our Stifling engine, the 450 rim angle and 6m focal length are optimal design for concentrator and the 800℃receiver temperature is best.
文摘The performance of engineered wood products is highly associated with proper bonding and an efficient cutting method.This paper investigates the influence of CO_(2) laser cutting on the wetting properties,the modified che-mical component of the laser-cut surface,and the strength and adhesive penetration near the bondline.Beech-wood is cut by the laser with varying processing parameters,cutting speeds,gas pressures,and focal point positions.The laser-cut samples were divided into two groups,sanded and non-sanded samples.Polyvinyl acetate adhesive(PVAc)was used to bond the groups of laser-cut samples.After assembly with cold pressing,the tensile shear test was carried out.Numerical modelling was carried out to determine the partial elongation and shear strain of the glue line.Based on this,the shear modulus and linear elasticity of the glue line were estimated.Scan-ning electron microscopy was used to assess the adhesive penetration into the porosity structure of the laser-cut samples,and the depth of the heat-affected zone.The laser-cut surface was analysed by Fourier transform infrared spectroscopy.The wetting properties of the laser-cut surface were investigated by using a contact angle goni-ometer.The numerical model of the strain-stress curve confirmed the experimental model.The highest modulus of the linear elasticity of the glue in the numerical calculation belongs to the joint containing laser-cut samples at a gas pressure of 21(bar).The penetration depth of PVAc adhesive into the porosity structure of the laser-cut sam-ples was similar to that of sawn samples.The deepest heat-affected zone in the laser-cut samples was 150µm.A PVAc drop disappeared immediately on the laser-cut surface without sanding,but gradually on the sanded surface.In contrast,the drop on the sawn surface remained with an angle of 32°–48°.The degradation of hemi-cellulose and lignin was proven by the lower intensity of the C=O and C-O Bonds,compared to the sawn surface.
文摘Odour of Chrysanthemums is one of the short stories by D. H. Lawrence. The fiction shows how humanity was ruined by bourgeois industrial civilization through the death of a miner. In embedding themes, the narrative technique of Odour of Chrysanthemums is worth our attention. This paper is intended to make an analysis of point of view, focalization and symbol in the light of narrative theory.
基金Projects 5049027350474068 supported by the National Natural Science Foundation of China+3 种基金2005CB221504 by the National Basic Research Program of China20030290017 by the Special Fund for Ph.D. Programs of the National Ministry of Education2006BAK04B02, 2006BAK03B06 by the National Eleventh Five-Year Key Science & Technology Project[2007]3020 by the State Scholarship Fund of China Scholarship Council
文摘As a regional, real-time and dynamic method, microseismic monitoring technology is quite an appropriate technology for forecasting geological hazards, such as rock bursts, mine tremors, coal and gas outbursts and can even be used to prevent or at least reduce these disasters. The study of the focal mechanisms of different seismic sources is the prerequisite and basis for forecasting rock burst by microseismic monitoring technology. Based on the analysis on the mechanism and fracture course of coal pillars where rock bursts occur mostly, the equivalent point source model of the seismicity caused by a coal pillar was created. Given the model, the seismic displacement equation of a coal pillar was analyzed and the seismic mechanism was pointed out by seismic wave theory. The course of the fracture of the coal pillar was simulated closely in the laboratory and the equivalent microseismic signals of the fractures of the coal pillar were acquired using a TDS-6 experimental system. The results show that, by the pressure and friction of a medium near the seismic source, both a compression wave and a shear wave will be emitted and shear fracture will be induced at the moment of breakage. The results can be used to provide an academic basis to forecast and prevent rock bursts or tremors in a coal pillar.
基金support by National Natural Science Foundation of China (Grant Nos. 11674128, 11504129, and 11474129)Jilin Province Scientific and Technological Development Program, China (Grant No. 20170101063JC)the Thirteenth Five-Year Scientific and Technological Research Project of the Education Department of Jilin Province, China (2016, No. 400)
文摘We investigated the dependence of laser-induced breakdown spectral intensity on the focusing position of a lens at different sample temperatures(room temperature to 300 ℃) in atmosphere.A Q-switched Nd:YAG nanosecond pulsed laser with 1064 nm wavelength and 10 ns pulse width was used to ablate silicon to produce plasma. It was confirmed that the increase in the sample's initial temperature could improve spectral line intensity. In addition, when the distance from the target surface to the focal point increased, the intensity firstly rose, and then dropped.The trend of change with distance was more obvious at higher sample temperatures. By observing the distribution of the normalized ratio of Si atomic spectral line intensity and Si ionic spectral line intensity as functions of distance and temperature, the maximum value of normalized ratio appeared at the longer distance as the initial temperature was higher, while the maximum ratio appeared at the shorter distance as the sample temperature was lower.
文摘Transmission matrix(TM)is an important tool for controlling light focusing,imaging,and communication through turbid media.It can be measured by 3-step(TM3)or 4-step(TM4)phase-shifting interference,but the similarities and differences of the transmission matrices obtained by the two methods are rarely reported.Therefore,we make a quantitative comparison of the peak light intensity,signal-to-noise ratio,and average background of 24×24=576 focal points between paired samples(TM3-TM4)through the Wilcoxon rank sum test,and discuss the singular value of the transmission matrix and the focal peak.The comparative results of peak light intensity and signal-to-noise ratio show that there is a significant difference between the 3-step phase shift and the 4-step phase shift transmission matrixes.The focusing effect of the former is significantly better than that of the latter;interest concentrates on the focal intensity and singular value.The reciprocal of the singular value is proportional to the squared intensity,which is in accordance with singular value theory.The results of comparison of peak light intensity and signal-to-noise ratio strongly suggest that 3-step phase shift should be selected and used in applying the phase shift method to the measurement of the transmission matrix;and the singular value is of great significance in quantifying the focusing,imaging,and communication quality of the transmission matrix.
文摘Invex bodies represent an important class of bodies which are considered as a generalization of convex bodies.In this article,the author studies the supporting for this class of bodies as well as the separating subsets of two bodies.
