INFLUENCE OF TEMPERATURE-DEPENDENT PROPERTIES ON TEMPERATURE RESPONSE AND OPTIMUM DESIGN OF C/M FGMS UNDER THERMAL CYCLIC LOADING

The influence of temperature-dependent properties on temperature response and optimum design of newly developed ceramic-metal functionally graded materials under cyclic thermal loading and high temperature gradient environment is studied. The thermal conductivity of the material is considered to be dependent on the temperature. In this paper, the temperature response of the material is calculated using a nonlinear finite element method. Emphasis is placed on the influence of temperatue-dependent properties on the thermal response and insulation property of the material render the different graded compositional distributions and different heat flux magnitudes. Through the analysis, it is suggested that the influence of temperature-dependent properties can not be neglected in the temperature response analysis and the optimum design process of the material must be based on the temperature-dependent temperature analysis theory.

INFLUENCE OF TEMPERATURE-DEPENDENT PROPERTIES ON THERMAL STRESSES RESPONSE AND OPTIMUM DESIGN OF C/M FGMS UNDER THERMAL CYCLIC LOADING

The influence of temperature-dependent properties on thermal stresses response and optimum design of newly developed ceramic-metal functionally graded materials under cyclic thermal loaning and high temperature gradient environment is studied. The thermal conductivity of material is considered to be dependent on the temperature. In this paper, the thermal stresses response of the material is calculated rising a nonlinear finite element method. Emphasis is placed on the influence of temperature-dependent properties on the thermal stresses response characteristics, the thermal stresses relaxation property and the thermal stresses history under the different graded compositional distributions and different heat flux magnitudes. Through tile analysis. it is suggested that the influence of temperature-dependent properties can not be neglected In the thermal stresses response analysis and the optimum design process of the material must be based on the temperature-dependent thermo-elastic-plastic theory.

THERMO-ELASTIC-PLASTIC RESPONSE AND OPTIMUM DESIGN OF CERAMIC-METAL FGMS-CYCLIC THERML LOADING PROBLEM

The materials are made with a graded composition and microstructure in the thickness direction from the ceramic side to the metal side. The cyclic thermal loading and high temperasure gradient environment are simulated by heating the ceramic surface with a cyclic hear flux input and cooling the metal surface with a flowing liquid niterogen. The thermal and themo-elastic-plastic response of the materials is calculated using the isotropic hardening model and kinetic hardening model. Emphasis is placed on the response analysis under the different graded compositional distributions. Through the response analysis, the optimum design process of the graded composition under the dynamic case is established, which is bused on a unified viewpoint of the heat insulation property, thermal stress relaxation property and stress history feature.

Investigation on thermo-mechanical behavior of reinforced concrete energy pile with large cross-section in saturated sandy soil by model experiments

Energy piles are a new type of heat exchange systems with buried pipes in a pile foundation,which optimize a ground source heat pump system for the utilization of shallow geothermal energy.In this study,based on the principle of similarity,the thermo-mechanical behavior of the model energy pile with a large cross-section in saturated sandy soil was experimentally evaluated.The pre-cast model concrete pile with a diameter of 0.2 m and length of 1.5 m was buried in saturated sand in a steel box with dimensions of 2.5 m×2.5 m×2.0 m(length×width×height).The pile was heated using water in the polyethylene(PE)pipe,which was connected to a water cycle temperature controller.At a constant inlet water temperature of 55℃,three thermal cycles were carried out with the same heating and cooling periods and different water flow rates.The temperature distributions in the pile and soil,in addition to the pore pressure,soil pressure,and displacement of the pile,were monitored to clarify the thermo-mechanical behavior of the pile and soil.The heat transfer efficiency was analyzed based on the temperature difference and water flow rates.The measured strain at different locations in the pile under cyclic thermal loading revealed that the uneven strain that developed in a pile body should be considered for its long-term application.Furthermore,focus should be directed toward the long-term unrecoverable displacement of the energy pile due to the thermal plastic strain and thermal consolidation of the soil.