Analysis of thermal-mechanical coupled characteristics of vehicle twin-tube shock absorber

A comprehensive model that included mechanical dynamics of the shock absorber coupled with its thermal properties was proposed innovatively.Moreover a thermal-mechanical coupled model which reflected the closed-loop positive feedback system was established by using MATLAB/SIMULINK,and some curves of shock absorber temperature rising characteristic were obtained by simulation ＆computation under several operating modes and different parameters conditions.Research results show that：shock absorber design parameters,external excitations,and thermo-physical properties parameter,such as oil density have effect on the shock absorber temperature rising characteristic.However other thermo-physical properties parameters,such as oil specific heat,cylinder density,cylinder specific heat,and cylinder thermal conductivity,have no effect on it.The results may be used for studying reliability design of the shock absorber.

Thermal-Mechanical Coupled FE Analysis for Rotary Shaft Seals

The aim of this paper is to model the steady-state condition of a rotary shaft seal (RSS) system. For this, an iterative thermal-mechanical algorithm was developed based on incremental finite element analyzes. The behavior of the seal’s rubber material was taken into account by a large-strain viscoelastic, so called generalized Maxwell model, based on Dynamic Mechanical Thermal Analyses (DMTA) and tensile measurements. The pre-loaded garter spring was modelled with a bilinear material model and the shaft was assumed to be linear elastic. The density, coefficient of thermal expansion and the thermal conductance of the materials were taken into consideration during simulation. The friction between the rotary shaft seal and the shaft was simplified and modelled as a constant parameter. The iterative algorithm was evaluated at two different times, right after assembly and 1 h after assembly, so that rubber material’s stress relaxation effects are also incorporated. The results show good correlation with the literature data, which state that the permissible temperature for NBR70 (nitrile butadiene rubber) material contacting with ~80 mm shaft diameter, rotating at 2600/min is 100°C. The results show 107°C and 104°C for the two iterations. The effect of friction induced temperature, changes the width of the contact area between the seal and the shaft, and significantly reduces the contact pressure.

Soliton Solutions of a Coupled KdV System via Backlund Transformation

In this paper we use Böcklund transformation to construct soliton solutions for a coupled KdV system.This system was first proposed by Wang in 2010.First we generalize the well-known Bäcklund transformation for the KdV equation to such coupled KdV system.Then from a trivial seed solution,we construct soliton solutions.We also give a nonlinear superposition formula,which allows us to generate multi-soliton solutions.

Four-wave mixing Bragg scattering for small frequency shift from silicon coupled microrings

Frequency conversion is pivotal in nonlinear optics and quantum optics for manipulating and translating light signals across different wavelength regimes.Achieving frequency conversion between two light beams with a small frequency interval is a central challenge.In this work,we design a pair of coupled silicon microrings wherein coupled-induced modesplitting exists to achieve a small frequency shift by the process of four-wave mixing Bragg scattering.As an example,the signal can be up or down converted to the idler which is 15.5 GHz spaced when two pumps align with another pair of split resonances.The results unveil the potential of coupled microring resonators for small interval frequency conversion in a high-fidelity,all-optical,and signal processing quantum frequency interface.

Regional Storm Surge Forecast Method Based on a Neural Network and the Coupled ADCIRC-SWAN Model

Timely and accurate forecasting of storm surges can effectively prevent typhoon storm surges from causing large economic losses and casualties in coastal areas.At present,numerical model forecasting consumes too many resources and takes too long to compute,while neural network forecasting lacks regional data to train regional forecasting models.In this study,we used the DUAL wind model to build typhoon wind fields,and constructed a typhoon database of 75 processes in the northern South China Sea using the coupled Advanced Circulation-Simulating Waves Nearshore(ADCIRC-SWAN)model.Then,a neural network with a Res-U-Net structure was trained using the typhoon database to forecast the typhoon processes in the validation dataset,and an excellent storm surge forecasting effect was achieved in the Pearl River Estuary region.The storm surge forecasting effect of stronger typhoons was improved by adding a branch structure and transfer learning.

Dynamic compressive characteristics of a green sandstone under coupled hydraulic-mechanical loading: Experiments and theoretical modeling

Deep rock is under a complex geological environment with high geo-stress, high pore pressure, and strong dynamic disturbance. Understanding the dynamic response of rocks under coupled hydraulic-mechanical loading is thus essential in evaluating the stability and safety of subterranean engineering structures. Nevertheless, the constraints in experimental techniques have led to limited prior investigations into the dynamic compression behavior of rocks subjected to simultaneous high in-situ stress and pore pressure conditions. This study utilizes a triaxial split Hopkinson pressure bar (SHPB) system in conjunction with a pore pressure loading cell to conduct dynamic experiments on rocks subjected to hydraulic-mechanical loading. A porous green sandstone (GS) was adopted as the testing rock material. The findings reveal that the dynamic behavior of rock specimens is significantly influenced by multiple factors, including the loading rate, confining stress, and pore pressure. Specifically, the dynamic compressive strength of GS exhibits an increase with higher loading rates and greater confining pressures, while it decreases with elevated pore pressure. Moreover, the classical Ashby-Sammis micromechanical model was augmented to account for dynamic loading and pore pressure considerations. By deducing the connection between crack length and damage evolution, the resulting law of crack expansion rate is related to the strain rate. In addition, the influence of hydraulic factors on the stress intensity factor at the crack tip is introduced. Thereby, a dynamic constitutive model for deep rocks under coupled hydraulic-mechanical loading was established and then validated against the experimental results. Subsequently, the characteristics of introduced parameter for quantifying the water-induced effects were carefully discussed.

Thermal-mechanical coupled effect on fracture mechanism and plastic characteristics of sandstone

Scanning electronic microscopy (SEM) was employed to investigate fractographs of sandstone in mine roof strata under thermal-mechanical coupled effect. Based on the evolution of sandstone surface morphology in the failure process and frac- tography, the fracture mechanism was studied and classified under meso and mi- cro scales, respectively. The differences between fractographs under different tem- peratures were examined in detail. Under high temperature, fatigue fracture and plastic deformation occurred in the fracture surface. Therefore, the temperature was manifested by these phenomena to influence strongly on micro failure mechanism of sandstone. In addition, the failure mechanism would transit from brittle failure mechanism at low temperature to coupled brittle-ductile failure mechanism at high temperature. The variation of sandstone strength under differ- ent temperature can be attributed to the occurrence of plastic deformation, fatigue fracture, and microcracking. The fatigue striations in the fracture surfaces under high temperature may be interpreted as micro fold. And the coupled effect of tem- perature and tensile stress may be another formation mechanism of micro fold in geology.

Fluid-Thermal-Mechanical Coupled Analysis and Optimized Design of Printed Circuit Heat Exchanger with Airfoil Fins of S-CO_(2) Brayton Cycle

Printed Circuit Heat Exchanger(PCHE) with high-efficiency and compact structure has great application prospect in the supercritical carbon dioxide(S-CO_(2)) power systems for the next generation of high-temperature concentrated solar and advanced nuclear energy. However, the high operating temperature and pressure require PCHE to maintain good heat transfer performance, as well as reliable mechanical performance at the same time. It is necessary to carry out the fluid-thermal-mechanical coupled analysis of PCHE for the safe and efficient operation of the S-CO_(2) cycle. In this paper, a three-dimensional fluid-structure coupled numerical model was established to study the fluid-thermal-mechanical coupled characteristics of PCHE under different airfoil fin arrangements. The stress distribution of the single airfoil fin was studied, and a better airfoil arrangement that comprehensively considers heat transfer characteristics and stress distribution was obtained. Aiming at the high stress caused by the stress concentration at both ends of the airfoil fin, an optimized configuration combining straight channel and airfoil channel was proposed. The results show that the difference between the flow and heat transfer performance of the two optimized structures and the reference structure is only within 1.5%, but the maximum stresses of the two optimized structures are respectively reduced by 69.4% and 70.0% compared with that of the reference structure, which significantly reduces the stress intensity of PCHE. The result provides a new method to develop the airfoil PCHE with uniform stress distribution and good thermo-hydraulic performance.

Investigation of meso-failure behavior of rock under thermal-mechanical coupled effects based on high temperature SEM

It is extremely important to study and understand the deformation behavior and strength characteristics of rocks under thermal-mechanical （TM） coupling effects. Failure behavior and strength characteristics of Pingdingshan sandstone were investigated at room temperatures up to 300℃ in an internally heated apparatus and tensile load through meso-scale laboratory experiments in this work. 33 experiments have successfully been conducted for Pingdingshan sandstone. Experimental results indicated that the tensile strength increased slowly with temperatures from 25℃ to 100℃, and then sharply jumped from 100℃ to 150℃, and finally decreased slightly with temperatures from 150℃ to 300℃. And about 150℃ is the threshold temperature of strength and thermal cracking. At low temperatures （25℃-150℃）, sandstone strength is determined by relatively weak clay cement. However, at higher temperatures （150℃-300℃）, because of the strength enhancement of clay cement, sandstone strength is controlled by both mineral particles and clay cement. The effects of cement clay, micro-cracks closing, and thermal cracking were the possible reasons for our detailed analysis. In addition, the typical fracture position maps and nominal stress-strain curves indicated that the temperature had strong effects on the failure mechanism of sandstone. The fractograph implied that the dominant fracture mechanism tended to transform from brittle at low temperatures to ductile at high temperatures.

ANALYSIS OF SHAKEDOWN OF FG BREE PLATE SUBJECTED TO COUPLED THERMAL-MECHANICAL LOADINGS

The static and kinematic shakedown of a functionally graded （FG） Bree plate is analyzed. The plate is subjected to coupled constant mechanical load and cyclically varying temperature. The material is assumed linearly elastic and nonlinear isotropic hardening with elastic modulus,yield strength and the thermal expansion coeffcient varying exponentially through the thickness of the plate. The boundaries between the shakedown area and the areas of elasticity,incremental collapse and reversed plasticity are determined,respectively. The shakedown of the counterpart made of homogeneous material with average material properties is also analyzed. The comparison between the results obtained in the two cases exhibits distinct qualitative and quantitative difference,indicating the importance of shakedown analysis for FG structures. Since FG structures are usually used in the cases where severe coupled cyclic thermal and mechanical loadings are applied,the approach developed and the results obtained are significant for the analysis and design of such kind of structures.

A semi-analytical model for coupled flow in stress-sensitive multi-scale shale reservoirs with fractal characteristics

A large number of nanopores and complex fracture structures in shale reservoirs results in multi-scale flow of oil. With the development of shale oil reservoirs, the permeability of multi-scale media undergoes changes due to stress sensitivity, which plays a crucial role in controlling pressure propagation and oil flow. This paper proposes a multi-scale coupled flow mathematical model of matrix nanopores, induced fractures, and hydraulic fractures. In this model, the micro-scale effects of shale oil flow in fractal nanopores, fractal induced fracture network, and stress sensitivity of multi-scale media are considered. We solved the model iteratively using Pedrosa transform, semi-analytic Segmented Bessel function, Laplace transform. The results of this model exhibit good agreement with the numerical solution and field production data, confirming the high accuracy of the model. As well, the influence of stress sensitivity on permeability, pressure and production is analyzed. It is shown that the permeability and production decrease significantly when induced fractures are weakly supported. Closed induced fractures can inhibit interporosity flow in the stimulated reservoir volume (SRV). It has been shown in sensitivity analysis that hydraulic fractures are beneficial to early production, and induced fractures in SRV are beneficial to middle production. The model can characterize multi-scale flow characteristics of shale oil, providing theoretical guidance for rapid productivity evaluation.

Numerical simulation of a sheet metal extrusion process by using thermal-mechanical coupling EAS FEM

The thermal-mechanical coupling finite element method(FEM)was usedto simulate a non-isothermal sheet metal extrusion process. On thebasis of the finite plasticity consistent with multiplicativedecomposition of the deformation gradient, the enhanced as- sumedstrain(EAS)FEM was applied to carry out the numerical simulation. Inorder to make the computation reliable ad avoid hour- glass mode inthe EAS element under large compressive strains, an alterative formof the original enhanced deformation gradient was employed. Inaddition, reduced factors were used in the computation of the elementlocal internal parameters and the enhanced part of elementalstiffness.

Uncertainty quantification of mechanism motion based on coupled mechanism—motor dynamic model for ammunition delivery system

In this paper,a dynamic modeling method of motor driven electromechanical system is presented,and the uncertainty quantification of mechanism motion is investigated based on this method.The main contribution is to propose a novel mechanism-motor coupling dynamic modeling method,in which the relationship between mechanism motion and motor rotation is established according to the geometric coordination of the system.The advantages of this include establishing intuitive coupling between the mechanism and motor,facilitating the discussion for the influence of both mechanical and electrical parameters on the mechanism,and enabling dynamic simulation with controller to take the randomness of the electric load into account.Dynamic simulation considering feedback control of ammunition delivery system is carried out,and the feasibility of the model is verified experimentally.Based on probability density evolution theory,we comprehensively discuss the effects of system parameters on mechanism motion from the perspective of uncertainty quantization.Our work can not only provide guidance for engineering design of ammunition delivery mechanism,but also provide theoretical support for modeling and uncertainty quantification research of mechatronics system.

Pore-pressure and stress-coupled creep behavior in deep coal:Insights from real-time NMR analysis

Understanding the variations in microscopic pore-fracture structures(MPFS) during coal creep under pore pressure and stress coupling is crucial for coal mining and effective gas treatment. In this manuscript, a triaxial creep test on deep coal at various pore pressures using a test system that combines in-situ mechanical loading with real-time nuclear magnetic resonance(NMR) detection was conducted.Full-scale quantitative characterization, online real-time detection, and visualization of MPFS during coal creep influenced by pore pressure and stress coupling were performed using NMR and NMR imaging(NMRI) techniques. The results revealed that seepage pores and microfractures(SPM) undergo the most significant changes during coal creep, with creep failure gradually expanding from dense primary pore fractures. Pore pressure presence promotes MPFS development primarily by inhibiting SPM compression and encouraging adsorption pores(AP) to evolve into SPM. Coal enters the accelerated creep stage earlier at lower stress levels, resulting in more pronounced creep deformation. The connection between the micro and macro values was established, demonstrating that increased porosity at different pore pressures leads to a negative exponential decay of the viscosity coefficient. The Newton dashpot in the ideal viscoplastic body and the Burgers model was improved using NMR experimental results, and a creep model that considers pore pressure and stress coupling using variable-order fractional operators was developed. The model’s reasonableness was confirmed using creep experimental data. The damagestate adjustment factors ω and β were identified through a parameter sensitivity analysis to characterize the effect of pore pressure and stress coupling on the creep damage characteristics(size and degree of difficulty) of coal.

Coupled multiphysical model for investigation of influence factors in the application of microbially induced calcite precipitation

The study presents a comprehensive coupled thermo-bio-chemo-hydraulic(T-BCH)modeling framework for stabilizing soils using microbially induced calcite precipitation(MICP).The numerical model considers relevant multiphysics involved in MICP,such as bacterial ureolytic activities,biochemical reactions,multiphase and multicomponent transport,and alteration of the porosity and permeability.The model incorporates multiphysical coupling effects through well-established constitutive relations that connect parameters and variables from different physical fields.It was implemented in the open-source finite element code OpenGeoSys(OGS),and a semi-staggered solution strategy was designed to solve the couplings,allowing for flexible model settings.Therefore,the developed model can be easily adapted to simulate MICP applications in different scenarios.The numerical model was employed to analyze the effect of various factors,including temperature,injection strategies,and application scales.Besides,a TBCH modeling study was conducted on the laboratory-scale domain to analyze the effects of temperature on urease activity and precipitated calcium carbonate.To understand the scale dependency of MICP treatment,a large-scale heterogeneous domain was subjected to variable biochemical injection strategies.The simulations conducted at the field-scale guided the selection of an injection strategy to achieve the desired type and amount of precipitation.Additionally,the study emphasized the potential of numerical models as reliable tools for optimizing future developments in field-scale MICP treatment.The present study demonstrates the potential of this numerical framework for designing and optimizing the MICP applications in laboratory-,prototype-,and field-scale scenarios.

Anisotropic strength,deformation and failure of gneiss granite under high stress and temperature coupled true triaxial compression

The anisotropic mechanical behavior of rocks under high-stress and high-temperature coupled conditions is crucial for analyzing the stability of surrounding rocks in deep underground engineering.This paper is devoted to studying the anisotropic strength,deformation and failure behavior of gneiss granite from the deep boreholes of a railway tunnel that suffers from high tectonic stress and ground temperature in the eastern tectonic knot in the Tibet Plateau.High-temperature true triaxial compression tests are performed on the samples using a self-developed testing device with five different loading directions and three temperature values that are representative of the geological conditions of the deep underground tunnels in the region.Effect of temperature and loading direction on the strength,elastic modulus,Poisson’s ratio,and failure mode are analyzed.The method for quantitative identification of anisotropic failure is also proposed.The anisotropic mechanical behaviors of the gneiss granite are very sensitive to the changes in loading direction and temperature under true triaxial compression,and the high temperature seems to weaken the inherent anisotropy and stress-induced deformation anisotropy.The strength and deformation show obvious thermal degradation at 200℃due to the weakening of friction between failure surfaces and the transition of the failure pattern in rock grains.In the range of 25℃ 200℃,the failure is mainly governed by the loading direction due to the inherent anisotropy.This study is helpful to the in-depth understanding of the thermal-mechanical behavior of anisotropic rocks in deep underground projects.

Nonlinearly induced entanglement in dissipatively coupled optomechanical system

Nonlinearly induced steady-state photon–phonon entanglement of a dissipative coupled system is studied in the bistable regime. Quantum dynamical characteristics are analysed by solving the mean-field and fluctuation equations of the system. It is shown that dissipative coupling can induce bistable behaviour for the effective dissipation of the system.Under suitable parameters, one of the steady states significantly reduces the dissipative effect of the system. Consequently,a larger steady-state entanglement can be achieved compared to linear dynamics. Furthermore, the experimental feasibility of the parameters is analysed. Our results provide a new perspective for the implementation of steady-state optomechanical entanglement.

Seismic performance evaluation of hybrid coupled shear wall system with shear and flexural fuse-type steel coupling beams

Replaceable flexural and shear fuse-type coupling beams are used in hybrid coupled shear wall(HCSW)systems,enabling concrete buildings to be promptly recovered after severe earthquakes.This study aimed to analytically evaluate the seismic behavior of flexural and shear fuse beams situated in short-,medium-and high-rise RC buildings that have HCSWs.Three building groups hypothetically located in a high seismic hazard zone were studied.A series of 2D nonlinear time history analyses was accomplished in OpenSees,using the ground motion records scaled at the design basis earthquake level.It was found that the effectiveness of fuses in HCSWs depends on various factors such as size and scale of the building,allowable rotation value,inter-story drift ratio,residual drift quantity,energy dissipation value of the fuses,etc.The results show that shear fuses better meet the requirements of rotations and drifts.In contrast,flexural fuses dissipate more energy,but their sectional stiffness should increase to meet other requirements.It was concluded that adoption of proper fuses depends on the overall scale of the building and on how associated factors are considered.

Effects of asymmetric coupling and boundary on the dynamic behaviors of a random nearest neighbor coupled system

This study investigates the dynamical behaviors of nearest neighbor asymmetric coupled systems in a confined space.First, the study derivative analytical stability and synchronization conditions for the asymmetrically coupled system in an unconfined space, which are then validated through numerical simulations. Simulation results show that asymmetric coupling has a significant impact on synchronization conditions. Moreover, it is observed that irrespective of whether the system is confined, an increase in coupling asymmetry leads to a hastened synchronization pace. Additionally, the study examines the effects of boundaries on the system's collective behaviors via numerical experiments. The presence of boundaries ensures the system's stability and synchronization, and reducing these boundaries can expedite the synchronization process and amplify its effects. Finally, the study reveals that the system's output amplitude exhibits stochastic resonance as the confined boundary size increases.

Customized modulation on plasma uniformity by non-uniform magnetic field in capacitively coupled plasma

A two-dimensional fluid model based on COMSOL Multiphysics is developed to investigate the modulation of static magnetic field on plasma homogeneity in a capacitively coupled plasma(CCP)chamber. To generate a static magnetic field, direct current is applied to a circular coil located at the top of the chamber. By adjusting the magnetic field's configuration, which is done by altering the coil current and position, both the plasma uniformity and density can be significantly modulated. In the absence of the magnetic field, the plasma density exhibits an inhomogeneous distribution characterized by higher values at the plasma edge and lower values at the center. The introduction of a magnetic field generated by coils results in a significant increase in electron density near the coils. Furthermore, an increase in the sets of coils improves the uniformity of the plasma. By flexibly adjusting the positions of the coils and the applied current,a substantial enhancement in overall uniformity can be achieved. These findings demonstrate the feasibility of using this method for achieving uniform plasma densities in industrial applications.