The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibi...The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibilizers with different content of residual maleic anhydride (MAH). It was shown that PP-g-MAH compatibilizer could significantly improve the mechanical properties of RGF-PP, while from thermal and morphological analysis results, the content of residual MAH had negative influence on long term thermo- oxidative aging properties of RGF-PP with adding PP-g-MAH compatibilizer;the lower the residual content of MAH is, the better the thermo stability of the PP-g-MAH is, and also the better the thermo-oxidative aging properties was obtained.展开更多
BaFeO_(3-δ)-derived perovskites are promising cathodes for intermediate temperature solid oxide fuel cells.The activity of these perovskites depends on the number of oxygen vacancies in their lattice,which can be tun...BaFeO_(3-δ)-derived perovskites are promising cathodes for intermediate temperature solid oxide fuel cells.The activity of these perovskites depends on the number of oxygen vacancies in their lattice,which can be tuned by cationic substitution.Our first-principle calculations show that Ag is a promising substitute for the Fe site,resulting in a reduced oxygen vacancy formation energy compared with the pristine BaFeO_(3-δ).Ag has limited solubility in perovskites,and its introduction generates an Ag metal secondary phase,which influences the cathode performances.In this work,we investigate the matter,using a Ba0:9La0:1Fe_(1-x)AgxO_(3-δ)series of materials as a case study.Acknowledging the limited solubility of Ag in Ba0:9La0:1Fe_(1-x)AgxO_(3-δ),we aim to distinguish the effects of Ag substitution from those of the Ag secondary phase.We observed that Ag substitution increases the number of oxygen vacancies,confirming our calculations,and facilitates the oxygen incorporation.However,Ag substitution lowers the number of holes,in this way reducing the electronic p-type conductivity.On the other hand,Ag metal positively affects the electronic conductivity and helps the redistribution of the electronic charge at the cathode-electrolyte interface.展开更多
Aging of a solid composite propellant containing HTPB/AP/AL was performed in order to validate the conformance of the accelerated aging data to the Arrhenius law. The main objective of the work was to examine the infl...Aging of a solid composite propellant containing HTPB/AP/AL was performed in order to validate the conformance of the accelerated aging data to the Arrhenius law. The main objective of the work was to examine the influence of the aziridine bonding agents family on the propellant aging. Aging of the prepared propellant samples was conducted as follows: 1. Four samples, one free of bonding agents, and three containing aziridine based bonding agents MAPO,HX-752, MAT4 were aged at 65°C. 2. Another four samples based on HX-752, MAT4 with different curing agents were aged at 65°C. The measured mechanical properties of the free bonding agent propellant samples were very far from the specifications and this illustrates the importance of the bonding agents in both the preparation and the aging phases.The prepared bonding agent 'MAT4' gave remarkable improvements of the mechanical properties comparing with HX-752 and MAPO. The aziridine bonding agents family inhibited the rate of decomposition of the propellant during the aging periods and supported the propellant matrix against decomposition at the elevate temperatures. Using of HMDI as curing agent gave slight better mechanical properties to the IPDI.展开更多
Cerium oxide/silicon rubber was prepared via mechanical blending.Mechanical and frictional properties,as well as thermal stability after thermo-oxidative ageing were investigated in this rubber composite.3D surface pr...Cerium oxide/silicon rubber was prepared via mechanical blending.Mechanical and frictional properties,as well as thermal stability after thermo-oxidative ageing were investigated in this rubber composite.3D surface profilometry,scanning electron microscopy(SEM)and thermogravimetry analysis(TGA)were used to study the friction surface characteristics,friction mechanism and thermal stability,respectively.Additionally,swelling experiments were carried out to investigate the variation of crosslinking density.After thermo-oxidative ageing,the tear strength of cerium oxide/silicon rubber decreases.However,in the early ageing stage,improvements in tensile strength,elongation at break,and frictional performance are caused by crosslinking density increments.Moreover,the addition of cerium oxide remarkably improves the re-cross linking degree during ageing process,which in turn decreases the number of holes on the friction surface and endows the silicon rubber with better mechanical and frictional properties,as well as thermo-oxidative ageing resistance.展开更多
文摘The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibilizers with different content of residual maleic anhydride (MAH). It was shown that PP-g-MAH compatibilizer could significantly improve the mechanical properties of RGF-PP, while from thermal and morphological analysis results, the content of residual MAH had negative influence on long term thermo- oxidative aging properties of RGF-PP with adding PP-g-MAH compatibilizer;the lower the residual content of MAH is, the better the thermo stability of the PP-g-MAH is, and also the better the thermo-oxidative aging properties was obtained.
基金The authors gratefully acknowledge the Research Grant Council of Hong Kong for support through the projects 16201820,and 16206019.
文摘BaFeO_(3-δ)-derived perovskites are promising cathodes for intermediate temperature solid oxide fuel cells.The activity of these perovskites depends on the number of oxygen vacancies in their lattice,which can be tuned by cationic substitution.Our first-principle calculations show that Ag is a promising substitute for the Fe site,resulting in a reduced oxygen vacancy formation energy compared with the pristine BaFeO_(3-δ).Ag has limited solubility in perovskites,and its introduction generates an Ag metal secondary phase,which influences the cathode performances.In this work,we investigate the matter,using a Ba0:9La0:1Fe_(1-x)AgxO_(3-δ)series of materials as a case study.Acknowledging the limited solubility of Ag in Ba0:9La0:1Fe_(1-x)AgxO_(3-δ),we aim to distinguish the effects of Ag substitution from those of the Ag secondary phase.We observed that Ag substitution increases the number of oxygen vacancies,confirming our calculations,and facilitates the oxygen incorporation.However,Ag substitution lowers the number of holes,in this way reducing the electronic p-type conductivity.On the other hand,Ag metal positively affects the electronic conductivity and helps the redistribution of the electronic charge at the cathode-electrolyte interface.
文摘Aging of a solid composite propellant containing HTPB/AP/AL was performed in order to validate the conformance of the accelerated aging data to the Arrhenius law. The main objective of the work was to examine the influence of the aziridine bonding agents family on the propellant aging. Aging of the prepared propellant samples was conducted as follows: 1. Four samples, one free of bonding agents, and three containing aziridine based bonding agents MAPO,HX-752, MAT4 were aged at 65°C. 2. Another four samples based on HX-752, MAT4 with different curing agents were aged at 65°C. The measured mechanical properties of the free bonding agent propellant samples were very far from the specifications and this illustrates the importance of the bonding agents in both the preparation and the aging phases.The prepared bonding agent 'MAT4' gave remarkable improvements of the mechanical properties comparing with HX-752 and MAPO. The aziridine bonding agents family inhibited the rate of decomposition of the propellant during the aging periods and supported the propellant matrix against decomposition at the elevate temperatures. Using of HMDI as curing agent gave slight better mechanical properties to the IPDI.
基金Project supported by the Development Plan for Academics in Huanshui,the Natural Science Foundation of the Henan Province(182300410169,182102210201)the Support Project of Scientific and Technological Innovation Talents of Universities in Henan Province(19HASTIT023).
文摘Cerium oxide/silicon rubber was prepared via mechanical blending.Mechanical and frictional properties,as well as thermal stability after thermo-oxidative ageing were investigated in this rubber composite.3D surface profilometry,scanning electron microscopy(SEM)and thermogravimetry analysis(TGA)were used to study the friction surface characteristics,friction mechanism and thermal stability,respectively.Additionally,swelling experiments were carried out to investigate the variation of crosslinking density.After thermo-oxidative ageing,the tear strength of cerium oxide/silicon rubber decreases.However,in the early ageing stage,improvements in tensile strength,elongation at break,and frictional performance are caused by crosslinking density increments.Moreover,the addition of cerium oxide remarkably improves the re-cross linking degree during ageing process,which in turn decreases the number of holes on the friction surface and endows the silicon rubber with better mechanical and frictional properties,as well as thermo-oxidative ageing resistance.
