Impact of Forestry Interventions on Groundwater Recharge and Sediment Control in the Ganga River Basin

Water related services of natural infrastructure will help to combat the risk of water crisis, and nature-based solutions involve the management of ecosystems to mimic or optimize the natural processes for the provision and regulation of water. Forested areas provide environmental stability and supply a high proportion of the world’s accessible freshwater for domestic, agricultural, industrial and ecological needs. The present work on “Forestry Interventions for Ganga” to rejuvenate the river is one of the steps toward the Ganga River rejuvenation programme in the country. The consequences of forestry interventions for Ganga will be determined on the basis of water quantity and water quality in the Ganga River. The study conservatively estimated the water savings and sedimentation reduction of the riverscape management in the Ganga basin using the Soil Conservation Service Curve Number (SCS-CN) & GEC, 2015 and Trimble, 1999 & CWC, 2019 methodologies, respectively. Forestry plantations and soil and moisture conservation measures devised in the programme to rejuvenate the Ganga River are expected to increase water recharge and decrease sedimentation load by 231.011 MCM·yr-1 and 1119.6 cubic m·yr-1 or 395.20 tons·yr-1, respectively, in delineated riverscape area of 83,946 km2 in Ganga basin due to these interventions. The role of trees and forests in improving hydrologic cycles, soil infiltration and ground water recharge in Ganga basin seems to be the reason for this change. Forest plantations and other bioengineering techniques can help to keep rivers perennial, increase precipitation, prevent soil erosion and mitigate floods, drought & climate change. The bioengineering techniques could be a feasible tool to enhance rivers’ self-purification as well as to make river perennial. The results will give momentum to the National Mission of Clean Ganga (NMCG) and its Namami Gange programme including other important rivers in the country and provide inputs in understanding the linkages among forest structure, function, and streamflow.

Software Coupling and Cohesion Model for Measuring the Quality of Software Components

Measuring software quality requires software engineers to understand the system’s quality attributes and their measurements.The quality attribute is a qualitative property;however,the quantitative feature is needed for software measurement,which is not considered during the development of most software systems.Many research studies have investigated different approaches for measuring software quality,but with no practical approaches to quantify and measure quality attributes.This paper proposes a software quality measurement model,based on a software interconnection model,to measure the quality of software components and the overall quality of the software system.Unlike most of the existing approaches,the proposed approach can be applied at the early stages of software development,to different architectural design models,and at different levels of system decomposition.This article introduces a software measurement model that uses a heuristic normalization of the software’s internal quality attributes,i.e.,coupling and cohesion,for software quality measurement.In this model,the quality of a software component is measured based on its internal strength and the coupling it exhibits with other component(s).The proposed model has been experimented with nine software engineering teams that have agreed to participate in the experiment during the development of their different software systems.The experiments have shown that coupling reduces the internal strength of the coupled components by the amount of coupling they exhibit,which degrades their quality and the overall quality of the software system.The introduced model can help in understanding the quality of software design.In addition,it identifies the locations in software design that exhibit unnecessary couplings that degrade the quality of the software systems,which can be eliminated.

Deployment Strategy for Multiple Controllers Based on the Aviation On-Board Software-Defined Data Link Network

In light of the escalating demand and intricacy of services in contemporary terrestrial,maritime,and aerial combat operations,there is a compelling need for enhanced service quality and efficiency in airborne cluster communication networks.Software-Defined Networking(SDN)proffers a viable solution for the multifaceted task of cooperative communication transmission and management across different operational domains within complex combat contexts,due to its intrinsic ability to flexibly allocate and centrally administer network resources.This study pivots around the optimization of SDN controller deployment within airborne data link clusters.A collaborative multi-controller architecture predicated on airborne data link clusters is thus proposed.Within this architectural framework,the controller deployment issue is reframed as a two-fold problem:subdomain partition-ing and central interaction node selection.We advocate a subdomain segmentation approach grounded in node value ranking(NDVR)and a central interaction node selection methodology predicated on an enhanced Artificial Fish Swarm Algorithm(AFSA).The advanced NDVR-AFSA(Node value ranking-Improved artificial fish swarm algorithm)algorithm makes use of a chaos algorithm for population initialization,boosting population diversity and circumventing premature algorithm convergence.By the integration of adaptive strategies and incorporation of the genetic algorithm’s crossover and mutation operations,the algorithm’s search range adaptability is enhanced,thereby increasing the possibility of obtaining globally optimal solutions,while concurrently augmenting cluster reliability.The simulation results verify the advantages of the NDVR-IAFSA algorithm,achieve a better load balancing effect,improve the reliability of aviation data link cluster,and significantly reduce the average propagation delay and disconnection rate,respectively,by 12.8%and 11.7%.This shows that the optimization scheme has important significance in practical application,and can meet the high requirements of modern sea,land,and air operations to aviation airborne communication networks.

Balancing the minimum error rate and minimum copy consumption in quantum state discrimination

Extracting more information and saving quantum resources are two main aims for quantum measurements.However,the optimization of strategies for these two objectives varies when discriminating between quantum states■and■through multiple measurements.In this study,we introduce a novel state discrimination model that reveals the intricate relationship between the average error rate and average copy consumption.By integrating these two crucial metrics and minimizing their weighted sum for any given weight value,our research underscores the infeasibility of simultaneously minimizing these metrics through local measurements with one-way communication.Our findings present a compelling trade-off curve,highlighting the advantages of achieving a balance between error rate and copy consumption in quantum discrimination tasks,offering valuable insights into the optimization of quantum resources while ensuring the accuracy of quantum state discrimination.

Impact of Migrant Populations on Tuberculosis Rates in Saudi Arabia: Assessing How Migration Patterns Affect TB Incidence and Control Measures: A Narrative Review

This research focuses on the effects of migration on the TB infection rate and its prevention in Saudi Arabia, which has a large number of expatriates from TB-affected countries. Despite, based on the current global statistics of TB occurrence, it is evident that the national incidence of TB has reduced from 10.55 per 100,000 in 2015 to 8.36 per 100,000 in 2019;despite this, there are still some difficulties because migrants bring new strains of Mycobacterium tuberculosis. Hindrances, including language barriers and perceived immigration status, hinder patients from seeking medical attention or doctors from diagnosing diseases. Each patient and each cultural group need special attention to public health, enhancing living circumstances, and health care support. Community participation, inclusion of TB control programs into functional healthcare facilities, and the functioning of TB programs need to be stressed to address TB issues. Considering the focus on social, economic, and cultural approaches, the country can make severe advancements in TB control and population protection. This holistic analysis is critical for a long-term effective strategy to combat TB in the Kingdom.

Cause of over Water Quality Standard and Control Measures of State-controlled Sections in Northern Water-deficient Area of Jiangsu

Taking state-controlled section of Xuzhou Peiyan river as an example,the current water quality was monitored,and the cause of over water quality standard was analyzed.The results showed that the pollutants of Peiyan river were mainly from the urban river segment,and the immediate cause of over standard was tributary pollutants in urban river segment with the runoff into rivers.So we should strengthen the maintenance of drainage control and gate-han,accelerate the construction of urban wastewater treatment facilities and supporting pipe network,promote rural decentralized sewage treatment,prevent and control livestock and poultry pollution,pesticides and fertilizers pollution,and intercept non-point source pollution by using eco-technology.

The Measurement and Control of Diameter in Large-Scale Part Processing

Based on laser-scanned measuring technology, a met ho d of on-line dynamic non-contact measurement and feedback control of processin g dimension, i.e. the double edges laser-scanned large diameter on-line dynami c measurement and control system is presented, which can be used to measure diam eter in large-scale machine part processing. In this paper, the working princip le, overall structure and microcomputer real-time control and data processing s ystem of the system are discussed in detail, the method of double edges scanned large diameter dimension measurement and control is theoretically analyzed, its possibility has been verified by experiments of lathing large diameters machine parts by a vertical lathe. The system adopts the measuring scheme of double edge s laser-scanned combined with grating displacement measurement. The two edges c haracteristic information of the measured diameter is given by the double edges laser-scanned measuring system, the non-contact measurement of large diameter dimension is realized to combine with the grating displacement measuring systems . The main controller gives out feedback control signal by means of measured res ults, and controls advance and retreat of lathe tool by the servo-control syste m of a vertical lathe to realize on-line dynamic non-contact measurement and c ontrol in processing.

MEASUREMENT AND CONTROL OF THE JET FLOTATION COLUMN

According to the new structure of the jet flotation column, a system which can measure and control the parameters of the column flotation system is successfully designed.

The Application of Synthetic Fuzzy Assessing Method in Measurement and Control System of Plating Solution Evaporator

The synthetic fuzzy assessing method is usually applied to sensory evaluation. The method has simple and reliable virtue, and it is consistent with objective evaluation results. Using this method, system status of plating solution evaporator is evaluated, and the result is applied to compensate a fuzzy controller. Experimental results have shown the correctness and the validity of the proposed approach.

Development and application of the standard for infrared intelligent body temperature measurement system in the normalized COVID-19 prevention and control

In the phase of the normalized COVID-19 prevention and control,non-contact temperature measurement is one of the most efficient and convenient methods for initial screening of suspected cases.In the year of 2020 in Wuhan,such non-contact equipment was urgently demanded,standards development in the traditional way cannot satisfy the market needs.So,the research and development of this standard for infrared intelligent body temperature measurement system was carried out in a rapid way.

Experimental and numerical investigation of a self-supplementing dual-cavity plasma synthetic jet actuator

The primary issue regarding the plasma synthetic jet actuator(PSJA)is its performance attenuation at high frequencies.To solve this issue,a self-supplementing,dual-cavity,plasma synthetic jet actuator(SD-PSJA)is designed,and the static properties of the SD-PSJA are investigated through experiments and numerical simulations.The pressure measurement shows that the SD-PSJA has two saturation frequencies(1200 Hz and 2100 Hz),and the experimental results show that both the saturation frequencies decrease as the volume of the bottom cavity of the SD-PSJA increases.As the size of the supplement hole increases,the first saturation frequency increases continuously,while the second saturation frequency shows a trend of first decreasing and then increasing.Numerical simulations show that the working process of the SD-PSJA is similar to that of the PSJA,but the volume of the cavity in the SD-PSJA is smaller than that of the PSJA;the SD-PSJA can supplement air to the top cavity through two holes,thus reducing the refresh time and effectively improving the jet intensity of the actuator at high frequencies.

Novel Distance Measures on Hesitant Fuzzy Sets Based on Equal-Probability Transformation and Their Application in Decision Making on Intersection Traffic Control

The purpose of this study is to reduce the uncertainty in the calculation process on hesitant fuzzy sets(HFSs).The innovation of this study is to unify the cardinal numbers of hesitant fuzzy elements(HFEs)in a special way.Firstly,a probability density function is assigned for any given HFE.Thereafter,equal-probability transformation is introduced to transform HFEs with different cardinal numbers on the condition into the same probability density function.The characteristic of this transformation is that the higher the consistency of the membership degrees in HFEs,the higher the credibility of the mentioned membership degrees is,then,the bigger the probability density values for them are.According to this transformation technique,a set of novel distance measures on HFSs is provided.Finally,an illustrative example of intersection traffic control is introduced to show the usefulness of the given distance measures.The example also shows that this study is a good complement to operation theories on HFSs.

Hygienic and Dietary Measures in Cameroonian Hypertensive Patients Followed at the Douala General Hospital: Knowledge, Compliance and Effect on Blood Pressure Control

Introduction: The management of hypertension is mostly based on pharmacotherapy and hygienic and dietary measures (HDMs) for which little data is available in Cameroon. The concern to improve the quality of life of hypertensive patients led us to study the knowledge, compliance and effect of HDMs among Cameroonian hypertensive patients. Methods: This was a cross-sectional study carried out at the Douala General Hospital;the census of patients was carried out from 05 March to 10 May 2018. The data evaluated were knowledge and compliance with HDMs with an inference of their effect on blood pressure control. Results: We recruited 330 participants at mean age of 60 ± 11 years, 37.9% men;57.3% with blood pressure (BP) controlled. Out of 330 subjects, 308 (93.3%) who had been educated about dietary health measures for hypertension were assessed on knowledge, compliance and effect of these measures against 22 (6.7%) who had never heard about them. Around 85.7% of participants had good knowledge of HDMs and 78.9% had good compliance with them. There was no statistically significant influence of knowledge and compliance with HDMs on blood pressure control. Conclusion: The level of knowledge and adherence to HDMs of hypertensive patients at the Douala General Hospital was appreciable. It is however appropriate for physicians to intensify patient education on HDMs and BP control.

Control of Bursaphelenchus xylophilus in the State-owned Sishibacao Forest Farm of Yunyang County,China

In view of the fact that pine wood nematode disease is the most dominant disease in Pinus massoniana forests,which has the characteristics of strong infectivity,fast transmission speed,and great difficulty in prevention and control,a brief description was made to the occurrence status of pine wood nematode disease and difficulties faced with its control in the State-owned Sishibacao Forest Farm of Yunyang County,China,followed by the analysis on the prevention and control measures from aspects of strict control,epidemic situation monitoring,joint prevention and control,and clearance of infected trees,as well as the existing problems of pine wood nematode disease.Finally,reasonable suggestions including strengthening the construction of talent team were put forward,aiming to provide a beneficial reference for the scientific,efficient,and reasonable control of pine wood nematode disease in Pinus massoniana Lamb.forests of Yunyang State-owned Sishibacao Forest Farm.

Floor heave in the west wing track haulage roadway of the Tingnan Coal Mine: Mechanism and control

Floor heave of a roadway is a dynamic phenomenon that often happens in the roadways of coal mines. It seriously affects safe production in the coal mine. Floor heave has long been one of the most difficult problems to be resolved during coal mining. An analysis of floor heave in the soft rock surrounding the roadway, and the factors influencing it, allowed the deformation mechanism in the west wing double track haulage roadway of the Tingnan Coal Mine to be deduced. Three types of floor heave are observed there: intumescent floor heave, extrusion and mobility floor heave, and compound floor heave. Control measures are proposed that have been adopted during a recent repair engineering project. Control of the floor heave in the west wing track haulage roadway was demonstrated. The reliability and rationality of a combined support technology including floor anchors, an inverted arch, and anchoring of both sides was verified by mine pressure data and the field observations. Waterproofing measures were also under-taken to assist in the control of floor heave.

Present Situation and Control of Outbreaks of Algal Blooms in the Three Gorges Reservoir

After water storage in the Three Gorges Reservoir Region,there are no outbreaks of algal blooms in the main stream of the reservoir region,but the density of algae increases obviously. Outbreaks of algal blooms mainly appeared in the tributaries of the reservoir region such as the Xiangxi River,Daning River,Shennong River and Xiaojiang River,but they did not occur every year. The reasons for outbreaks of algal blooms in the tributaries are shown as follows: the existence of sources of algae(blue-green algae) in the Three Gorges Reservoir is the root cause,and the sources include sources existing and being produced in the reservoir and sources from upstream main stream and its tributaries and other related lakes and reservoirs,of which the sources are mainly from the Dianchi Lake; slight or moderate eutrophication of water is the basic condition;hydrologic and hydrodynamic conditions and suitable temperature are conducive to proliferation and aggregation of algae(blue-green algae) after the operation of the Three Gorges Reservoir until outbreaks of algal blooms appear. Outbreaks of algal blooms in the tributaries of the Three Gorges Reservoir Region mainly appear in backwater reaches; they mainly occur in the tributaries in the north of the reservoir region and near to the dam;they mainly appear from March to July; the dominant species of algae( blue-green algae) in the Three Gorges Reservoir are Pyrrophyta,Bacillariophyta and Chlorophyta,but they tend to change into blue-green algae and other algae. To control outbreaks of algal blooms in the tributaries of the Three Gorges Reservoir Region,it is needed to prevent water containing blue-green algae collected from the Dianchi Lake and other lakes and reservoirs from being input into the lower reaches,reduce pollution load flowing into the Three Gorges Reservoir,use enclosures to change hydrodynamic conditions of backwater reaches of the tributaries appropriately,and adopt biological measures such as culturing fish and planting plants to improve ecosystem of the tributaries and other measures to inhibit and eliminate algae and decrease eutrophication level.

Assessment on the Effects of Hepatitis B Prevention and Control Measures in Western China:A Comparison of Three Population-based Serosurveys

Objective Despite the remarkable progress in efforts to control disease spread,the nationwide elimination of hepatitis B in China is still hindered by the persistently high rate of hepatitis B virus(HBV)infection in Western China.This study aimed to evaluate the strategy of hepatitis B prevention and control in Western China and identify potential areas and strategies for improvement.Methods Susceptible population vaccination,health education,professional training of doctors,and other prevention and control measures have been implemented in Wuwei city since 2010.Data were obtained from three representative cross-sectional serosurveys conducted in 2010,2013,and 2015.The serum samples were subjected to enzyme-linked immunosorbent assays to detect the following seromarkers:HBV surface antigen(HBsAg),antibody against hepatitis B surface antigen(anti-HBs),and antibody against hepatitis B core antigen(anti-HBc).Estimates of variance were determined using Taylor series linearization methods.Results The three serosurveys revealed decreases in the prevalence of HBsAg(7.19% in 2010 vs.6.51% in 2013 vs.5.87% in 2015)and anti-HBc positivity(43.89%vs.32.87%vs.28.46%)and an increase in the prevalence of anti-HBs positivity(49.07%vs.53.66%vs.53.72%)over time.From 2010 to 2015,the legally reported incidence of hepatitis B in Wuwei city decreased from 686.53/100,000 to 53.72/100,000.Notably,persistently high HBsAg-positive rates(above 5.40%)were observed among subjects aged 20–69 years old in the three serosurveys;the prevalence of HBsAg was above 1% among children younger than 10 years old.Furthermore,rural subjects had higher rates of HBsAg and anti-HBc positivity than their urban counterparts(6.04%vs.4.83% and 30.26%vs.20.35%,respectively)in 2015 but had a lower rate of anti-HBs positivity(49.68 vs.55.18%).Multivariate regression analysis showed that age,urban and rural areas,and education level were the main factors affecting HBV infection.Conclusion Although vaccine-based prevention and control measures reduced the rate of HBV infection in Wuwei City over time,the hepatitis B infection rate in children younger than 10 years was still higher than the national average level.Therefore,the prevention and control of mother-to-child transmission and the management of the infected should be the focus of future prevention and control work.

Current Situation and Comprehensive Control Measures of Water Environment in the Chaohu Lake

Based on the analysis of current situation of water environment in the Chaohu Lake,general ideas and measures of controlling the water environment were proposed. In respect of control ideas,controlling outbreaks of blue-green algae should be as one of control goals; it is needed to combine reducing the quantity of blue-green algae with decreasing eutrophication level to make the decrease in the quantity of blue-green algae larger than their natural increase until outbreaks of blue-green algae are eliminated; all kinds of techniques should be combined closely,integrated and innovated,and corresponding safeguard measures should be adopted. In respect of control measures,controlling sources of pollution and intercepting pollutants are basic measures,of which improving sewage treatment capacity and standard greatly is a key measure,and actively controlling pollution from large-scale livestock and poultry breeding is one of main measures; rivers polluted heavily should be controlled,and using microorganisms to purify small and moderate rivers can be as one of preferred techniques; blue-green algae should be dredged deeply to reducing their quantity; water should be transferred from the Yangtze River to the Chaohu Lake or the Hauihe River to purify water bodies and increase environmental capacity; reed wetland should be restored on a large scale to increase vegetation coverage from 5% to 20%; dredging should be combined with the elevation of basement of restored reed wetland.

A Hybrid Evaluation Framework of CMM and COBIT for Improving the Software Development Quality

It is essential to study quality of software production like others. Software productions have special properties. They are intangible. So, qualitative evaluation encountered with complexity. Hence, proposing a model in order to evaluate the quality of Software productions is considerable to most software managers and experts. In this paper, regarding to improve software productions quality, the process of software production has been determined, using CMM standard framework of maturity level. In CMM it does not present a method for measurement and evaluation maturity level, the presented process in CMM standard mapped by COBIT control objectives has been combined in the process of software productions development in developed hybrid framework. In this research, the processes have been mapped utilizing focus and established group, in parallel of software production in different maturity level of CMM mapped by COBIT framework. In order to show the capabilities of proposed framework, the hybrid evaluation model was employed in a software developing organization as a case study. According to the results of evaluation, improvements proceedings and action plans have been proposed and discussed to enhance the software production processes.

A Software-in-the-Loop Implementation of Adaptive Formation Control for Fixed-Wing UAVs

This paper discusses the design and software-in-theloop implementation of adaptive formation controllers for fixedwing unmanned aerial vehicles(UAVs) with parametric uncertainty in their structure, namely uncertain mass and inertia. In fact, when aiming at autonomous flight, such parameters cannot assumed to be known as they might vary during the mission(e.g.depending on the payload). Modeling and autopilot design for such autonomous fixed-wing UAVs are presented. The modeling is implemented in Matlab, while the autopilot is based on ArduPilot, a popular open-source autopilot suite. Specifically, the ArduP ilot functionalities are emulated in Matlab according to the Ardupilot documentation and code, which allows us to perform software-in-the-loop simulations of teams of UAVs embedded with actual autopilot protocols. An overview of realtime path planning, trajectory tracking and formation control resulting from the proposed platform is given. The software-inthe-loop simulations show the capability of achieving different UAV formations while handling uncertain mass and inertia.