Thermo-sensitive polymer nanospheres as a smart plugging agent for shale gas drilling operations

Emulsifier-free poly（methyl methacrylate-styrene） [P（MMA-St）] nanospheres with an average particle size of 100 nm were synthesized in an isopropyl alcoholwater medium by a solvothermal method. Then, through radical graft copolymerization of thermo-sensitive mono- mer N-isopropylacrylamide （NIPAm） and hydrophilic monomer acrylic acid （AA） onto the surface of P（MMA- St） nanospheres at 80 ℃, a series of thermo-sensitive polymer nanospheres, named SD-SEAL with different lower critical solution temperatures （LCST）, were prepared by adjusting the mole ratio of NIPAm to AA. The products were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, particle size distribution, and specific surface area analysis. The temperature-sensitive behavior was studied by light transmittance tests, while the sealing performance was investigated by pressure transmission tests with Lungmachi Formation shales. The experimental results showed that the synthesized nanoparticles are sensitive to temperature and had apparent LCST values which increased with an increase in hydrophilic monomer AA. When the temperature was higher than its LCST value, SD- SEAL played a dual role of physical plugging and chemical inhibition, slowed down pressure transmission, and reduced shale permeability remarkably. The plugged layer of shale was changed to being hydrophobic, which greatly improved the shale stability

Plant Temperature and Its Simulation Model of Thermo-Sensitive Genic Male Sterile Rice

Plant temperature （Tp） and its relations to the microclimate of rice colony and irrigation water were studied using a thermo-sensitive genic male sterile （TGMS） rice line, Pei＇ai 64S. Significant differences in the daily change of temperature were detected between Tp and air temperature at the height of 150 cm （TA）. From 8：00 to 20：00, Tp was lower than TA, but they were similar during 21：00 to next 7：00. The maximum Tp occurred one hour earlier than the maximum TA, though they both reached the minimum at 6：00. Tp fluctuated less than TA. At the same height, during 6：00-13：00, Tp was higher than air temperature （Ta）, and Tp reached the maximum one hour earlier than Ta. During the rest time on sunny day, Tp was close to or even a little lower than Ta. On overcast day, Tp was higher than Ta in the whole day, and both maximized at the same time. In addition, Tp was regulated by solar radiation, cloudage and wind speed in daytime, and by irrigation water at night. The present study indicated that a TA of 29.6℃ was the critical point, at which Tp was increased or decreased by irrigation water. Tp and the difference between water and air temperatures showed a conic relation. Tp fluctuation was also regulated by the absorption or reflection of solar radiation by leaves during daytime and release of heat energy during nighttime. By analysis on correlation and regression simulation, two models of Tp were established.

Mechanism of Sterility and Breeding Strategies for Photoperiod/Thermo-Sensitive Genic Male Sterile Rice

To understand the male sterility mechanism of photoperiod/thermo-sensitive genic male sterile [P（T）GMS] lines in rice, the research progress on genetics of photoperiod and/or temperature sensitive genic male sterility in rice was reviewed. A new idea was proposed to explain the sterility mechanism of P（T）GMS rice. The fertility transition from sterile to fertile is the result of cooperative regulation of major-effect sterile genes with photoperiod and/or temperature sensitive genes, but not the so-called pgms gene in P（T）GMS rice. The minor-effect genes, which exhibit accumulative effect on sterility, are the important factors for the critical temperature of sterility transition. The more minor-effect genes the sterile line holds, the lower the critical temperature of sterility transition is. The critical temperature of sterility transition will be invariable if all the minor-effect genes are homozygous. The strategies for breeding P（T）GMS rice were also proposed. The selective indices of critical photoperiod and temperature for sterility transition should be set according to varietal type and ecological region. Imposing selection pressure is a key technology for breeding P（T）GMS rice with lower critical temperature for sterility, and improving the comprehensive performance of the whole traits and combining ability is vital for breeding P（T）GMS rice lines.

Molecular Markers and Candidate Genes for Thermo-Sensitive Genic Male Sterile in Rice

The discovery of thermo-sensitive genic male sterility(TGMS) has led to development of a simple and highly efficient two-line breeding system. In this study, genetic analysis was conducted using three F_2 populations derived from crosses between IR68301 S, an indica TGMS rice line, and IR14632(tropical japonica), Supanburi 91062(indica) and IR67966-188-2-2-1(tropical japonica), respectively.Approximately 1:3 ratio between sterile and normal pollen of F_2 plants from the three populations revealed that TGMS is controlled by a single recessive gene. Bulked segregant analysis using simple sequence repeat(SSR) and insertion-deletion(InDel) markers were used to identify markers linked to the tms gene. The linkage analysis based on the three populations indicated that the tms locus was located on chromosome 2 covering the same area. Using IR68301S × IR14632 F_2 population, the results showed that the tms locus was located between SSR marker RM12676 and InDel marker 2gAP0050058. The genetic distance from the tms gene to these two flanking markers were 1.10 and 0.82 cM, respectively.InDel marker 2gAP004045 located between these two markers showed complete co-segregation with the TGMS phenotype. In addition, InDel marker vf0206114052 showed 2.94 cM linked to the tms gene using F_2 populations of IR68301S × Supanburi 91062. These markers are useful tool for developing new TGMS lines by marker-assisted selection. There were ten genes located between the two flanking markers RM12676 and 2gAP0050058. Using quantitative real-time PCR for expression analysis, 7 of the 10 genes showed expression in panicles, and response to temperatures. These genes could be the candidate gene controlling TGMS in IR68301S.

Genetic Analysis and Mapping of a Thermo-sensitive White Stripe-Leaf Mutant at Seedling Stage in Rice(Oryza sativa)

A thermo-sensitive white stripe-leaf mutant （tws） was selected from the M2 progeny of a japonica variety, Jiahua 1, treated by ^60 Co γ-radiation. In comparison with the wild type parent, the mutant displayed a phenotype of white stripe on the 3rd and 4th leaves, but began to turn normal green on the 5th leaf when grown at low temperatures （20℃ and 24℃）. Furthermore, the content of total chlorophyll showed an obvious decrease in the leaves with white stripe. These results suggest that the expression of the mutant trait was thermo-sensitive and correlated with the leaf age of seedlings. The genetic analysis indicated that the mutant trait was controlled by a single recessive nuclear gene, designated as tws. In addition, by using SSR markers and an F2 segregating population derived from the cross between the tws mutant and 9311, tws was mapped between the markers MM3907 and MM3928 with a physical distance of 86 kb on dce chromosome 4.

Improving Blast Resistance of a Thermo-Sensitive Genic Male Sterile Rice Line GD-8S by Molecular Marker-Assisted Selection

The broad-spectrum blast resistance gene Pi-1, from donor line BL122, was introduced into a thermo-sensitive genic male sterile rice line GD-8S, which possessed good grain quality but high susceptibility to rice blast, by using backcross breeding and molecular marker-assisted selection. Five elite improved male sterile lines, RGD8S-1, RGD8S-2, RGD8S-3, RGD8S-4 and RGD8S-5, were selected based on the results of molecular marker analysis, spikelet sterility, recovery rate of genetic background and agronomic traits. Thirty-three representative blast isolates collected from Guangdong Province, China were used to inoculate the improved lines and the original line GD-8S artificially. The resistance frequencies of the improved lines ranged from 76.47% to 100%, much higher than that of the original line GD-8S （9.09%）. On the agronomic characters, there were no significant differences between the improved lines and GD-8S except for flag leaf length and panicle number per plant. The improved lines could be used for breeding hybrid rice with high blast resistance.

A bull-heading water control technique of thermo-sensitive temporary plugging agent

Aimed at the disadvantages of secondary damage to oil layers caused by the conventional bull-heading water control technique, a thermo-sensitive temporary plugging agent for water control was synthesized by water solution polymerization and applied in the field with a new secondary temporary plugging technique. The optimization and performance evaluation of thermo-sensitive temporary plugging agent were carried out through laboratory experiments. The optimized formula is as follows:(6%-8%) acrylamide +(0.08%-0.12%) ammonium persulfate +(1.5%-2.0%) sepiolite +(0.5%-0.8%) polyethylene glycol diacrylate. The thermo-sensitive temporary plugging agent is suitable for formation temperatures of 70-90 ?C, it has high temporary plugging strength(5-40 k Pa), controllable degradation time(1-15 d), the apparent viscosity after degradation of less than 100 m Pa?S and the permeability recovery value of simulated cores of more than 95%. Based on the research results, secondary temporary plugging technique was used in a horizontal well in the Jidong Oilfield. After treatment, the well saw a drop of water cut to 27%, and now it has a water cut of 67%, its daily increased oil production was 4.8 t, and the cumulative oil increment was 750 t, demonstrating that the technique worked well in controlling water production and increasing oil production.

A Molecular Thermodynamic Model for Restricted Swelling Behaviors of Thermo-sensitive Hydrogel

A molecular thermodynamic model was developed for describing the restricted swelling behavior of a thermosensitive hydrogel confined in a limited space. The Gibbs free energy includes two contributions, the contribution of mixing of polymer and solvent calculated by using the lattice model of random polymer solution, and the contribution due to the elasticity of polymer network. This model can accurately describe the swelling behavior of restricted hydrogels under uniaxial and biaxial constraints by using two model parameters. One is the interaction energy parameter between polymer network and solvent, and the other is the size parameter depending on the degree of cross-linking. The calculated results show that the swelling ratio reduces significantly and the phase transition temperature decreases slightly as the restricted degree increases, which agree well with the experimental data.

Factors Influencing the Outcrossed Seed-Setting Obstacles of Photo-thermo Sensitive Genie Male Sterile Rice

Using photo-thermo sensitive genie male rice (PTGMS) Pei' ai 64S, W7415S, W6154S, N26S, Annong S, Nongken 58S, 7001S and 5088S as female parents and conventional indica lines 8258 and U89 as male parents, the factors affecting outcrossed seed-setting were analyzed. The PTGMS had obstacles in outcrossed seed setting influenced by inheritance and environment at varying degrees. Environmental temperature was regarded as the main factor that resulted in the outcrossed seed-setting obstacles. The sensitive stage was at the early stage of grain filling for outcrossed seed setting. There existed remarkable differences at the sensitivity stage, the duration of sensitive period, the sensitive level and the effective level of outcrossed seed-setting obstacles caused by environmental temperature among different PTGMS lines. Therefore, attention should be paid to outcrossed seed-setting obstacles in selection and utilization of PTGMS lines.

Elongation of the Uppermost Internode for Changxuan 3S,a Thermo-Sensitive Genic Male Sterile Rice Line

Changxuan 3S, a thermo-sensitive genic male sterile （TGMS） rice line with eui gene, is derived from the TGMS rice line Pei＇ai 64S by irradiation with 350 Gy of ^60Co γ-ray. To elucidate the uppermost internode elongation of the TGMS line with eui gene, Changxuan 3S and its parent Pei＇ai 64S were used to study the effects of temperature on panicle exsertion. At 24℃, the uppermost internode of Changxuan 3S elongated the fastest from the 4^th day before flowering to 0 day （flowering）, being 2.1-fold as that of Pei＇ai 64S, whereas it elongated slowly during the 12^th day to the 4^th day before flowering and the 1^st to the 3^rd day after flowering. The uppermost internode of Changxuan 3S exserted from the flag leaf sheath at 22℃, 24℃ and 26℃, and the length of elongated uppermost internode increased with the decreasing temperatures. At 28℃, though the panicles of Changxuan 3S were still enclosed in the leaf sheath, the degree of panicle enclosure was significantly lower compared with Pei＇ai 64S. Cytological studies on Changxuan 3S showed that the uppermost internode elongation was attributed to the increase of cell number and cell elongation, and the latter was more significant. Moreover, the numbers of outermost and innermost parenchyma cells and the cell length of the uppermost internode reduced with the increasing temperatures.

Introgression of Gene for Non-Pollen Type Thermo-Sensitive Genic Male Sterility to Thai Rice Cultivars

For the two-line hybrid rice system, pol en sterility is regulated by recessive gene that responds to temperature. The recessive gene controlling thermo-sensitive genetic male sterility （TGMS） is expressed when the plants are grown in conditions with higher or lower critical temperatures. To transfer tgms gene（s） control ing TGMS to Thai rice cultivars by backcross breeding method, a male sterile line was used as a donor parent while Thai rice cultivars ChaiNat 1, PathumThani 1, and SuphanBuri 1 were used as recurrent parents. The BC2F2 lines were developed from backcrossing and selfing. Moreover, the simple sequence repeat （SSR） markers were developed for identifying tgms gene and the linked marker was used for assisting selection in backcrossing. The identification lines were confirmed by pol en observation. The results showed the success of introgression of the tgms gene into Thai rice cultivars. These lines will be tested for combining ability and used as female parent in hybrid rice production in Thailand.

Inheritance of the Male Sterility in a New Photo/Thermo-Sensitive Genie Male Sterile Line B06S of Rice

The major male sterile genes in a new photo/thermo-sensitive genie male sterile (PTGMS) line B06S of rice were analyzed by the manipulation of mixture distribution theory. The results indicated that a pair of major male sterile nuclear genes with large effects were responsible for controlling the male sterility of B06S.

Study on the Pollen Thermo-Sensitive and Stigma Exsertion Male Sterile Line Tomato (Lycopersicon esculentum Mill.) cv. Da107

To accelerate the breeding process, male sterile line is used to leave out the troublesome procedures of the artificial emasculation in tomato breeding. However, the fertility of the pollen thermo-sensitivity male sterile line (PTMSL) and the stigma exsertion male sterile line (SEMSL) are affected easily by the environments when used alone. The trial materials were Da107 and the control was First. This study was conducted to create a new male sterile line of tomato characterized by pollen thermo-sensitivity and long style by genic recombination through the hybridizing of the PTMSL and SEMSL. Research on the statistics of the pollen germination rate, the contamination rate in F1 and the flower organics indicated that Da107 was an ideal TS and SE male sterile line with the sterility of 95%, as well as it also could be used as fertile line at low temperature. Meanwhile, the results showed that hybrid-seed contamination risk with selfed seeds from residual fertility in Da107 was low.

Effect of day length and temperature on the pollen fertility in photo(thermo)-sensitive genic male-sterile rice

The effect of day length and temperature on the pollen fertility of five photoperiod-sensitive genic male-sterile japonica rice lines (PGMSR) and three temperature-sensitive genic malesterile indica rice lines (TGMSR) were investigated in phytotron. The light source used for illumination was xenon lamp, and the light intensity which plant accepted on the leaf surface was 300—350μmol photons ms. The results indicated that pollens of PGMSR 7001S and E47S aborted completely whereas a little part of 31116S pollens appeared normal under long day photoperiod (LD,25℃,15h) (Table 1). High temperature (HT, 30℃, 12h) and lower temperature (LT,

Pore-scale study of the pressure-sensitive effect of sandstone and its influence on multiphase flows

The pressure-sensitive effect on the pore structure of sandstone was investigated using X-ray computed micro-tomography and QEMSCAN quantitative mineral analysis. In a physical simulation study, we extracted the pore network model from digital cores at different confining pressures and evaluated the effect of pressure sensitivity on the multiphase displacement process. In both the pore network model and QEMSCAN scanning, the pore structure was observed to be damaged under a high confining pressure. Due to their different scales, the pores and throats exhibited inhomogeneous changes; further, the throats exhibited a significant variation compared to that exhibited by the pores. Meanwhile, the heterogeneity of the pore structure under the two aforementioned activities was aggravated by the elastic-plastic deformation of the pore structure.The pressure-sensitive effect increased the proportion of mineral particles, such as quartz(the main component of the core skeleton), and reduced the proportion of clay minerals. The clay minerals were originally attached to the pore walls or interspersed in the pores; however, as the pressure increased, the clay minerals accumulated in the pores resulting in blockage of the pores. While simulating the multiphase displacement process, increasing the confining pressure was observed to severely restrict the flowability of oil and water. This study promises to improve the efficiency of reservoir development in terms of oil and gas exploitation.

温度敏感Thermo-TRP通道结合人体生理指标在室内热环境营造中的应用探索

营造舒适健康室内热环境,提升建筑环境品质,满足人们对美好生活的追求,同时尽可能实现建筑节能减碳,是建筑绿色低碳发展的必然要求。如何确定室内热环境舒适区间,保障人员健康安全的室内热环境如何设计,由于传统热环境设计和舒适评价主要依靠主观问卷,缺少科学量化的回答,尤其是一直欠缺对人体热舒适和人员热健康的客观度量。笔者及其课题组从建筑室内热环境绿色营造的工程问题出发,通过选择表征人体热舒适敏感的生理指标,实现人体热舒适从主观评价到科学度量的根本转变,解决了人体热舒适客观度量的科学问题;进而引入分子生物学研究手段和生化指标测量,探索了温度敏感瞬时受体通道Thermo-TRP(thermal sensitive transient receptor potential)在不同温度暴露下的激活和响应特性,确定了人体舒适温度区间和健康安全阈值。人体生理热调节是营造室内舒适健康热环境的基础,而分子生物学从微观层面揭示机体调节机理,两者的有机结合可以弥补建筑环境中对人体热舒适机理认识不足和热环境参数设计健康安全阈值不明确的不足,为建筑环境领域引入学科交叉研究方法、应用基础科学成果解决实际工程问题提供新的研究思路和案例示范。

Multi-objective Topology Optimization of Thermo-mechanical Compliant Mechanisms

The material characteristics of a structure will change with temperature variation,and will induce stress within the structure.Currently,the optimal design for the topology of compliant mechanisms is mainly performed in single physical field.However,when compliant mechanisms work in high temperature environments,their displacement outputs are generated not only by mechanical load,but also by the temperature variation which may become the prominent factor.Therefore,the influence of temperature must be considered in the design.In this paper,a novel optimization method for multi-objective topology of thermo-mechanical compliant mechanisms is presented.First,the thermal field is analyzed with finite-element method,where the thermal strain is taken into account in the constitutive relation,and the equivalent nodal thermal load is derived with the principle of virtual work.Then the thermal load is converted into physical loads in elastic field,and the control equation of the thermo-mechanical compliant mechanism is obtained.Second,the mathematical model of the multi-objective topology optimization is built by incorporating both the flexibility and stiffness.Meanwhile,the coupling sensitivity function and the sensitivity analysis equations of thermal steady-state response are derived.Finally,optimality criteria algorithm is employed to obtain numerical solution of the multi-objective topology optimization.Numerical examples show that the compliant mechanisms have better performance and are more applicable if the temperature effect is taken into account in the design process.The presented modeling and analysis methods provide a new idea and an effective approach to topology optimization of compliant mechanisms in electrothermic coupling field and multiphysics fields.

STUDY OF TOPOLOGY OPTIMIZATION FOR THERMO-STRUCTURAL COUPLING FIELD

A number of critical problems of topology optimization concerning the thermostructural coupling field axe studied at length. The governing equations and topology optimization model for the thermal-structural coupling field axe derived, with an adjoint method for sensitivity analysis of the thermo-structural coupling field proposed. The optimization algorithm for coupling field topology optimization is investigated and a flowchart of coupling field topology optimization presented. The theory and algorithms axe implemented and verified by two numerical examples.

Thermoreversible Thickening and Self-assembly Behaviors of pH/Temperature Dually Responsive Microgels with Interpenetrating Polymer Network Structure

The pH /temperature dually responsive microgels of interpenetrating polymer network( IPN) structure composed of poly( N-isopropylacrylamide)( PNIPAM) network and poly( acrylic acid)( PAA) network( PNIPAM /PAA IPN microgels) were synthesized by seed emulsion polymerization. The results obtained by dynamic laser light scattering( DLLS) show that the microgels have good pH /temperature dual sensitivities. The temperature sensitive component and the pH sensitive component inside the microgels have little interference with each other. The rheological properties of the concentrated PNIPAM /PAA IPN microgel dispersions as a function of temperature at pH 4. 0 or 7. 0 were investigated by viscometer,and the results displayed that only at pH 7. 0 the dispersions presented thermoreversible thickening behavior. Then the PNIPAM /PAA fibers were prepared by self-assembly of the PNIPAM /PAA IPN microgels in the ice-crystal templates formed by unidirectional liquid nitrogen freezing method. Field emission scanning electron microscopy( FESEM) images indicate that the PNIPAM /PAA fibers are rounded,randomly orientated and interweaved.

A SUPER SENSITIVITY MINICYCLOTRON MASS SPECTROMETER SPECIALIZED FOR CARBON-14 DATING

The structure consideration of a minicyclotron as super- sensitivity mass spectrometer for carbon -14 dating being constructed at this Institute is described. Some new design ideas and techniques are presented.