Experimental Study on Vortex-Induced Vibration of Rough Risers with Coupling Interference Effect Under Side-by-Side Arrangement

A vortex-induced vibration(VIV)experiment of rough risers with coupling interference effect under a side-by-side arrangement was carried out in a wave-current combined flume.The roughness of the riser was characterized by arranging different specifications of surface attachments on the surface of the riser.Rough risers with three different roughnesses were arranged side by side with smooth risers to explore the VIV response of the riser under the combined action of roughness and interference effect,and to reveal the coupling mechanism between roughness and interference effect.The experimental results show that,compared with that of a smooth riser,the VIV of a rough riser under the coupling interference effect has a wider"lock-in"region,and the displacement decreases more significantly at a high reduced velocity,which is more likely to excite higher-order modes and frequency responses.In addition,the displacement response and frequency response of the smooth riser are not significantly affected by wake interference from the rough riser,which is caused by the decrease of the wake region due to the delay of the boundary layer separation point of the rough riser.

Intraseasonal variability of the Kuroshio observed via mooring at 18°N

Insufficient observations near the origin of the Kuroshio have led to incomplete understanding of the intraseasonal variability(ISV)of the Kuroshio.Direct measurements of the Kuroshio velocity were performed with an array of three profiler moorings(122.7°E,123°E,and 123.3°E)along 18°N from January 2018 to February 2020.The ISV of the Kuroshio at 18°N was investigated based on a combination of mooring observations and global high-resolution HYbrid Coordinate Ocean Model reanalysis data.The estimated time-averaged transport in the upper 350 m across the observation transect was 6.5±2.6 Sv(1.0 Sv=10^(6)m^(3)/s).Two significant ISV peaks at 50-60 and~100 d were recognized in the power spectra of the meridional velocity and transport.Further analysis indicated that the ISV at 50-60 d was caused by westward-propagating eddies at average propagation speed of~13 cm/s and wavelength of~635 km.Another ISV peak at~100 d was mainly caused by northward-propagating eddies generated in the North Equatorial Current region.Further investigation indicated that the ISV of the Kuroshio at 18°N is dominated by meridional transport,rather than by the zonal migration of the Kuroshio main axis.Our findings provide a better understanding of the ISV of the Kuroshio east of Luzon Island.

Current observation and analysis based on mooring systems in the Andaman Sea

The basic structure and intraseasonal evolution of currents in the southeastern Andaman Sea was analyzed based on data collected in 2017 from two subsurface moorings(C1 and C5).Periodic variation in the upper ocean currents of the Andaman Sea was investigated by combining observational and satellite data.Mooring observations show that rapid changes of current speed and direction occurred in May and June,with a significant increase in current velocity at the C1 mooring.In the second half of the year,southward flow dominated at the C1 mooring,and alternating northward and southward flows were evident at the C5 mooring during the same period but the northward flow prevailed in boreal winter.In addition,analysis of the power spectra of the upper currents revealed that the tidal period at both moorings is primarily semidiurnal with weaker energy than that of the low-frequency currents.The upper ocean currents at the C1 and C5 moorings exhibited intraseasonal variation of 30-60 d and 120 d,while the zonal current at the C1 mooring exhibited a notable period of approximately 180 d.Further analysis indicated that the variability of currents in the Andaman Sea is influenced primarily by equatorial Kelvin waves and Rossby wave packets.Moreover,our results suggest that equatorial Kelvin waves from the eastern Indian Ocean entered the Andaman Sea in the form of Wyrtki Jets and propagated primarily along two distinct pathways during the observation period.In addition to coastal boundary Kelvin waves,it was found that a branch of the Wyrtki Jet that directly enters the Andaman Sea and flows northward along the slope of the continental shelf,and reflected Rossby wave packets by topography.

Safety Assessment for a Side-by-side Offloading Mooring System

In order to improve the safety properties of an offloading system with side-by-side （SBS） mooring in which the FPSO is moored by a yoke system in the field of BZ25-1, it is necessary to analyze those properties. According to the experience of similar projects, tow strategies of different offioading arrangements were discussed by using the 3-D radiation/diffraction theory and quasi-static time domain method to assess their respective safety properties. Through the safety assessment analysis of different arrangement comparisons, various ways to improve the safety properties of off＇loading systems with side-by-side mooring were verified by analyzing the tension in the mooring lines and the fender deflection. Through comparison it can be concluded that by enlarging the key factors properly, including the size of the fenders and the hawsers as well as the number of hawsers, a better safety performance can be achieved.

A Numerical Study on Optimization of Side-by-Side Mooring System of Floating LNG Bunkering Terminal with LNG Carrier in Operation Condition

In this study, we perform a series of numerical calculations on two vessels in the time domain. One vessel maintains its position using an internal turret and catenary mooring lines, while the other is moored to the former vessel via an STS （ship-to-ship） mooring system. We obtain hydrodynamic forces using the HOBEM （higher-order boundary element method）. Then, we determine their coefficients using the convolution function method in the time domain. We model the catenary mooring lines using the finite element method, and the STS mooring lines are treated as linear SPs （springs） with constraints. To optimize the STS system, we conduct parametric studies on STS mooring systems. Finally, we compare the motion and structural responses of the initial and modified configurations.

Study on the Characteristics of A New Hybrid Mooring System for DualPlatform Joint Operations

As the sustainable exploitation of marine resources develops,dual-platform joint operation has caught increasing attention.Dual-platform joint operation requires smaller relative motion between the two sub-platforms,which is normally difficult to be satisfied by the traditional mooring system.Therefore,a new hybrid mooring system is developed and studied in this article.To ensure safety during platform movements,both the number of anchor chains and the relative motion between the two sub-platforms are reduced in the new hybrid mooring system.By performing numerical simulations based on three-dimensional potential flow theory in AQWA and physical experiments,the performances of both the new hybrid and traditional mooring systems under two different wave conditions(i.e.,working wave and freak wave conditions) are systematically investigated.Regarding the new hybrid mooring system,the relative stability between the two sub-platforms of the new system is better,and the platforms can restore stability faster when affected by freak waves.

Time-Domain Simulation for Coupled Motions of Three Barges Moored Side-by-Side in Floatover Operation

Simulating the coupled motions of multiple bodies in the time domain is a complex problem because of the strong hydrodynamic interactions and coupled effect of various mechanical connectors. In this study, we investigate the hydrodynamic responses of three barges moored side-by-side in a floatover operation in the frequency and time domains. In the frequency domain, the damping lid method is adopted to improve the overestimated hydrodynamic coefficients calculated from conventional potential flow theory. A time-domain computing program based on potential flow theory and impulse theory is compiled for analyses that consider multibody hydrodynamic interactions and mechanical effects from lines and fenders. Correspondingly, an experiment is carried out for comparison with the numerical results. All statistics, time series, and power density spectra from decay and irregular wave tests are in a fairly good agreement.

Orthogonal Frequency Division Multiplexing Adaptive Technology for Multinode Users of Seawater Channel Based on Inductively Coupled Mooring Chain

As an important part of buoy-type ocean monitoring systems,the inductively coupled mooring chain solves the problem of data cotransmission through the multinode sensors that it carries,which is significant for the rapid acquisition of fish,hydrology,and other information.This paper is based on a seawater channel transmission model with a depth of 300 m and a bandwidth of 2 MHz.An orthogonal frequency division multiplexing(OFDM)technology is used to overcome the multipath effect of signal transmission on a seawater medium.The adaptive technology is integrated into the OFDM,and an improved joint subcarrier and bit power allocation algorithm is proposed.This algorithm solves the problem of dynamic subcarrier allocation during the cotransmission of underwater multinode user data in seawater channels.The results show that the algorithm complexity can be reduced by 0.18126×10^(-2)s during one complete OFDM system data transmission by the improved greedy algorithm,and a total of 216 bits are transmitted by the OFDM.The normalized channel capacity can be improved by 0.012 bit s^(-1)Hz^(-1).At the bit error ratio(BER)of 10^(-3),the BER performance can be improved by approximately 6 d B.When the numbers of users are 4 and 8,the improved algorithm increases the channel capacity,and the higher the number of users,the more evident the channel capacity improvement effect is.The results of this paper have an important reference value for enhancing the transmission performance of inductively coupled mooring chain underwater multinode data.

Motion simulation of moorings using optimized LSTM neural network

Mooring arrays have been widely deployed in sustained ocean observation in high resolution to measure finer dynamic features of marine phenomena.However,the irregular posture changes and nonlinear response of moorings under the effect of ocean currents face huge challenges for the deployment of mooring arrays,which may cause the deviations of measurements and yield a vacuum of observation in the upper ocean.We developed a data-driven mooring simulation model based on LSTM(long short-term memory)neural network,coupling the ocean current with position data from moorings to predict the motion of moorings,including single-step output prediction and multi-step prediction.Based on the predictive information,the formation of the mooring array can be adjusted to improve the accuracy and integrity of measurements.Moreover,we proposed the cuckoo search(CS)optimization algorithm to tune the parameters of LSTM,which improves the robustness and generalization of the model.We utilize the datasets observed from moorings anchored in the Kuroshio Extension region to train and validate the simulation model.The experimental results demonstrate that the model can remarkably improve prediction accuracy and yield stable performance.Moreover,compared with other optimization algorithms,CS is more efficient and performs better in simulating the motion of moorings.

一类树的邻接矩阵的Moore-Penrose广义逆

根据矩阵结构性质,利用分块矩阵技巧给出任意点数、任意长直径的毛毛虫树邻接矩阵的Moore-Penrose广义逆的具体形式,为进一步研究毛毛虫树的代数性质提供理论支撑.

Spatial Decay Estimates for the Moore-Gibson-Thompson Heat Equation

In this article,the Moore-Gibson-Thompson heat equation in three-dimensional cylindrical domain are studied.Using a second order differential inequality,we obtain that the solution can decay exponentially as the distance from the entry section tends to infinity.Our result can be seen as a version of Saint-Venant principle.

Internal tides in the northern South China Sea from 20-day in-situ mooring observations in 1998

20-day in-situ ADCP current and CTD data are used to investigate the characteristics and energy of the internal tides in the northern South China Sea （NSCS）. The results show that the O1, K1, M2 and S2 constituents of internal tides are energetic and diurnal constituents （O1 and K1） are dominating. In the observational period, the current vectors of these four constituents all rotate clockwise and the maximum semi-major axe of internal tidal ellipses is more than 14 cm/s. The variation of ocean temperature shows that the internal tides present obvious quasi-diurnal oscillation and the average amplitude reaches 50 m. Furthermore, these internal tides carry high energy and appear to be intermittent. The maximum values of KE （PE） during the observational period are up to 2 （3.5） k J/m^2 for diurnal internal tides, and up to 1 （1.5） k J/m^2 for semidiurnal internal tides.

Fully Coupled Effects of Hull,Mooring and Risers Model in Time Domain Based on An Innovative Deep Draft Multi-Spar

The coupled hull, mooring and riser analysis techniques in time domain are widely recognized as the unique approach to predict the accurate global motions. However, these complex issues have not been perfectly solved due to a large number of nonlinear factors, e.g. forces nonlinearity, mooring nonlinearity, motion nonlinearity and so on. This paper investigates the coupled effects through the numerical uncoupled model, mooring coupled model and fully coupled model accounting mooring and risers based on a novel deep draft multi-spar which is especially designed for deepwater in 2009. The numerical static-offset, free-decay, wind-action tests are executed, and finally three hours simulations are conducted under 100-year return period of GOM conditions involving wave, wind and current actions. The damping contributions, response characteristics and mooring line tensions are emphatically studied.

Static and Dynamic Analysis of Mooring Lines by Nonlinear Finite Element Method

This study has focused on developing numerical procedures for the static and dynamic nonlinear analysis of mooring lines. A geometrically nonlinear finite element method using isoparametric cable element with two nodes is briefly presented on the basis of the total Lagrangian formulation. The static and dynamic equilibrium equations of mooring lines are established. An incremental-iterative method is used to determine the initial static equilibrium state of cable systems under the action of self weights, buoyancy and current. Also the Newmark method is used for dynamic nonlinear analysis of ocean cables. Numerical examples are presented to validate the present numerical method, and examine the effect of various parameters.

Study on A New Mooring System Integrating Catenary with Taut Mooring

Analyzed are the merits and demerits of catenary mooring system and taut mooring system, which are commonly used nowadays. As falling somewhere between these two systems, a new mooring system integrating catenary with taut mooring is proposed. In order to expound and prove the advantages of this new system, the motion performance of a semi-submersible platform is simulated by employing full time domain coupled analysis method. A comparison of the result of new mooting system with that of taut mooring system shows that the movement of the platform using the new type mooting system is smaller than that using the taut mooring system, which ensures a better working condition. Furthermore, the new mooring system is also compatible with the characteristics of catenary mooting system, which eliminates the requirement of anti-uplift capacity of the anchors.

Fatigue Analysis of the Taut-Wire Mooring System Applied for Deep Waters

Precisely predicting the fatigue life of taut-wire mooring systems has become an interesting and important problem for scientists and engineers since there are still difficulties in the inspection and maintenance of mooring lines in a rough sea environment especially in deep waters. In this paper, a comprehensive fatigue analysis is performed for a polyester taut-wire mooring system of an FPSO based on the time domain dynamic theory, rainflow cycle counting method and linear damage accumulation rule of Palmgren-Miner. Three influential factors in the fatigue analysis including the pre-tension, dynamic stiffness and T-N curve are investigated in detail. Two polyester T-N curves, one is from the DNV- 0S-E301 and the other is from the API-RP-2SM, are adopted in the calculation. The fatigue analysis of the mooting system after one-line failure is also carried out. The calculation results indicate that the fatigue life is significantly affected by the T-N curve. The fatigue life decreases with increasing pre-tension, and is largely reduced if taking into account the dynamic stiffness caused by cyclic loading. The analysis also proves that one-line failure has remarkable effects on the fatigue lives of other mooting lines. The present parametric and comparative study is believed to be meaningful to further understanding of the taut-wire mooting system for deepwater applications.

Performance of Two Types of Mooring Systems in the Heave Motion of a Two-body Floating Wave Energy Converter

This work investigated the influence of two types of mooring systems on the hydrodynamic performance of a two-body floating wave energy converter(WEC). It also investigated the effects of the physical parameters of the mooring system on the amount of extractable power from incident waves in the frequency domain. The modeled converter comprised a floating body(a buoy), a submerged body with two mooring systems, and a coupling system for two bodies. The coupling system was a simplified power take-off system that was modeled by a linear spring-damper model. The tension leg mooring system could drastically affect the heave motion of the submerged body of the model and increase relative displacement between the two bodies. The effects of the stiffness parameter of the mooring system on power absorption exceeded those of the pretension tendon force.

Sensitivity Analysis of Air Gap Motion with Respect to Wind Load and Mooring System for Semi-Submersible Platform Design

A design of semi-submersible platform is mainly based on the extreme response analysis due to the forces experienced by the components during lifetime. The external loads can induce the extreme air gap response and potential deck impact to the semi-submersible platform. It is important to predict air gap response of platforms accurately in order to check the strength of local structures which withstand the wave slamming due to negative air gap. The wind load cannot be simulated easily by model test in towing tank whereas it can be simulated accurately in wind tunnel test. Furthermore, full scale simulation of the mooring system in model test is still a tuffwork especially the stiffness of the mooring system. Owing to the above mentioned problem, the model test results are not accurate enough for air gap evaluation. The aim of this paper is to present sensitivity analysis results of air gap motion with respect to the mooring system and wind load for the design of semi-submersible platform. Though the model test results are not suitable for the direct evaluation of air gap, they can be used as a good basis for tuning the radiation damping and viscous drag in numerical simulation. In the presented design example, a numerical model is tuned and validated by ANSYS AQWA based on the model test results with a simple 4 line symmetrical horizontal soft mooring system. According to the tuned numerical model, sensitivity analysis studies of air gap motion with respect to the mooring system and wind load are performed in time domain. Three mooring systems and five simulation cases about the presented platform are simulated based on the results of wind tunnel tests and sea-keeping tests. The sensitivity analysis results are valuable for the floating platform design.

Risk Assessment on A Pipeline Passing Through A Ship Mooring Area

It is very common that a submarine pipeline has to pass through a ship mooring area near a harbor zone in the Bohai Bay, China. The risk assessment of accidental events induced by the potential anchoring ships is carried out, which will lead to external interference with the pipeline. A procedure to calculate the probability for the anchoring activity in the ship mooring area to damage the underlying pipeline is proposed. The adopted methodology is based on the recommendations suggested by the DNV Codes. The same philosophy is also applied to estimate the damage probability that is concerned with sinking ships.

Analysis for the Deployment of Single-Point Mooring Buoy System Based on Multi-Body Dynamics Method

Deployment of buoy systems is one of the most important procedures for the operation of buoy system. In the present study, a single-point mooring buoy system which contains surface buoy, cable segments with components, anchor and so on is modeled by applying multi-body dynamics method. The motion equations are developed in discrete node description and fully Cartesian coordinates. Then numerical method is used to solve the ordinary differential equations and dynamics simulations are achieved while anchor is casting from board. The trajectories and velocities of different nodes without current and with current in buoy system are obtained. The transient tension force of each part of the cable is analyzed in the process of deployment. Numerical results indicate that the transient payload increases to a peak value when the anchor is touching the seabed and the maximum tension force will vary with different floating configuration. This work is helpful for design and deployment planning of buoy system.