Application of Spectral Angle Mapper Classification to Discriminate Hydrothermal Alteration in Southwest Birjand, Iran, Using Advanced Spaceborne Thermal Emission and Reflection Radiometer Image Processing

The purpose of this study is to evaluate the Spectral Angle Mapper （SAM） classification method for determining the optimum threshold （maximum spectral angle） to unveil the hydrothermal mineral assemblages related to mineral deposits. The study area indicates good potential for Cu-Au porphyry, epithermal gold deposits and hydrothermal alteration well developed in arid and semiarid climates, which makes this region significant for Advanced Spaceborne Thermal Emission and Reflection Radiometer （ASTER） image processing analysis. Given that achieving an acceptable mineral mapping requires knowing the alteration patterns, petrochemistry and petrogenesis of the igneous rocks while considering the effect of weathering, overprinting of supergene alteration, overprinting of hypogene alteration and host rock spectral mixing, SAM classification was implemented for argillic, sericitic, propylitic, alunitization, silicification and iron oxide zones of six previously known mineral deposits： Maherabad, a Cu-Au porphyry system; Sheikhabad, an upper part of Cu-Au porphyry system; Khoonik, an Intrusion related Au system; Barmazid, a low sulfidation epithermal system; Khopik, a Cu-Au porphyry system; and Hanish, an epithermal Au system. Thus, the investigation showed that although the whole alteration zones are affected by mixing, it is also possible to produce a favorable hydrothermal mineral map by such complementary data as petrology, petrochemistry and alteration patterns.

Polarized radiative transfer considering thermal emission in semitransparent media

The characteristics of the polarization must be considered for a complete and correct description of radiation transfer in a scattering medium. Observing and identifying the polarizition characteristics of the thermal emission of a hot semitransparent medium have a major significance to analyze the optical responses of the medium for different temperatures. In this paper, a Monte Carlo method is developed for polarzied radiative transfer in a semitransparent medium. There are mainly two kinds of mechanisms leading to polarization of light： specular reflection on the Fresnel boundary and scattering by particles. The determination of scattering direction is the key to solve polarized radiative transfer problem using the Monte Carlo method. An optimized rejection method is used to calculate the scattering angles. In the model, the treatment of specular reflection is also considered, and in the process of tracing photons, the normalization must be applied to the Stokes vector when scattering, reflection, or transmission occurs. The vector radiative transfer matrix （VRTM） is defined and solved using Monte Carlo strategy, by which all four Stokes elements can be determined. Our results for Rayleigh scattering and Mie scattering are compared well with published data. The accuracy of the developed Monte Carlo method is shown to be good enough for the solution to vector radiative transfer. Polarization characteristics of thermal emission in a hot semitransparent medium is investigated, and results show that the U and V parameters of Stokes vector are equal to zero, an obvious peak always appear in the Q curve instead of the I curve, and refractive index has a completely different effect on I from Q.

Temperature Dependence of Thermal Emission Rate in Cr: GaAs

The new method of measuring the ratio of thermal emission rate to the photoexcitation constant is presented. The temperature dependence of the ratio for Cr:GaAs is calculated by using the previously published data of two-wave mixing. Results show that the calculating data and previous phenomenological theoretic ones coincide with each other very well.

Selective thermal emission and infrared camouflage based on layered media

Infrared camouflage based on artificial thermal metasurfaces has recently attracted significant attention.By eliminating thermal radiation differences between the object and the background,it is possible to hide a given object from infrared detection.Infrared camouflage is an important element that increases the survivability of aircraft and missiles,by reducing target susceptibility to infrared guided threats.Herein,a simple and practicable design is theoretically presented based on a multilayer film for infrared stealth,with distinctive advantages of scalability,flexible fabrication,and structural simplicity.The multilayer medium consists of silicon substrate,carbon layer and zinc sulfide film,the optical properties of which are determined by transfer matrix method.By locally changing the thickness of the coating film,the spatial tunability and continuity in thermal emission are demonstrated.A continuous change of emissive power is further obtained and consequently implemented to achieve thermal camouflage functionality.In addition,other functionalities,like thermal illusion and thermal coding,are demonstrated by thickness-engineered multilayer films.

Influence of(FeO+Ti O_2) abundance on the microwave thermal emissions of lunar regolith

One of the essential controls on the microwave thermal emissions(MTE) of the lunar regolith is the abundance of Fe O and TiO_2, known as the(Fe O+Ti O_2) abundance(FTA). In this paper, a radiative transfer simulation is employed first to study the change in the brightness temperature(T_B) with FTA under a range of frequencies and surface temperatures. Then, we analyze the influence of FTA on the MTE of the lunar regolith using microwave sounder(CELMS) data from the Chang'E-2 lunar orbiter, Clementine UV-VIS data, and lunar samples recovered from the Apollo and Surveyor projects. We conclude that:(1) FTA strongly influences the MTE of the lunar regolith, but it is not the decisive control, and(2) FTA decreases slightly with depth. This research plays an essential role in appropriately inverting CELMS data to obtain lunar regolith parameters.

Secrets of high thermal emission of transition metal disilicides TMSi_(2)(TM=Ta,Mo)

TMSi_(2)(TM=Ta,Mo)are extensively used as thermal emissivity agents in high emission coatings due to their well-known"high"emissivity in infrared range.However,there is a paucity of the high temperature(HT)emissivity property of these two silicides.Moreover,room temperature(RT)spectrometer measurements have demonstrated that the emittance in infrared range of two silicides was considerably low.Therefore,providing critical HT data and satisfactory elucidation on the emission incompatibility of TMSi_(2)is eagerly needed.In this contribution,combining first principles calculations and Drude model,the reflectance spectra of TMSi_(2)were predicted at both RT and HT.Consistent with spectrometer measurements,the intrinsic emittance of silicides was relatively low in the entire investigated temperatures.To explain the incompatible emission behavior,two simplified models including the majority of high emissivity coating,SiO_(2),were proposed.Intriguingly,with SiO_(2)considered in simulations,no matter covered on the surface or blended in the composites,the emittance of the TMSi_(2)enhanced significantly.Our theoretical results demonstrate the non-negligible significance of oxides on the high temperature performance of silicides and provide the guidelines for improving the emission performance of silicides and searching for potential high emissivity agents.

Thermal Emission of a Disc Body of SemitransparentMaterial

By introducing the concept of radiosity intensity to diffuse surfaces, the ray tracing method is improved to analyze the thermal emission of a disc body of gray semitransparent material. The two plane sur-faces of the disc body are both specularly reflecting, and the fiank surface is either diffusely reflecting or specularly reflecting. The apparent thermal emission from one plane sllrface is investigated with considering the infiuences of the characteristic optical thickness, the dimensionless radius, the refrac-tive index of the material and the reflecting characteristics of the flank surface. The directional and hemispherical emissions show considerable differences under different refiecting characteristics of the flank surface. Moreover, in some cases, the emission not only varies with the viewing direction but also with the apparent emitting position on the plane surface. Some interesting results are presented and discussed.

Calibration of the space-borne microwave humidity sounder based on real-time thermal emission from lunar surface

Calibration is a key issue for quantitative application of meteorological satellite data. The complex space environment may cause many uncertainties in data calibration. A highly stable and reliable calibrator in flight is needed. Because the Moon has no atmosphere and no environmental variation, the physical and chemical properties of its surface are stable in the long term. The Moon might be an ideal candidate for in-flight thermal calibration. In advanced satellite-borne microwave remote sensing such as NOAA-18, the deep space view(DSV) of the microwave humidity sounder(MHS) has viewed the Moon many times every year.Using the thermal-physical properties of the lunar regolith derived from the Diviner infrared(IR) brightness temperature(TB) data,we solve the one-dimensional heat conduction equation to obtain the temperature profile of the near side of the lunar regolith medium. The loss tangents of the regolith medium are retrieved from microwave TB data of the Chinese satellite Chang’e-2. The integrated radiative transfer equation is used to simulate the weighted disk-average TB of the lunar surface for the MHS channels at89, 157, and 183 GHz for the year 2011. The Moon is taken as an extended circular target. The simulated TBs are used to correct the full width at half maximum(FWHM) fitted with the MHS counts. We analyze the influences of the distance between the satellite and the Moon, the lunar phase angle, and the FWHM of the radiometer on the inverted FWHM. The corrected TB data are compared with the simulation. This paper presents a new method for thermal calibration of spaceborne in-flight microwave and millimeter-wave radiometers with the weighted disk-average TB of the lunar surface.

Acoustic emission assessment of interface cracking in thermal barrier coatings

In this paper,acoustic emission（AE） and digital image correlation methods were applied to monitor interface cracking in thermal barrier coatings under compression.The interface failure process can be identifie via its AE features,including buckling,delamination incubation and spallation.According to the Fourier transformation of AE signals,there arefourdifferentfailuremodes：surfaceverticalcracks,opening and sliding interface cracks,and substrate deformation.The characteristic frequency of AE signals from surface vertical cracks is 0.21 MHz,whilst that of the two types of interface cracks are 0.43 and 0.29 MHz,respectively.The energy released of the two types of interface cracks are 0.43 and 0.29 MHz,respectively.Based on the energy released from cracking and the AE signals,a relationship is established between the interface crack length and AE parameters,which is in good agreement with experimental results.

Initiation of vacuum breakdown and failure mechanism of the carbon nanotube during thermal field emission

The carbon nanotube （CNT）-based materials can be used as vacuum device cathodes. Owing to the excellent field emission properties of CNT, it has great potentials in the applications of an explosive field emission cathode. The falling off of CNT from the substrate, which frequently appears in experiments, restricts its application. In addition, the onset time of vacuum breakdown limits the performance of the high-power explosive-emission-cathode-based diode. In this paper, the characteristics of the CNT, electric field strength, contact resistance and the kind of substrate material are varied to study the parameter effects on the onset time of vacuum breakdown and failure mechanism of the CNT by using the finite element method.

Theory of multiphoton photoemission disclosing excited states in conduction band of individual TiO_(2) nanoparticles

A theory of multiphoton photoemission is derived to explain the experimentally observed monotonic decrease with the wavelength in the electron yield of TiO_(2) nanoparticles(NPs)by as large as four orders of magnitude.It is found that the fitting parameter corresponds to the energy position of Ti3d e_(g) and t_(2g) states,and the derived theory is a novel diagnostic of excited states in the conduction band,very importantly,applicable to individual NPs.The difference between four-photon slope NPs and three-photon slope NPs is attributed to the difference in defect density.The success of the theory in solving the puzzling result shows that thermal emission from high-lying levels may dominate over direct multiphoton ionization in solids when the photon number larger than four is required.

Quantitative assessment of the surface crack density in thermal barrier coatings

In this paper, a modified shear-lag model is developed to calculate the surface crack density in thermal barrier coatings（TBCs）. The mechanical properties of TBCs are also measured to quantitatively assess their surface crack density. Acoustic emission（AE） and digital image correlation methods are applied to monitor the surface cracking in TBCs under tensile loading. The results show that the calculated surface crack density from the modified model is in agreement with that obtained from experiments. The surface cracking process of TBCs can be discriminated by their AE characteristics and strain evolution. Based on the correlation of energy released from cracking and its corresponding AE signals, a linear relationship is built up between the surface crack density and AE parameters, with the slope being dependent on the mechanical properties of TBCs.

Vacuum Correlations, Detector Efficiency Fluctuations and Classical Dynamic Violations of CH-Inequality

We study in this paper the possible influence of vacuum fluctuations on photo detection and its background noise in Bell tests. We analyze its consequences on the standard statistical analysis of data showing that it is not fulfilled anymore the conventional hypothesis of a Poisson like probability density distribution of single photodetection events. We assume that vacuum fluctuations are due to real and measurable fluctuating fields, as recently confirmed experimentally, and that their non null correlations outside the light cone contribute to photon coincidence rates making them time dependent. We introduce a generalized Bell like correlation function which contains a new term due to supposed vacuum induced photon counting events. We deduce then a generalization of CH-inequality which takes in account the effect of these vacuum electric fields on detector efficiency. We predict an apparatus temperature fluctuations during photon detection which we suggest could be observed by looking for colored noise thermal emission of the photodetectors, generalizing the standard white noise prediction of C.S.L. models on wave function collapse postulate. We discuss an experimental test of this prediction, based on the idea of inducing a thermal wave on the whole quantum detectors, aimed to observe time dependent deviations from standard stationary statistical predictions of Quantum Mechanics.

Economic and scale prediction of CO_(2)capture,utilization and storage technologies in China

In response to the lack of global quantitative research on the potential and scale prediction of CO_(2) capture,utilization and storage(CCUS)in China under the background of carbon peak and carbon neutrality goals,this study predicts the future economic costs of different links of ccUS technologies and the carbon capture needs of different industries in the scenario of fossil energy continuation.Based on the CO_(2) utilization and storage potential and spatial distribution in China,a cost-scale calculation model for different regions in China in 206o is constructed to predict the whole-process economic cost and its corresponding scale potential of CCUs.The results show that a local+remote storage mode is preferred,together with a local utilization mode,to meet China's 27×10^(8)t/a CO_(2) emission reduction demand under the scenario of fossil energy continuation.Specifically,about 5×10^(8) t CO_(2) emission is reduced by capture utilization,and the whole-process cost is about-1400-200 RMB/t;about 22×10^(8) t CO_(2) emission is reduced by capture storage,and the whole-process cost is about 200-450 RMB/t.According to the model results,it is recommended to develop the chemical utilization industry based on P2X(Power to X,where X is raw material)technology,construct the CcUs industrial cluster,and explore a multi-party win-win cooperation mode.A scheme of national trunk pipeline network connecting areas connecting intensive emission reduction demand areas and target storage areas is suggested.The emission reduction cost of thermal power based on CCUS is calculated to be 0.16 RMB/(kW.h).

Quantitative Assessment of Remotely Sensed Global Surface Models Using Various Land Classes Produced from Landsat Data in Istanbul

Digital elevation model （DEM） is the most popular product for three-dimensional （3D） digital representation of bare Earth surface and can be produced by many techniques with different characteristics and ground sampling distances （GSD）. Space-borne opti- cal and synthetic aperture radar （SAR） imaging are two of the most preferred and modern techniques for DEM generation. Using them, global DEMs that cover almost entire Earth are produced with low cost and time saving processing. In this study, we aimed to assess the Satellite pour robservation de la Terre-5 （SPOT-5）, High Resolution Stereoscopic （HRS）, the Advanced Space-borne Thermal Emission and Reflection Radiometer （ASTER）, and the Shuttle Radar Topography Mission （SRTM） C-band global DEMs, produced with space-borne optical and SAR imaging. For the assessment, a reference DEM derived from 1 ： 1000 scaled digital photogrammetric maps was used. The study is performed in 100 km2 study area in Istanbul including various land classes such as open land, forest, built-up land, scrub and rough terrain obtained from Landsat data. The analyses were realized considering three vertical accuracy types as fundamental, supplemental, and consolidated, defined by national digital elevation program （NDEP） of USA. The results showed that, vertical accuracy of SRTM C-band DEM is better than optical models in all three accuracy types despite having the largest grid spacing. The result of SPOT-5 HRS DEM is very close by SRTM and superior in comparison with ASTER models.

Enhanced Destriping of Satellite Data of Ice Surface in Antarctica

This paper briefly reviews the cause of the striping and then develops a tapered (Chebwin & Kaiser) window finite impulse response (FIR) filter and a constrained least squares FIR filter by reason of the striping of ASTER satellite data . Both filters minimize the stripes in the visible data and simultaneously minimize any distortion in the filtered data. Finally, the results obtained by using these new filtering methods are quantitatively compared with those produced by other destriping methods.

Analysis of Effects of the Arc Voltage on Arc Discharges in a Cathode Ion Source of Neutral Beam Injector

A hot cathode bucket ion source is used for the EAST（experimental advanced superconducting tokamak）neutral beam injector.The thermal electrons emitted from the surface of the cathode are extracted and accelerated by the electric field formed by the arc voltage,which is applied between the arc chamber of the ion source and the cathode.This paper analyzes the effects of arc voltage on the arc discharge in a hot cathode high current ion source.

Fabrication of high-performance non-doped OLEDs by combining aggregation-induced emission and thermally activated delayed fluorescence

Undoubtedly,the realization of"one stone and two birds"is ideal,which is also applicable to the molecular design in the pursuit of excellent performance.Recently,this standpoint has been confirmed again by an interesting story written from the lab of Zujin Zhao,Shi-Jian Su,and BenZhong Tang,at South China University of Technology and the Hong Kong University of Science and Technology,in the design of DBT-BZ-DMAC(Figure 1)[1].Despite its simple structure,DBT-BZ-DMAC exhibits wonderful characteristics,

Morphometric analysis and hydrological implications of the Himalayan River Basin,Goriganga,India,using Remote Sensing and GIS techniques

The application of Geographic Information System(GIS)methodologies offers valuable insights into the hydrological behaviour of watersheds through the analysis of their morphometric attributes.This study focuses on the Goriganga River,a major tributary of the Ganga River system,by conducting a detailed morphometric analysis using Advanced Spaceborne Thermal Emission and Reflection Radiometer(ASTER)imagery with 30 m resolution,alongside survey of India topographic sheets.Thirty-two water-sheds within the river basin were delineated to calculate linear,areal,and relief morphometric parameters,covering a total drainage area of 2,183.11 km^(2).The drainage pattern,primarily dendritic to sub-dendritic,is shaped by the region's topography,geological structure,and precipitation patterns.Classified as a 6th-order basin,the drainage density ranges from 1.21 km/km^(2)to 1.96 km/km^(2),underlining the significant influence of the regional physiography and lithological composition on the stream ordering.Relief analysis suggests the basin is in an early developmental stage,characterised by varying slope gradients and a low to moder-ate risk of soil erosion.The basin's hydrogeology is complex,with aquifer distribution primarily governed by lithological factors.Limestone,due to its high permeability and karst features,forms the principal aquifer,although it is susceptible to contamination.In contrast,groundwater potential in the Basement Gneissic Complex and Schist regions is limited to structurally controlled zones,while shale acts as an aquitard.The basin's heterogeneous aquifer characteristics emphasize the need for localized groundwater management strategies tailored to specific lithological units.The integration of remote sensing and GIS techniques effectively delineates the basin's morphometric and hydrogeological characteristics,providing critical information for the development of sustainable water resource management strategies.

Thermally activated delayed fluorescence materialsensitized helicene enantiomer-based OLEDs:a new strategy for improving the efficiency of circularly polarized electroluminescence

A new strategy of thermally activated delayed fluorescence(TADF)material-sensitized circularly polarized luminescence(CPL)has been proposed for improving the efficiencies of fluorescent circularly polarized organic lightemitting diodes(OLEDs)(CP-OLEDs).Consequently,a pair of helicene enantiomers,(P)-HAI and(M)-HAI,were synthesized.The helicene enantiomers with the rigid helicalπ-skeleton had highly thermal and enantiomeric stabilities,and they also showed excellent photophysical properties,especially,intense mirror-image CPL activities with large luminescence dissymmetry factor(|g_(lum)|)values of about 6×10^(-3).Notably,the CP-OLEDs with the helicene enantiomers as emitters and a TADF molecule as sensitizer not only displayed better performance of lower turn-on voltage(V_(T))of 2.6 V,four-fold maxmium-external quantum efficiency(EQE_(max))of 5.3%,and lower efficiencies roll-off of 1.9%at 1000 cd m^(-2),than those of the devices without TADF sensitizer,but also exhibited intense circularly polarized electroluminescence(CPEL)with the electroluminescence dissymmetry factor(g_(EL))values of-2.3×10^(-3)and+3.0×10^(-3).Meanwhile,this study also represents the first thermally activated sensitized fluorescent CP-OLEDs with markedly enhanced efficiencies and intense CPEL.