The Sulu ultra-high pressure(UHP)metamorphic belt in Eastern China is well known as the eastern extension of the Qingling-Dabie orogenic belt formed by subduction and collision between the Sino-Korean and Yangtze crat...The Sulu ultra-high pressure(UHP)metamorphic belt in Eastern China is well known as the eastern extension of the Qingling-Dabie orogenic belt formed by subduction and collision between the Sino-Korean and Yangtze cratons.The main hole of the Chinese Continental Scientific Drilling(CCSD)project is located at the southern segment of the Sulu UHP metamorphic belt(34°25′N/118°40′E),about 17 km southwest of Donghai County.Integrated geophysical investigations using gravity,magnetic,deep展开更多
A large-scale high-pressure granulite belt (HPGB), more than 700 km long, is recognized within the metamorphic basement of the North China craton. In the regional tectonic framework, the Hengshan-Chengde HPGB is locat...A large-scale high-pressure granulite belt (HPGB), more than 700 km long, is recognized within the metamorphic basement of the North China craton. In the regional tectonic framework, the Hengshan-Chengde HPGB is located in the central collision belt between the western block and eastern block, and represents the deep crustal structural level. The typical high-pressure granulite (HPG) outcrops are distributed in the Hengshan and Chengde areas. HPGs commonly occur as mafic xenoliths within ductile shear zones, and underwent multipile deformations. To the south, the Hengshan-Chengde HPGB is juxtaposed with the Wutai greenstone belt by several strike-slip shear zones. Preliminary isotopic age dating indicates that HPGs from North China were mainly generated at the end of the Neoarchaean, assocaited with tectonic assembly of the western and eastern blocks.展开更多
Unusual polyphase inclusions of K-feldspar+quartz+titanite+solid salt and K-feldspar+albite+quartz+epidote with textures similar to the other K-feldspar+quartz inclusions were found in omphacite grains from the Sulu u...Unusual polyphase inclusions of K-feldspar+quartz+titanite+solid salt and K-feldspar+albite+quartz+epidote with textures similar to the other K-feldspar+quartz inclusions were found in omphacite grains from the Sulu ultrahigh pressure (UHP) eclogites. One of these inclusions contain square to round solid salt inclusions of KCl-NaCl composition. Such a mineral assemblage within K-feldspar-bearing inclusions hosted by UHP metamorphic phases suggests that (1) potassium granitic melts enriched in Cl components were presented during UHP metamorphism or at the early stage of rapid exhumation of deeply subducted continental slab; (2) they were resulted from reactions between the incoming granitic melts and quartz (or coesite); and (3) solid salt inclusions of NaCl-KCl were derived from dehydration and desiccation of Cl-bearing melts. Our new observations further demonstrate that during the tectonic evolution of UHP rocks, fertile components within deeply subducted continental materials could undergo partial melting, leading to the formation of Cl-bearing potassium granitic melts and substantial migration of fluid-conservative elements (e.g. Ti, Hf) within the UHP slab.展开更多
ABSTRACT： A wide variety of tectonic models have been invoked to explain the exhumation of the world＇s largest ultrahigh pressure （UHP） orogenic belt, the Qinling Dabieshan Sulu belt in China, and its correlat...ABSTRACT： A wide variety of tectonic models have been invoked to explain the exhumation of the world＇s largest ultrahigh pressure （UHP） orogenic belt, the Qinling Dabieshan Sulu belt in China, and its correlatives in Korea. Most of these models assume that the orogen contains one main collisional suture between the North and South China cratons that collided in the Mesozoic. New field data reveal that this model is too simplistic, and that the collision involved an additional mi- croplate, which initially rifted off the Yangtze craton. This continental microplate was partially sub- ducted beneath an active margin on the North China craton, and subsequently an additional active Andean-style margin developed on the southern margin of the Qinling microplate after collision, leav- ing the near-vertical microplate wedged between the two thickened and thermally softened margins. The thermo-mechanical environment of collision thus left a cold, thick, and buoyant microplate wedged between two easily deformed margins, which acted as power-law creep channels, accommodating rapid buoyancy-driven rise of a 2 000 km long wedge of the subducted microplate, which became intimately involved with the collisional process. An addi- tional segment of the northern Yangtze craton was subducted to ~100 kin, and formed a separate wedge that rose alongside the thermally softened margin of the Qinling mieroeontinent, and was bordered on the south by the recently thermally- softened rift zone where the Qinling mieroeonti- nent broke off the Yangtze eraton between Late Devonian and Permian times. Recognizing the dual active margins in Qinling-Dabieshan-Sulu orogen and the thermally-softened power-law creep channels sheds new light on understanding exhumation of the world＇s largest ultrahigh pressure belt. We propose that this model is generally applicable to other UHP belts worldwide.展开更多
Combined with field studies, microscopic observations, and EBSD fabric analysis, we defined a possible Early Cretaceous metamorphic core complex （MCC） in the Wulian area along the Sulu orogenic belt in eastern China...Combined with field studies, microscopic observations, and EBSD fabric analysis, we defined a possible Early Cretaceous metamorphic core complex （MCC） in the Wulian area along the Sulu orogenic belt in eastern China. The MCC is of typical Cordilleran type with five elements： （1） a master detachment fault and sheared rocks beneath it, a lower plate of crystalline rockswith （2） middle crust metamorphic rocks, （3） syn-kinematic plutons, （4） an upper plate of weakly deformed Proterozoic metamorphic rocks, and （5） Cretaceous volcanic-sedimentary rocks in the supradetachment basin. Some postkinematic incursions cut across the master detachment fault zone and two plates. In the upper plate, Zhucheng （诸城） Basin basement consists of the Proterozoic Fenzishan （粉子山） Group, Jinning period granite （762–834 Ma）. The s u pr a de tac hme nt ba sin a bo ve the Proterozoic rocks is filled with the Early Cretaceous Laiyang （莱阳） （~135–125 Ma） and Qingshan （青山） groups （120–105 Ma）, as wellas the Late Cretaceous Wangshi （王氏） Group （85–65 Ma）. The detachment fault zone is developed at the base and margin of the superposed basin. Pseudotachylite and micro breccia layers located at the top of the detachment fault. Stretching lineation and foliation are well developed in the ductile shear belt in the detachment faults. The stretching lineation indicates a transport direction of nearly east to west on the whole, while the foliations trend WNW, WSW, and SE. Protomylonite, mylonite, and ultramylonite are universally developed in the faults, transitioning to mylonitic gneiss, and finally to gneiss downward. Microstructure and quartz preferred orientation show that the mylonites formed at high greenschist facies to low greenschist facies as a whole. The footwall metamorphic rock series of the Wulian MCC are chiefly UHP （ultrahigh pressure） metamorphic rocks. Syntectonic rocks developed simultaneously with the Wulian MCC detachment and extension. Geological research has demonstrated that the MCC is associated with small-scale intrusive rocks developing in the vicinity of the detachment faults, for instance, dike. Geochronology results indicate that the denudation of the Wulian MCC occurred at about 135–122 Ma. Its development and exhumation was irrelevant to the Sulu UHP metamorphism zone rapid exhumation during Triassic Period but resulted from the crustal extension of North China Craton and adjacent area.展开更多
The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity...The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.展开更多
文摘The Sulu ultra-high pressure(UHP)metamorphic belt in Eastern China is well known as the eastern extension of the Qingling-Dabie orogenic belt formed by subduction and collision between the Sino-Korean and Yangtze cratons.The main hole of the Chinese Continental Scientific Drilling(CCSD)project is located at the southern segment of the Sulu UHP metamorphic belt(34°25′N/118°40′E),about 17 km southwest of Donghai County.Integrated geophysical investigations using gravity,magnetic,deep
文摘A large-scale high-pressure granulite belt (HPGB), more than 700 km long, is recognized within the metamorphic basement of the North China craton. In the regional tectonic framework, the Hengshan-Chengde HPGB is located in the central collision belt between the western block and eastern block, and represents the deep crustal structural level. The typical high-pressure granulite (HPG) outcrops are distributed in the Hengshan and Chengde areas. HPGs commonly occur as mafic xenoliths within ductile shear zones, and underwent multipile deformations. To the south, the Hengshan-Chengde HPGB is juxtaposed with the Wutai greenstone belt by several strike-slip shear zones. Preliminary isotopic age dating indicates that HPGs from North China were mainly generated at the end of the Neoarchaean, assocaited with tectonic assembly of the western and eastern blocks.
基金supported by the SinoProbe Project (SinoProbe-2-6)the National Natural Science Foundation of China (41073024 and 40872048)
文摘Unusual polyphase inclusions of K-feldspar+quartz+titanite+solid salt and K-feldspar+albite+quartz+epidote with textures similar to the other K-feldspar+quartz inclusions were found in omphacite grains from the Sulu ultrahigh pressure (UHP) eclogites. One of these inclusions contain square to round solid salt inclusions of KCl-NaCl composition. Such a mineral assemblage within K-feldspar-bearing inclusions hosted by UHP metamorphic phases suggests that (1) potassium granitic melts enriched in Cl components were presented during UHP metamorphism or at the early stage of rapid exhumation of deeply subducted continental slab; (2) they were resulted from reactions between the incoming granitic melts and quartz (or coesite); and (3) solid salt inclusions of NaCl-KCl were derived from dehydration and desiccation of Cl-bearing melts. Our new observations further demonstrate that during the tectonic evolution of UHP rocks, fertile components within deeply subducted continental materials could undergo partial melting, leading to the formation of Cl-bearing potassium granitic melts and substantial migration of fluid-conservative elements (e.g. Ti, Hf) within the UHP slab.
基金supported by the National Natural Science Foundation of China (Nos.91014002,40821061,40802045)the Science Foundation of Shandong Province,China (No.Q2008E03)+1 种基金the Special Financial Grant from China Postdoctoral Science Foundation (No.201104495)Ministry of Education of China (No.B07039)
文摘ABSTRACT： A wide variety of tectonic models have been invoked to explain the exhumation of the world＇s largest ultrahigh pressure （UHP） orogenic belt, the Qinling Dabieshan Sulu belt in China, and its correlatives in Korea. Most of these models assume that the orogen contains one main collisional suture between the North and South China cratons that collided in the Mesozoic. New field data reveal that this model is too simplistic, and that the collision involved an additional mi- croplate, which initially rifted off the Yangtze craton. This continental microplate was partially sub- ducted beneath an active margin on the North China craton, and subsequently an additional active Andean-style margin developed on the southern margin of the Qinling microplate after collision, leav- ing the near-vertical microplate wedged between the two thickened and thermally softened margins. The thermo-mechanical environment of collision thus left a cold, thick, and buoyant microplate wedged between two easily deformed margins, which acted as power-law creep channels, accommodating rapid buoyancy-driven rise of a 2 000 km long wedge of the subducted microplate, which became intimately involved with the collisional process. An addi- tional segment of the northern Yangtze craton was subducted to ~100 kin, and formed a separate wedge that rose alongside the thermally softened margin of the Qinling mieroeontinent, and was bordered on the south by the recently thermally- softened rift zone where the Qinling mieroeonti- nent broke off the Yangtze eraton between Late Devonian and Permian times. Recognizing the dual active margins in Qinling-Dabieshan-Sulu orogen and the thermally-softened power-law creep channels sheds new light on understanding exhumation of the world＇s largest ultrahigh pressure belt. We propose that this model is generally applicable to other UHP belts worldwide.
基金supported by the National Natural Science Foundation of China(Nos.90814006,91214301)the Natural Science Foundation of Shandong Province(No.ZR2009EQ002)+1 种基金the Foundation of the Shandong Provincial Key Laboratory of Depositional Mineralization & Sedimentary Minerals(No.DMSM201005)the National Key Basic Research Development Program (973Program) of China(No.2012CB723104)
文摘Combined with field studies, microscopic observations, and EBSD fabric analysis, we defined a possible Early Cretaceous metamorphic core complex （MCC） in the Wulian area along the Sulu orogenic belt in eastern China. The MCC is of typical Cordilleran type with five elements： （1） a master detachment fault and sheared rocks beneath it, a lower plate of crystalline rockswith （2） middle crust metamorphic rocks, （3） syn-kinematic plutons, （4） an upper plate of weakly deformed Proterozoic metamorphic rocks, and （5） Cretaceous volcanic-sedimentary rocks in the supradetachment basin. Some postkinematic incursions cut across the master detachment fault zone and two plates. In the upper plate, Zhucheng （诸城） Basin basement consists of the Proterozoic Fenzishan （粉子山） Group, Jinning period granite （762–834 Ma）. The s u pr a de tac hme nt ba sin a bo ve the Proterozoic rocks is filled with the Early Cretaceous Laiyang （莱阳） （~135–125 Ma） and Qingshan （青山） groups （120–105 Ma）, as wellas the Late Cretaceous Wangshi （王氏） Group （85–65 Ma）. The detachment fault zone is developed at the base and margin of the superposed basin. Pseudotachylite and micro breccia layers located at the top of the detachment fault. Stretching lineation and foliation are well developed in the ductile shear belt in the detachment faults. The stretching lineation indicates a transport direction of nearly east to west on the whole, while the foliations trend WNW, WSW, and SE. Protomylonite, mylonite, and ultramylonite are universally developed in the faults, transitioning to mylonitic gneiss, and finally to gneiss downward. Microstructure and quartz preferred orientation show that the mylonites formed at high greenschist facies to low greenschist facies as a whole. The footwall metamorphic rock series of the Wulian MCC are chiefly UHP （ultrahigh pressure） metamorphic rocks. Syntectonic rocks developed simultaneously with the Wulian MCC detachment and extension. Geological research has demonstrated that the MCC is associated with small-scale intrusive rocks developing in the vicinity of the detachment faults, for instance, dike. Geochronology results indicate that the denudation of the Wulian MCC occurred at about 135–122 Ma. Its development and exhumation was irrelevant to the Sulu UHP metamorphism zone rapid exhumation during Triassic Period but resulted from the crustal extension of North China Craton and adjacent area.
文摘The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.
