Tuning the diffusion constant to optimize the readout of positional information of spatial concentration patterns

Positional information encoded in spatial concentration patterns is crucial for the development of multicellular organisms.However,it is still unclear how such information is affected by the physically dissipative diffusion process.Here we study one-dimensional patterning systems with analytical derivation and numerical simulations.We find that the diffusion constant of the patterning molecules exhibits a nonmonotonic effect on the readout of the positional information from the concentration patterns.Specifically,there exists an optimal diffusion constant that maximizes the positional information.Moreover,we find that the energy dissipation due to the physical diffusion imposes a fundamental upper limit on the positional information.

Method for determining the position of landslide slip-surface with a typical inclinometric curves

In the actual monitoring of deep hole displacement,the identification of slip surfaces is primarily based on abrupt changes observed in the inclinometric curve.In conventional identification methods,inclinometric curves exhibiting indications of sliding can be categorized into three types:B-type,D-type,and r-type.The position of the slip surface is typically determined by identifying the depth corresponding to the point of maximum displacement mutation.However,this method is sensitive to the interval of measurement points and the observation scale of the coordinate axes and suffers from unclear sliding surfaces and uncertain values.Based on the variation characteristics of these diagonal curves,we classified the landslide into three components:the sliding body,the sliding interval,and the immobile body.Moreover,three different generalization models were established to analyze the relationships between the curve form and the slip surface location based on different physical indicators such as displacement rate,relative displacement,and acceleration.The results show that the displacement rate curves of an r-type slope exhibit a clustering feature in the sliding interval,and by solving for the depth of discrete points within the step phase,it is possible to determine the location of the slip surface.On the other hand,D-type slopes have inflection points in the relative displacement curve located at the slip surface.The acceleration curves of B-type slopes exhibit clustering characteristics during the sliding interval,while the scattered acceleration data demonstrate wandering characteristics.Consequently,the slip surface location can be revealed by solving the depth corresponding to the maximum acceleration with cubic spline interpolation.The approach proposed in this paper was applied to the monitoring data of a landslide in Yunnan Province,China.The results indicate that our approach can accurately identify the slip surface location and enable computability of its position,thereby enhancing applicability and reliability of the deep-hole displacement monitoring data.

Effects of the initiation position on the damage and fracture characteristics of linear-charge blasting in rock

To study the effects of the initiation position on the damage and fracture characteristics of linear-charge blasting, blasting model experiments were conducted in this study using computed tomography scanning and three-dimensional reconstruction methods. The fractal damage theory was used to quantify the crack distribution and damage degree of sandstone specimens after blasting. The results showed that regardless of an inverse or top initiation, due to compression deformation and sliding frictional resistance, the plugging medium of the borehole is effective. The energy of the explosive gas near the top of the borehole is consumed. This affects the effective crushing of rocks near the top of the borehole, where the extent of damage to Sections Ⅰ and Ⅱ is less than that of Sections Ⅲ and Ⅳ. In addition, the analysis revealed that under conditions of top initiation, the reflected tensile damage of the rock at the free face of the top of the borehole and the compression deformation of the plug and friction consume more blasting energy, resulting in lower blasting energy efficiency for top initiation. As a result, the overall damage degree of the specimens in the top-initiation group was significantly smaller than that in the inverse-initiation group. Under conditions of inverse initiation, the blasting energy efficiency is greater, causing the specimen to experience greater damage. Therefore, in the engineering practice of rock tunnel cut blasting, to utilize blasting energy effectively and enhance the effects of rock fragmentation, using the inverse-initiation method is recommended. In addition, in three-dimensional(3D) rock blasting, the bottom of the borehole has obvious end effects under the conditions of inverse initiation, and the crack distribution at the bottom of the borehole is trumpet-shaped. The occurrence of an end effect in the 3D linear-charge blasting model experiment is related to the initiation position and the blocking condition.

Developing a highly scalable synthetic strategy for 5-amino-4-nitrobenzo[1,2-c:3,4-c']bis([1,2,5]oxadiazole)1,b-dioxide(CL-18)and investigating the influence of crystal engineering and positional isomerization on its safety and laser ignition performance

5-amino-4-nitrobenzo[1,2-c:3,4-c']bis([1,2,5]oxadiazole)1,6-dioxide(CL-18)exhibits significant potential as an initiating explosive.However,its current synthesis process remains non-scalable due to low yields and safety risks.In this study,we have developed a simple and safe synthetic route for CL-18.It was synthesized from 3,5-dihaloanisole in a four-step reaction with an overall yield exceeding 60%,surpassing all reported yields in the literature.Subsequently,recrystallization of CL-18 was successfully achieved by carefully selecting appropriate solvents and antisolvents to reduce its mechanical sensitivity.Ultimately,when DMF-ethanol was employed as the recrystallization solvent system,satisfactory product yield(>90%)and reduced mechanical sensitivity(IS=15 J;FS=216 N)were obtained.Additionally,CL-18 is derived from the rearrangement of oxygen atoms on i-CL-18 furoxan,and a comparative analysis of their physicochemical properties was conducted.The thermal stability of both compounds is similar,with onset decomposition temperatures recorded at 186 and 182℃respectively.Similarly,they exhibit 5 s breaking point temperatures of 236 and 237℃.Additionally,we present novel insights into the positional-isomerization-laser-ignition performance of CL-18 and its isomer i-CL-18 using laser irradiation for the first time.Remarkably,our findings demonstrate that i-CL-18 exhibits enhanced laser sensitivity,as it can be directly ignited by a 1064 nm wavelength laser,whereas CL-18 lacks this characteristic.

Synthetic Aperture Positioning: A Review

Obtaining precise position of interested emitters passively has wide applications in both civilian and military fields.Different from traditional parameter measurement and direct position determination(DPD)method,recently a new passive localization method based on synthetic aper-ture technique,named synthetic aperture positioning(SAP),has been proposed.The method com-pensates for the nonlinear phase produced by relative motion between the moving platform and the emitter,achieving coherent summation of intercepted signals.The SAP can obtain high-resolution and high-precision localization results at a low signal-to-noise ratio.This paper summarizes the research progress of SAP,including localization principles,spaceborne applications,and application scope analysis.Besides,the possible future outlook of SAP is considered.

Combined application of organic fertilizer and chemical fertilizer alleviates the kernel position effect in summer maize by promoting post-silking nitrogen uptake and dry matter accumulation

Adjusting agronomic measures to alleviate the kernel position effect in maize is important for ensuring high yields.In order to clarify whether the combined application of organic fertilizer and chemical fertilizer(CAOFCF)can alleviate the kernel position effect of summer maize,field experiments were conducted during the 2019 and 2020 growing seasons,and five treatments were assessed:CF,100%chemical fertilizer;OFCF1,15%organic fertilizer+85%chemical fertilizer;OFCF2,30%organic fertilizer+70%chemical fertilizer;OFCF3,45%organic fertilizer+55%chemical fertilizer;and OFCF4,60%organic fertilizer+40%chemical fertilizer.Compared with the CF treatment,the OFCF1 and OFCF2 treatments significantly alleviated the kernel position effect by increasing the weight ratio of inferior kernels to superior kernels and reducing the weight gap between the superior and inferior kernels.These effects were largely due to the improved filling and starch accumulation of inferior kernels.However,there were no obvious differences in the kernel position effect among plants treated with CF,OFCF3,or OFCF4 in most cases.Leaf area indexes,post-silking photosynthetic rates,and net assimilation rates were higher in plants treated with OFCF1 or OFCF2 than in those treated with CF,reflecting an enhanced photosynthetic capacity and improved postsilking dry matter accumulation(DMA)in the plants treated with OFCF1 or OFCF2.Compared with the CF treatment,the OFCF1 and OFCF2 treatments increased post-silking N uptake by 66.3 and 75.5%,respectively,which was the major factor driving post-silking photosynthetic capacity and DMA.Moreover,the increases in root DMA and zeatin riboside content observed following the OFCF1 and OFCF2 treatments resulted in reduced root senescence,which is associated with an increased post-silking N uptake.Analyses showed that post-silking N uptake,DMA,and grain yield in summer maize were negatively correlated with the kernel position effect.In conclusion,the combined application of 15-30%organic fertilizer and 70-85%chemical fertilizer alleviated the kernel position effect in summer maize by improving post-silking N uptake and DMA.These results provide new insights into how CAOFCF can be used to improve maize productivity.

Game Theory Based Model for Predictive Analytics Using Distributed Position Function

This paper presents a game theory-based method for predicting the outcomes of negotiation and group decision-making problems. We propose an extension to the BDM model to address problems where actors’ positions are distributed over a position spectrum. We generalize the concept of position in the model to incorporate continuous positions for the actors, enabling them to have more flexibility in defining their targets. We explore different possible functions to study the role of the position function and discuss appropriate distance measures for computing the distance between the positions of actors. To validate the proposed extension, we demonstrate the trustworthiness of our model’s performance and interpretation by replicating the results based on data used in earlier studies.

Effects of baffle position in serpentine flow channel on the performance of proton exchange membrane fuel cells

This study used a three-dimensional numerical model of a proton exchange membrane fuel cell with five types of channels:a smooth channel(Case 1);eight rectangular baffles were arranged in the upstream(Case 2),midstream(Case 3),downstream(Case 4),and the entire cathode flow channel(Case 5)to study the effects of baffle position on mass transport,power density,net power,etc.Moreover,the effects of back pressure and humidity on the voltage were investigated.Results showed that compared to smooth channels,the oxygen and water transport facilitation at the diffusion layer-channel interface were added 11.53%-20.60%and 7.81%-9.80%at 1.68 A·cm^(-2)by adding baffles.The closer the baffles were to upstream,the higher the total oxygen flux,but the lower the flux uniformity the worse the water removal.The oxygen flux of upstream baffles was 8.14%higher than that of downstream baffles,but oxygen flux uniformity decreased by 18.96%at 1.68 A·cm^(-2).The order of water removal and voltage improvement was Case 4>Case 5>Case 3>Case 2>Case 1.Net power of Case 4 was 9.87%higher than that of the smooth channel.To the Case 4,when the cell worked under low back pressure or high humidity,the voltage increments were higher.The potential increment for the back pressure of 0 atm was 0.9%higher than that of 2 atm(1 atm=101.325 kPa).The potential increment for the humidity of 100%was 7.89%higher than that of 50%.

Chemical Composition of Pellonula leonensis Fish Oils from the Congo River Obtained by Soxhlet Extraction

The chemical composition of Pellonula leonensis fish oils from the Congo River (at Boko city) was carried out. The fatty acids were determined by gas chromatography. The Sn-2 position of fatty acids on glycerol was carried out by the ISO 6800 standard. The separation of the compounds (as free fatty acids, monoglycerides, diglycerides, triglycerides, sterols and methyl esters, etc.) was carried out by HPLC using gel permeation with refractometric detection. The phospholipid composition was by HPLC with an evaporative light scattering detector. We obtained oil contents of 32.10 (±0.46)%. The major fatty acids were Palmitic acid (27.41%) and oleic acid (24.23%). The SFA were of 44.50%. The MUFA represent 32.54% and PUFA 22.60%. Regarding the Sn-2 position on glycerol, 48.0% were by SFA and 51.3% were by unsaturated fatty acids. Among them 34.2% of fatty acids were 17.5% oleic acid molecules, 3.3% DHA molecules and 2.1% EPA molecules. Free fatty acids have contents of more than 62%, Diglycerides 16.63% and triglycerides 20.46%. Seven different phospholipids were identified, namely: Phosphatidylglycerol (PG), Phosphatidylethanolamine (PE), Phosphatidylinositol (PI), Phosphatidylcholine (PC), Sphingomyelin (SM), Lyso Phosphatitdylcholine (LPC) and Lyso Phosphatidylethanolamine (LPE). According to the high levels in position 2 of the glycerol of palmitic acid, the consumption of Pellonula leonensis fish could be moderate.

Advances in the Use of Prone Cardiopulmonary Resuscitation During Spinal Surgery in the Prone Position

Spinal surgery is usually performed in the prone position, which is a longer and more difficult procedure and is prone to complications such as circulatory dysfunction and stress injuries. Among them, stress injury is the main complication of prone spine surgery, but the reasons for stress injury in prone spine surgery are not clear, and whether prone cardiopulmonary resuscitation (CPR) can be used needs to be further verified. Supine cardiopulmonary resuscitation is commonly used in posterior spinal surgery, retroperitoneal surgery, and so on, which can effectively improve the patient’s hypoxemia. Such surgeries require a high level of anesthetic management, and cardiopulmonary resuscitation is necessary if a patient in a prone position experiences cardiac arrest. In the process of cardiopulmonary resuscitation, supine cardiopulmonary resuscitation is often used, especially for some obese patients, if they are immediately changed to the supine position, it takes up more time, there may be wound infection, and there is a possibility of missing the optimal rescue and resuscitation time. Based on this, this paper reviews the use of prone-position cardiopulmonary resuscitation for spinal surgery in the prone position.

Identity Study of English for Specific Purposes Teachers in the Context of Shifts in Public English Teaching Positioning

This study investigates the identity of English for Specific Purposes(ESP)teachers within the dynamic landscape of shifts in public English teaching positioning.Adopting a mixed-methods approach,qualitative and quantitative analyses were employed to explore the complexities of ESP teacher identity construction and adaptation.Qualitative findings revealed key themes including strong professional identity grounded in specialized expertise,the impact of changing educational policies and curriculum reforms,and the importance of cultural competence and intercultural communication.Quantitative analysis of survey data indicated high levels of job satisfaction among ESP teachers,with significant correlations between variables such as professional development participation,perceived efficacy in technology integration,and self-perceptions of identity as ESP educators.

Deformation caused by the 2011 eastern Japan great earthquake monitored using the GPS single-epoch precise point positioning technique

Crustal deformation can provide constraints for studying earthquake rupture and shock wave transmission for the Mw9.0 eastern Japan great earthquake. Using the single- epoch precise point positioning （PPP） method and the appropriate positioning flow, we process GPS data from six IGS （International GNSS Service） sites （e.g., MIZU, TSK2, USUD, MTKA, AIRA and KSMV） located in Japan and obtain the positioning results with centimeter scale precision. The displacement time series of the six sites are analyzed using the least squares spectral analysis method to estimate deformations caused by the Mw9.0 mainshock and the Mw7.9 aftershock, and the cumulative displacements after 1 day. Mainshock displacements at station MIZU, the nearest site to the mainshock in the North （N）, East （E）, and Up （U） directions, are -1.202 m, 2.180 m and -0.104 m, respectively, and the cumulative deformations after 1 day are -1.117 m, 2.071 m and -0.072 m, respectively. The displacements at station KSMV, the nearest site to the Mw7.9 aftershock in the N, E and U directions, are -0.032 m, 0.742 m and -0.345 m, respectively. The other sites obviously experienced eastern movements and subsidence. The deformation vectors indicate that the horizontal displacements caused by the earthquake point to the epicenter and rupture. Elastic bounds evidently took place at all sites. The results indicate that the crustal movements and earthquake were part of a megathrust caused by the Pacific Plate sinking under the North American Plate to the northeast of Japan island arc.

Cycle slip detection approach based on time-relative positioning theory

An efficient cycle slip detection method is proposed for high precision positioning and navigation results with global positioning system （GPS）,which is based on the assumption of a high sampling interval, measurement errors are so small that they can be ignored in the temporal single difference observables. And ambiguities are ordinarily equal to zero,but could be the number of cycles that have ＂slipped＂ if loss-of-lock has occurred.Therefore,cycle slips are estimated as parameters of time-relative positioning observation equations.Because the temporal single difference observables are taken at different epochs and different stations with a single GPS receiver,if time-relative positioning observation equations are linearized as that of conventional relative positioning,the design matrix will be rank defective.To obtain a stable linearization scheme,time-relative positioning observation equations are further analyzed,and the concept of virtual measurement is applied.A sample of data collected on a vehicle test shows that a cycle slip detection approach based on time-relative positioning theory can detect slips at the value of one cycle.The results also indicate if two satellites are so near to each other that they have the same equivalent to satellite-receiver geometry,cycle slip detection will be difficult and may get wrong results.Cycle slips of different satellites also affect detection by satellite-receiver geometry.

Criteria Selecting Knowledge Base in the FuzzyController of the Electrohydraulic Position Control System

Aim To analyse the influence of knowledge base on the performance of the fuzzy controller of the electrohydraulic position control system,and to determine their selection cri- teria. Methods Experiments based on different membership functions,scaling factors and con-trol rules were done separately.The experiment results and the influence of different know- ledge base on the control performance were analysed in theory so that criteria of selcting knowledge base can be summarized correctly.Results Knowledge base,including membershipfunctions, scaling factors and control rules,has a crucial effect on the fuzzy control system.Suitably selected knowledge base can lead to good control performance of fuzzy control sys-tem. Conclusion Being symmetric,having an intersection ratio of 1 and satisfying width con- dition are three necessities for selecting membership functions.Selecting scaling factors dependson both the system requirement and a comprehensive analysis in the overshoot,oscillation, rising time and stability. Integrity and continuity must be guaranteed when determining control rules.

Impedance force control for position controlled robotic manipulators under the constraint of unknown environments

A force control strategy for position controlled robotic manipulators is presented. On line force feedback data are employed to estimate the local shape of the unknown constraint. The estimated vectors are used to generate the virtual reference trajectory for the target impedance model that is driven by the force error to produce command position. By following the command position trajectory the robotic manipulator can follow the unknown constraint surface while keeping an acceptable force error in a manner depicted by the target impedance model. Computer simulation on a 3 linked planar manipulator and experimental studies on an Adept 3, an SCARA type robotic manipulator, are conducted to verify the force tracking capability of the proposed control strategy.

On the Study of the Translator's Position in Traditional Translation Theories

In traditional translation theories, the author and the translator, the original text and the translated text are in the binary oppositions. Both author-centeredness and text-centeredness are in authoritative positions. Moreover, there are some incorrect viewpoints about the translator's position in the traditional translation theories. In this case, this paper will analyze the translator's position in the traditional translation theories comprehensively.

Automatically positioning microseismic sources in mining by the stereo tomographic method using full wavefields

For microseisimic monitoring it is difficult to determine wave modes and their propagation velocity. In this paper, we propose a new method for automatically inverting in real time the source characteristics of microseismic events in mine engineering without wave mode identification and velocities. Based on the wave equation in a spherical coordinate system, we derive a tomographic imaging equation and formulate a scanning parameter selection criterion by which the microseisimic event maximum energy and corresponding parameters can be determined. By determining the maximum energy positions inside a given risk district, we can indentify microseismic events inside or outside the risk districts. The synthetic and field examples demonstrate that the proposed tomographic imaging method can automatically position microseismic events by only knowing the risk district dimensions and range of velocities without identifying the wavefield modes and accurate velocities. Therefore, the new method utilizes the full wavefields to automatically monitor microseismic events.

Position and complications of pedicle screw insertion with or without image-navigation techniques in the thoracolumbar spine:a meta-analysis of comparative studies

Computer-navigated pedicle screw insertion is applied to the thoracic and lumbar spine to attain high insertion accuracy and a low rate of screw-related complications.However,some in vivo and in vitro studies have shown that no advantages are gained with the use of navigation techniques compared to conventional techniques.Additionally,inconsistent conclusions have been drawn in various studies due to different population characteristics and methods used to assess the accuracy of screw placement.Moreover,it is not clear whether pedicle screw insertion with navigation techniques decreases the incidence of screw-related complications.Therefore,this study was sought to perform a meta-analysis of all available prospective evidence regarding pedicle screw insertion with or without navigation techniques in human thoracic and lumbar spine.We considered in vivo comparative studies that assessed the results of pedicle screw placement with or without navigation techniques.PubMed,Ovid MEDLINE and EMBASE databases were searched.Three published randomized controlled trials（RCTs） and nine retrospective comparative studies met the inclusion criteria.These studies included a total of 732 patients in whom 4,953 screws were inserted.In conclusion,accuracy of the position of grade I,II,III and IV screws and complication rate related to pedicle screw placement were significantly increased when navigation techniques were used in comparison to conventional techniques.Future research in this area should include RCTs with well-planned methodology to limit bias and report on validated,patient-based outcome measures.

Probable benign paroxysmal positional vertigo, spontaneously resolved:Incidence in medical practice, patients’ characteristics and the natural course

Background: Probable benign paroxysmal positional vertigo, spontaneously resolved (pBPPVsr), is a variant of benign paroxysmal positional vertigo (BPPV) in which there is no observable nystagmus and no vertigo with any positional maneuver. Objectives: To calculate the incidence pBPPVsr, compare the characteristics of the patients with pBPPVsr and BPPV not spontaneously resolved and describe the spontaneous resolution in the natural course of BPPV. Methods: Multicenter prospective descriptive study. During a one-year period, all patients with suspected BPPV that presented to the Neurotology Units of five participating centers were recruited. The incidence of pBPPVsr was calculated as a percentage of the total number of patients with BPPV. The prevalence of several variables was compared between pBPPVsr and BPPV not spontaneously resolved. The timing of spontaneous resolution was estimated using Kaplan-Meier curves. Results: 457 patients met the inclusion criteria. The incidence of pBPPVsr was 33.5%. It was significantly higher in males, in patients with normal bone mass and in patients who were not taking sulpiride. A rate of 18% of spontaneous resolution after the first month and 51% after the first year was found. This percentage did not change in a significant way after this moment. The curves for males, patients under 50 and patients with normal blood pressure decreased significantly faster. Conclusions: In our serie, BPPV spontaneously resolved in half of the patients with BPPV during the first year. This seemed to occur more commonly in males and could have been hindered by sulpiride intake, osteoporosis, advanced age and high blood pressure.

On the Systematic Position of Eosipterus yangi Ji et Ji,1997 among Pterodactyloids

A comparison of the new specimen with the holotype of Eosipterus from western Liaoning Province indicates that Eosipterus is a valid genus, which belongs to the family Ctenochasmatidae. The revised diagnosis of Eosipterus includes the wing span is less than 1.25 meters, the length of the ulna is nearly equal to these of wing phalanx 2 and the tibia, humerus is longer than tibia, and the ratio of metatarsal to tibia is approximately 0.40.