Selection experiments for the optimum combination of AMF-plant-substrate for the restoration of coal mines

A complex substrate consisting of fly ash, coal gangue and excess sludge was used as an experimental soil in pot culture experiments. Different soil compositions were tested by observing the growth of arbuscular mycorrhizal （AM） fungi inoculated white clover, rye grass or com. The biomass of the host plants, the mycorrhizal colonization （MC） rate and the mycorrhizal depen- dency （MD） were measured. The research addresses the preferable AMF-plant-substrate combination appropriate for restoration of coal mines. We used two inoculation methods： single-inoculation with Glomus versiforme or Glomus mosseae and a dual inocula- tion with both Ctv and Gm. The results show that G^m is the preferable fungi and that dual inoculation does not show advantages for the restoration of coal mines. White clover inoculated with AM fungi is the most suitable condition for restoration of coal mines. The best weight ratio of fly ash, coal gangue and excess sludge was found to be 20：60：20. The optimum treatment conditions of AMF-plant-activated-substrate are described.

The applying of BP network in forecasting the demand and its growth rate for coal

Based on the statistical data from 1975 to 1997, we forecast the growth rate of coal consuming and the quantity in coming decade with the BP neuron network in the article.

Influence of depressurization rate on gas production capacity of high-rank coal in the south of Qinshui Basin, China

A desorption simulation experiment with the condition of simulated strata was designed. The experiment, under different depressurizing rates and the same fluid saturation, was conducted on the sample from 3# coal of Daning coal mine in Jincheng, Shanxi Province. The gas production rate and pressure change at both ends of the sample were studied systematically, and the mechanisms of some phenomena in the experiment were discussed. The experimental results show that, whether at fast or slow depressurizing rate, the methane adsorbed to high-rank coal can effectively desorb and the desorption efficiency can reach above 90%. There is an obvious inflection point on the gas yield curve during the desorption process and it appears after the pressure on the lump of coal reduces below the desorption pressure. The desorption of methane from high-rank coal is mainly driven by differential pressure, and high pressure difference is conducive to fast desorption. In the scenario of fast depressurization, the desorption inflection appears earlier and the gas production rate in the stage of rapid desorption is higher. It is experimentally concluded that the originally recognized strategy of long-term slow CBM production is doubtful and the economic benefit of CBM exploitation from high-rank coal can be effectively improved by rapid drainage and pressure reduction. The field experiment results in pilot blocks of Fanzhuang and Zhengzhuang show that by increasing the drainage depressurization rate, the peak production of gas well would increase greatly, the time of gas well to reach the economic production shortened, the average time for a gas well to reach expected production reduced by half, and the peak gas production is higher.

Study on the Fissure Rate in the Roof Strata of Excavated Coal Seams

In the past decades,the intense excavation of coal resources in China has induced a series of severe waterrelated disasters or problems,such as water burst accidents,severe groundwater depletion and contamination.All of these problems were caused by the structural changes of roof rocks or bed rocks induced by coal excavation.The structure of collapsed roof rocks is generally classified into three zones：falling zone.

Simulation of Paleotectonic Stress Fields and Distribution Prediction of Tectonic Fractures at the Hudi Coal Mine, Qinshui Basin

Study on tectonic fractures based on the inversion of tectonic stress fields is an effective method. In this study, a geological model was set up based on geological data from the Hudi Coal Mine, Qinshui Basin, a mechanical model was established under the condition of rock mechanics and geostress, and the finite element method was used to simulate the paleotectonic stress field. Based on the Griffith and Mohr-Coulomb criterion, the distribution of tectonic fractures in the Shanxi Formation during the Indosinian, Yanshanian, and Himalayan period can be predicted with the index of comprehensive rupture rate. The results show that the acting force of the Pacific Plate and the India Plate to the North China Plate formed the direction of principal stress is N-S, NW - SE, and NE - SW, respectively, in different periods in the study area. Changes in the direction and strength of the acting force led to the regional gradients of tectonic stress magnitude, which resulted in an asymmetrical distribution state of the stress conditions in different periods. It is suggested that the low-stress areas are mainly located in the fault zones and extend along the direction of the fault zones. Furthermore, the high-stress areas are located in the junction of fold belts and the binding site of multiple folds. The development of tectonic fractures was affected by the distribution of stress intensity and the tectonic position of folds and faults, which resulted in some developed areas with level I and II. There are obvious differences in the development of tectonic fractures in the fold and fault zones and the anticline and syncline structure at the same fold zones. The tectonic fractures of the Shanxi Formation during the Himalayan period are more developed than those during the Indosinian and Yanshanian period due to the superposition of the late tectonic movement to the early tectonic movement and the differences in the magnitude and direction of stress intensity.

Calculating changes in fractal dimension of surface cracks to quantify how the dynamic loading rate affects rock failure in deep mining

The split-Hopkinson pressure bar(SHPB)and digital image correlation(DIC)techniques are combined to analyze the dynamic compressive failure process of coal samples,and the box fractal dimension is used to quantitatively analyze the dynamic changes in the coal sample cracks under impact load conditions with different loading rates.The experimental results show that the fractal dimension can quantitatively describe the evolution process of coal fractures under dynamic load.During the dynamic compression process,the evolution of the coal sample cracks presents distinct stages.In the crack propagation stage,the fractal dimension increases rapidly with the progress of loading,and in the crack widening stage,the fractal dimension increases slowly with the progress of loading.The initiation of the crack propagation phase of the coal samples gradually occurs more quickly with increasing loading rate;the initial cracks appear earlier.At the same loading time point,when the loading rate is greater,the fractal dimension of the cracks observed in the coal sample is greater.

Research of Measuring Lump Coal Rate by Diameter Classification Method

The rate of lump coal is one of main factors that affects the price of raw coal. The coal mines always puzzle themselves about how to control rate of lump coal effectively. At present, the rate of lump coal is measured mainly by manual operation. The process is inaccurate and the efficiency is low. In this paper, a diameter classification method is proposed to measure the size of lump coal based on image processing.

Prediction of face advance rate and determination of the operation efficiency in retreat longwall mining panel using rock engineering system

A new approach for prediction of face advance rete (FAR) prior to mining operation and determination of the operation efficiency after mining operation in retreat longwall mining panel is presented based upon the concepts of rock engineering system (RES). For this purpose, six longwall panels considered in Parvadeh-I coal mine. Seven major effective parameters on FAR was selected including coal mine roof rating, gas propagation, safety factor of longwall face, ratio of joint spacing to cutting depth at longwall face, longwall face inclination, panel width, floor rock mass rating. To performance evaluation of the presented model, the relationship between the average vulnerability indexes of advance operation with FAR was determined in considered panels with coefficient of determination (R2) equal to 0.884 that indicate relatively acceptable correlation and compatibility. Investigations of the research indicated that it is possible to determine the actual operation efficiency under fair conditions by a RES-based model. The inevitable reduction of FAR for each longwall panel was determined by presented model that the difference amount between the maximum possible practical face advance rate (FARmpp) and recorded actual face advance rate (FARa) indicate the operation efficiency. Applied approach in this paper can be used to prediction of FAR in retreat longwall mining panel for same conditions that can have many benefits, including better and more accurate planning for the sales market and mine operation. Also, presented method in this paper can be applied as a useful tool to determination of actual operation efficiency for other sections and extraction methods in coal mines.

Experimental investigation and theoretical modeling on scale behaviors of high salinity wastewater in zero liquid discharge process of coal chemical industry

Zero liquid discharge(ZLD)treatment and reuse equipment of high salinity wastewater in coal-chemical industry often occur in various types of blockage problems because of high salt content,affecting the long-term stability of the device.In this study,the effects of solution temperature,steel,reaction time and wall roughness on fouling were investigated.The changes in the contents of fouling and fouling substances were qualitatively and quantitatively analyzed by XRD and EDS respectively,and the formation of scale was observed by SEM.The results show that with temperature increasing,Q235 steel is the most difficult to scale.Scaling rate of all salt scales reaches a maximum after 12 h,and the fouling rate decreases significantly from 12 to 48 h.It gradually stabilizes at 48 to 96 h.With the roughness increasing,the thickness of fouling layer increases,and a linear relationship is presented for 1 to 10 h.By comparing actual and simulated wastewater scaling rates,the relationship between actual and simulated wastewater scaling rates is y=ax-0.494.The composition of the scale was analyzed,calcium carbonate is the main product and increases with fouling time.Based on the above-mentioned results combining literatures,the hybrid prediction model with calcium carbonate as the main product is put forward.It is discussed microscopically that calcium carbonate is converted from aragonite and vaterite in a thermodynamically metastable state to calcite in a thermodynamically stable state.

Understanding roof deformation mechanics and parametric sensitivities of coal mine entries using the discrete element method

Although conventional coal mine designs are conservative regarding pillar strength,local failures such as roof-falls and pillar bursts still affect mine safety and operations.Previous studies have identified that discontinuous,layered roof materials have some self-supporting capacity.This research is a preliminary step towards understanding these mechanics in coal-measure rocks.Although others have considered broad conceptual models and simplified analogs for mine roof behavior,this study presents a unique numerical model that more completely represents in-situ roof conditions.The discrete element method(DEM)is utilized to conduct a parametric analysis considering a range of in-situ stress ratios,material properties,and joint networks to determine the parameters controlling the stability of single-entries modeled in two-dimensions.Model results are compared to empirical observations of roof-support effectiveness(ARBS)in the context of the coal mine roof rating(CMRR)system.Results such as immediate roof displacement,overall stability,and statistical relationships between model parameters and outcomes are presented herein.Potential practical applications of this line of research include:(1)roof-support optimization for a range of coal-measure rocks,(2)establishment of a relationship between roof stability and pillar stress,and(3)determination of which parameters are most critical to roof stability and therefore require concentrated evaluation.

Influence of backfilling rate on the stability of the"backfilling bodyimmediate roof"cooperative bearing structure

To reduce the cost of backfilling coal mining and utilize the underground space of coal mines,a new backfilling mining method with low backfilling rate called constructional backfilling coal mining(CBCM)is proposed.The "backfilling body-immediate roof" cooperative bearing structure of CBCM is analyzed by establishing the model of the medium thick plate on an elastic foundation.The influence of the backfilling rate on the stability of overlying strata is analyzed by the numerical simulation experiment.The control effect of CBCM is verified by a physic similar simulation test.The economic benefit of CBCM is analyzed.The conclusions are:the deformation characteristics of the immediate roof and critical backfilling spacing in CBCM can be analyzed based on the Hu Haichang’s theory.Exerting the bearing capacity of the immediate roof is beneficial to the stability of the overlying strata.The CBCM has a good control effect on the overburden in Xinyang Mine when the backfilling rate is lower than 25%.The backfilling cost of per ton coal is 37.39 yuan/t when the backfilling rate is 13.7%,with a decrease rate of 56.63%than the full-filling.The research results can provide theoretical support for the application of CBCM in coal mining.

Numerical analysis for the prediction of bump prone conditions:A southern Appalachian pillar coal bump case study

Two miners were fatally injured when a pillar bump occurred during retreat mining in a southern West Virginia coal mine.The mine was operating in the Eagle seam with overmining in the No.2 Gas and Powellton seams.A coal bump is defined as a sudden and violent failure of coal caused by the release of stored strain energy in the pillar.While significant strides have been made by academia,industry,and regulatory agencies to better understand bump conditions and mitigation techniques,coal bumps represent a long standing,highly site-specific engineering problem in which the exact failure mechanism is not clearly understood.In this case history,a cut-by-cut analysis of retreat mining operations was conducted on the 4 East Main leading up to the pillar bump event.Numerical input parameters were derived from site-specific geologic information and mine geometry for the analysis of pillar stress conditions and energy release using LaModel.An overview of stress conditions in the panel was presented including a precursor event that occurred two crosscuts inby the bump site.The methodology presented in the paper for the evaluation of the fatal bump event can be used for the identification of bump prone conditions prior to development and retreat of a mining area.

The three-factor model of evaluating mining rights of coal resources based on options

Since mining rights of coal resources(for short MRCR) could be regarded as a multi-stage compound real option,the evaluation for MRCR can be better solved using op- tion theory than the NPV.In the former research,we developed a two-factor model of evaluating MRCR when the coal spot price and convenience yield are stochastic based on option theory.On the basis of this two-factor model,we set up a three-factor model of evaluating MRCR when the interest rate followed a stochastic process.Through a real example application,we found the model can get higher values than the two-factor model and the NPV.This is because considering the volatility of interest rate can improve the executive opportunity of MRCR.

Water protection in the western semiarid coal mining regions of China: A case study

The coal industry in China has been moving from the semiarid eastern to the drier western regions since the beginning of this century.Water protection is of the utmost concern for coal mining in these regions.Lu'an,as one of the state coal mining bases in China,has been seeing increasingly heavier pressure for the protection of water resources.This article considers Lu'an as an example and describes the ways these concerns may be alleviated.High mine-water utilization rates have effectively reduced wasting of water and,consequently,have reduced water demand.Using the top layers of the Ordavician as aquifuge barriers can prevent floor karst water inrush into the longwall face and can protect the regional Ordovician karst water resources at the same time.The strength of the overlying Quaternary clay can protect against roof collapse and has successfully preserved the Quaternary porous water resource.

Application of the coal mine floor rating(CMFR)to assess the floor stability in a Central Appalachian Coal Mine

Estimating the overall floor stability in a coal mine using deterministic methods which require complex engineering properties of floor strata is desirable,but generally it is impractical due to the difficulty of gathering essential input data.However,applying a quantitative methodology to describe floor quality with a single number provides a practical estimate for preliminary assessment of floor stability.The coal mine floor rating(CMFR)system,developed by the University of New South Wales(UNSW),is a rockmass classification system that provides an indicator for the competence of floor strata.The most significant components of the CMFR are uniaxial compressive strength and discontinuity intensity of floor strata.In addition to the competence of the floor,depth of cover and stress notch angle are input parameters used to assess the preliminary floor stability.In this study,CMFR methodology was applied to a Central Appalachian Coal Mine that intermittently experienced floor heave.Exploratory drill core data,overburden maps,and mine plans were utilized for the study.Additionally,qualitative data(failure/non-failure)on floor conditions of the mine entries near the core holes was collected and analyzed so that the floor quality and its relation to entry stability could be estimated by statistical methods.It was found that the current CMFR classification system is not directly applicable in assessing the floor stability of the Central Appalachian Coal Mine.In order to extend the applicability of the CMFR classification system,the methodology was modified.A calculation procedure of one of the CMFR classification system’s components,the horizontal stress rating(HSR),was changed and new parameters were added to the HSR.

Determination of Catalytic Rate Constants towards Polymeric Conversion to Synthetic Oils: Bridging the Gap between Kinetics and Thermodynamics

Coal fly ash is being utilized as a recycling material for catalysis due to its aluminosilicate content. Catalytic conversion of polymeric wastes into synthetic gasoline and diesel through pyrolysis requires application of kinetic and thermodynamic principles. This study aimed to identify the catalytic rate constant necessary for rate law involved in reaction mechanisms and activation energy reduction needed for heat transfer rate. Stoichiometric application for balanced total series of elementary reactions is solved for the concentration determination of reactants and products. Unsteady-state in three dimensional directions of thermodynamics is derived for the determination of heat transfer rate, temperatures at any position in a sphere using Gurney and Lurie chart and center temperature in a sphere by Heisler chart. Application principles of rate law and Arrhenius equation can result to thermal conductivity as a function of activation energy leading to synthetic fuel production.

RESEARCH ON THE QUALITY PRICE RATIO OF COKING COAL

If assortment priee parity of Clase coking coal and its qtalty price danrcnee is nonreasonable, it deren't gulde in Anprotrig tbe quallry metaliurgical coking coal and may be influence theeconomic benefit of metallurgical enterprises. This paper propose the principles and mathematicmodel for determination aseortment party of clean cokingcoal and its quality difference of ash content in clean coking coal in order to urge wasbenes into producing superior clean coking cleal whichis under condition of consideration both interest waskeries and interest metallurgicai industry. It canbe used as a method in theory to make price strategies under condition of socialism maket economicfor washeries of clean coking coal

Space-time evolution rules of acoustic emission location of unloaded coal sample at different loading rates

By using MTS815 rock mechanics test system,a series of acoustic emission(AE) location experiments were performed under unloading confining pressure,increasing the axial stress.The AE space-time evolution regularities and energy releasing characteristics during deformation and failure process of coal of different loading rates are compared,the influence mechanism of loading rates on the microscopic crack evolution were studied,combining the AE characteristics and the macroscopic failure modes of the specimens,and the precursory characteristics of coal failure were also analyzed quantitatively.The results indicate that as the loading rate is higher,the AE activity and the main fracture will begin earlier.The destruction of coal body is mainly the function of shear strain at lower loading rate and tension strain at higher rate,and will transform from brittleness to ductility at critical velocities.When the deformation of the coal is mainly plasticity,the amplitude of the AE ringing counting rate increases largely and the AE energy curves appear an obvious ''step'',which can be defined as the first failure precursor point.Statics of AE information shows that the strongest AE activity begins when the axial stress level was 92-98%,which can be defined as the other failure precursor point.As the loading rate is smaller,the coal more easily reaches the latter precursor point after the first one,so attention should be aroused to prevent dynamic disaster in coal mining when the AE activity reaches the first precursor point.

Model test of the cutting properties of a shearer drum

According to similarity theory, we carried out a dimensional analysis of the shearer drum correlation parameters and built similarity criteria. Based on these, similarity models of shearer drums were developed. Simultaneously, based on an estab- lished cutting testbed of the coal and rock, cutting tests of different pick arrangements of the drum models were carried out, where the compressive strength of the analogous cutting material was 2.48 MPa and the drum rotary speed 67.5 r/min. The variance, the mean values, maxima and mean maxima of the torque load were analyzed for different type drum models. Moreover, the relation-ships between the type of pick arrangements and the cutting lump coal percentage were studied. The results indicate that the load fluctuation of the sequence drum is larger than that of the punnett square drum in the cutting process and the lump coal percentage and economic benefits of the sequence drum are inferior to the punnett square drum. We conclude that the punnett square drum is superior to the sequence drum.

Numerical simulation for determining three zones in the goaf at a fully-mechanized coal face

According to the theory of ventilation network, a model for a filtration flow field in goaf was built and simulation soft- ware for determining the three zones in goaf has been developed. This software uses no-gap-connection between Visual Basic (VB) and Excel to exchange data, uses Component Object Model (COM) component of MATLAB to plot charts of the three zones and to export the corresponding coordinates of the isolines. An example shows that this software is convenient and simple. By using it, the three zones can be easily determined. The software is convenient in studies and analyses of the three zones in goaf.