Theoretical and Experimental Quantification of Solar Radiation through a Tracking System

This work deals with the estimation of solar radiation through a solar tracker aimed at evaluating the effect of solar tracking on the solar deposit in Burkina Faso. Using a two-axis solar tracking system, we experimentally measured solar radiation at our Joseph KI-ZERBO University site and compared it with that obtained by a numerical simulation run using Fortran programming software based on a mathematical model by Brichambaut. The results obtained from the mathematical and experimental studies show that, with a solar tracker, on a clear-sky day, solar irradiation is between 800 W·m−2 and 1000 W·m−2 between about 8 a.m. and 4 p.m., i.e. a duration of 8 hours of insolation. Analysis of the numerical and experimental results shows very good quantitative and qualitative agreement, with an average relative error of 18%.

Trajectory tracking guidance of interceptor via prescribed performance integral sliding mode with neural network disturbance observer

This paper investigates interception missiles’trajectory tracking guidance problem under wind field and external disturbances in the boost phase.Indeed,the velocity control in such trajectory tracking guidance systems of missiles is challenging.As our contribution,the velocity control channel is designed to deal with the intractable velocity problem and improve tracking accuracy.The global prescribed performance function,which guarantees the tracking error within the set range and the global convergence of the tracking guidance system,is first proposed based on the traditional PPF.Then,a tracking guidance strategy is derived using the integral sliding mode control techniques to make the sliding manifold and tracking errors converge to zero and avoid singularities.Meanwhile,an improved switching control law is introduced into the designed tracking guidance algorithm to deal with the chattering problem.A back propagation neural network(BPNN)extended state observer(BPNNESO)is employed in the inner loop to identify disturbances.The obtained results indicate that the proposed tracking guidance approach achieves the trajectory tracking guidance objective without and with disturbances and outperforms the existing tracking guidance schemes with the lowest tracking errors,convergence times,and overshoots.

Theoretical Comparative Energy Efficiency Analysis of Dual Axis Solar Tracking Systems

This paper developed a theoretical model substantially based on the principle that only the normal component of solar radiation is actually converted into electrical energy. This theoretical model helped to predict minimum and maximum daily energy gain (compared to static PV system tilted with certain angle) when using dual axis PV solar tracking systems, at any given location on earth without prior experimental data. Based on equations derived from model, minimum and maximum energy gain is computed and summarized in tables of minimum and maximum. Furthermore, the model equations could be used to set up future experimental studies related to the matter.

The Conceptual Design Experience of Sea-Going Ships with Alternative Propulsion System, Equipped with Dual-Mode Contra Propeller

The paper presents a technical solution which provides energy saving at full speed, as well as duplication of screw propeller and main propulsion system incase it＇s out of order. The description of the corresponding device, designed for transport refrigerator ship, is shown as well as its location on board. Value of energy saving from the use of contra propeller is estimated. The results of the assessment required power to move the ship at low speed by the action of the contra propeller operating in the reactive mode are demonstrated. It is shown, that the ship equipped with the proposed device will get the additional class notation related to the redundancy or duplication of the propulsion system of Russian Maritime Register of Shipping.

High-speed tracked vehicle model order reduction for static and dynamic simulations

In this paper, a model order reduction strategy is adopted for the static and dynamic behaviour simulation of a high-speed tracked vehicle. The total number of degree of freedom of the structure is condensed through a selection of interface degrees of freedom and significant global mode shapes, for an approximated description of vehicle dynamic behaviour. The methodology is implemented in a customised open-source software to reduce the computational efforts. The modelled tracked vehicle includes the sprung mass, the unsprung masses, connected by means of torsional bars, and all the track assemblies, composing the track chain. The proposed research activity presents a comprehensive investigation of the influence of the track chain, combined with longitudinal vehicle speed, on statics and vehicle dynamics, focusing on vertical dynamics. The vehicle response has been investigated both in frequency and time domain. In this last case road-wheel displacements are assumed as inputs for the model, under different working conditions, hence considering several road profiles with different amplitudes and characteristic excitation frequencies. Simulation results have proven a high fidelity in model order reduction approach and a significant contribution of the track chain in the global dynamic behaviour of the tracked vehicle.

Sliding-Mode-Based Attitude Tracking Control of Spacecraft Under Reaction Wheel Uncertainties

The attitude tracking operations of an on-orbit spacecraft with degraded performance exhibited by potential actuator uncertainties(including failures and misalignments) can be extraordinarily challenging. Thus, the control law development for the attitude tracking task of spacecraft subject to actuator(namely reaction wheel) uncertainties is addressed in this paper. More specially, the attitude dynamics model of the spacecraft is firstly established under actuator failures and misalignment(without a small angle approximation operation). Then, a new non-singular sliding manifold with fixed time convergence and anti-unwinding properties is proposed, and an adaptive sliding mode control(SMC) strategy is introduced to handle actuator uncertainties, model uncertainties and external disturbances simultaneously. Among this, an explicit misalignment angles range that could be treated herein is offered. Lyapunov-based stability analyses are employed to verify that the reaching phase of the sliding manifold is completed in finite time, and the attitude tracking errors are ensured to converge to a small region of the closest equilibrium point in fixed time once the sliding manifold enters the reaching phase. Finally, the beneficial features of the designed controller are manifested via detailed numerical simulation tests.

Adaptive Trajectory Tracking Control for Nonholonomic Wheeled Mobile Robots:A Barrier Function Sliding Mode Approach

The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.

Adaptive state-constrained/model-free iterative sliding mode control for aerial robot trajectory tracking

This paper develops a novel hierarchical control strategy for improving the trajectory tracking capability of aerial robots under parameter uncertainties.The hierarchical control strategy is composed of an adaptive sliding mode controller and a model-free iterative sliding mode controller(MFISMC).A position controller is designed based on adaptive sliding mode control(SMC)to safely drive the aerial robot and ensure fast state convergence under external disturbances.Additionally,the MFISMC acts as an attitude controller to estimate the unmodeled dynamics without detailed knowledge of aerial robots.Then,the adaption laws are derived with the Lyapunov theory to guarantee the asymptotic tracking of the system state.Finally,to demonstrate the performance and robustness of the proposed control strategy,numerical simulations are carried out,which are also compared with other conventional strategies,such as proportional-integralderivative(PID),backstepping(BS),and SMC.The simulation results indicate that the proposed hierarchical control strategy can fulfill zero steady-state error and achieve faster convergence compared with conventional strategies.

Using IoT to Smart Security Door System with Face Tracking Camera

Security is a serious concern, whether it may be the security of assets, data and human life. Providing humans with security and safety for their belongings and items is an important need. A smart lock door project/ with different types of methods for entry, like fingerprint and authentication PIN code is suggested with an unnoticeable face tracking camera capturing a photo in case of error data entry. It is to be controlled via the user’s smartphone using Blynk with the implementation of IoT. This technology is made with two microcontrollers. ESP32 is used to control the solenoid lock, fingerprint sensor and keypad. ESP32-CAM is used to capture a photo and send it to the owner’s smartphone to be viewed on Telegram application. Many conclusions are extracted from system results, as well as suggested ideas for future work.

Event-Triggered Sliding Mode Control for Trajectory Tracking of Nonlinear Systems

In this paper, an event-triggered sliding mode control approach for trajectory tracking problem of nonlinear input affine system with disturbance has been proposed. A second order robotic manipulator system has been modeled into a general nonlinear input affine system. Initially, the global asymptotic stability is ensured with conventional periodic sampling approach for reference trajectory tracking. Then the proposed approach of event-triggered sliding mode control is discussed which guarantees semi-global uniform ultimate boundedness. The proposed control approach guarantees non-accumulation of control updates ensuring lower bounds on inter-event triggering instants avoiding Zeno behavior in presence of the disturbance. The system shows better performance in terms of reduced control updates, ensures system stability which further guarantees optimization of resource usage and cost. The simulation results are provided for validation of proposed methodology for tracking problem by a robotic manipulator. The number of aperiodic control updates is found to be approximately 44% and 61% in the presence of constant and time-varying disturbances respectively.

SINGULAR ANALYSIS OF BIFURCATION OF NONLINEAR NORMAL MODES FOR A CLASS OF SYSTEMS WITH DUAL INTERNAL RESONANCES

The nonlinear normal modes (NNMs) associated with integrnal resonance can be classified into two kinds: uncoupled and coupled. The bifurcation problem of the coupled NNM of system with 1 : 2 : 5 dual internal resonance is in two variables. The singular analysis of it is presented after separating the two variables by taking advantage of Maple algebra, and some new bifurcation patterns are found. Different from the NNMs of systems with single internal resonance, the number of the NNMs of systems with dual internal resonance may be more or less than the number of the degrees of freedom. At last, it is pointed out that bifurcation problems in two variables can be conveniently solved by separating variables as well as using coupling equations.

Effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids by using the Lord-Shulman and dual-phase-lag models

The effects of rotation and gravity on an electro-magneto-thermoelastic medium with diffusion and voids in a generalized thermoplastic half-space are studied by using the Lord-Shulman (L-S) model and the dual-phase-lag (DPL) model. The analytical solutions for the displacements, stresses, temperature, diffusion concentration, and volume fraction field with different values of the magnetic field, the rotation, the gravity, and the initial stress are obtained and portrayed graphically. The results indicate that the effects of gravity, rotation, voids, diffusion, initial stress, and electromagnetic field are very pronounced on the physical properties of the material.

Probe into the double track system reform of the old age insurance system

In recent years, with the development of socialist market economy is gradually perfect, the endowment insurance system gradually affects people＇s daily life, the old-age insurance benefits of the ＂dual track＂ operation of the drawbacks caused by more and more people＇s attention, so the old-age insurance system reform, not only is the national endowment for the special requirements of self. It is the realization of China＇s social security reform priority among priorities. Based on the endowment insurance system of endowment insurance system reform, the interpretation of the resistance, found that at present our country how to deal with the problems of merger reform, discuss how to better realize the merger of the pension insurance system.

Adaptive Backstepping Slide Mode Control of Pneumatic Position Servo System

With the price decreasing of the pneumatic proportional valve and the high performance micro controller, the simple structure and high tracking performance pneumatic servo system demonstrates more application potential in many fields. However, most existing control methods with high tracking performance need to know the model information and to use pressure sensor. This limits the application of the pneumatic servo system. An adaptive backstepping slide mode control method is proposed for pneumatic position servo system. The proposed method designs adaptive slide mode controller using backstepping design technique. The controller parameter adaptive law is derived from Lyapunov analysis to guarantee the stability of the system. A theorem is testified to show that the state of closed-loop system is uniformly bounded, and the closed-loop system is stable. The advantages of the proposed method include that system dynamic model parameters are not required for the controller design, uncertain parameters bounds are not need, and the bulk and expensive pressure sensor is not needed as well. Experimental performance, as compared with some existing methods. results show that the designed controller can achieve better tracking

Adaptive backstepping finite-time sliding mode control of spacecraft attitude tracking

This paper investigates the finite-time attitude tracking problem for rigid spacecraft. Two backstepping finite-time slid- ing mode control laws are proposed to solve this problem in the presence of inertia uncertainties and external disturbances. The first control scheme is developed by combining sliding mode con- trol with a backstepping technique to achieve fast and accurate tracking responses. To obtain higher tracking precision and relax the requirement of the upper bounds on the uncertainties, a se- cond control law is also designed by combining the second or- der sliding mode control and an adaptive backstepping technique. This control law provides complete compensation of uncertainty and disturbances. Although it assumes that the uncertainty and disturbances are bounded, the proposed control law does not require information about the bounds on the uncertainties and disturbances. Finite-time convergence of attitude tracking errors and the stability of the closed-loop system are ensured by the Lya- punov approach. Numerical simulations on attitude tracking control of spacecraft are provided to demonstrate the performance of the proposed controllers.

Adaptive Robust Motion Trajectory Tracking Control of Pneumatic Cylinders with LuGre Model-based Friction Compensation

Friction compensation is particularly important for motion trajectory tracking control of pneumatic cylinders at low speed movement. However, most of the existing model-based friction compensation schemes use simple classical models, which are not enough to address applications with high-accuracy position requirements. Furthermore, the friction force in the cylinder is time-varying, and there exist rather severe unmodelled dynamics and unknown disturbances in the pneumatic system. To deal with these problems effectively, an adaptive robust controller with LuGre model-based dynamic friction compensation is constructed. The proposed controller employs on-line recursive least squares estimation（RLSE） to reduce the extent of parametric uncertainties, and utilizes the sliding mode control method to attenuate the effects of parameter estimation errors, unmodelled dynamics and disturbances. In addition, in order to realize LuGre model-based friction compensation, the modified dual-observer structure for estimating immeasurable friction internal state is developed. Therefore, a prescribed motion tracking transient performance and final tracking accuracy can be guaranteed. Since the system model uncertainties are unmatched, the recursive backstepping design technology is applied. In order to solve the conflicts between the sliding mode control design and the adaptive control design, the projection mapping is used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Finally, the proposed controller is tested for tracking sinusoidal trajectories and smooth square trajectory under different loads and sudden disturbance. The testing results demonstrate that the achievable performance of the proposed controller is excellent and is much better than most other studies in literature. Especially when a 0.5 Hz sinusoidal trajectory is tracked, the maximum tracking error is 0.96 mm and the average tracking error is 0.45 mm. This paper constructs an adaptive robust controller which can compensate the friction force in the cylinder.

Mode switching control strategy of dual motors coupled driving on electric vehicles

Based on analyzing the structure and working principle on electric vehicles （EVs） with dual motors coupled by planetarY gears, the control strategy of mode switching was proposed. The power interruption problem on EVs with automatic mechanical transmission （AMT） shifting was resolved. Based on the speed-torque characteristics of the planetary gears and the principle of the auxiliary motor＇ s zero speed braking, control features of mode switching were introduced. The mode shifting between the main motor mode and dual motors coupled driving were studied. Matlab/Simulink was adopted as a platform to develop the simulation model of EVs with dual motors drive system and 3 gears AMT. Simulation results demonstrated that the power interruption of dual motors drive system was solved during mode switching. The power requirements of EVs were satisfied, too.

Design of a Networked Tracking Control System With a Data-based Approach

Tracking control is a very challenging problem in the networked control system(NCS), especially for the process with blurred mechanism and where only input-output data are available. This paper has proposed a data-based design approach for the networked tracking control system(NTCS). The method utilizes the input-output data of the controlled process to establish a predictive model with the help of fuzzy cluster modelling(FCM)technology. Then, the deduced error and error change in the future are treated as inputs of a fuzzy sliding mode controller(FSMC) to obtain a string of future control actions. These candidate control actions in the controller side are delivered to the plant side. Thus, the network induced time delays are compensated by selecting appropriate control action. Simulation outputs prove the validity of the proposed method.

Tracking consensus for nonlinear heterogeneous multi-agent systems subject to unknown disturbances via sliding mode control

We investigate the tracking control for a class of nonlinear heterogeneous leader-follower multi-agent systems（MAS）with unknown external disturbances. Firstly, the neighbor-based distributed finite-time observers are proposed for the followers to estimate the position and velocity of the leader. Then, two novel distributed adaptive control laws are designed by means of linear sliding mode（LSM） as well as nonsingular terminal sliding mode（NTSM）, respectively. One can prove that the tracking consensus can be achieved asymptotically under LSM and the tracking error can converge to a quite small neighborhood of the origin in finite time by NTSM in spite of uncertainties and disturbances. Finally, a simulation example is given to verify the effectiveness of the obtained theoretical results.

Modeling of Ad-hoc and Infrastructure Dual Mode Mobile Networks

This paper investigates a mobile telecommunications system that supports both ad hoc and infrastructure mode operations. Based on analytic and simulation models, our study investigates how base station (BS) and ad hoc channel capacity, and the mobility and locality of mobile stations affect the performance of a dual mode system. We show that a dual mode system can significantly outperform a single mode (infrastructure) system when the degree of locality is high. Furthermore, a dual mode system can support much faster mobile users with less BS channels in comparison to an infrastructure mode system. Our study quantitatively identifies the threshold value for the number of ad hoc channels such that beyond this threshold, increasing ad hoc channel capacity will not improve the performance of a dual mode system. Keywords Ad-hoc - infrastructure - dual mode system Yi-Hung Chen received B.S. degree in 2001 and M.S. degree in 2003 of Computer Science and Information Engineering from National Chiao Tung University, HsinChu, Taiwan. He is an engineer of QUALCOMM CDMA technologies Taiwan.His research interests include wireless communication and ad-hoc networking.Hui-Nien Hung received the B.S. degree in mathematics from the National Taiwan University, Taipei, Taiwan, in 1989, the M.S. in mathematics degree from National Tsin-Hua University, Hsinchu, Taiwan, in 1991, and the Ph.D. degree in statistics from the University of Chicago, Chicago, IL, in 1996. He is a Professor at the Institute of Statistics, National Chiao Tung University, Taiwan.His current research interests include applied probability, financial calculus, bioinformatics, statistical inference, statistical computing, and industrial statistics. Yi-Bing Lin (M’96-SM’96-F’04) is Chair Professor and Vice President of Research and Development, National Chiao Tung University.His current research interests include wireless communications and mobile computing Dr. Lin has published over 190 journal articles and more than 200 conference papers. His current research interests include wireless communications and mobile computing Dr. Lin has published over 190 journal articles and more than 200 conference papers. Lin is coauthor of the book Wireless and Mobile Network Architecture (with Imrich Chlamtac; published by John Wiley & Sons). Lin is an IEEE Fellow, an ACM Fellow, an AAAS Fellow, and an IEE Fellow.