Structural and lattice dynamical properties of ReB2,RuB2,and OsB2 in the ReB2 structure are studied in the framework of density functional theory within the generalized gradient approximation.The present results show ...Structural and lattice dynamical properties of ReB2,RuB2,and OsB2 in the ReB2 structure are studied in the framework of density functional theory within the generalized gradient approximation.The present results show that these compounds are dynamically stable for the considered structure.The temperature-dependent behaviors of thermodynamical properties such as internal energy,free energy,entropy,and heat capacity are also presented.The obtained results are in good agreement with the available experimental and theoretical data.展开更多
The melting and freezing processes of CUN (N =180, 256, 360, 408, 500, 628 and 736) nanoclnsters are simulated by using micro-canonical molecular dynamics simulation technique, The potential energies and the heat ca...The melting and freezing processes of CUN (N =180, 256, 360, 408, 500, 628 and 736) nanoclnsters are simulated by using micro-canonical molecular dynamics simulation technique, The potential energies and the heat capacities as a function of temperature are obtained. The results reveal that the melting and freezing points increase almost linearly with the atom number in the cluster increasing. All copper nanoclusters have negative heat capacity around the melting and freezing points, and hysteresis effect in the melting/freezing transition is derived in CUN nanoclusters for the first time.展开更多
The solubility of 2,3,4-trichloro-1,5-dinitrobenzene(TCDNB) was measured by a laser dynamic method over the temperature range from 278.15 K to 323.15 K under 0.1 MPa in fifteen mono-solvents(methanol,ethanol,isopropan...The solubility of 2,3,4-trichloro-1,5-dinitrobenzene(TCDNB) was measured by a laser dynamic method over the temperature range from 278.15 K to 323.15 K under 0.1 MPa in fifteen mono-solvents(methanol,ethanol,isopropanol,n-butanol,toluene,dichloromethane,chloroform,tetrachloromethane,1,2-dichloroethane,acetone,ethyl acetate,acetonitrile,N-methylpyrrolidone(NMP),N,Ndimethylformamide dimethyl sulfoxide(DMF),dimethyl sulfoxide(DMSO).The solubility of TCDNB could be increased with increasing temperature in fifteen mono-solvents.TCDNB solubility is in the following order at 298.15 K:NMP>DMF>DMSO>toluene>acetone>ethyl acetate>dichloromethane>1,2-dich loroethane>chloroform>acetonitrile>tetrachloromethane>methanol>ethanol>n-butanol>isopropanol.The KAT-LSER model was used to investigate the solvent effect,which revealed that the hydrogen bond acidity of solvents has a greater effect on TCDNB solubility.The van't Hoff model,the modified Apelblat model,theλh model,and the non-random two liquid(NRTL)model were used to correlate the solubility of TCDNB.The calculated solubility data agreed well with the experimental data,and the modified Apelblat model fit best.Furthermore,the van't Hoff and Gibbs equations were also used to calculate the dissolution thermodynamic properties of TCDNB in various solvents.TCDNB dissolution could be an enthalpy-driven,non-spontaneous,and endothermic process in fifteen mono-solvents.The determination and fitting solubility of TCDNB,as well as the calculation of its thermodynamic properties,would be critical in the purification and crystallization of its preparation process research.展开更多
A357-SiCp/A357 layered composites were prepared using a semi-solid vacuum stirring suction casting method.The microstructures,mechanical properties,and thermal conductivities of the composites fabricated under differe...A357-SiCp/A357 layered composites were prepared using a semi-solid vacuum stirring suction casting method.The microstructures,mechanical properties,and thermal conductivities of the composites fabricated under different suction casting processes were compared.Additionally,the microstructural evolution characteristics and performance enhancement mechanism of the A357-SiCp/A357 layered composites were discussed.The results demonstrate that suction casting at 610°C with a low solid phase ratio can significantly enhance the material density and reduce the agglomeration of SiCp.The A357-SiC_(p)/A357 interface is clear and straight with good bonding.With an increase in the suction casting temperature,the bending resistance and thermal conductivity of the A357-SiC_(p)/A357 layered composites exhibit a trend of significantly increase at first and then slowly decrease owing to casting defects,interface bonding,and SiCp distribution.Compared with SiCp/A357 composites,the bending strength,deflection,and thermal conductivity of the A357-SiCp/A357 layered composites increase from 257 MPa,1.07 mm,and 155.72 W·(m·K)^(-1) to 298 MPa,2.1 mm,and 169.86 W·(m·K)^(-1),respectively.This study provides a reference for improving the rheological casting of aluminum matrix layered composites.展开更多
In order to expand the advantages of strong durability and high compressive strength of calcium silicate hydrates(C-S-H),at the same time to make up for the poor early mechanical strength of magnesium silicate hydrate...In order to expand the advantages of strong durability and high compressive strength of calcium silicate hydrates(C-S-H),at the same time to make up for the poor early mechanical strength of magnesium silicate hydrates (M-S-H),we present the features and advantages of C-S-H and M-S-H and a comprehensive review of the progress on CaO-MgO-SiO_(2)-H_(2)O.Moreover,we systematically describe natural calcium and magnesium silicate minerals and thermodynamic properties of CaO-MgO-SiO_(2)-H_(2)O.The effect of magnesium on C-S-H and calcium on M-S-H is summarized deeply;the formation and structural feature of CaO-MgO-SiO_(2)-H_(2)O is also explained in detail.Finally,the development of calcium and magnesium silicate hydrates in the future is pointed out,and the further research is discussed and estimated.展开更多
Knowledge of thermodynamic properties as well as parameters such as energy density and power flow isimportant for modeling thermal plasmas of fluoroalkylamine-air mixtures. In this paper, these thermodynamic prop...Knowledge of thermodynamic properties as well as parameters such as energy density and power flow isimportant for modeling thermal plasmas of fluoroalkylamine-air mixtures. In this paper, these thermodynamic properties of fluoroalkylamine-air mixture plasmas are calculated in a temperature range of 500 K to 20,000 K at atmospheric pressure and local thermodynamic equilibrium (LTE). The Gibbs free energy minimization method is used to determine the chemical equilibrium compositions of the plasmas that are needed to calculate the thermodynamic properties. These thermodynamic properties are then used to calculate the energy density and power flow of these plasmas. The variation of the energy density is related to the variations of the density and mass enthalpy. We notice that, this energy density increases with the percentage of air in the mixture for temperatures higher than 7000 K. The power flow, which depends also on density, enthalpy mass and sound speed, increases with the percentage of air in the same temperature range. Energy density and power flow results show that increasing air percentage in the mixture can be more interesting for damaging gaseous chemical species such as CF<sub>2</sub>, CO, HCN, and HF appearing at low temperatures with high concentrations.展开更多
Cubic protactinium hydrides are very important existing form in superconducting protactinium hydrogen series. In this work, the ground state structure and properties of cubic PaH<sub>3</sub> have been stud...Cubic protactinium hydrides are very important existing form in superconducting protactinium hydrogen series. In this work, the ground state structure and properties of cubic PaH<sub>3</sub> have been studied using the DFT + U method. This systematic study for two bulk properties includes the electronic structures, phonon dispersion curves, structural, mechanical and thermodynamic properties under the effective coulomb U and exchange J PBE + U parameters. Structural relaxation results show that the Pa-H and Pa-Pa distances in α-PaH<sub>3</sub> are significantly higher than that in β-PaH<sub>3</sub>, and the H-H distances in α-PaH<sub>3</sub> are slightly smaller than that in β-PaH<sub>3</sub>. For the ground state electronic structures of α-PaH<sub>3</sub> and β-PaH<sub>3</sub>, we found that α-PaH<sub>3</sub> and β-PaH<sub>3</sub> are metallic, and the protactinium 5f electronic states and hydrogen have obvious bonding effect, resulting in weakening of the material’s metallicity. This is consistent with observations for the other actinide hydrides such as ThH<sub>3</sub> and UH<sub>3</sub>. The phonon spectrum calculations reveal that the PBE and PBE + U methods give quite different frequencies for the optical branches of phonons of α-PaH<sub>3</sub> and β-PaH<sub>3</sub>. In addition, by including the vibrational entropy and the ZPE using the phonon frequencies obtained from the optimized unit cells we predict that the β-PaH<sub>3</sub> phase can not transit into α-PaH<sub>3</sub> phase above room temperature.展开更多
The structural vibrational, thermodynamical, and optical properties of potentially technologically important, weakly coupled MAX compound, Sc2 Al C are calculated using density functional theory(DFT). The structural p...The structural vibrational, thermodynamical, and optical properties of potentially technologically important, weakly coupled MAX compound, Sc2 Al C are calculated using density functional theory(DFT). The structural properties of ScAlC are compared with the results reported earlier. The vibrational, thermodynamical, and optical properties are theoretically estimated for the first time. The phonon dispersion curve is calculated and the dynamical stability of this compound is investigated. The optical and acoustic modes are observed clearly. We calculate the Helmholtz free energy(F), internal energy(E), entropy(S), and specific heat capacity(Cv) from the phonon density of states. Various optical parameters are also calculated. The reflectance spectrum shows that this compound has the potential to be used as an efficient solar reflector.展开更多
To improve the electrochemical properties of rare-earth-Mg-Ni-based hydrogen storage alloys, the effects of stoichiometry and Cu-substitution on the phase structure and thermodynamic properties of the alloys were stud...To improve the electrochemical properties of rare-earth-Mg-Ni-based hydrogen storage alloys, the effects of stoichiometry and Cu-substitution on the phase structure and thermodynamic properties of the alloys were studied. Nonsubstituted Ml0.80Mg0.20(Ni2.90Co0.50-Mn0.30Al0.30)x (x=0.68, 0.70, 0.72, 0.74, 0.76) alloys and Cu-substituted Ml0.80Mg0.20(Ni2.90Co0.50-yCuyMn0.30Al0.30)0.70 (y=0, 0.10, 0.30, 0.50) alloys were prepared by induction melting. Phase structure analysis shows that the nonsubstituted alloys consist of a LaNi5 phase, a LaNi3 phase, and a minor La2Ni7 phase;in addition, in the case of Cu-substitution, the Nd2Ni7 phase appears and the LaNi3 phase vanishes. Ther-modynamic tests show that the enthalpy change in the dehydriding process decreases, indicating that hydride stability decreases with in-creasing stoichiometry and increasing Cu content. The maximum discharge capacity, kinetic properties, and cycling stability of the alloy electrodes all increase and then decrease with increasing stoichiometry or increasing Cu content. Furthermore, Cu substitution for Co ame-liorates the discharge capacity, kinetics, and cycling stability of the alloy electrodes.展开更多
Electronic structure and elastic properties of Al_(2)Y,Al_(3)Y,Al_(2)Gd and Al_(3)Gd phases were investigated by means of first-principles calculations from CASTEP program based on density functional theory(DFT).The g...Electronic structure and elastic properties of Al_(2)Y,Al_(3)Y,Al_(2)Gd and Al_(3)Gd phases were investigated by means of first-principles calculations from CASTEP program based on density functional theory(DFT).The ground state energy and elastic constants of each phase were calculated,the formation enthalpy(ΔH),bulk modulus(B),shear modulus(G),Young's modulus(E),Poisson's ratio(ν)and anisotropic coefficient(A)were derived.The formation enthalpy shows that Al_(2)RE is more stable than Al_(3)RE,and Al-Y intermetallics have stronger phase stability than Al-Gd intermetallics.The calculated mechanical properties indicate that all these four intermetallics are strong and hard brittle phases,it may lead to the similar performance when deforming due to their similar elastic constants.The total and partial electron density of states(DOS),Mulliken population and metallicity were calculated to analyze the electron structure and bonding characteristics of the phases.Finally,phonon calculation was conducted,and the thermodynamic properties were obtained and further discussed.展开更多
The geometric structures,electronic absorption spectrum,and thermodynamic pro-perties of 3-(4-N-maleimido)-phenyl-2,4-dihydro-2H-1,3-benzoxazine molecule were studied at the B3LYP/6-311+G* level by density functio...The geometric structures,electronic absorption spectrum,and thermodynamic pro-perties of 3-(4-N-maleimido)-phenyl-2,4-dihydro-2H-1,3-benzoxazine molecule were studied at the B3LYP/6-311+G* level by density functional theory.The results show that three rings of this molecule are in different planes.In gas,absorption wavelength of the lowest energy excitation was obtained at 503 nm,and solvents made it blue-shifted by 3-7 nm,both corresponding to the electron transition of HOMO → LUMO.At 298.15 K,the standard molar formed enthalpy and free energy of the title compound molecule were-549.43 and-273.37 kJ·mol-1,respectively.展开更多
The adsorption behavior of benzoic acid onto a water-compatible hypercrosslinked polymeric adsorbent NJ-8 wascompared with that onto macroporous Amberlite XAN-4. This paper focuses on the static equilibrium adsorption...The adsorption behavior of benzoic acid onto a water-compatible hypercrosslinked polymeric adsorbent NJ-8 wascompared with that onto macroporous Amberlite XAN-4. This paper focuses on the static equilibrium adsorption behaviors,the adsorption thermodynamics and the column dynamic adsorption profiles. Five isotherm models are used to fit the results.This shows that the Freundlich equation can give a perfect fit. The specific surface area of NJ-8 is about as high as that ofAmberlite XAD-4, but the adsorbing capacity for benzoic acid on NJ-8 is about 14.9%-64.8% higher than that on AmberliteXAD-4, which is attributed to its microporous mechanism and partial polarity. The negative values of the adsorptionenthalpy are indicative of an exothermic process. Both enthalpy and free energy changes of adsorption manifest a physicalsorption process. The negative values of the adsorption entropy indicate that adsorption is well consistent with the restrictedmobilities and the configurations of the adsorbed molecules on the surface of the studied adsorbents with superficialheterogeneity. Both adsorbents were used in mini-column experiments to demonstrate the higher breakthrough adsorbing capacity of the hypercrosslinked polymeric adsorbent NJ-8 to benzoic acid, as compared with that of Amberlite XAD-4.展开更多
This paper derives the analytical expression of free energy for a weakly interacting Fermi gas in a weak magnetic field, by using the methods of quantum statistics as well as considering the relativistic effect. Based...This paper derives the analytical expression of free energy for a weakly interacting Fermi gas in a weak magnetic field, by using the methods of quantum statistics as well as considering the relativistic effect. Based on the derived expression, the thermodynamic properties of the system at both high and low temperatures are given and the relativistic effect on the properties of the system is discussed. It shows that, in comparison with a nonrelativistic situation, the relativistic effect changes the influence of temperature on the thermodynamic properties of the system at high temperatures, and changes the influence of particle-number density on them at extremely low temperature. But the relativistic effect does not change the influence of the magnetic field and inter-particle interactions on the thermodynamic properties of the system at both high and extremely low temperatures.展开更多
Adsorption of atrazine, prometryne and prometon was determined on six soils with different physical and chemical properties. The adsorption isotherms of three herbicides could well fit Freundlich equation. On all of s...Adsorption of atrazine, prometryne and prometon was determined on six soils with different physical and chemical properties. The adsorption isotherms of three herbicides could well fit Freundlich equation. On all of six soils, adsorption of herbicides increased in the order: atrazine ≈prometon<prometryne. This order is quite the same to the calculation result of by means of excess thermodynamic properties of triazine. The Freundlich adsorption constants, K f, showed to have good correlation with organic matter(OM%) of soils for each of these herbicides, suggesting that OM is the main factor, which dominates in the adsorption process of these triazine herbicides.展开更多
The effects of high pressure on lattice stability, mechanical and thermodynamic properties of L1_2 structure Al_3Tm and Al_3Lu are studied by first-principles calculations within the VASP code. The phonon dispersion c...The effects of high pressure on lattice stability, mechanical and thermodynamic properties of L1_2 structure Al_3Tm and Al_3Lu are studied by first-principles calculations within the VASP code. The phonon dispersion curves and density of phonon states are calculated by using the PHONONPY code. Our results agree well with the available experimental and theoretical values. The vibrational properties indicate that Al_3Tm and A_3Lu keep their dynamical stabilities in L1_2 structure up to 100 GPa. The elastic properties and Debye temperatures for Al_3Tm and Al_3 Lu increase with the increase of pressure. The mechanical anisotropic properties are discussed by using anisotropic indices AG, AU, AZ, and the threedimensional(3D) curved surface of Young's modulus. The calculated results show that Al_3Tm and Al_3Lu are both isotropic at 0 GPa and anisotropic under high pressure. In the present work, the sound velocities in different directions for Al_3Tm and Al_3Lu are also predicted under high pressure. We also calculate the thermodynamic properties and provide the relationships between thermal parameters and temperature/pressure. These results can provide theoretical support for further experimental work and industrial applications.展开更多
The electronic, optical and thermodynamic properties of ZnS in the zinc-blende (ZB) and wurtzite (WZ) structures are investigated by using the plane-wave pseudopotential density functional theory (DFT). The resu...The electronic, optical and thermodynamic properties of ZnS in the zinc-blende (ZB) and wurtzite (WZ) structures are investigated by using the plane-wave pseudopotential density functional theory (DFT). The results obtained are consistent with other theoretical results and the available experimental data. When the pressures are above 20.5 and 27 GPa, the ZB-ZnS and the WZ-ZnS are converted into indirect gap semiconductors, respectively. The critical point structure of the frequency-dependent complex dielectric function is investigated and analysed to identify the optical transitions. Moreover, the values of heat capacity Cv and Debye temperature θ at different pressures and different temperatures are also obtained successfully.展开更多
We show the results of first-principles calculations of structural,phonon,elastic,thermal and electronic properties of the Mg-X inter-metallics in their respective ground state phase and meta-stable phases at equilibr...We show the results of first-principles calculations of structural,phonon,elastic,thermal and electronic properties of the Mg-X inter-metallics in their respective ground state phase and meta-stable phases at equilibrium geometry and the studied pressure range.Phonon dispersion spectra for these compounds were investigated by using the linear response technique.The phonon spectra do not show any abnormality in their respective ground state phase.The respective ground states phases of the studied system remain stable within the studied pressure range.Electronic and thermodynamic properties were derived by analysis of the electronic structures and quasi-harmonic approximation.The mixed bonding character of the Mg-X intermetallics is revealed by Mg-X bonds,and it leads the metallic nature.Most of the contribution originated from X ions d like states at Fermi level compared to that of Mg ion in these intermetallics.In this work,we also predicted the melting temperature of these intermetallics and evaluated the Debye temperature by using elastic constants.展开更多
In this paper, the fully optimized molecular geometries and electronic structures of six 1,2,3- and 1,2,4-triazoles were calculated using density functional theory B3LYP/6-311G^** method. The salvation energies were...In this paper, the fully optimized molecular geometries and electronic structures of six 1,2,3- and 1,2,4-triazoles were calculated using density functional theory B3LYP/6-311G^** method. The salvation energies were obtained by SCRF in THF. The results show that the total energies of F are the lowest both in gas and liquid phases, and the order of thermodynamic stabilities of the title compounds is F〉D〉C〉B〉E〉A. Their frontier orbital energy gaps and electron delocalization also support that F is the most stable. All the computed conclusions are in good agreement with the experiments. Vibrational frequencies of the title compounds were computed. The thermodynamic properties and their temperature curves of six compounds were obtained by using the statistical thermodynamic method with the temperature ranging from 200 to 1000 K.展开更多
The hydriding/dehydriding thermodynamic properties of the slurry system formed by suspending La rich mischmetal nickel hydrogen storage alloy (MlNi 5) in Benzene (C 6H 6) were investigated. The pressure compositi...The hydriding/dehydriding thermodynamic properties of the slurry system formed by suspending La rich mischmetal nickel hydrogen storage alloy (MlNi 5) in Benzene (C 6H 6) were investigated. The pressure composition isotherms for both the alloy powder and the slurry suspended with MlNi 5 were measured at several temperatures(10, 20, 30, 40 ℃). The standard enthalpy of formation Δ H ° and standard entropy of formation Δ S ° for the alloy powder with and without benzene were determined respectively. The experimental results show that the values of Δ H ° and Δ S ° for the hydriding reaction of hydrogen storage alloy (MlNi 5) of the slurry system and the gas solid system are all very close.展开更多
Refractory high-entropy alloys(RHEAs)are emerging as new materials for high temperature structural applications because of their stable mechanical and thermal properties at temperatures higher than 2273 K.In this stud...Refractory high-entropy alloys(RHEAs)are emerging as new materials for high temperature structural applications because of their stable mechanical and thermal properties at temperatures higher than 2273 K.In this study,the mechanical properties of MoNbTaTiW RHEA are examined by applying calculations based on first-principles density functional theory(DFT)and using a large unit cell with 100 randomized atoms.The phase calculation of MoNbTaTiW with CALPHAD method shows the existence of a stable body-centered cubic structure at a high temperature and a hexagonal closely packed phase at a low temperature.The predicted phase,shear modulus,Young’s modulus,Poisson’s ratio,and hardness values are consistent with available experimental results.The linear thermal expansion coefficient,vibrational entropy,and vibrational heat capacity of MoNbTaTiW RHEA are investigated in accordance with Debye-Grüneisen theory.These results may provide a basis for future research related to the application of RHEAs.展开更多
文摘Structural and lattice dynamical properties of ReB2,RuB2,and OsB2 in the ReB2 structure are studied in the framework of density functional theory within the generalized gradient approximation.The present results show that these compounds are dynamically stable for the considered structure.The temperature-dependent behaviors of thermodynamical properties such as internal energy,free energy,entropy,and heat capacity are also presented.The obtained results are in good agreement with the available experimental and theoretical data.
文摘The melting and freezing processes of CUN (N =180, 256, 360, 408, 500, 628 and 736) nanoclnsters are simulated by using micro-canonical molecular dynamics simulation technique, The potential energies and the heat capacities as a function of temperature are obtained. The results reveal that the melting and freezing points increase almost linearly with the atom number in the cluster increasing. All copper nanoclusters have negative heat capacity around the melting and freezing points, and hysteresis effect in the melting/freezing transition is derived in CUN nanoclusters for the first time.
文摘The solubility of 2,3,4-trichloro-1,5-dinitrobenzene(TCDNB) was measured by a laser dynamic method over the temperature range from 278.15 K to 323.15 K under 0.1 MPa in fifteen mono-solvents(methanol,ethanol,isopropanol,n-butanol,toluene,dichloromethane,chloroform,tetrachloromethane,1,2-dichloroethane,acetone,ethyl acetate,acetonitrile,N-methylpyrrolidone(NMP),N,Ndimethylformamide dimethyl sulfoxide(DMF),dimethyl sulfoxide(DMSO).The solubility of TCDNB could be increased with increasing temperature in fifteen mono-solvents.TCDNB solubility is in the following order at 298.15 K:NMP>DMF>DMSO>toluene>acetone>ethyl acetate>dichloromethane>1,2-dich loroethane>chloroform>acetonitrile>tetrachloromethane>methanol>ethanol>n-butanol>isopropanol.The KAT-LSER model was used to investigate the solvent effect,which revealed that the hydrogen bond acidity of solvents has a greater effect on TCDNB solubility.The van't Hoff model,the modified Apelblat model,theλh model,and the non-random two liquid(NRTL)model were used to correlate the solubility of TCDNB.The calculated solubility data agreed well with the experimental data,and the modified Apelblat model fit best.Furthermore,the van't Hoff and Gibbs equations were also used to calculate the dissolution thermodynamic properties of TCDNB in various solvents.TCDNB dissolution could be an enthalpy-driven,non-spontaneous,and endothermic process in fifteen mono-solvents.The determination and fitting solubility of TCDNB,as well as the calculation of its thermodynamic properties,would be critical in the purification and crystallization of its preparation process research.
文摘A357-SiCp/A357 layered composites were prepared using a semi-solid vacuum stirring suction casting method.The microstructures,mechanical properties,and thermal conductivities of the composites fabricated under different suction casting processes were compared.Additionally,the microstructural evolution characteristics and performance enhancement mechanism of the A357-SiCp/A357 layered composites were discussed.The results demonstrate that suction casting at 610°C with a low solid phase ratio can significantly enhance the material density and reduce the agglomeration of SiCp.The A357-SiC_(p)/A357 interface is clear and straight with good bonding.With an increase in the suction casting temperature,the bending resistance and thermal conductivity of the A357-SiC_(p)/A357 layered composites exhibit a trend of significantly increase at first and then slowly decrease owing to casting defects,interface bonding,and SiCp distribution.Compared with SiCp/A357 composites,the bending strength,deflection,and thermal conductivity of the A357-SiCp/A357 layered composites increase from 257 MPa,1.07 mm,and 155.72 W·(m·K)^(-1) to 298 MPa,2.1 mm,and 169.86 W·(m·K)^(-1),respectively.This study provides a reference for improving the rheological casting of aluminum matrix layered composites.
基金Funded by Natural Science Basic Research Plan in Shaanxi Province of China (Nos.2021JQ-500, 2021GY-203, 2023-JCYB-096)Shaanxi Provincial Education Department of Key Scientific Research Plan (No.20JS079)Shaanxi Provincial Education Department of Normal Scientific Research Plan (No.20JK0727)。
文摘In order to expand the advantages of strong durability and high compressive strength of calcium silicate hydrates(C-S-H),at the same time to make up for the poor early mechanical strength of magnesium silicate hydrates (M-S-H),we present the features and advantages of C-S-H and M-S-H and a comprehensive review of the progress on CaO-MgO-SiO_(2)-H_(2)O.Moreover,we systematically describe natural calcium and magnesium silicate minerals and thermodynamic properties of CaO-MgO-SiO_(2)-H_(2)O.The effect of magnesium on C-S-H and calcium on M-S-H is summarized deeply;the formation and structural feature of CaO-MgO-SiO_(2)-H_(2)O is also explained in detail.Finally,the development of calcium and magnesium silicate hydrates in the future is pointed out,and the further research is discussed and estimated.
文摘Knowledge of thermodynamic properties as well as parameters such as energy density and power flow isimportant for modeling thermal plasmas of fluoroalkylamine-air mixtures. In this paper, these thermodynamic properties of fluoroalkylamine-air mixture plasmas are calculated in a temperature range of 500 K to 20,000 K at atmospheric pressure and local thermodynamic equilibrium (LTE). The Gibbs free energy minimization method is used to determine the chemical equilibrium compositions of the plasmas that are needed to calculate the thermodynamic properties. These thermodynamic properties are then used to calculate the energy density and power flow of these plasmas. The variation of the energy density is related to the variations of the density and mass enthalpy. We notice that, this energy density increases with the percentage of air in the mixture for temperatures higher than 7000 K. The power flow, which depends also on density, enthalpy mass and sound speed, increases with the percentage of air in the same temperature range. Energy density and power flow results show that increasing air percentage in the mixture can be more interesting for damaging gaseous chemical species such as CF<sub>2</sub>, CO, HCN, and HF appearing at low temperatures with high concentrations.
文摘Cubic protactinium hydrides are very important existing form in superconducting protactinium hydrogen series. In this work, the ground state structure and properties of cubic PaH<sub>3</sub> have been studied using the DFT + U method. This systematic study for two bulk properties includes the electronic structures, phonon dispersion curves, structural, mechanical and thermodynamic properties under the effective coulomb U and exchange J PBE + U parameters. Structural relaxation results show that the Pa-H and Pa-Pa distances in α-PaH<sub>3</sub> are significantly higher than that in β-PaH<sub>3</sub>, and the H-H distances in α-PaH<sub>3</sub> are slightly smaller than that in β-PaH<sub>3</sub>. For the ground state electronic structures of α-PaH<sub>3</sub> and β-PaH<sub>3</sub>, we found that α-PaH<sub>3</sub> and β-PaH<sub>3</sub> are metallic, and the protactinium 5f electronic states and hydrogen have obvious bonding effect, resulting in weakening of the material’s metallicity. This is consistent with observations for the other actinide hydrides such as ThH<sub>3</sub> and UH<sub>3</sub>. The phonon spectrum calculations reveal that the PBE and PBE + U methods give quite different frequencies for the optical branches of phonons of α-PaH<sub>3</sub> and β-PaH<sub>3</sub>. In addition, by including the vibrational entropy and the ZPE using the phonon frequencies obtained from the optimized unit cells we predict that the β-PaH<sub>3</sub> phase can not transit into α-PaH<sub>3</sub> phase above room temperature.
文摘The structural vibrational, thermodynamical, and optical properties of potentially technologically important, weakly coupled MAX compound, Sc2 Al C are calculated using density functional theory(DFT). The structural properties of ScAlC are compared with the results reported earlier. The vibrational, thermodynamical, and optical properties are theoretically estimated for the first time. The phonon dispersion curve is calculated and the dynamical stability of this compound is investigated. The optical and acoustic modes are observed clearly. We calculate the Helmholtz free energy(F), internal energy(E), entropy(S), and specific heat capacity(Cv) from the phonon density of states. Various optical parameters are also calculated. The reflectance spectrum shows that this compound has the potential to be used as an efficient solar reflector.
基金supported by the National Natural Science Foundation of China(Nos.21303157 and 21106123)the Natural Science Foundation of Hebei Province,China(No.B2012203104)+1 种基金the China Postdoctoral Science Foundation Project(2013M541201)the Research Fund for the Doctoral Program of Higher Education of China(20131333120008)
文摘To improve the electrochemical properties of rare-earth-Mg-Ni-based hydrogen storage alloys, the effects of stoichiometry and Cu-substitution on the phase structure and thermodynamic properties of the alloys were studied. Nonsubstituted Ml0.80Mg0.20(Ni2.90Co0.50-Mn0.30Al0.30)x (x=0.68, 0.70, 0.72, 0.74, 0.76) alloys and Cu-substituted Ml0.80Mg0.20(Ni2.90Co0.50-yCuyMn0.30Al0.30)0.70 (y=0, 0.10, 0.30, 0.50) alloys were prepared by induction melting. Phase structure analysis shows that the nonsubstituted alloys consist of a LaNi5 phase, a LaNi3 phase, and a minor La2Ni7 phase;in addition, in the case of Cu-substitution, the Nd2Ni7 phase appears and the LaNi3 phase vanishes. Ther-modynamic tests show that the enthalpy change in the dehydriding process decreases, indicating that hydride stability decreases with in-creasing stoichiometry and increasing Cu content. The maximum discharge capacity, kinetic properties, and cycling stability of the alloy electrodes all increase and then decrease with increasing stoichiometry or increasing Cu content. Furthermore, Cu substitution for Co ame-liorates the discharge capacity, kinetics, and cycling stability of the alloy electrodes.
基金This work is supported by the Key Technologies Research and Development Program of Liaoning Province(2013201018).
文摘Electronic structure and elastic properties of Al_(2)Y,Al_(3)Y,Al_(2)Gd and Al_(3)Gd phases were investigated by means of first-principles calculations from CASTEP program based on density functional theory(DFT).The ground state energy and elastic constants of each phase were calculated,the formation enthalpy(ΔH),bulk modulus(B),shear modulus(G),Young's modulus(E),Poisson's ratio(ν)and anisotropic coefficient(A)were derived.The formation enthalpy shows that Al_(2)RE is more stable than Al_(3)RE,and Al-Y intermetallics have stronger phase stability than Al-Gd intermetallics.The calculated mechanical properties indicate that all these four intermetallics are strong and hard brittle phases,it may lead to the similar performance when deforming due to their similar elastic constants.The total and partial electron density of states(DOS),Mulliken population and metallicity were calculated to analyze the electron structure and bonding characteristics of the phases.Finally,phonon calculation was conducted,and the thermodynamic properties were obtained and further discussed.
基金Sponsored by the Supporting Project of Sichuan Province Key Technology Support Program (2011ZG0247)Sichuan Province Education Office Natural Science Foundation (10ZC080)
文摘The geometric structures,electronic absorption spectrum,and thermodynamic pro-perties of 3-(4-N-maleimido)-phenyl-2,4-dihydro-2H-1,3-benzoxazine molecule were studied at the B3LYP/6-311+G* level by density functional theory.The results show that three rings of this molecule are in different planes.In gas,absorption wavelength of the lowest energy excitation was obtained at 503 nm,and solvents made it blue-shifted by 3-7 nm,both corresponding to the electron transition of HOMO → LUMO.At 298.15 K,the standard molar formed enthalpy and free energy of the title compound molecule were-549.43 and-273.37 kJ·mol-1,respectively.
基金This work was supported by the National Natural Science Foundation (No. 20274017) and the Science & Technology Council, of Jiangsu Province, China.
文摘The adsorption behavior of benzoic acid onto a water-compatible hypercrosslinked polymeric adsorbent NJ-8 wascompared with that onto macroporous Amberlite XAN-4. This paper focuses on the static equilibrium adsorption behaviors,the adsorption thermodynamics and the column dynamic adsorption profiles. Five isotherm models are used to fit the results.This shows that the Freundlich equation can give a perfect fit. The specific surface area of NJ-8 is about as high as that ofAmberlite XAD-4, but the adsorbing capacity for benzoic acid on NJ-8 is about 14.9%-64.8% higher than that on AmberliteXAD-4, which is attributed to its microporous mechanism and partial polarity. The negative values of the adsorptionenthalpy are indicative of an exothermic process. Both enthalpy and free energy changes of adsorption manifest a physicalsorption process. The negative values of the adsorption entropy indicate that adsorption is well consistent with the restrictedmobilities and the configurations of the adsorbed molecules on the surface of the studied adsorbents with superficialheterogeneity. Both adsorbents were used in mini-column experiments to demonstrate the higher breakthrough adsorbing capacity of the hypercrosslinked polymeric adsorbent NJ-8 to benzoic acid, as compared with that of Amberlite XAD-4.
文摘This paper derives the analytical expression of free energy for a weakly interacting Fermi gas in a weak magnetic field, by using the methods of quantum statistics as well as considering the relativistic effect. Based on the derived expression, the thermodynamic properties of the system at both high and low temperatures are given and the relativistic effect on the properties of the system is discussed. It shows that, in comparison with a nonrelativistic situation, the relativistic effect changes the influence of temperature on the thermodynamic properties of the system at high temperatures, and changes the influence of particle-number density on them at extremely low temperature. But the relativistic effect does not change the influence of the magnetic field and inter-particle interactions on the thermodynamic properties of the system at both high and extremely low temperatures.
文摘Adsorption of atrazine, prometryne and prometon was determined on six soils with different physical and chemical properties. The adsorption isotherms of three herbicides could well fit Freundlich equation. On all of six soils, adsorption of herbicides increased in the order: atrazine ≈prometon<prometryne. This order is quite the same to the calculation result of by means of excess thermodynamic properties of triazine. The Freundlich adsorption constants, K f, showed to have good correlation with organic matter(OM%) of soils for each of these herbicides, suggesting that OM is the main factor, which dominates in the adsorption process of these triazine herbicides.
基金Project supported by the Scientific Technology Plan of the Educational Department of Liaoning Province and Liaoning Innovative Research Team in University,China(Grant No.LT2014004)the Program for the Young Teacher Cultivation Fund of Shenyang University of Technology,China(Grant No.005612)
文摘The effects of high pressure on lattice stability, mechanical and thermodynamic properties of L1_2 structure Al_3Tm and Al_3Lu are studied by first-principles calculations within the VASP code. The phonon dispersion curves and density of phonon states are calculated by using the PHONONPY code. Our results agree well with the available experimental and theoretical values. The vibrational properties indicate that Al_3Tm and A_3Lu keep their dynamical stabilities in L1_2 structure up to 100 GPa. The elastic properties and Debye temperatures for Al_3Tm and Al_3 Lu increase with the increase of pressure. The mechanical anisotropic properties are discussed by using anisotropic indices AG, AU, AZ, and the threedimensional(3D) curved surface of Young's modulus. The calculated results show that Al_3Tm and Al_3Lu are both isotropic at 0 GPa and anisotropic under high pressure. In the present work, the sound velocities in different directions for Al_3Tm and Al_3Lu are also predicted under high pressure. We also calculate the thermodynamic properties and provide the relationships between thermal parameters and temperature/pressure. These results can provide theoretical support for further experimental work and industrial applications.
基金Project supported by the National Natural Science Foundation of China (Grant No 10776022)the State Key Program of NationalNatural Science of China (Grant No 60436010)the Fund of Key Laboratory for Shockwave and Detonation Physics (GrantNo 9140C6711010805)
文摘The electronic, optical and thermodynamic properties of ZnS in the zinc-blende (ZB) and wurtzite (WZ) structures are investigated by using the plane-wave pseudopotential density functional theory (DFT). The results obtained are consistent with other theoretical results and the available experimental data. When the pressures are above 20.5 and 27 GPa, the ZB-ZnS and the WZ-ZnS are converted into indirect gap semiconductors, respectively. The critical point structure of the frequency-dependent complex dielectric function is investigated and analysed to identify the optical transitions. Moreover, the values of heat capacity Cv and Debye temperature θ at different pressures and different temperatures are also obtained successfully.
基金The present work was financially supported by a Grant-Aid for Science and Engineering Research Board(Grant No.SERB/F/922/2014-15),Department of Science&Technology,Government of India.
文摘We show the results of first-principles calculations of structural,phonon,elastic,thermal and electronic properties of the Mg-X inter-metallics in their respective ground state phase and meta-stable phases at equilibrium geometry and the studied pressure range.Phonon dispersion spectra for these compounds were investigated by using the linear response technique.The phonon spectra do not show any abnormality in their respective ground state phase.The respective ground states phases of the studied system remain stable within the studied pressure range.Electronic and thermodynamic properties were derived by analysis of the electronic structures and quasi-harmonic approximation.The mixed bonding character of the Mg-X intermetallics is revealed by Mg-X bonds,and it leads the metallic nature.Most of the contribution originated from X ions d like states at Fermi level compared to that of Mg ion in these intermetallics.In this work,we also predicted the melting temperature of these intermetallics and evaluated the Debye temperature by using elastic constants.
基金This work was supported by the Key National Natural Science Foundation of China (No. 10576030)
文摘In this paper, the fully optimized molecular geometries and electronic structures of six 1,2,3- and 1,2,4-triazoles were calculated using density functional theory B3LYP/6-311G^** method. The salvation energies were obtained by SCRF in THF. The results show that the total energies of F are the lowest both in gas and liquid phases, and the order of thermodynamic stabilities of the title compounds is F〉D〉C〉B〉E〉A. Their frontier orbital energy gaps and electron delocalization also support that F is the most stable. All the computed conclusions are in good agreement with the experiments. Vibrational frequencies of the title compounds were computed. The thermodynamic properties and their temperature curves of six compounds were obtained by using the statistical thermodynamic method with the temperature ranging from 200 to 1000 K.
文摘The hydriding/dehydriding thermodynamic properties of the slurry system formed by suspending La rich mischmetal nickel hydrogen storage alloy (MlNi 5) in Benzene (C 6H 6) were investigated. The pressure composition isotherms for both the alloy powder and the slurry suspended with MlNi 5 were measured at several temperatures(10, 20, 30, 40 ℃). The standard enthalpy of formation Δ H ° and standard entropy of formation Δ S ° for the alloy powder with and without benzene were determined respectively. The experimental results show that the values of Δ H ° and Δ S ° for the hydriding reaction of hydrogen storage alloy (MlNi 5) of the slurry system and the gas solid system are all very close.
基金the NSF EPSCoR CIMM project under the award#OIA-1541079 and DoD support under the W911NF1910005 contractComputational simulations were supported by the Louisiana Optical Network Infrastructure(LONI)with the supercomputer allocation loni_mat_bio12.
文摘Refractory high-entropy alloys(RHEAs)are emerging as new materials for high temperature structural applications because of their stable mechanical and thermal properties at temperatures higher than 2273 K.In this study,the mechanical properties of MoNbTaTiW RHEA are examined by applying calculations based on first-principles density functional theory(DFT)and using a large unit cell with 100 randomized atoms.The phase calculation of MoNbTaTiW with CALPHAD method shows the existence of a stable body-centered cubic structure at a high temperature and a hexagonal closely packed phase at a low temperature.The predicted phase,shear modulus,Young’s modulus,Poisson’s ratio,and hardness values are consistent with available experimental results.The linear thermal expansion coefficient,vibrational entropy,and vibrational heat capacity of MoNbTaTiW RHEA are investigated in accordance with Debye-Grüneisen theory.These results may provide a basis for future research related to the application of RHEAs.