In order to study selection indices for improving rice grain yield, a cross was made between an Iranian traditional rice (Oryza sativa L.) variety, Tarommahalli and an improved indica rice variety, Khazar in 2006. The...In order to study selection indices for improving rice grain yield, a cross was made between an Iranian traditional rice (Oryza sativa L.) variety, Tarommahalli and an improved indica rice variety, Khazar in 2006. The traits of the parents (30 plants), F1 (30 plants) and F2 generations (492 individuals) were evaluated at the Rice Research Institute of Iran (RRII) during 2007. Heritabilities of the number of panicles per plant, plant height, days to heading and panicle exsertion were greater than that of grain yield. The selection indices were developed using the results of multivariate analysis. To evaluate selection strategies to maximize grain yield, 14 selection indices were calculated based on two methods (optimum and base) and combinations of 12 traits with various economic weights. Results of selection indices showed that selection for grain weight, number of panicles per plant and panicle length by using their phenotypic and/or genotypic direct effects (path coefficient) as economic weights should serve as an effective selection criterion for using either the optimum or base index.展开更多
The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was propo...The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.展开更多
Fluvial landforms in the Anhui section of the Changjiang(Yangtze)River are often considered as the main factors for frequent floods.It is these special landforms that influence the channel changes of the Changjiang Ri...Fluvial landforms in the Anhui section of the Changjiang(Yangtze)River are often considered as the main factors for frequent floods.It is these special landforms that influence the channel changes of the Changjiang River.Using Landsat TM image of 2000,this paper conducted a series of image processing,including principal component analysis,multi-spectral composition,gray value statistics,and spectral analysis of ground objects.Then it got a new interpretation map of different kinds of fluvial landforms of the Changjiang River in the Anhui section.Based on the interpretation mentioned above,the paper analyzes the distribution and characteristics of such typical landforms as terraces,floodplains and battures,and their functions on the changes of river channel.The results show a consistence with the earlier conclusion that the Anhui section of the Changjiang River tends to deflect gradually toward south,which provides more implications for further study on the geomorphologic evolution of the river channel.展开更多
针对钢渣体积稳定性差、钢渣-沥青混合料道路过早开裂的问题,采用二氧化硅胶体溶液对钢渣进行浸泡改性处理,通过力学性能测试、扫描电子显微镜(scanning electron microscope,SEM)检测、路用性能测试等方法研究了改性钢渣的物理力学性...针对钢渣体积稳定性差、钢渣-沥青混合料道路过早开裂的问题,采用二氧化硅胶体溶液对钢渣进行浸泡改性处理,通过力学性能测试、扫描电子显微镜(scanning electron microscope,SEM)检测、路用性能测试等方法研究了改性钢渣的物理力学性能、改性钢渣-沥青混合料的性能和钢渣的改性机理,并引入灰靶理论决策方法,综合改性钢渣-沥青混合料的各项性能指标,确定钢渣的最佳改性方案。结果表明:钢渣改性后,物理力学性能明显提高;钢渣的改性浓度越大,沥青混合料的高温性能越佳;延长钢渣的改性时间,沥青混合料的低温抗裂性能提高;且钢渣改性之后,沥青混合料的水稳定性能显著提高。基于灰靶决策理论,最终确定钢渣的最佳改性方案是在改性浓度(溶液质量分数)为3%的溶液下浸泡24 h。展开更多
文摘In order to study selection indices for improving rice grain yield, a cross was made between an Iranian traditional rice (Oryza sativa L.) variety, Tarommahalli and an improved indica rice variety, Khazar in 2006. The traits of the parents (30 plants), F1 (30 plants) and F2 generations (492 individuals) were evaluated at the Rice Research Institute of Iran (RRII) during 2007. Heritabilities of the number of panicles per plant, plant height, days to heading and panicle exsertion were greater than that of grain yield. The selection indices were developed using the results of multivariate analysis. To evaluate selection strategies to maximize grain yield, 14 selection indices were calculated based on two methods (optimum and base) and combinations of 12 traits with various economic weights. Results of selection indices showed that selection for grain weight, number of panicles per plant and panicle length by using their phenotypic and/or genotypic direct effects (path coefficient) as economic weights should serve as an effective selection criterion for using either the optimum or base index.
基金Project(70004782) supported by the Regional Strategic Technology Development Program of the Ministry of Knowledge Economy(MKE) of KoreaProject(2011-0017407) supported by the National Research Foundation of Korea (NRF) Funded by the Korea Government (MEST)
文摘The stability and reliability of a tilting index table should be considered at the design stage. A design method for the lightweight and improvement of the stability of the structure in a tilting index table was proposed using a commercial analysis program, ANSYS Workbench 12, by analyzing the static-thermal characteristics of the developed high-accuracy tilting index table at its design stage. The results of the performed structural analysis show that the maximum stress is generated at the stock tail part. An optimum design for the stock tail part was carried out to reduce the maximum stress and deformation. Also, the design variables were determined by considering the support of the stock tail part for the C-axis body. In the comparison of the results before and after the optimization, the maximum deformation and stress are improved by 2.8% and 8%, respectively.
基金Under the auspices of the Geological Survey Funds of Chinese Geological Survey(No.199916000111)
文摘Fluvial landforms in the Anhui section of the Changjiang(Yangtze)River are often considered as the main factors for frequent floods.It is these special landforms that influence the channel changes of the Changjiang River.Using Landsat TM image of 2000,this paper conducted a series of image processing,including principal component analysis,multi-spectral composition,gray value statistics,and spectral analysis of ground objects.Then it got a new interpretation map of different kinds of fluvial landforms of the Changjiang River in the Anhui section.Based on the interpretation mentioned above,the paper analyzes the distribution and characteristics of such typical landforms as terraces,floodplains and battures,and their functions on the changes of river channel.The results show a consistence with the earlier conclusion that the Anhui section of the Changjiang River tends to deflect gradually toward south,which provides more implications for further study on the geomorphologic evolution of the river channel.
文摘针对钢渣体积稳定性差、钢渣-沥青混合料道路过早开裂的问题,采用二氧化硅胶体溶液对钢渣进行浸泡改性处理,通过力学性能测试、扫描电子显微镜(scanning electron microscope,SEM)检测、路用性能测试等方法研究了改性钢渣的物理力学性能、改性钢渣-沥青混合料的性能和钢渣的改性机理,并引入灰靶理论决策方法,综合改性钢渣-沥青混合料的各项性能指标,确定钢渣的最佳改性方案。结果表明:钢渣改性后,物理力学性能明显提高;钢渣的改性浓度越大,沥青混合料的高温性能越佳;延长钢渣的改性时间,沥青混合料的低温抗裂性能提高;且钢渣改性之后,沥青混合料的水稳定性能显著提高。基于灰靶决策理论,最终确定钢渣的最佳改性方案是在改性浓度(溶液质量分数)为3%的溶液下浸泡24 h。
