A system was developed to identify characteristics of quenchants. It consists of computerized hardware, temperature acquisition software as well as changeable probes of steels. The feature of the ability to use probes...A system was developed to identify characteristics of quenchants. It consists of computerized hardware, temperature acquisition software as well as changeable probes of steels. The feature of the ability to use probes made of any metallic material enables evaluation of hardening power of quenchants. Three thermal couples located on the same cross-section plane in the middle of probe’s length give cooling curves that present cooling behavior at different depths from the surface of probe. Microstructure and hardness of the quenched probes on the same plane in the middle of probe’s length from surface to center was investigated to estimate hardening effect. A number of quenchants were tested by this characterization system with several thermal probes of typical steels. Experimental data were stored in QuenDB quenchant database, which was designed for quenchants identification and hardness distribution storage.展开更多
The measuring principle and experimental results of the enthalpy probe technique for thermal plasma diagnostics are presented. Its calibration and errors are discussed. Typical results are presented for the system ope...The measuring principle and experimental results of the enthalpy probe technique for thermal plasma diagnostics are presented. Its calibration and errors are discussed. Typical results are presented for the system operation in an Ar/H2(5 % H2) plasma arc jet under a reactor chamber pressure of 101.3 kPa. The plasma temperature and velocity profiles are measured. The center temperature and velocity are 6600 K and 850 m/s for plasma power 9 kW at axial location of 17 mm.展开更多
The authors presented a new measuring method of the soil thermal conductivity,the probe method,which is designed and made based on the theory of line heat source. This method is used to measure thermal conductivity of...The authors presented a new measuring method of the soil thermal conductivity,the probe method,which is designed and made based on the theory of line heat source. This method is used to measure thermal conductivity of coarse sand,fine sand and silty clay in different water contents. The results that measured by the probe method are well consistent with those of QTM-D_2. The soil thermal conductivity increases in different levels with the increase of the water content. Compared the soil thermal conductivity measured by the probe method in laboratory with in-situ experiment,it shows that the measuring gap gradually increases with the increase of the depth. The reason is that the in-situ measuring thermal conductivity can reflect the actual situation of the soil mass.展开更多
We have reported a method for measuring the thermal conductivity of liguids un-der high pressure previously [1,2].Such data are necessary for improving thetechnologies such like processing as acidity,pressure cracking...We have reported a method for measuring the thermal conductivity of liguids un-der high pressure previously [1,2].Such data are necessary for improving thetechnologies such like processing as acidity,pressure cracking,thermal exploitation ofpetroleum,etc. An apparatus has thus been constructed,as shown schematically in Fig.1,tomeasure the thermal conductivity of liquids under pressure up to 25 MPa and temperatureranging from 150 to 250℃.The thermal conductivity cell is cylindrical in from,35mmin length and 25mm in inner diameter.The sample is poured into the cell through展开更多
Imperfections in the(001) plate of rubidium hydrogen phthalate(RAP, RbC8H5O4) crystals have been studied by means of X-ray topography. The main defects are the grown-in dislocations, inclusions, growth layers and the ...Imperfections in the(001) plate of rubidium hydrogen phthalate(RAP, RbC8H5O4) crystals have been studied by means of X-ray topography. The main defects are the grown-in dislocations, inclusions, growth layers and the thermal strain lobes caused by heat. The large thermal strain nature was determined by an Inclusion Probed Method (IPM), which is due to the gradient of the interplanar spacing formed by atomic displacement to <110> directions.展开更多
文摘A system was developed to identify characteristics of quenchants. It consists of computerized hardware, temperature acquisition software as well as changeable probes of steels. The feature of the ability to use probes made of any metallic material enables evaluation of hardening power of quenchants. Three thermal couples located on the same cross-section plane in the middle of probe’s length give cooling curves that present cooling behavior at different depths from the surface of probe. Microstructure and hardness of the quenched probes on the same plane in the middle of probe’s length from surface to center was investigated to estimate hardening effect. A number of quenchants were tested by this characterization system with several thermal probes of typical steels. Experimental data were stored in QuenDB quenchant database, which was designed for quenchants identification and hardness distribution storage.
文摘The measuring principle and experimental results of the enthalpy probe technique for thermal plasma diagnostics are presented. Its calibration and errors are discussed. Typical results are presented for the system operation in an Ar/H2(5 % H2) plasma arc jet under a reactor chamber pressure of 101.3 kPa. The plasma temperature and velocity profiles are measured. The center temperature and velocity are 6600 K and 850 m/s for plasma power 9 kW at axial location of 17 mm.
基金Supported by Project of National Natural Science Foundation of China(No.41372239)
文摘The authors presented a new measuring method of the soil thermal conductivity,the probe method,which is designed and made based on the theory of line heat source. This method is used to measure thermal conductivity of coarse sand,fine sand and silty clay in different water contents. The results that measured by the probe method are well consistent with those of QTM-D_2. The soil thermal conductivity increases in different levels with the increase of the water content. Compared the soil thermal conductivity measured by the probe method in laboratory with in-situ experiment,it shows that the measuring gap gradually increases with the increase of the depth. The reason is that the in-situ measuring thermal conductivity can reflect the actual situation of the soil mass.
文摘We have reported a method for measuring the thermal conductivity of liguids un-der high pressure previously [1,2].Such data are necessary for improving thetechnologies such like processing as acidity,pressure cracking,thermal exploitation ofpetroleum,etc. An apparatus has thus been constructed,as shown schematically in Fig.1,tomeasure the thermal conductivity of liquids under pressure up to 25 MPa and temperatureranging from 150 to 250℃.The thermal conductivity cell is cylindrical in from,35mmin length and 25mm in inner diameter.The sample is poured into the cell through
文摘Imperfections in the(001) plate of rubidium hydrogen phthalate(RAP, RbC8H5O4) crystals have been studied by means of X-ray topography. The main defects are the grown-in dislocations, inclusions, growth layers and the thermal strain lobes caused by heat. The large thermal strain nature was determined by an Inclusion Probed Method (IPM), which is due to the gradient of the interplanar spacing formed by atomic displacement to <110> directions.