A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulati...A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulation structure. How to use the general thermal response factors and z-transfer function coefficients toca1culate the indoor air temperature variation directly is also studied. It is shown through practical use that it iseasy to program with the methods presented in this paper and the calculated results are reliable.展开更多
Thermoelectrics has long been considered as a promising way of power generation for the next decades. So far, extensive efforts have been devoted to the search of ideal thermoelectric materials, which require both hig...Thermoelectrics has long been considered as a promising way of power generation for the next decades. So far, extensive efforts have been devoted to the search of ideal thermoelectric materials, which require both high electrical conductivity and low thermal conductivity. Recently, the emerging Dirac semimetal Cd3As2, a three-dimensional analogue of graphene, has been reported to host ultra-high mobility and good electrical conductivity as metals. Here, we report the observation of unexpected low thermal conductivity in Cd3As2, one order of magnitude lower than the conventional metals or semimetals with a similar electrical conductivity, despite the semimetal band structure and high electron mobility. The power factor also reaches a large value of 1.58 mW.m 1 .K-2 at room temperature and remains non-saturated up to 400 K. Corroborating with the first-principles calculations, we find that the thermoelectric performance can be well-modulated by the carrier concentration in a wide range. This work demonstrates the Dirac semimetal Cd3As2 as a potential candidate of thermoelectric materials.展开更多
Based on three reanalysis datasets—ERA-Interim,NCAR–NCEP and JRA-55—the classification of25 commonly used indexes of the East Asian summer monsoon(EASM)was investigated.The physical nature of two categories of mons...Based on three reanalysis datasets—ERA-Interim,NCAR–NCEP and JRA-55—the classification of25 commonly used indexes of the East Asian summer monsoon(EASM)was investigated.The physical nature of two categories of monsoon index,together with their circulation pattern,climate anomalies,and driving factors,were investigated.Results suggest that the selected 25 monsoon indexes can be classified into two typical categories(CategoryⅠandⅡ),which are dominated by interannual and decadal variabilities of the EASM,respectively.The anomalous circulation patterns and summer rainfall patterns related to the two categories of index also exhibit evident differences.CategoryⅠis closely linked to the low-latitude circulation system and the anomalous circulation pattern is a typical East Asia–Pacific teleconnection pattern.The summer rainfall anomaly exhibits a typical tripole pattern.However,CategoryⅡmainly reflects the impacts of the middle–high latitude circulation system on the summer monsoon and is closely linked to a typical Eurasian teleconnection pattern,which corresponds to a dipole of summer rainfall anomalies.Further analysis suggests that the underlying thermal driving factors of the two categories of monsoon are distinct.The main driving factors of CategoryⅠare the tropical sea surface temperature anomalies(SSTAs),especially ENSO-related SSTAs in the preceding winter and summer SSTAs in the tropical Indian Ocean.The winter signal of Category II summer monsoon anomalous activity mainly originates from the polar region and the middle and high latitudes of the Eurasian continent.CategoryⅡmonsoon activity is also associated with summer SSTAs in the equatorial central Pacific.展开更多
Using a transient thermoreflectance （TTR） technique, several Au films with different thicknesses on glass and SiC substrates are measured for thermal characterization of metMlic nano-films, including the electron ph...Using a transient thermoreflectance （TTR） technique, several Au films with different thicknesses on glass and SiC substrates are measured for thermal characterization of metMlic nano-films, including the electron phonon coupling factor G, interfazial thermal resistance R, and thermal conductivity Ks of the substrate. The rear heating-front detecting （RF） method is used to ensure the femtosecond temporal resolution. An intense laser beam is focused on the rear surface to heat the film, and another weak laser beam is focused on the very spot of the front surface to detect the change in the electron temperature. By varying the optical path delay between the two beams, a complete electron temperature profile can be scanned. Different from the normally used single-layer model, the double-layer model involving interfaciM thermal resistance is studied here. The electron temperature cooling profile can be affected by the electron energy transfer into the substrate or the electron-phonon interactions in the metallic films. For multiple-target optimization, the genetic algorithm （GA） is used to obtain both G and R. The experimental result gives a deep understanding of the mechanism of ultra-fast heat transfer in metals.展开更多
The extensive debris that covers glaciers in the ablation zone of the Himalayan region plays an important part in regulating ablation rates and water availability for the downstream region. The melt rate of ice is det...The extensive debris that covers glaciers in the ablation zone of the Himalayan region plays an important part in regulating ablation rates and water availability for the downstream region. The melt rate of ice is determined by the amount of heat conducted through debris material lying over the ice. This study presents the vertical temperature gradients, thermal properties in terms of thermal diffusivity and thermal conductivity, and positive degree-day factors for the debris-covered portion of Lirung Glacier in Langtang Valley, Nepal Himalaya using field-based measurements from three different seasons.Field measurements include debris temperatures at different debris thicknesses, air temperature, and ice melt during the monsoon(2013), winter(2013), and pre-monsoon(2014) seasons. We used a thermal equation to estimate thermal diffusivity and thermal conductivity, and degree-day factors(DDF) were calculated from cumulative positive temperature and ice melt of the measurement period. Our analysis of debris temperature profiles at different depths of debris show the daily linear gradients of-20.81 °C/m, 4.05 °C/m, and-7.79 °C/m in the monsoon, winter, and pre-monsoon seasons, respectively. The values of thermal diffusivity and thermal conductivity in the monsoon season were 10 times greater than in the winter season. The large difference in these values is attributed to surface temperature and moisture content within the debris. Similarly, we found higher values of DDFs at thinner debris for the pre-monsoon season than in the monsoon season although we observed less melting during the pre-monsoon season. This is attributed to higher cumulative temperature during the monsoon season than in the pre-monsoon season. Our study advances our understanding of heat conductivity through debris material in different seasons, which supports estimating ice melt and discharge from glacierized river basins with debris-covered glaciers in the Himalayan region.展开更多
Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great signifi...Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great significance to reveal the thermal response mechanism of EPMWM based on its complex structural effects.In the present work,virtual manufacturing technology(VMT)was developed to restore the physics-based 3D model of EPMWM.On this basis,the transient thermal analysis is carried out to explore the contact-relevant thermal behavior of EPMWM,and then the spiral unit containing unique structural information are further extracted and counted.In particular,the thermal resistance network is numerically constructed based on the spiral unit through the thermoelectric analogy method to accurately predict the effective thermal conductivity(ETC)of EPMWM.Finally,the thermal diffusivity and specific heat of the samples were obtained by the laser thermal analyzer to calculate the ETC and thermal insulation factor of interest.The results show that the ETC of EPMWM increases with increasing temperature or reducing density under the experimental conditions.The numerical prediction is consistent with the experimental result and the average error is less than 4%.展开更多
Through introducing the analytical problem of the plate with convection into the solution of the transient heat conduction thermal stress field model of the elastic plate, the stress reduction factor is presented expl...Through introducing the analytical problem of the plate with convection into the solution of the transient heat conduction thermal stress field model of the elastic plate, the stress reduction factor is presented explicitly in its dimensionless form. A new stress reduction factor is introduced for the purpose of comparison. The proper- ties and appropriate conditions of the stress reduction factor, the first and second ther- mal shock resistance （TSR） parameters for the high and low Biot numbers, respectively, and the approximation formulas for the intermediate Blot number-interval are discussed. To investigate the TSR of ceramics more accurately, it is recommended to combine the heat transfer theory with the theory of thermoelasticity or fracture mechanics or use a numerical method. The critical rupture temperature difference and the critical rup- ture dimensionless time can be used to characterize the TSR of ceramics intuitively and legibly.展开更多
The purpose of this study is to experimentally analyze the thermal behavior of the walls of a prototype experimental house. A Datalogger and thermocouples were used on the experimental house to determine the temperatu...The purpose of this study is to experimentally analyze the thermal behavior of the walls of a prototype experimental house. A Datalogger and thermocouples were used on the experimental house to determine the temperatures of the exterior and interior walls. Also, “MSR” type HygroPuce was used to determine the exterior and interior temperatures and relative humidity of the habitat. The results show that a wall made of bio-based materials with a mixture of “earth + Hibiscus cannabinus L. fibers” allows reducing the fluctuations of the interior temperatures. We observe the peaks of temperatures on the external walls at 11:00 am and for the interior walls, the peaks are observed at 5:00 pm. The maximum thermal phase shift between the peaks of the external and internal temperatures is about 7.5 hours, and the maximum damping factor is 0.9. Also, we note that the thermal performance of the material used in the design of the envelope of the house is determined by the improvement of the response of the envelope in front of the external thermal solicitations.展开更多
This study analyzes the know-how of local communities, to draw on techniques that make contemporary buildings more energy efficient. The impluvium hut in the locality of Enampore, Casamance, Southern Senegal, served a...This study analyzes the know-how of local communities, to draw on techniques that make contemporary buildings more energy efficient. The impluvium hut in the locality of Enampore, Casamance, Southern Senegal, served as the object of study. The hut, including several rooms, is entirely built with earthen walls, earthen floor, earthen ceiling, covered by a double straw roof and its central courtyard. A room noted (L) and a semi-opened living space were chosen as spaces for hygro-thermal experimentation. The hottest average temperature obtained respectively in the room (L) and in the living space is 25.5˚C and 27˚C when outside is about 34˚C. The thermal amplitude inside room (L) is 0.88˚C, in semi-opened living space, is 2.6˚C and outside is 9.5˚C. With these results we can say that room (L) undergoes very low temperature variations and that there is no need to air-condition in the enclosure. The thermal amplitude makes it possible to see the influence of the earthen walls on the interior temperature and its regularity compared to the fluctuation of the external temperature. The thermal inertia of the building walls was characterized using also the time lag and the decrement factor. They was respectively 7.0 H and 0.093 for the room (L). With this result we can say that this material has a high thermal inertia. For humidity, it is high around 78.5% in the room (L), 66.0% at the semi-open living room, when it is 59.0% outside. Through this study, it is possible that the revalorization of vernacular architecture can be an alternative to reduce the energy consumption of buildings.展开更多
Effects of the form factor on natural convection heat transfer and fluid flow in a two-dimensional cavity filled with Al2O3-nanofluid has been analyzed numerically. A model was developed to explain the behavior of nan...Effects of the form factor on natural convection heat transfer and fluid flow in a two-dimensional cavity filled with Al2O3-nanofluid has been analyzed numerically. A model was developed to explain the behavior of nanofluids taking account of the volume fraction φ. The Navier-Stokes equations are solved numerically by alternating an implicit method (Method ADI) for various Rayleigh numbers varies as 103, 104 and 105. The nanofluid used is aluminum oxide with water Pr = 6.2;solid volume fraction φ is varied as 0%, 5% and 10%. Inclination angle Φ varies from 0° to 90° with a step the 15° and the form report varies as R = 0.25, 0.5, 1 and 4. The problem considered is a two-dimensional heat transfer enclosure. The vertical walls are differentially heated;the right is cold when the left is hot. The horizontal walls are assumed to be insulated. The nanofluid in the cavity is considered as incompressible, Newtonian and laminar flow. The nanoparticles are assumed to have a shape and a uniform size. However, it is supposed that the two fluid phases and nanoparticles are in a state of thermal equilibrium and they sink at the same speed. The thermophysical properties of nanofluids are assumed to be constant at the exception of the variation of density in the force of buoyancy, which is based on the approximation of Boussinesq values.展开更多
为提高井底高温区地热能开采效率,文章构建了一种用于水平地热井开采的喷射式同轴套管换热器。基于有限体积法建立水平段近井底区三维数值仿真模型,对比分析外进内出型(Outside-in and Inside-out type,OI)、内进外出型(Inside-in and O...为提高井底高温区地热能开采效率,文章构建了一种用于水平地热井开采的喷射式同轴套管换热器。基于有限体积法建立水平段近井底区三维数值仿真模型,对比分析外进内出型(Outside-in and Inside-out type,OI)、内进外出型(Inside-in and Outside-out type,IO)和喷射式(Jet Inlet,IOI)同轴套管换热器的流场和温度场,揭示了喷射式换热器强化传热机理。结果表明:IOI型换热器内流体的湍动能增加,并形成涡旋,提高了地热开采效率。通过对比采热性能发现,努塞尔数随质量流量增加而增加,IOI型的努塞尔数比其他两者分别高18.33%~32.48%和5.33%~18.84%;摩擦系数随质量流量增加而降低;相同质量流量下,IOI型换热器热增强系数比其他两者分别高9.13%~13.58%和3.61%~10.24%;IOI型的平均采出温度和平均延米换热量始终在三者中最高。研究结果为提高水平地热井同轴套管式换热器开采效率提供理论依据。展开更多
文摘A new method is presented for getting the general thermal response factors and z-transfer functioncoefficients of a room by synthesizing them from the thermal response factors of different parts of the thermalinsulation structure. How to use the general thermal response factors and z-transfer function coefficients toca1culate the indoor air temperature variation directly is also studied. It is shown through practical use that it iseasy to program with the methods presented in this paper and the calculated results are reliable.
基金supported by the National Young 1000 Talent Plan Chinathe Pujiang Talent Plan in Shanghai,China+2 种基金the National Natural Science Foundation of China(Grant Nos.61322407 and 11474058)the Fund for Fostering Talents in Basic Science of the National Natural Science Foundation of China(Grant No.J1103204)the National Basic Research Program of China(Grant No.2011CB921803)
文摘Thermoelectrics has long been considered as a promising way of power generation for the next decades. So far, extensive efforts have been devoted to the search of ideal thermoelectric materials, which require both high electrical conductivity and low thermal conductivity. Recently, the emerging Dirac semimetal Cd3As2, a three-dimensional analogue of graphene, has been reported to host ultra-high mobility and good electrical conductivity as metals. Here, we report the observation of unexpected low thermal conductivity in Cd3As2, one order of magnitude lower than the conventional metals or semimetals with a similar electrical conductivity, despite the semimetal band structure and high electron mobility. The power factor also reaches a large value of 1.58 mW.m 1 .K-2 at room temperature and remains non-saturated up to 400 K. Corroborating with the first-principles calculations, we find that the thermoelectric performance can be well-modulated by the carrier concentration in a wide range. This work demonstrates the Dirac semimetal Cd3As2 as a potential candidate of thermoelectric materials.
基金supported by the National Natural Science Foundation of China [grant number 41625019]
文摘Based on three reanalysis datasets—ERA-Interim,NCAR–NCEP and JRA-55—the classification of25 commonly used indexes of the East Asian summer monsoon(EASM)was investigated.The physical nature of two categories of monsoon index,together with their circulation pattern,climate anomalies,and driving factors,were investigated.Results suggest that the selected 25 monsoon indexes can be classified into two typical categories(CategoryⅠandⅡ),which are dominated by interannual and decadal variabilities of the EASM,respectively.The anomalous circulation patterns and summer rainfall patterns related to the two categories of index also exhibit evident differences.CategoryⅠis closely linked to the low-latitude circulation system and the anomalous circulation pattern is a typical East Asia–Pacific teleconnection pattern.The summer rainfall anomaly exhibits a typical tripole pattern.However,CategoryⅡmainly reflects the impacts of the middle–high latitude circulation system on the summer monsoon and is closely linked to a typical Eurasian teleconnection pattern,which corresponds to a dipole of summer rainfall anomalies.Further analysis suggests that the underlying thermal driving factors of the two categories of monsoon are distinct.The main driving factors of CategoryⅠare the tropical sea surface temperature anomalies(SSTAs),especially ENSO-related SSTAs in the preceding winter and summer SSTAs in the tropical Indian Ocean.The winter signal of Category II summer monsoon anomalous activity mainly originates from the polar region and the middle and high latitudes of the Eurasian continent.CategoryⅡmonsoon activity is also associated with summer SSTAs in the equatorial central Pacific.
基金supported by the National Natural Science Foundation of China (Grant Nos. 50730006,50976053,and 50906042)
文摘Using a transient thermoreflectance （TTR） technique, several Au films with different thicknesses on glass and SiC substrates are measured for thermal characterization of metMlic nano-films, including the electron phonon coupling factor G, interfazial thermal resistance R, and thermal conductivity Ks of the substrate. The rear heating-front detecting （RF） method is used to ensure the femtosecond temporal resolution. An intense laser beam is focused on the rear surface to heat the film, and another weak laser beam is focused on the very spot of the front surface to detect the change in the electron temperature. By varying the optical path delay between the two beams, a complete electron temperature profile can be scanned. Different from the normally used single-layer model, the double-layer model involving interfaciM thermal resistance is studied here. The electron temperature cooling profile can be affected by the electron energy transfer into the substrate or the electron-phonon interactions in the metallic films. For multiple-target optimization, the genetic algorithm （GA） is used to obtain both G and R. The experimental result gives a deep understanding of the mechanism of ultra-fast heat transfer in metals.
基金the HKH Cryosphere Monitoring Project implemented by the International Centre for Integrated Mountain Development (ICIMOD)supported by the Norwegian Ministry of Foreign Affairs
文摘The extensive debris that covers glaciers in the ablation zone of the Himalayan region plays an important part in regulating ablation rates and water availability for the downstream region. The melt rate of ice is determined by the amount of heat conducted through debris material lying over the ice. This study presents the vertical temperature gradients, thermal properties in terms of thermal diffusivity and thermal conductivity, and positive degree-day factors for the debris-covered portion of Lirung Glacier in Langtang Valley, Nepal Himalaya using field-based measurements from three different seasons.Field measurements include debris temperatures at different debris thicknesses, air temperature, and ice melt during the monsoon(2013), winter(2013), and pre-monsoon(2014) seasons. We used a thermal equation to estimate thermal diffusivity and thermal conductivity, and degree-day factors(DDF) were calculated from cumulative positive temperature and ice melt of the measurement period. Our analysis of debris temperature profiles at different depths of debris show the daily linear gradients of-20.81 °C/m, 4.05 °C/m, and-7.79 °C/m in the monsoon, winter, and pre-monsoon seasons, respectively. The values of thermal diffusivity and thermal conductivity in the monsoon season were 10 times greater than in the winter season. The large difference in these values is attributed to surface temperature and moisture content within the debris. Similarly, we found higher values of DDFs at thinner debris for the pre-monsoon season than in the monsoon season although we observed less melting during the pre-monsoon season. This is attributed to higher cumulative temperature during the monsoon season than in the pre-monsoon season. Our study advances our understanding of heat conductivity through debris material in different seasons, which supports estimating ice melt and discharge from glacierized river basins with debris-covered glaciers in the Himalayan region.
基金National Natural Science Foundation of China(Grant Nos.52175162,51805086 and 51975123)Natural Science Foundation of Fujian Province,China(Grant No.2019J01210)Health Education Joint Project of Fujian Province,China(Grant No.2019-WJ-01).
文摘Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great significance to reveal the thermal response mechanism of EPMWM based on its complex structural effects.In the present work,virtual manufacturing technology(VMT)was developed to restore the physics-based 3D model of EPMWM.On this basis,the transient thermal analysis is carried out to explore the contact-relevant thermal behavior of EPMWM,and then the spiral unit containing unique structural information are further extracted and counted.In particular,the thermal resistance network is numerically constructed based on the spiral unit through the thermoelectric analogy method to accurately predict the effective thermal conductivity(ETC)of EPMWM.Finally,the thermal diffusivity and specific heat of the samples were obtained by the laser thermal analyzer to calculate the ETC and thermal insulation factor of interest.The results show that the ETC of EPMWM increases with increasing temperature or reducing density under the experimental conditions.The numerical prediction is consistent with the experimental result and the average error is less than 4%.
基金Project supported by the National Natural Science Foundation of China (Nos. 90916009 and11172336)
文摘Through introducing the analytical problem of the plate with convection into the solution of the transient heat conduction thermal stress field model of the elastic plate, the stress reduction factor is presented explicitly in its dimensionless form. A new stress reduction factor is introduced for the purpose of comparison. The proper- ties and appropriate conditions of the stress reduction factor, the first and second ther- mal shock resistance （TSR） parameters for the high and low Biot numbers, respectively, and the approximation formulas for the intermediate Blot number-interval are discussed. To investigate the TSR of ceramics more accurately, it is recommended to combine the heat transfer theory with the theory of thermoelasticity or fracture mechanics or use a numerical method. The critical rupture temperature difference and the critical rup- ture dimensionless time can be used to characterize the TSR of ceramics intuitively and legibly.
文摘The purpose of this study is to experimentally analyze the thermal behavior of the walls of a prototype experimental house. A Datalogger and thermocouples were used on the experimental house to determine the temperatures of the exterior and interior walls. Also, “MSR” type HygroPuce was used to determine the exterior and interior temperatures and relative humidity of the habitat. The results show that a wall made of bio-based materials with a mixture of “earth + Hibiscus cannabinus L. fibers” allows reducing the fluctuations of the interior temperatures. We observe the peaks of temperatures on the external walls at 11:00 am and for the interior walls, the peaks are observed at 5:00 pm. The maximum thermal phase shift between the peaks of the external and internal temperatures is about 7.5 hours, and the maximum damping factor is 0.9. Also, we note that the thermal performance of the material used in the design of the envelope of the house is determined by the improvement of the response of the envelope in front of the external thermal solicitations.
文摘This study analyzes the know-how of local communities, to draw on techniques that make contemporary buildings more energy efficient. The impluvium hut in the locality of Enampore, Casamance, Southern Senegal, served as the object of study. The hut, including several rooms, is entirely built with earthen walls, earthen floor, earthen ceiling, covered by a double straw roof and its central courtyard. A room noted (L) and a semi-opened living space were chosen as spaces for hygro-thermal experimentation. The hottest average temperature obtained respectively in the room (L) and in the living space is 25.5˚C and 27˚C when outside is about 34˚C. The thermal amplitude inside room (L) is 0.88˚C, in semi-opened living space, is 2.6˚C and outside is 9.5˚C. With these results we can say that room (L) undergoes very low temperature variations and that there is no need to air-condition in the enclosure. The thermal amplitude makes it possible to see the influence of the earthen walls on the interior temperature and its regularity compared to the fluctuation of the external temperature. The thermal inertia of the building walls was characterized using also the time lag and the decrement factor. They was respectively 7.0 H and 0.093 for the room (L). With this result we can say that this material has a high thermal inertia. For humidity, it is high around 78.5% in the room (L), 66.0% at the semi-open living room, when it is 59.0% outside. Through this study, it is possible that the revalorization of vernacular architecture can be an alternative to reduce the energy consumption of buildings.
文摘Effects of the form factor on natural convection heat transfer and fluid flow in a two-dimensional cavity filled with Al2O3-nanofluid has been analyzed numerically. A model was developed to explain the behavior of nanofluids taking account of the volume fraction φ. The Navier-Stokes equations are solved numerically by alternating an implicit method (Method ADI) for various Rayleigh numbers varies as 103, 104 and 105. The nanofluid used is aluminum oxide with water Pr = 6.2;solid volume fraction φ is varied as 0%, 5% and 10%. Inclination angle Φ varies from 0° to 90° with a step the 15° and the form report varies as R = 0.25, 0.5, 1 and 4. The problem considered is a two-dimensional heat transfer enclosure. The vertical walls are differentially heated;the right is cold when the left is hot. The horizontal walls are assumed to be insulated. The nanofluid in the cavity is considered as incompressible, Newtonian and laminar flow. The nanoparticles are assumed to have a shape and a uniform size. However, it is supposed that the two fluid phases and nanoparticles are in a state of thermal equilibrium and they sink at the same speed. The thermophysical properties of nanofluids are assumed to be constant at the exception of the variation of density in the force of buoyancy, which is based on the approximation of Boussinesq values.
文摘为提高井底高温区地热能开采效率,文章构建了一种用于水平地热井开采的喷射式同轴套管换热器。基于有限体积法建立水平段近井底区三维数值仿真模型,对比分析外进内出型(Outside-in and Inside-out type,OI)、内进外出型(Inside-in and Outside-out type,IO)和喷射式(Jet Inlet,IOI)同轴套管换热器的流场和温度场,揭示了喷射式换热器强化传热机理。结果表明:IOI型换热器内流体的湍动能增加,并形成涡旋,提高了地热开采效率。通过对比采热性能发现,努塞尔数随质量流量增加而增加,IOI型的努塞尔数比其他两者分别高18.33%~32.48%和5.33%~18.84%;摩擦系数随质量流量增加而降低;相同质量流量下,IOI型换热器热增强系数比其他两者分别高9.13%~13.58%和3.61%~10.24%;IOI型的平均采出温度和平均延米换热量始终在三者中最高。研究结果为提高水平地热井同轴套管式换热器开采效率提供理论依据。
