Recognition of two dominant modes of EASM and its thermal driving factors based on 25 monsoon indexes

Based on three reanalysis datasets—ERA-Interim,NCAR–NCEP and JRA-55—the classification of25 commonly used indexes of the East Asian summer monsoon(EASM)was investigated.The physical nature of two categories of monsoon index,together with their circulation pattern,climate anomalies,and driving factors,were investigated.Results suggest that the selected 25 monsoon indexes can be classified into two typical categories(CategoryⅠandⅡ),which are dominated by interannual and decadal variabilities of the EASM,respectively.The anomalous circulation patterns and summer rainfall patterns related to the two categories of index also exhibit evident differences.CategoryⅠis closely linked to the low-latitude circulation system and the anomalous circulation pattern is a typical East Asia–Pacific teleconnection pattern.The summer rainfall anomaly exhibits a typical tripole pattern.However,CategoryⅡmainly reflects the impacts of the middle–high latitude circulation system on the summer monsoon and is closely linked to a typical Eurasian teleconnection pattern,which corresponds to a dipole of summer rainfall anomalies.Further analysis suggests that the underlying thermal driving factors of the two categories of monsoon are distinct.The main driving factors of CategoryⅠare the tropical sea surface temperature anomalies(SSTAs),especially ENSO-related SSTAs in the preceding winter and summer SSTAs in the tropical Indian Ocean.The winter signal of Category II summer monsoon anomalous activity mainly originates from the polar region and the middle and high latitudes of the Eurasian continent.CategoryⅡmonsoon activity is also associated with summer SSTAs in the equatorial central Pacific.

Cracked elastic substrate strip with functionally graded coating under thermal-mechanical loading

This paper investigates the functionally graded coating bonded to an elastic strip with a crack under thermal- mechanical loading. Considering some new boundary conditions, it is assumed that the temperature drop across the crack surface is the result of the thermal conductivity index which controls heat conduction through the crack region. By the Fourier transforms, the thermal-elastic mixed boundary value problems are reduced to a system of singular integral equations which can be approximately solved by applying the Chebyshev polynomials. The numerical computation methods for the temperature, the displacement field and the thermal stress intensity factors （TSIFs） are presented. The normal temperature distributions （NTD） with different parameters along the crack surface are analyzed by numerical examples. The influence of the crack position and the thermal-elastic non- homogeneous parameters on the TSIFs of modes I and 11 at the crack tip is presented. Results show that the variation of the thickness of the graded coating has a significant effect on the temperature jump across the crack surfaces when keeping the thickness of the substrate constant, and the thickness of functionally graded material （FGM） coating has a significant effect on the crack in the substrate. The results can be expected to be used for the purpose of gaining better understanding of the thermal-mechanical behavior of graded coatings.

Thermal performance assessment of self-rotating twisted tapes and Al_(2)O_(3) nanoparticle in a circular pipe

In view of the practical importance of the heat transfer devices in various thermal engineering fields including chemical and nuclear engineering,this study aims at developing an effective method of heat transfer enhancement by using selfrotating twisted tapes(SRTTs)and Al_(2)O_(3) nanoparticles.The effect of the selfrotating twisted tapes and Al2O3 nanoparticles on the thermal performance was comprehensively investigated in a circular pipe.The experimental results indicated the heat transfer rate was effectively improved by SRTTs in comparison of plain tube.In addition,the heat transfer multiplier with SRTTs decreased from 1.38 to 1.08 with the Reynolds number increasing from 19,322 to 64,407,while the friction factor multiplier decreased from 1.61 to 1.32.Besides,the results indicated that the employment of Al_(2)O_(3) nanoparticles and SRTTs demonstrated superior thermal performance to the single SRTTs.As Reynolds number increases from 19,322 to 64,407,the heat transfer multiplier decreased from 2.08 to 1.18 in the mass concentration of 3.0%and from 1.38 to 1.08 in mass concentration of 0.0%.Finally,the new heat transfer and friction factor correlations considering the combined effect of Al2O3 nanoparticle and SRTTs were developed within 10%deviation of experimental values.

Investigation into the thermal effect of the LIPS-200 ion thruster plume

The distribution of the thermal effects of the ion thruster plume are essential for estimating the influence of the thruster plume, improving the layout of the spacecraft, and for the thermal shielding of critical sensitive components. In order to obtain the heat flow distribution in the plume of the LIPS-200 xenon ion thruster, an experimental study of the thermal effects of the plume has been conducted in this work,with a total heat flow sensor and a radiant heat flow sensor over an axial distance of 0.5–0.9 m and a thruster angle of 0°–60°. Combined with a Faraday probe and a retarding potential analyzer, the thermal accommodation coefficient of the sensor surface in the plume is available. The results of the experiment show that the xenon ion thruster plume heat flow is mainly concentrated within a range of15°. The total and radial heat flow of the plume downstream of the thruster gradually decreases along the axial and radial directions, with the corresponding values of 11.78 k W m^(-2) and 0.3 k W m^(-2) for the axial 0.5 m position, respectively. At the same position, the radiation heat flow accounts for a very small part of the total heat flow, approximately 3%–5%. The thermal accommodation factor is0.72–0.99 over the measured region. Furthermore, the PIC and DSMC methods based on the Maxwell thermal accommodation coefficient model(EX-PWS) show a maximum error of 28.6% between simulation and experiment for LIPS-200 ion thruster plume heat flow, which, on the one hand, provides an experimental basis for studying the interaction between the ion thruster and the spacecraft, and on the other hand provides optimization of the ion thruster plume simulation model.

Thermal performance of tubular heat exchanger with multiple twisted-tape inserts

The paper presents an experimental investigation on enhanced heat transfer and pressure loss characteristics by using single, double, triple, and quadruple twisted-tape inserts in a round tube having a uniform heat-fluxed wall. The investigation has been conducted in the heat exchanger tube inserted with various twisted-tape numbers for co- and counter-twist arrangements for the turbulent air flow, Reynolds number （Re） from 5300 to 24000. The typical single twisted-tape inserts at two twist ratios, y/w = 4 and 5, are used as the base case, while the other multiple twisted-tape inserts are aty/w = 4 only. The experimental results of heat transfer and pressure drop in terms of Nusselt number （Nu） and friction factor 00, respectively, reveal that Nu increases with the increment of Re and of twisted-tape number. The values of Nu for the inserted tube are in a range of 1.15-2.12 times that for the plain tube while f is 1.9-4.1 times. The thermal enhancement factor of the inserted tube under similar pumping power is evaluated and found to be above unity except for the single and the double co-twisted tapes. The quadruple counter-twisted tape insert provides the maximum thermal performance.

Numerical and experimental evaluation for density-related thermal insulation capability of entangled porous metallic wire material

Entangled porous metallic wire material(EPMWM)has the potential as a thermal insulation material in defence and engineering.In order to optimize its thermophysical properties at the design stage,it is of great significance to reveal the thermal response mechanism of EPMWM based on its complex structural effects.In the present work,virtual manufacturing technology(VMT)was developed to restore the physics-based 3D model of EPMWM.On this basis,the transient thermal analysis is carried out to explore the contact-relevant thermal behavior of EPMWM,and then the spiral unit containing unique structural information are further extracted and counted.In particular,the thermal resistance network is numerically constructed based on the spiral unit through the thermoelectric analogy method to accurately predict the effective thermal conductivity(ETC)of EPMWM.Finally,the thermal diffusivity and specific heat of the samples were obtained by the laser thermal analyzer to calculate the ETC and thermal insulation factor of interest.The results show that the ETC of EPMWM increases with increasing temperature or reducing density under the experimental conditions.The numerical prediction is consistent with the experimental result and the average error is less than 4%.

Crack patterns corresponding to the residual strength plateau of ceramics subjected to thermal shock

The formation strength plateau of ceramics is addressed. A set of of 99A1203 are conducted, mechanism of the residual subjected to thermal shock thermal shock experiments where the thin specimens of 1 mm× 10 mm×50 mm exhibit parallel through edge cracks, and thus permit quantitative measurements of the crack patterns. The cracks evolve with the severity of ther- mal shock. It is found that there is a correlation between the length and density of the thermal shock cracks. The increase of crack length weakens the residual strength, whereas the increase of crack density improves it. In a considerably wide temperature range, the two contrary effects just counteract each other; consequently a plateau appears in the variation curve of the residual strength. A comparison between the numerical and experimental results of the residual strength is made, and they are found in good agreement. This work is helpful to a deep understanding of the thermal shock failure of ceramics.

Luminescent properties of thermally activated delayed fluorescence molecule with intramolecular π-π interaction between donor and acceptor

Influence of intramolecular π-π interaction on the luminescent properties of thermally activated delayed fluorescence（TADF） molecule（3, 5-bis（3,6-di-tert-butyl-9 H-carbazol-9-yl）-phenyl）（pyridin-4-yl） methanone（DTCBPY） is theoretically studied by using the density functional theory（DFT） and time-dependent density functional theory（TD-DFT）.Four conformations（named as A, B, C, and D） of the DTCBPY can be found by relax scanning, and the configuration C corresponds to the luminescent molecule detected experimentally. Besides, we calculate the proportion of each conformation by Boltzmann distribution, high configuration ratios（44% and 52%） can be found for C and D. Moreover, C and D are found to exist with an intramolecular π-π interaction between one donor and the acceptor; the intramolecular interaction brings a smaller Huang-Rhys factor and reduced reorganization energy. Our work presents a rational explanation for the experimental results and demonstrates the importance of the intramolecular π-π interaction to the photophysical properties of TADF molecules.

Improving Heat Transfer in Parabolic Trough Solar Collectors by Magnetic Nanofluids

A parabolic trough solar collector(PTSC)converts solar radiation into thermal energy.However,low thermal efficiency of PTSC poses a hindrance to the deployment of solar thermal power plants.Thermal performance of PTSC is enhanced in this study by incorporating magnetic nanoparticles into the working fluid.The circular receiver pipe,with dimensions of 66 mm diameter,2 mm thickness,and 24 m length,is exposed to uniform temperature and velocity conditions.The working fluid,Therminol-66,is supplemented with Fe3O4 magnetic nanoparticles at concentrations ranging from 1%to 4%.The findings demonstrate that the inclusion of nanoparticles increases the convective heat transfer coefficient(HTC)of the PTSC,with higher nanoparticle volume fractions leading to greater heat transfer but increased pressure drop.The thermal enhancement factor(TEF)of the PTSC is positively affected by the volume fraction of nanoparticles,both with and without a magnetic field.Notably,the scenario with a 4%nanoparticle volume fraction and a magnetic field strength of 250 G exhibits the highest TEF,indicating superior thermal performance.These findings offer potential avenues for improving the efficiency of PTSCs in solar thermal plants by introducing magnetic nanoparticles into the working fluid.

850 nm Implant-confined VCSEL Temperature Characteristics

The temperature characteristics of VCSEL using proton implantation are described,compared with its edge-emitting counterpart.Implant-confined VCSEL operation has been realized up to 120 ℃.These records of high operating temperature are caused by high characteristic temperature. The relevant physical mechanisms including their dependence on temperature and carrier density are considered. The temperature sensitivity of the threshold current is not strongly increasing with higher temperature.

Sap flow characteristics of three afforestation species during the wet and dry seasons in a dry-hot valley in Southwest China

Assessing and using tree species （exotic or native） with superior tolerance to environmental stresses （such as drought and high temperature） play an important role in afforestation practices. In the present study, stem sap flow characteristics and responses to ambient meteo- rological factors of three tree species, Albizzia kalkora （native）, Azadirachta indica （exotic）, and Acacia auriculaeformis （exotic）, in a dry-hot valley （Yuanmou, Yunnan Province, China） were investigated using thermal dissipation probes. The diurnal dynamics of sap flow in three studied species displayed an obvious circadian rhythm during the wet and dry seasons, with the exception of A. indica during the dry season. The sap flow velocity （SFV） in A. kalkora and A. auriculaeformis was significantly positively correlated with photosynthetically active radiation （PAR）, air temperature, vapour pressure deficit （VPD） and wind speed, but negatively correlated with atmospheric relative humidity over the two seasons. The cross-corre- lation analysis also revealed that the SFV of the three species was significantly correlated with PAR and VPD （P 〈 0.001）. Additionally, stem sap flow lagged behind PAR but ahead of VPD, and the diurnal sap flow was more dependent on PAR than on VPD. However, we found that the dominant climatic factor influencing the stem sap flow differed between daytime and nighttime. PAR was more influential than other meteorological factors during the daytime, while VPD or other factors were more influential overnight. When the nighttime refilling ability of the three tree species was compared, our results suggest that A. indica has higher drought resistance and better for afforestation of the studied region.

Experimental Study of Heat Transfer Enhancement and Friction Loss Induced by Inserted Rotor-assembled Strand （II） Lubricant Oil 22

The paper described experimental investigation of heat transfer and single-phase pressure drop through tubes with different rotor-assembled strands inserted in the Reynolds number range of 800-9000 with lubricant as working fluid. In the experiment, fixed mounts were employed to eliminate the entrance effect. The experimental results showed that the employment of fixed mounts led to a visible bias of friction factor in the laminar regime while it could not affect the Nusselt numbers significantly. Experiment for the tube inserted with rotors-assembled strand showed remarkable improvement for heat transfer with the Nusselt number increased by 200%-225% in the laminar regime and 125%-160% in the transitional regime. Meanwhile, the friction factor increased inevitably by 200%-300% within the same range of Reynolds number. The comparison of different rotor-assembled strands in-serted tubes and plain tube showed that the heat transfer benefited from the increase of the diameter of rotor-assembled strand with the same lead and the decrease of the lead of rotor-assembled strand, so does the friction factor. Based on experimental data and thorough multivariant linear normal regression method, the correlations of average Nusselt number and friction factor are established.

Enhanced heat transfer in a heat exchanger square-duct with discrete V-finned tape inserts

The article presents an experimental and numerical study on thermal performance enhancement in a constant heatfluxed square-duct inserted diagonally with 45° discrete V-finned tapes(DFT).The experiments were carried out by varying the airflow rate through the tested square duct with DFT inserts for Reynolds number from 4000 to 25000.The effect of the DFT with V-tip pointing upstream at various relative fin heights and pitches on heat transfer and pressure drop characteristics was experimentally investigated.Both the heat transfer and pressure drop were presented in terms of Nusselt number and friction factor respectively.Several V-finned tape characteristics were introduced such as fin- to duct-height ratio or blockage ratio(R_B=e/H = 0.075,0.1,0.15 and 0.2),fin pitch to duct height ratio(R_P= P/H=0.5,1.0,1.5 and 2.0) and fin attack angle,α = 45°.The experimental results reveal that the heat transfer and friction factor values with DFT inserts increase with the increment of R_B but the decrease of R_P.The inserted square-duct at R_B = 0.2 and R_P = 0.5 provides the highest heat transfer and friction factor while the one with R_B= 0.1 and R_P= 1.5 yields the highest thermal performance.Also,a numerical simulation was conducted to investigate the flow structure and heat transfer mechanism inside the tested duct with DFT inserts.

Influence of thermal effects on elastohydrodynamic(EHD) lubrication behavior at high speeds

This paper describes a study of point contact elastohydrodynamic(EHD)lubrication behavior at high speeds(up to 20 m s1).Central film thicknesses were measured by optical interferometry device.The influence of slide-roll ratio and operating temperature on the central film thickness was determined.The influence of thermal effects on the reduction of film thickness was discussed via the analysis of numerical simulation method considering thermal effects.Subsequently,the experimental data was used to amend a set of unified parameters for the thermal corrections for different types of oil at high speeds.

Thermoelectric properties of Yb x Co_4 Sb_(12) system

Yb x Co 4 Sb 12 polycrystals were fabricated by vacuum melting combined with hot-press sintering.The effect of Yb-filling on thermoelectric property of unfilled skutterudite CoSb 3 was investigated,which indicated the enhancement of the power factor of the material.Transport properties of materials changed from semi-conductor to semi-metal during the measurement of electrical conductivity,which indicated the change of electronic band structure.The maximum value of electrical conductivity was about 190000 S/m at 300 K for all samples.On the basis of Yb-filling,power factor of Yb 0.2 Co 4 Sb 12 reached 5-6 mW/（m·K） during the measurement temperature.Thermal conductivity decreased with increase of Yb content,and the thermal conductivity of Yb 0.2 Co 4 Sb 12 reached 3.2 W/（m·K） at 600 K.The ZT value of Yb 0.2 Co 4 Sb 12 reached 1.16 at 700 K due to positive contribution from high power factor and low thermal conductivity.