The location, intensity and scope of concentrated leakage must be determined in order to repair earth-Dam scoured by the leakage. In this paper, firstly, heat tracer theory and distribution laws of temperature in soil...The location, intensity and scope of concentrated leakage must be determined in order to repair earth-Dam scoured by the leakage. In this paper, firstly, heat tracer theory and distribution laws of temperature in soil body with leakage are discussed. Then temperature tracer model is established according to stable heat conduction theory. In such model, the concentrated seepage passage is simplified into a circular pipe as a boundary condition. The location, scope and flow-velocity of the concentrated leakage are estimated via ichnography of the lowest temperature based on temperature data from detecting wells by quantitative computation and qualitative analysis. In case study, the distribution characteristic of temperature (including temperature data of water in reservoir, drainage pipes and tail pond) can be interpreted by this model. A modified model is also set up, applied for detected data at different cross-sections of the leakage passage, in which the temperature data are rectified according to distances from data locations to calculating section. Finally, the model is solved by numerical iterative method, and the possible error of this theoretical model is discussed. The permeability coefficient in leakage area is identical with that of normal soil in magnitude after anti-seepage repairing accomplished, which indicates this model is effective.展开更多
BACKGROUND As one of the major abdominal operations,pancreaticoduodenectomy(PD)involves many organs.The operation is complex,and the scope of the operation is large,which can cause significant trauma in patients.The o...BACKGROUND As one of the major abdominal operations,pancreaticoduodenectomy(PD)involves many organs.The operation is complex,and the scope of the operation is large,which can cause significant trauma in patients.The operation has a high rate of complications.Pancreatic leakage is the main complication after PD.When pancreatic leakage occurs after PD,it can often lead to abdominal bleeding and infection,threatening the lives of patients.One study found that pancreatic leakage was affected by many factors including the choice of pancreaticojejunostomy method which can be well controlled.AIM To investigate the choice of operative methods for pancreaticojejunostomy and to conduct a multivariate study of pancreatic leakage in PD.METHODS A total of 420 patients undergoing PD in our hospital from January 2014 to March 2019 were enrolled and divided into group A(n=198)and group B(n=222)according to the pancreatointestinal anastomosis method adopted during the operation.Duct-to-mucosa pancreatojejunostomy was performed in group A and bundled pancreaticojejunostomy was performed in group B.The operation time,intraoperative blood loss,and pancreatic leakage of the two groups were assessed.The occurrence of pancreatic leakage after the operation in different patients was analyzed.RESULTS The differences in operative time and intraoperative bleeding between groups A and B were not significant(P>0.05).In group A,the time of pancreatojejunostomy was 26.03±4.40 min and pancreatic duct diameter was 3.90±1.10 mm.These measurements were significantly higher than those in group B(P<0.05).The differences in the occurrence of pancreatic leakage,abdominal infection,abdominal hemorrhage and gastric retention between group A and group B were not significant(P>0.05).The rates of pancreatic leakage in patients with preoperative albumin<30 g/L,preoperative jaundice time≥8 wk,and pancreatic duct diameter<3 mm,were 23.33%,33.96%,and 19.01%,respectively.These were significantly higher than those in patients with preoperative albumin≥30 g/L,preoperative jaundice time<8 wk,and pancreatic duct diameter≥3 cm(P<0.05).Logistic regression analysis showed that preoperative albumin<30 g/L,preoperative jaundice time≥8 wk,and pancreatic duct diameter<3 mm were risk factors for pancreatic leakage after PD(odds ratio=2.038,2.416 and 2.670,P<0.05).CONCLUSION The pancreatointestinal anastomosis method during PD has no significant effect on the occurrence of pancreatic leakage.The main risk factors for pancreatic leakage include preoperative albumin,preoperative jaundice time,and pancreatic duct diameter.展开更多
According to the structural characteristics of hazardous waste landfill, a new model based on the finite element method （FEM） is developed. The detection layer is considered as a sealed space and it is assumed that ...According to the structural characteristics of hazardous waste landfill, a new model based on the finite element method （FEM） is developed. The detection layer is considered as a sealed space and it is assumed that total current flows through the leak for the high resistivity of geomembrane liner. The leak current is regarded as a positive point current ＋I and the other current source is -I. Electrical potential of an arbitrary point in detection layer satisfies Poisson equation. Experiments for detecting leaks in liner were carried out. Excellent agreement between experimental data and simulated model data validates the new model. Parametric curves for a single leak show that with optimum selection of field survey parameters leaks can be detected effectively. For multiple leaks, the simulated results indicate that they are detectable when leak separation is larger than measurement spacing.展开更多
The magnetic field distribution characteristics of surface cracks with various widths are discussed based on finite element (FEM) results. The crack depth was 0.20 mm, the width range was from 0.02 to 1.00 mm. The res...The magnetic field distribution characteristics of surface cracks with various widths are discussed based on finite element (FEM) results. The crack depth was 0.20 mm, the width range was from 0.02 to 1.00 mm. The results showed that crack width and lift-off (the distance between surface and sensor) will influence signals. Discussed in this paper is the influence of various lift-off parameters on the peak to peak values of the normal component in magnetic flux leakage testing. The effects can be applied to evaluate surface breaking cracks of different widths and depths. An idea is presented to smooth narrow, sharp crack tips using alternating current (AC) field magnetization.展开更多
Several applications need high voltage and low rise time pulses that increasing of the voltage level can be done by using transformer. The rise time is increased because of transformer leakage inductance. One of the m...Several applications need high voltage and low rise time pulses that increasing of the voltage level can be done by using transformer. The rise time is increased because of transformer leakage inductance. One of the methods to decrease the rise time is using auxiliary windings between primary and secondary. In this paper, one type of pulse transformer included auxiliary windings is modeled and simulated in ANSYS software. In this study, at first the transformer has been simulated without auxiliary windings and the leakage and self inductances are obtained then the auxiliary windings are considered in the model to calculate the leakage and self inductances of the transformer. Simulation results can be used to investigate the effect of auxiliary winding on the leakage inductance.展开更多
This paper revisits the characteristics of windowing techniques with various window functions involved,and successively investigates spectral leakage mitigation utilizing the Welch method.The discrete Fourier transfor...This paper revisits the characteristics of windowing techniques with various window functions involved,and successively investigates spectral leakage mitigation utilizing the Welch method.The discrete Fourier transform(DFT)is ubiquitous in digital signal processing(DSP)for the spectrum analysis and can be efciently realized by the fast Fourier transform(FFT).The sampling signal will result in distortion and thus may cause unpredictable spectral leakage in discrete spectrum when the DFT is employed.Windowing is implemented by multiplying the input signal with a window function and windowing amplitude modulates the input signal so that the spectral leakage is evened out.Therefore,windowing processing reduces the amplitude of the samples at the beginning and end of the window.In addition to selecting appropriate window functions,a pretreatment method,such as the Welch method,is effective to mitigate the spectral leakage.Due to the noise caused by imperfect,nite data,the noise reduction from Welch’s method is a desired treatment.The nonparametric Welch method is an improvement on the periodogram spectrum estimation method where the signal-to-noise ratio(SNR)is high and mitigates noise in the estimated power spectra in exchange for frequency resolution reduction.The periodogram technique based on Welch method is capable of providing good resolution if data length samples are appropriately selected.The design of nite impulse response(FIR)digital lter using the window technique is rstly addressed.The inuence of various window functions on the Fourier transform spectrum of the signals is discussed.Comparison on spectral resolution based on the traditional power spectrum estimation and various window-function-based Welch power spectrum estimations is presented.展开更多
Bi3.25La0.75Ti3O12（BLT）thin films were prepared on Pt/Ti/SiO2/Si substrate by the sol-gel method.The effect of annealing on their structures and ferroelectric properties was investigated.The XRD patterns indicate th...Bi3.25La0.75Ti3O12（BLT）thin films were prepared on Pt/Ti/SiO2/Si substrate by the sol-gel method.The effect of annealing on their structures and ferroelectric properties was investigated.The XRD patterns indicate that the BLT films annealed at different temperatures are randomly orientated and the single perovskite phase is obtained at 550℃.The remmant polarization increnses and the coercive field decreases with the annealing temperature increasing.The leakage current density of the BLT films annealed at 700℃ is about 5.8×10^-8A/cm^2 at the electrie field of 250kv/cm.展开更多
We are interested in this work to electromagnetic leakage, for example the door of the microwave oven (or shielding of electronic functions working in the microwave band containing holes for ventilation circuit) which...We are interested in this work to electromagnetic leakage, for example the door of the microwave oven (or shielding of electronic functions working in the microwave band containing holes for ventilation circuit) which must be transparent (chain link) but the level of electromagnetic leakage issued by this device must not exceed certain standards. This work started with this article in which we are interested in a simple structure consisting of a multilayer structure incorporating a radiating aperture. We show in this paper mainly the interests of this study and the limitations of using these structures. Modeling of this device is provided by the wave concept iterative procedure (WCIP) which is simple to implement and is characterized by the fast execution method. The validation of our work is carried out by comparing our results with those calculated by the Ansoft HFSS software which shows a good agreement.展开更多
基金Financial support from the National Nature Science Foundation of China(50179009)National Nature Science Foundation of China for important project(50139030)
文摘The location, intensity and scope of concentrated leakage must be determined in order to repair earth-Dam scoured by the leakage. In this paper, firstly, heat tracer theory and distribution laws of temperature in soil body with leakage are discussed. Then temperature tracer model is established according to stable heat conduction theory. In such model, the concentrated seepage passage is simplified into a circular pipe as a boundary condition. The location, scope and flow-velocity of the concentrated leakage are estimated via ichnography of the lowest temperature based on temperature data from detecting wells by quantitative computation and qualitative analysis. In case study, the distribution characteristic of temperature (including temperature data of water in reservoir, drainage pipes and tail pond) can be interpreted by this model. A modified model is also set up, applied for detected data at different cross-sections of the leakage passage, in which the temperature data are rectified according to distances from data locations to calculating section. Finally, the model is solved by numerical iterative method, and the possible error of this theoretical model is discussed. The permeability coefficient in leakage area is identical with that of normal soil in magnitude after anti-seepage repairing accomplished, which indicates this model is effective.
基金Scientific Research Programme for Health Commission of Jiangxi Province,No.20204269.
文摘BACKGROUND As one of the major abdominal operations,pancreaticoduodenectomy(PD)involves many organs.The operation is complex,and the scope of the operation is large,which can cause significant trauma in patients.The operation has a high rate of complications.Pancreatic leakage is the main complication after PD.When pancreatic leakage occurs after PD,it can often lead to abdominal bleeding and infection,threatening the lives of patients.One study found that pancreatic leakage was affected by many factors including the choice of pancreaticojejunostomy method which can be well controlled.AIM To investigate the choice of operative methods for pancreaticojejunostomy and to conduct a multivariate study of pancreatic leakage in PD.METHODS A total of 420 patients undergoing PD in our hospital from January 2014 to March 2019 were enrolled and divided into group A(n=198)and group B(n=222)according to the pancreatointestinal anastomosis method adopted during the operation.Duct-to-mucosa pancreatojejunostomy was performed in group A and bundled pancreaticojejunostomy was performed in group B.The operation time,intraoperative blood loss,and pancreatic leakage of the two groups were assessed.The occurrence of pancreatic leakage after the operation in different patients was analyzed.RESULTS The differences in operative time and intraoperative bleeding between groups A and B were not significant(P>0.05).In group A,the time of pancreatojejunostomy was 26.03±4.40 min and pancreatic duct diameter was 3.90±1.10 mm.These measurements were significantly higher than those in group B(P<0.05).The differences in the occurrence of pancreatic leakage,abdominal infection,abdominal hemorrhage and gastric retention between group A and group B were not significant(P>0.05).The rates of pancreatic leakage in patients with preoperative albumin<30 g/L,preoperative jaundice time≥8 wk,and pancreatic duct diameter<3 mm,were 23.33%,33.96%,and 19.01%,respectively.These were significantly higher than those in patients with preoperative albumin≥30 g/L,preoperative jaundice time<8 wk,and pancreatic duct diameter≥3 cm(P<0.05).Logistic regression analysis showed that preoperative albumin<30 g/L,preoperative jaundice time≥8 wk,and pancreatic duct diameter<3 mm were risk factors for pancreatic leakage after PD(odds ratio=2.038,2.416 and 2.670,P<0.05).CONCLUSION The pancreatointestinal anastomosis method during PD has no significant effect on the occurrence of pancreatic leakage.The main risk factors for pancreatic leakage include preoperative albumin,preoperative jaundice time,and pancreatic duct diameter.
基金Project supported by the National High-Technology Research and Development Program of China(Grant No.2001AA644010)
文摘According to the structural characteristics of hazardous waste landfill, a new model based on the finite element method （FEM） is developed. The detection layer is considered as a sealed space and it is assumed that total current flows through the leak for the high resistivity of geomembrane liner. The leak current is regarded as a positive point current ＋I and the other current source is -I. Electrical potential of an arbitrary point in detection layer satisfies Poisson equation. Experiments for detecting leaks in liner were carried out. Excellent agreement between experimental data and simulated model data validates the new model. Parametric curves for a single leak show that with optimum selection of field survey parameters leaks can be detected effectively. For multiple leaks, the simulated results indicate that they are detectable when leak separation is larger than measurement spacing.
基金This work was sponsored by the National Natural Science Foundation of China (Grant No.50001006).
文摘The magnetic field distribution characteristics of surface cracks with various widths are discussed based on finite element (FEM) results. The crack depth was 0.20 mm, the width range was from 0.02 to 1.00 mm. The results showed that crack width and lift-off (the distance between surface and sensor) will influence signals. Discussed in this paper is the influence of various lift-off parameters on the peak to peak values of the normal component in magnetic flux leakage testing. The effects can be applied to evaluate surface breaking cracks of different widths and depths. An idea is presented to smooth narrow, sharp crack tips using alternating current (AC) field magnetization.
文摘Several applications need high voltage and low rise time pulses that increasing of the voltage level can be done by using transformer. The rise time is increased because of transformer leakage inductance. One of the methods to decrease the rise time is using auxiliary windings between primary and secondary. In this paper, one type of pulse transformer included auxiliary windings is modeled and simulated in ANSYS software. In this study, at first the transformer has been simulated without auxiliary windings and the leakage and self inductances are obtained then the auxiliary windings are considered in the model to calculate the leakage and self inductances of the transformer. Simulation results can be used to investigate the effect of auxiliary winding on the leakage inductance.
基金supported by the Ministry of Science and Technology,Taiwan[Grant Numbers MOST 104-2221-E-019-026-MY2 and MOST 108-2221-E019-013].
文摘This paper revisits the characteristics of windowing techniques with various window functions involved,and successively investigates spectral leakage mitigation utilizing the Welch method.The discrete Fourier transform(DFT)is ubiquitous in digital signal processing(DSP)for the spectrum analysis and can be efciently realized by the fast Fourier transform(FFT).The sampling signal will result in distortion and thus may cause unpredictable spectral leakage in discrete spectrum when the DFT is employed.Windowing is implemented by multiplying the input signal with a window function and windowing amplitude modulates the input signal so that the spectral leakage is evened out.Therefore,windowing processing reduces the amplitude of the samples at the beginning and end of the window.In addition to selecting appropriate window functions,a pretreatment method,such as the Welch method,is effective to mitigate the spectral leakage.Due to the noise caused by imperfect,nite data,the noise reduction from Welch’s method is a desired treatment.The nonparametric Welch method is an improvement on the periodogram spectrum estimation method where the signal-to-noise ratio(SNR)is high and mitigates noise in the estimated power spectra in exchange for frequency resolution reduction.The periodogram technique based on Welch method is capable of providing good resolution if data length samples are appropriately selected.The design of nite impulse response(FIR)digital lter using the window technique is rstly addressed.The inuence of various window functions on the Fourier transform spectrum of the signals is discussed.Comparison on spectral resolution based on the traditional power spectrum estimation and various window-function-based Welch power spectrum estimations is presented.
文摘Bi3.25La0.75Ti3O12（BLT）thin films were prepared on Pt/Ti/SiO2/Si substrate by the sol-gel method.The effect of annealing on their structures and ferroelectric properties was investigated.The XRD patterns indicate that the BLT films annealed at different temperatures are randomly orientated and the single perovskite phase is obtained at 550℃.The remmant polarization increnses and the coercive field decreases with the annealing temperature increasing.The leakage current density of the BLT films annealed at 700℃ is about 5.8×10^-8A/cm^2 at the electrie field of 250kv/cm.
文摘We are interested in this work to electromagnetic leakage, for example the door of the microwave oven (or shielding of electronic functions working in the microwave band containing holes for ventilation circuit) which must be transparent (chain link) but the level of electromagnetic leakage issued by this device must not exceed certain standards. This work started with this article in which we are interested in a simple structure consisting of a multilayer structure incorporating a radiating aperture. We show in this paper mainly the interests of this study and the limitations of using these structures. Modeling of this device is provided by the wave concept iterative procedure (WCIP) which is simple to implement and is characterized by the fast execution method. The validation of our work is carried out by comparing our results with those calculated by the Ansoft HFSS software which shows a good agreement.
