The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibi...The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibilizers with different content of residual maleic anhydride (MAH). It was shown that PP-g-MAH compatibilizer could significantly improve the mechanical properties of RGF-PP, while from thermal and morphological analysis results, the content of residual MAH had negative influence on long term thermo- oxidative aging properties of RGF-PP with adding PP-g-MAH compatibilizer;the lower the residual content of MAH is, the better the thermo stability of the PP-g-MAH is, and also the better the thermo-oxidative aging properties was obtained.展开更多
The monodisperse Au@Ag bimetallic nanorod is encapsulated by crosslinked poly( N-isopropylacrylamide)( PNIPAM) to produce thermo-responsive composite microgel with well-defined core-shell structure( Au@ Ag NR@ PNIPAM ...The monodisperse Au@Ag bimetallic nanorod is encapsulated by crosslinked poly( N-isopropylacrylamide)( PNIPAM) to produce thermo-responsive composite microgel with well-defined core-shell structure( Au@ Ag NR@ PNIPAM microgel)by seed-precipitation polymerization method using butenoic acid modified Au @ Ag NRs as seeds. When the temperature of the aqueous medium increases from 20℃ to 50℃,the localized surface plasmon resonance( LSPR) band of the entrapped Au @ Ag NR is pronouncedly red-shifted because of the decreased spatial distances between them as a result of shrinkage of the microgels,leading to their plasmonic coupling. The temperature tunable plasmonic coupling is demonstrated by temperature dependence of the surface enhanced Raman spectroscopy( SERS) signal of 1-naphthol in aqueous solution. Different from static plasmonic coupling modes from nanostructured assembly or array system of noble metals,the proposed plasmonic coupling can be dynamically controlled by environmental temperature. Therefore, the thermo responsive hybrid microgels have potential applications in mobile LSPR or SERS microsensors for living tissues or cells.展开更多
Cerium oxide/silicon rubber was prepared via mechanical blending.Mechanical and frictional properties,as well as thermal stability after thermo-oxidative ageing were investigated in this rubber composite.3D surface pr...Cerium oxide/silicon rubber was prepared via mechanical blending.Mechanical and frictional properties,as well as thermal stability after thermo-oxidative ageing were investigated in this rubber composite.3D surface profilometry,scanning electron microscopy(SEM)and thermogravimetry analysis(TGA)were used to study the friction surface characteristics,friction mechanism and thermal stability,respectively.Additionally,swelling experiments were carried out to investigate the variation of crosslinking density.After thermo-oxidative ageing,the tear strength of cerium oxide/silicon rubber decreases.However,in the early ageing stage,improvements in tensile strength,elongation at break,and frictional performance are caused by crosslinking density increments.Moreover,the addition of cerium oxide remarkably improves the re-cross linking degree during ageing process,which in turn decreases the number of holes on the friction surface and endows the silicon rubber with better mechanical and frictional properties,as well as thermo-oxidative ageing resistance.展开更多
Systematic physical simulation of thermo-mechanical processing routes has been ap-plied on a Gleeble 1500 simulator to four copper alloys (mass %) Cu-0.57Co-0.32Si,Cu-0.55Cr-0.065P, Cu-0.22Zr-0.035Si and Cu-1.01Ni-0.4...Systematic physical simulation of thermo-mechanical processing routes has been ap-plied on a Gleeble 1500 simulator to four copper alloys (mass %) Cu-0.57Co-0.32Si,Cu-0.55Cr-0.065P, Cu-0.22Zr-0.035Si and Cu-1.01Ni-0.43Si aimed at clarifying theinfluences of processing conditions on their final properties, strength and electricalconductivity. Flow curves were determined over wide temperature and strain rateranges. Hardness was used as a measure of the strength level achieved. High hard-ness was obtained as using equal amounts (strains 0.5) of cold deformation beforeand after the precipitation annealing stage. The maximum values achieved for theCu-Co-Si, Cu-Cr-P, Cu-Zr-Si and Cu-Ni-Si alloys were 190, 165, 178 and 193 HV5,respectively. A thermo-mechanical schedule involving the hot deformation-ageing-colddeformation stages showed even better results for the Cu-Zr-Si alloy. Consequently,the processing routes were designed based on simulation test results and wires of 5 and2mm in diameters have been successfully processed in the industrial scale.展开更多
The influence of thermo cycle times under variant loads and environment temperatures on the properties of Cu-16.4Zn-4Al (Re) SMA component was studied by thermostability experiments on Cu-16.4Zn-4Al SMA with the compo...The influence of thermo cycle times under variant loads and environment temperatures on the properties of Cu-16.4Zn-4Al (Re) SMA component was studied by thermostability experiments on Cu-16.4Zn-4Al SMA with the composition containing corium Re. Tangent rule was applied to determine the transformation temperature from displacement-temperature loop plot by computer in each thermal-cold cycle. The results is as follows the transformation temperature increases and shape memory property decrease with increasing load, which leads the action temperature of component to be abnormal, and the memory property decreases after overheating aging, and the memory property decreases with increasing cycle times, while the decreasing is not obvious and the recovery ratio is higher than 90% in one thousand times. It is due to the addition of corium Re which has the function of grain refinement. Therefore, it is necessary to avoid overloading and overheating in the application of such component. Thus, a kind of thermo valve that works at normal pressure and in the water as working substance was designed to replace complicate original electromechanical system.展开更多
文摘The mechanical, morphological and thermo-oxidative aging properties of the glass fiber reinforced polypropylene (RGF-PP) were studied based on four different maleic anhydride grafted polypropylene (PP-g-MAH) compatibilizers with different content of residual maleic anhydride (MAH). It was shown that PP-g-MAH compatibilizer could significantly improve the mechanical properties of RGF-PP, while from thermal and morphological analysis results, the content of residual MAH had negative influence on long term thermo- oxidative aging properties of RGF-PP with adding PP-g-MAH compatibilizer;the lower the residual content of MAH is, the better the thermo stability of the PP-g-MAH is, and also the better the thermo-oxidative aging properties was obtained.
基金National Natural Science Foundation of China(No.51373030)Chinese Universities Scientific Fund(No.CUSF-DH-D-2014023)
文摘The monodisperse Au@Ag bimetallic nanorod is encapsulated by crosslinked poly( N-isopropylacrylamide)( PNIPAM) to produce thermo-responsive composite microgel with well-defined core-shell structure( Au@ Ag NR@ PNIPAM microgel)by seed-precipitation polymerization method using butenoic acid modified Au @ Ag NRs as seeds. When the temperature of the aqueous medium increases from 20℃ to 50℃,the localized surface plasmon resonance( LSPR) band of the entrapped Au @ Ag NR is pronouncedly red-shifted because of the decreased spatial distances between them as a result of shrinkage of the microgels,leading to their plasmonic coupling. The temperature tunable plasmonic coupling is demonstrated by temperature dependence of the surface enhanced Raman spectroscopy( SERS) signal of 1-naphthol in aqueous solution. Different from static plasmonic coupling modes from nanostructured assembly or array system of noble metals,the proposed plasmonic coupling can be dynamically controlled by environmental temperature. Therefore, the thermo responsive hybrid microgels have potential applications in mobile LSPR or SERS microsensors for living tissues or cells.
基金Project supported by the Development Plan for Academics in Huanshui,the Natural Science Foundation of the Henan Province(182300410169,182102210201)the Support Project of Scientific and Technological Innovation Talents of Universities in Henan Province(19HASTIT023).
文摘Cerium oxide/silicon rubber was prepared via mechanical blending.Mechanical and frictional properties,as well as thermal stability after thermo-oxidative ageing were investigated in this rubber composite.3D surface profilometry,scanning electron microscopy(SEM)and thermogravimetry analysis(TGA)were used to study the friction surface characteristics,friction mechanism and thermal stability,respectively.Additionally,swelling experiments were carried out to investigate the variation of crosslinking density.After thermo-oxidative ageing,the tear strength of cerium oxide/silicon rubber decreases.However,in the early ageing stage,improvements in tensile strength,elongation at break,and frictional performance are caused by crosslinking density increments.Moreover,the addition of cerium oxide remarkably improves the re-cross linking degree during ageing process,which in turn decreases the number of holes on the friction surface and endows the silicon rubber with better mechanical and frictional properties,as well as thermo-oxidative ageing resistance.
文摘Systematic physical simulation of thermo-mechanical processing routes has been ap-plied on a Gleeble 1500 simulator to four copper alloys (mass %) Cu-0.57Co-0.32Si,Cu-0.55Cr-0.065P, Cu-0.22Zr-0.035Si and Cu-1.01Ni-0.43Si aimed at clarifying theinfluences of processing conditions on their final properties, strength and electricalconductivity. Flow curves were determined over wide temperature and strain rateranges. Hardness was used as a measure of the strength level achieved. High hard-ness was obtained as using equal amounts (strains 0.5) of cold deformation beforeand after the precipitation annealing stage. The maximum values achieved for theCu-Co-Si, Cu-Cr-P, Cu-Zr-Si and Cu-Ni-Si alloys were 190, 165, 178 and 193 HV5,respectively. A thermo-mechanical schedule involving the hot deformation-ageing-colddeformation stages showed even better results for the Cu-Zr-Si alloy. Consequently,the processing routes were designed based on simulation test results and wires of 5 and2mm in diameters have been successfully processed in the industrial scale.
文摘The influence of thermo cycle times under variant loads and environment temperatures on the properties of Cu-16.4Zn-4Al (Re) SMA component was studied by thermostability experiments on Cu-16.4Zn-4Al SMA with the composition containing corium Re. Tangent rule was applied to determine the transformation temperature from displacement-temperature loop plot by computer in each thermal-cold cycle. The results is as follows the transformation temperature increases and shape memory property decrease with increasing load, which leads the action temperature of component to be abnormal, and the memory property decreases after overheating aging, and the memory property decreases with increasing cycle times, while the decreasing is not obvious and the recovery ratio is higher than 90% in one thousand times. It is due to the addition of corium Re which has the function of grain refinement. Therefore, it is necessary to avoid overloading and overheating in the application of such component. Thus, a kind of thermo valve that works at normal pressure and in the water as working substance was designed to replace complicate original electromechanical system.
