Fine mapping of the powdery mildew resistance gene PmXQ-0508 in bread wheat

In a wheat breeding line XQ-0508 showing consistent resistance to powdery mildew disease,a recessive gene,designated PmXQ-0508,was identified and mapped to a distal region on chromosome arm 2BS.Of three resistance-associated genes in this region,one encoding a protein kinase was selected as the primary candidate for PmXQ-0508.Ten closely linked DNA markers developed in the study could be used for marker-assisted selection for powdery-mildew resistance in breeding programs.

Improving model performance in mapping cropland soil organic matter using time-series remote sensing data

Faced with increasing global soil degradation,spatially explicit data on cropland soil organic matter(SOM)provides crucial data for soil carbon pool accounting,cropland quality assessment and the formulation of effective management policies.As a spatial information prediction technique,digital soil mapping(DSM)has been widely used to spatially map soil information at different scales.However,the accuracy of digital SOM maps for cropland is typically lower than for other land cover types due to the inherent difficulty in precisely quantifying human disturbance.To overcome this limitation,this study systematically assessed a framework of“information extractionfeature selection-model averaging”for improving model performance in mapping cropland SOM using 462 cropland soil samples collected in Guangzhou,China in 2021.The results showed that using the framework of dynamic information extraction,feature selection and model averaging could efficiently improve the accuracy of the final predictions(R^(2):0.48 to 0.53)without having obviously negative impacts on uncertainty.Quantifying the dynamic information of the environment was an efficient way to generate covariates that are linearly and nonlinearly related to SOM,which improved the R^(2)of random forest from 0.44 to 0.48 and the R^(2)of extreme gradient boosting from 0.37to 0.43.Forward recursive feature selection(FRFS)is recommended when there are relatively few environmental covariates(<200),whereas Boruta is recommended when there are many environmental covariates(>500).The Granger-Ramanathan model averaging approach could improve the prediction accuracy and average uncertainty.When the structures of initial prediction models are similar,increasing in the number of averaging models did not have significantly positive effects on the final predictions.Given the advantages of these selected strategies over information extraction,feature selection and model averaging have a great potential for high-accuracy soil mapping at any scales,so this approach can provide more reliable references for soil conservation policy-making.

Short-span interleaving based selected mapping

A novel interleaving based selected mapping （SLM） scheme to depress the relatively high peak power of transmit signals in multicarrier communications is proposed. In the scheme, a group of bit-level interleavers spanning only a few bits are used to produce multiple sequences representing the same information, and one of the sequences resulting in the lowest peak-to-average power ratio （PAPR） is selected for transmission. The implementation of the scheme including the structure of the short-span interleaver is illustrated. The performance of this PAPR reduction scheme is investigated by simulations. This scheme exhibits a good PAPR reduction performance, and for signals of high level modulation, such as 16QAM and 64QAM, it approaches the best performance of all SLM schemes. Compared to the conventional interleaving SLM, this short-span interleaving SLM results in a very short time delay, requires very few register units for buffering, and can be easily implemented by hardware.

Selective Mapping Scheme for Universal Filtered Multicarrier

The next step in mobile communication technology,known as 5G,is set to go live in a number of countries in the near future.New wireless applica-tions have high data rates and mobility requirements,which have posed a chal-lenge to mobile communication technology researchers and designers.5G systems could benefit from the Universal Filtered Multicarrier(UFMC).UFMC is an alternate waveform to orthogonal frequency-division multiplexing(OFDM),infiltering process is performed for a sub-band of subcarriers rather than the entire band of subcarriers Inter Carrier Interference(ICI)between neighbouring users is reduced via the sub-bandfiltering process,which reduces out-of-band emissions.However,the UFMC system has a high Peak-to-Average Power Ratio(PAPR),which limits its capabilities.Metaheuristic optimization based Selective mapping(SLM)is used in this paper to optimise the UFMC-PAPR.Based on the cognitive behaviour of crows,the research study suggests an innovative metaheuristic opti-mization known as Crow Search Algorithm(CSA)for SLM optimization.Com-pared to the standard UFMC,SLM-UFMC system,and SLM-UFMC with conventional metaheuristic optimization techniques,the suggested technique sig-nificantly reduces PAPR.For the UFMC system,the suggested approach has a very low Bit Error Rate(BER).

基于医学CT与SLM技术的踝关节骨骼逆向建模与制备

基于医学CT与3D打印技术实现了骨骼重建与制造。通过对病人踝关节骨骼原始CT数据的采集,运用医学逆向工程软件Mimics及Geomagic软件对骨骼分别进行三维模型重建和骨骼曲面修复、优化,得到了骨面较为光滑平整的踝关节模型。通过对骨骼模型进行静力学分析,说明在人体结构生物力学条件下,所建立的踝关节三维模型满足力学要求。通过实验获得了TC4钛合金激光选区熔化(SLM)技术的优化工艺参数为激光功率240 W,扫描速度800 mm/s,扫描间距为0.12 mm,铺粉厚度为0.05 mm。采用该工艺参数和所建立的踝关节模型,实现了TC4钛合金踝关节3D打印逆向制造,所得制品的形状与组织成分优,满足医学使用要求。

An integrated method of selecting environmental covariates for predictive soil depth mapping

Environmental covariates are the basis of predictive soil mapping.Their selection determines the performance of soil mapping to a great extent,especially in cases where the number of soil samples is limited but soil spatial heterogeneity is high.In this study,we proposed an integrated method to select environmental covariates for predictive soil depth mapping.First,candidate variables that may influence the development of soil depth were selected based on pedogenetic knowledge.Second,three conventional methods(Pearson correlation analysis(PsCA),generalized additive models(GAMs),and Random Forest(RF))were used to generate optimal combinations of environmental covariates.Finally,three optimal combinations were integrated to produce a final combination based on the importance and occurrence frequency of each environmental covariate.We tested this method for soil depth mapping in the upper reaches of the Heihe River Basin in Northwest China.A total of 129 soil sampling sites were collected using a representative sampling strategy,and RF and support vector machine(SVM)models were used to map soil depth.The results showed that compared to the set of environmental covariates selected by the three conventional selection methods,the set of environmental covariates selected by the proposed method achieved higher mapping accuracy.The combination from the proposed method obtained a root mean square error(RMSE)of 11.88 cm,which was 2.25–7.64 cm lower than the other methods,and an R^2 value of 0.76,which was 0.08–0.26 higher than the other methods.The results suggest that our method can be used as an alternative to the conventional methods for soil depth mapping and may also be effective for mapping other soil properties.

Fine mapping and marker-assisted selection (MAS) of a low glutelin content gene in rice

Rice with low glutelin content is suitable as functional food for patients affected with diabetes and kidney failure. The fine mapping of the gene(s) responsible for low glutelin content will provide information regarding the distribution of glutelin related genes in rice genome and will generate markers for the selection of low glutelin rice varieties. Following an SDS-PAGE screen of rice germplasm from Taihu Valley of China, Japonica selection W3660 is identified to be a novel mutant characterized with low glutelin content. For fine mapping the mutant gene for low glutelin content, F2 and F3 populations were derived from a cross between W3660 and Jingrennuo. SDS-PAGE analysis of the total endosperm protein showed that the low glutelin content trait was controlled by a single dominant nuclear gene. Genetic mapping, using SSRs, located this gene to chromosome 2, in the region between SSR2-001/SSR2-004 and RM1358. The dis- tances of the two markers to the target gene were 1.1 cM and 3.8 cM respectively. By semi-quantitative RT-PCR analysis, the transcripts of GluB4/GluB5 genes located within the region do not change. However, GluB5 gene located proximal to SSR2-001/SSR2-004 was specifically reduced. SSR profiles of seven Japonica varieties were compared with that of W3660 for loci in the relevant genetic region. The markers SSR2-004 and RM1358 were used for marker- assisted selection. The selection efficiencies of SSR2-004 and RM1358 were 96.8% and 92.7% respectively. This provides a standard starting point for the breeding of low glutelin content rice varieties in China.

铝合金叶轮SLM成型摆放及支撑方案仿真与实验

为减少选区激光熔化成型试错次数并高效打印某铝合金潜水泵叶轮,使用ANSYS软件模拟不同摆放和支撑设计方案下叶轮SLM成型过程中的应力、变形和刮刀碰撞。通过对比确定叶轮正置为最优的设计方案,并进行了SLM成型。试制叶轮外表无裂纹和明显变形,内部无大孔隙。对叶轮进行激光扫描偏差分析,发现平均偏差为0.106mm。退火后,试棒抗拉强度可达257~264 MPa,断后伸长率为11%~12%。可见,叶轮SLM成型过程仿真可为同类结构铝合金零件SLM成型摆放与支撑设计提供有益参考。

Interplay of laser power and pore characteristics in selective laser melting of ZK60 magnesium alloys:A study based on in-situ monitoring and image analysis

This study offers significant insights into the multi-physics phenomena of the SLM process and the subsequent porosity characteristics of ZK60 Magnesium(Mg)alloys.High-speed in-situ monitoring was employed to visualise process signals in real-time,elucidating the dynamics of melt pools and vapour plumes under varying laser power conditions specifically between 40 W and 60 W.Detailed morphological analysis was performed using Scanning-Electron Microscopy(SEM),demonstrating a critical correlation between laser power and pore formation.Lower laser power led to increased pore coverage,whereas a denser structure was observed at higher laser power.This laser power influence on porosity was further confirmed via Optical Microscopy(OM)conducted on both top and cross-sectional surfaces of the samples.An increase in laser power resulted in a decrease in pore coverage and pore size,potentially leading to a denser printed part of Mg alloy.X-ray Computed Tomography(XCT)augmented these findings by providing a 3D volumetric representation of the sample internal structure,revealing an inverse relationship between laser power and overall pore volume.Lower laser power appeared to favour the formation of interconnected pores,while a reduction in interconnected pores and an increase in isolated pores were observed at higher power.The interplay between melt pool size,vapour plume effects,and laser power was found to significantly influence the resulting porosity,indicating a need for effective management of these factors to optimise the SLM process of Mg alloys.

粉末粒径分布对SLM-GH3536合金熔池形态的影响

激光粉末床增材制造过程通常采用离散元法和计算流体力学相结合的方式对熔融过程进行仿真分析。离散元生成粉末床的质量一定程度上依赖于试验测量的粒度分布数据,通常采用离散的试验测量结果来建立粉末床,不利于对粉末分布形式进行推广。本文针对GH3536合金粉末的激光选区熔化(selective laser melting,SLM)成形过程进行热流耦合仿真,建立了单层单道扫描的三维热流耦合模型。以均匀分布的粉末床为基准,对比了试验测量的离散分布以及近似的对数正态分布粉末床对应的熔池形态差异以及成形效果。结果表明虽然近似的对数正态分布粉末床整体的熔池形貌不如试验分布,但是从外观上看过渡更加均匀,而且仅需要均值和方差信息就可以确定粉末分布形式,这说明近似的概率分布形式虽然与实际情况存在一定差异,但是便于建模和参数分析。此外,本文通过调整激光功率和扫描速度的组合,分析了不同参数组合下熔池轨迹的变化规律。结果表明在能量输入接近的条件下,较低的激光功率和扫描速度具有更好的成形效果。本研究对激光选区熔化成形GH3536合金的仿真建模以及制粉过程有一定的指导作用。

An Improved Selective Mapping Method for PAPR Reduction in OFDM/OQAM System

Orthogonal frequency division multiplex/offset QAM (OFDM/OQAM) has been proven to be a promising multi-carrier modulation (MCM) technique for the transmission of signals over multipath fading channels. However, OFDM/OQAM has also the intrinsic disadvantage of high peak-to-average-power ratio (PAPR) that should be alleviated. In this paper, a novel selective mapping (SLM) method is proposed for OFDM/OQAM system. Since the pulse shape may cover a few OFDM symbols, the basic principle of the proposed method is to apply the SLM method in the range of the most relevant OFDM symbols. Analysis and simulation results show that, compared to the existing SLM algorithms for OFDM/OQAM system, the proposed method has better PAPR performance and lower computation complexity.

Combining rough set theory and instance selection in ontology mapping

This paper presents a novel ontology mapping approach based on rough set theory and instance selection.In this appoach the construction approach of a rough set-based inference instance base in which the instance selection(involving similarity distance,clustering set and redundancy degree)and discernibility matrix-based feature reduction are introduced respectively;and an ontology mapping approach based on multi-dimensional attribute value joint distribution is proposed.The core of this mapping aI overlapping of the inference instance space.Only valuable instances and important attributes can be selected into the ontology mapping based on the multi-dimensional attribute value joint distribution,so the sequently mapping efficiency is improved.The time complexity of the discernibility matrix-based method and the accuracy of the mapping approach are evaluated by an application example and a series of analyses and comparisons.

Selective sampling with Gromov–Hausdorff metric:Efficient dense-shape correspondence via Confidence-based sample consensus

Background Functional mapping, despite its proven efficiency, suffers from a “chicken or egg” scenario, in that, poor spatial features lead to inadequate spectral alignment and vice versa during training, often resulting in slow convergence, high computational costs, and learning failures, particularly when small datasets are used. Methods A novel method is presented for dense-shape correspondence, whereby the spatial information transformed by neural networks is combined with the projections onto spectral maps to overcome the “chicken or egg” challenge by selectively sampling only points with high confidence in their alignment. These points then contribute to the alignment and spectral loss terms, boosting training, and accelerating convergence by a factor of five. To ensure full unsupervised learning, the Gromov–Hausdorff distance metric was used to select the points with the maximal alignment score displaying most confidence. Results The effectiveness of the proposed approach was demonstrated on several benchmark datasets, whereby results were reported as superior to those of spectral and spatial-based methods. Conclusions The proposed method provides a promising new approach to dense-shape correspondence, addressing the key challenges in the field and offering significant advantages over the current methods, including faster convergence, improved accuracy, and reduced computational costs.

CONTINUOUS SELECTION THEOREMS FOR FAN-BROWDER MAPPINGS IN TOPOLOGICAL SPACES AND THEIR APPLICATIONS

The concept of Fan-Browder mappings was first introduced in topological spaces without any convex structure. Then a new continuous selection theorem was obtained for the Fan-Browder mapping with range in a topological space without any convex structure and noncompact domain. As applications, some fixed point theorems, coincidence theorems and a nonempty intersection theorem were given. Both the new concepts and results unify and extend many known results in recent literature.

工艺参数对SLM成型GH4169合金微观组织和残余应力的影响

在增材制造中,成型工艺参数是影响高温合金微观组织和性能的重要因素。针对GH4169合金,设计了基于激光功率、扫描速度、扫描间距等变量的15组工艺参数,采用选区激光熔化技术(SLM)制备了相应的合金试样,研究了不同工艺参数对试样致密度、微观形貌和残余应力的影响。利用JMP软件建立了工艺参数对试样致密度影响的数学模型,并确定了主要的影响因素。结果表明,扫描速度对致密度的影响最大,其次是激光功率和扫描间距。成型试样的致密度均在99.40%以上,最大可达到99.98%。当激光功率为222 W或扫描速度为1 190 mm/s时,更容易产生未熔合缺陷。当激光功率为403 W或扫描速度为573 mm/s时,由于局部温度过高和反冲压力的升高,容易产生气孔、匙孔等缺陷。试样表面的残余拉应力随着激光功率的增加和扫描速度的降低而增大,残余拉应力的最大值为853 MPa。

Selective Laser Melting of Novel SiC and TiC Strengthen 7075 Aluminum Powders for Anti-Cracks Application

The aerospace and military sectors have widely used AA7075, a type of 7075 aluminum alloy, due to its exceptional mechanical performance. Selective laser melting (SLM) is a highly effective method for producing intricate metallic components, particularly in the case of aluminum alloys like Al-Si-Mg. Nevertheless, the production of high-strength AA7075 by SLM is challenging because of its susceptibility to heat cracking and elemental vaporization. In this study, AA7075 powders were mechanically mixed with SiC and TiC particles. Subsequently, this new type of AA7075 powder was effectively utilized in green laser printing to create solid components with fine-grain strengthening microstructures consisting of equiaxial grains. These as-printed parts exhibit a tensile strength of up to 350 MPa and a ductility exceeding 2.1%. Hardness also increases with the increasing content of mixed powder, highlighting the essential role of SiC and TiC in SLM for improved hardness and tensile strength performance. .

Peak-to-average power ratio reduction using selective mapping with unequal power distribution

A new approach for peak-to-average power ratio (PAPR) reduction in orthogonal frequency division multiplexing (OFDM) systems was proposed.This approach is based on assigning powers to the different subcarriers of OFDM using an unequal power distribution strategy.In addition,a reduced complexity selective mapping (RC-SLM) scheme was proposed.The proposed scheme is based on partitioning the frequency domain symbol sequence into several sub-blocks,and then each sub-block is multiplied by different phase sequences whose length is shorter than that used in the conventional SLM scheme.Then,a kind of low complexity conversions is used to replace the IFFT blocks.The performance of the proposed RC-SLM scheme along with the new approach was studied with computer simulation.The obtained results show that the proposed RC-SLM scheme is able to achieve the lowest computational complexity when compared with other low complexity schemes proposed in the literature while at the same time improves the PAPR reduction performance by about 0.3 dB.

Genome Mapping to Enhance Efficient Marker-Assisted Selection and Breeding of the Oil Palm (<i>Elaeis guineensis</i>Jacq.)

The oil palm (Elaeis guineensis Jacq.) is one of the major cultivated crops among the economically important palm species. It is cultivated mainly for its edible oil. For a perennial crop like oil palm, the use of Marker Assisted Selection (MAS) techniques helps to reduce the breeding cycle and improve the economic products. Genetic and physical maps are important for sequencing experiments since they show the exact positions of genes and other distinctive features in the chromosomal DNA. This review focuses on the role of genome mapping in oil palm breeding. It assesses the role of genome mapping in oil palm breeding and discusses the major factors affecting such mapping. Generating a high-density map governed by several factors, for instance, marker type, marker density, number of mapped population, and software used are the major issues treated. The general conclusion is that genome mapping is pivotal in the construction of a genetic linkage map. It helps to detect QTL and identify genes that control quantitative traits in oil palm. In perspective, the use of high-density molecular markers with a large number of markers, a large number mapping population, and up-to-date software is necessary for oil palm genome mapping.

SLM成形件切削比能模型建立及影响因素分析

选区激光熔融(SLM)成形件在通过后处理加工提升表面质量时会消耗大量能量,而通过优化切削比能可以提高材料去除率和降低切削力,进而减小加工过程中的能量消耗。因此以SLM Inconel 718成形件为研究对象,建立基于切削力的切削比能模型。结合微铣削正交实验,拟合得到SLM Inconel 718微铣削切削比能与铣削参数的经验公式,并研究不同铣削参数对切削比能的影响规律。结果表明,SLM Inconel 718切削比能经验公式拟合程度在95%以上,切削深度对切削比能影响很小,切削比能随主轴转速和每齿进给量的增加而增加。

Molecular and Physical Mapping of Powdery Mildew Resistance Genes and QTLs in Wheat: A Review

Wheat powdery mildew （Pro） is a major disease of wheat worldwide. During the past years, numerous studies have been published on molecular mapping of Pm resistance gene（s） in wheat. We summarized the relevant findings of 89 major re- sistance gene mapping studies and 25 quantitative trait loci （QTL） mapping studies. Major Pm resistance genes and QTLs were found on all wheat chromosomes, but the Pm resistance genes/QTLs were not randomly distributed on each chromosome of wheat. The summarized data showed that the A or B genome has more major Pm resistance genes than the D genome and chromosomes 1A, 2A, 2B, 5B, 5D, 6B, 7A and 7B harbor more major Pm resistance genes than the other chromosomes. For adult plant resistance （APR） genes/QTLs, B genome of wheat harbors more APR genes than A and D genomes, and chromo- somes 2A, 4A, 5A, 1B, 2B, 3B, 5B, 6B, 7B, 2D, 5D and 7D harbor more Pm resistance QTLs than the other chromosomes, suggesting that A genome except 1A, 3A and 6A, B genome except 4B, D genome except 1D, 3D, 4D, and 6D play an impor- tant role in wheat combating against powdery mildew. Furthermore, Pm resistance genes are derived from wheat and its rela- tives, which suggested that the resistance sources are diverse and Pm resistance genes are diverse and useful in combating against the powdery mildew isolates. In this review, four APR genes, Pm38/Lr34/Yr18/Sr57, Pm46/Lr67/Yr46/Sr55, Pm？/Lr27/Yr30/ SY2 and Pm39/Lr46/Yr29, are not only resistant to powdery mildew but also effective for rust diseases in the field, indicating that such genes are stable and useful in wheat breeding programmes. The summarized data also provide chromosome locations or linked markers for Pm resistance genes/QTLs. Markers linked to these genes can also be utilized to pyramid diverse Pm resis- tance genes/QTLs more efficiently by marker-assisted selection.