A novel profile modification HPF-Co gel satisfied with fractured low permeability reservoirs in high temperature and high salinity

Conformance control and water plugging are a widely used EOR method in mature oilfields.However,majority of conformance control and water plugging agents are unavoidable dehydrated situation in high-temperature and high-salinity low permeability reservoirs.Consequently,a novel conformance control system HPF-Co gel,based on high-temperature stabilizer(CoCl_(2)·H_(2)O,CCH)is developed.The HPF-Co bulk gel has better performances with high temperature(120℃)and high salinity(1×10^(5)mg/L).According to Sydansk coding system,the gel strength of HPF-Co with CCH is increased to code G.The dehydration rate of HPF-Co gel is 32.0%after aging for 150 d at 120℃,showing excellent thermal stability.The rheological properties of HPF gel and HPF-Co gel are also studied.The results show that the storage modulus(G′)of HPF-Co gel is always greater than that of HPF gel.The effect of CCH on the microstructure of the gel is studied.The results show that the HPF-Co gel with CCH has a denser gel network,and the diameter of the three-dimensional network skeleton is 1.5-3.5μm.After 90 d of aging,HPF-Co gel still has a good three-dimensional structure.Infrared spectroscopy results show that CCH forms coordination bonds with N and O atoms in the gel amide group,which can suppress the vibration of cross-linked sites and improve the stability at high temperature.Fractured core plugging test determines the optimized polymer gel injection strategy and injection velocity with HPF-Co bulk gel system,plugging rate exceeding 98%.Moreover,the results of subsequent waterflooding recovery can be improved by 17%.

Numerical study on gas production via a horizontal well from hydrate reservoirs with different slope angles in the South China Sea

It is important to study the effect of hydrate production on the physical and mechanical properties of low-permeability clayey–silty reservoirs for the largescale exploitation of hydrate reservoirs in the South China Sea.In this study,a multiphysical-field coupling model,combined with actual exploration drilling data and the mechanical experimental data of hydrate cores in the laboratory,was established to investigate the physical and mechanical properties of low-permeability reservoirs with different slope angles during 5-year hydrate production by the depressurization method via a horizontal well.The result shows that the permeability of reservoirs severely affects gas production rate,and the maximum gas production amount of a 20-m-long horizontal well can reach186.8 m3/day during the 5-year hydrate production.Reservoirs with smaller slope angles show higher gas production rates.The depressurization propagation and hydrate dissociation mainly develop along the direction parallel to the slope.Besides,the mean effective stress of reservoirs is concentrated in the near-wellbore area with the on-going hydrate production,and gradually decreases with the increase of the slope angle.Different from the effective stress distribution law,the total reservoir settlement amount first decreases and then increases with the increase of the slope angle.The maximum settlement of reservoirs with a 0°slope angle is up to 3.4 m,and the displacement in the near-wellbore area is as high as2.2 m after 5 years of hydrate production.It is concluded that the pore pressure drop region of low-permeability reservoirs in the South China Sea is limited,and various slope angles further lead to differences in effective stress and strain of reservoirs during hydrate production,resulting in severe uneven settlement of reservoirs.

Pore structure differences of the extra-low permeability sandstone reservoirs and the causes of low resistivity oil layers: A case study of Block Yanwumao in the middle of Ordos Basin, NW China

The influence of pore structure difference on rock electrical characteristics of reservoir and oil reservoir was analyzed taking Triassic Chang 6 reservoir in Block Yanwumao in the middle of Ordos Basin as an example. The relationship between the pore structure difference and the low resistivity oil layer was revealed and demonstrated through core observation, lab experiments, geological research, well log interpretation and trial production etc. The results show that there were two kinds of oil layers in Chang 6 oil layer set, normal oil layer and low resistivity oil layer in the region, corresponding to two types of pore structures, pore type mono-medium and micro-fracture-pore type double-medium; the development of micro-fracture changed greatly the micro-pore structure of the reservoir, and the pore structure difference had an important influence on the rock electrical characteristics of the extra-low permeability sandstone reservoir and oil reservoir; the normal oil layers had obvious characteristics of pore-type mono-medium, and were concentrated in Chang 61, Chang 6232 and Chang 62; the low resistivity oil layers had obvious characteristics of micro-fracture-pore type double-medium, which were mainly distributed in Chang 612 and Chang 63. The mud filtrate penetrated deep into the oil layers along the micro-cracks, leading to sharp reduction of resistivity, and thus low resistivity of the oil layer; the low resistivity oil layers had better storage capacity and higher productivity than the normal oil layers.

Porosity Calculation of Tight Sand Gas Reservoirs with GA-CM Hybrid Optimization Log Interpretation Method

Tight sand gas reservoirs are our country’s fairly rich unconventional natural gas resources, and their exploration and development is of prime importance. Sulige Gas Field which located in the northern Ordos Basin is tight sand gas reservoirs. It is typically featured by low porosity and low permeability, and the error of porosity calculation by traditional methods is larger. Multicomponent explanation model is built by analyzing the thin slice data, and the objective function is got according to the concept of optimization log interpretation method. This paper puts the Genetic Algorithm and the Complex Algorithm together to form the GA-CM Hybrid Algorithm for searching the optimal solution of the objective function, getting the porosity of tight sandstone gas reservoirs. The deviation got by this method is lesser compared with the core porosity, with a high reliability.

Study on Geological Genesis and Sedimentary Model of Complex Low Resistivity Reservoir in Offshore Oilfield — A Case of NgIII Formation of X Oilfield in Bohai Sea

In order to study the micro genetic mechanism and main geological controlling factors of low resistivity reservoir in NgIII formation of X oilfield in Bohai sea in China, the clay mineral composition, irreducible water saturation, salinity and conductive minerals of low resistivity reservoir were studied by using the data of core, cast thin section and analysis, and compared with normal resistivity reservoir. At the same time, the control effect of sedimentary environment on low resistivity reservoir was discussed. The results show that the additional conductivity of high bound water content and high montmorillonite content in the reservoir together leads to the significant reduction of reservoir resistivity, which is the main microscopic cause of the formation of low resistance, and is mainly controlled by the sedimentary background such as paleoclimate and sedimentary cycle. During the deposition period of NgIII formation, the paleoclimate was dry and cold, and it was at the end of the water advance of the medium-term sedimentary cycle. The hydrodynamic force of the river channel was weak, the carrying capacity of the riverbed was weak, and the river channel swayed frequently, resulting in fine lithologic particle size, high shale content and complex pore structure of the reservoir, resulting in significant reduction of reservoir resistance. The research conclusion would have strong guiding significance for the development of low resistivity reservoirs in this area.

Extensive application of rate transient method in performance analysis for low permeability gas reservoirs

Rate transient method is a recently-developed performance analysis tool specially designed for low-permeability or tight gas reservoirs. This method, theoretically based on pressure transient analysis, integrates material balance principle and the concept of material balance pseudo-time proposed by Blansingame. With daily production data of gas well, it could be used to calculate OGIP, current formation pressure, permeability, skin factor, to identify complex geologic boundaries, to determine whether drainage boundary has been reached, to calculate drainage area and drainage radius for single well and to predict performance. It has been extensively employed in more than ten low-permeability gas fields. It proves that most problems in performance analysis for low permeability gas reservoirs could be solved by this method. Field practices show great economical benefits could be achieved by employing this method in gas field development.

Advances in enhanced oil recovery technologies for low permeability reservoirs

Low permeability oil and gas resources are rich and have great potential all over the world, which has gradually become the main goal of oil and gas development. However, after traditional primary and secondary exploitation, there is still a large amount of remaining oil that has not been recovered.Therefore, in recent years, enhanced oil recovery(EOR) technologies for low permeability reservoirs have been greatly developed to further improve crude oil production. This study presents a comprehensive review of EOR technologies in low permeability reservoirs with an emphasis on gas flooding, surfactant flooding, nanofluid flooding and imbibition EOR technologies. In addition, two kinds of gel systems are introduced for conformance control in low permeability reservoirs with channeling problems. Finally,the technical challenges, directions and outlooks of EOR in low permeability reservoirs are addressed.

Feasibility of Gas Drive in Fang-48 Fault Block Oil Reservoir

The Fang-48 fault block oil reservoir is an extremely low permeability reservoir, and it is difficult to produce such a reservoir by waterflooding. Laboratory analysis of reservoir oil shows that the minimum miscibility pressure for CO2 drive in Fang-48 fault block oil reservoir is 29 MPa, lower than the formation fracture pressure of 34 MPa, so the displacement mechanism is miscible drive. The threshold pressure gradient for gas injection is less than that for waterflooding, and the recovery by gas drive is higher than waterflooding. Furthermore, the threshold pressure gradient for carbon dioxide injection is smaller than that for hydrocarbon gas, and the oil recovery by carbon dioxide drive is higher than that by hydrocarbon gas displacement, so carbon dioxide drive is recommended for the development of the Fang-48 fault block oil reservoir.

Development of the theory and technology for low permeability reservoirs in China

The development theories of low-permeability oil and gas reservoirs are refined, the key development technologies are summarized, and the prospect and technical direction of sustainable development are discussed based on the understanding and research on developed low-permeability oil and gas resources in China. The main achievements include:(1) the theories of low-permeability reservoir seepage, dual-medium seepage, relative homogeneity, etc.(2) the well location optimization technology combining favorable area of reservoir with gas-bearing prediction and combining pre-stack with post-stack;(3) oriented perforating multi-fracture, multistage sand adding, multistage temporary plugging, vertical well multilayer, horizontal and other fracturing techniques to improve productivity of single well;(4) the technology of increasing injection and keeping pressure, such as overall decreasing pressure, local pressurization, shaped charge stamping and plugging removal, fine separate injection, mild advanced water injection and so on;(5) enhanced recovery technology of optimization of injection-production well network in horizontal wells. To continue to develop low-permeability reserves economically and effectively, there are three aspects of work to be done well:(1) depending on technical improvement, continue to innovate new technologies and methods, establish a new mode of low quality reservoir development economically, determine the main technical boundaries and form replacement technology reserves of advanced development;(2) adhering to the management system of low cost technology & low cost, set up a complete set of low-cost dual integration innovation system through continuous innovation in technology and management;(3) striving for national preferential policies.

Application of deviation rate in oil and gas reservoir exploration

Three dimensional geophysical models were abstracted and established according to characteristics of oil and gas reservoir.Then direct current fields for different models were simulated with finite element software(finite element program generator) by hole-to-surface resistivity method.Numerical solution was compared with analytical one for the homogeneity earth model.And a new parameter of deviation rate was proposed by analyzing different plot curves.The results show that the relative error of solution for homogeneity earth model may attain to 0.043%.And deviation rate decreases from 18% to 1% and its anomaly range becomes wide gradually when the depth of oil and gas reservoir increases from 200 to 1 500 m.If resistivity ratio of oil and gas reservoir to sur-rounding rock decreases from 100 to 10 for the resistive oil and gas reservoir,the amplitude attenuation of deviation rate nearly reaches 8%.When there exists stratum above oil and gas reservoir,and influence of resistive stratum may be eliminated or weakened and anomaly of oil and gas reservoir can be strengthened.

Saturation evaluation of microporous low resistivity carbonate oil pays in Rub Al Khali Basin in the Middle East

To solve the problem that it is difficult to identify carbonate low resistivity pays(LRPs) by conventional logging methods in the Rub Al Khali Basin, the Middle East, the variation of fluid distribution and rock conductivity during displacement were analyzed by displacement resistivity experiments simulating the process of reservoir formation and production, together with the data from thin sections, mercury injection and nuclear magnetic resonance experiments. In combination with geological understandings, the genetic mechanisms of LRPs were revealed, then the saturation interpretation model was selected, the variation laws and distribution range of the model parameters were defined, and finally an updated comprehensive saturation interpretation technique for the LRPs has been proposed. In the study area, the LRPs have resistivity values of less than 1 Ω·m, similar to or even slightly lower than that of the water layers. Geological research reveals that the LRPs were developed in low-energy depositional environment and their reservoir spaces are controlled by micro-scale pore throats, with an average radius of less than 0.7 μm, so they are typical microporous LRPs. Different from LRPs of sandstone and mudstone, they have less tortuous conductive paths than conventional reservoirs, and thus lower resistivity value under the same saturation. Archie’s formula is applicable to the saturation interpretation of LRPs with a cementation index value of 1.77-1.93 and a saturation index value of 1.82-2.03 that are 0.2-0.4 lower than conventional reservoirs respectively. By using interpretation parameters determined by classification statistics of petrophysical groups(PGs), oil saturations of the LRPs were calculated at bout 30%-50%,15% higher than the results by conventional methods, and basically consistent with the data of Dean Stark, RST, oil testing and production. The 15 wells of oil testing and production proved that the coincidence rate of saturation interpretation is over 90%and the feasibility of this method has been further verified.

Assessment of natural gas hydrate reservoirs at Site GMGS3-W19 in the Shenhu area,South China Sea based on various well logs

To obtain the characteristics of the gas hydrate reservoirs at GMGS3-W19,extensive geophysical logging data and cores were analyzed to assess the reservoir properties.Sediment porosities were estimated from density,neutron,and nuclear magnetic resonance(NMR)logs.Both the resistivity and NMR logs were used to calculate gas hydrate saturations,the Simandoux model was employed to eliminate the effects of high clay content determined based on the ECS and core data.The density porosity was closely in agreement with the core-derived porosity,and the neutron porosity was higher while the NMR porosity was lower than the density porosity of sediments without hydrates.The resistivity log has higher vertical resolution than the NMR log and thus is more favorable for assessing gas hydrate saturation with strong heterogeneity.For the gas hydrate reservoirs at GMGS3-W19,the porosity,gas hydrate saturation and free gas saturation was 52.7%,42.7%and 10%,on average,respectively.The various logs provide different methods for the comprehensive evaluation of hydrate reservoir,which supports the selection of candidate site for gas hydrate production testing.

A Study of Solid-Free Drilling Fluid for Tight Gas Reservoirs

This project is explaining a laboratory development of a solid free drilling fluid formula that could be potentially used in tight gas reservoirs. The configuration of the weak gel fluid WGL-1, which is resistant to high temperature and high salt, was tested, and concluded that its gelling properties, salt and temperature resistance, and environmental protection were all in line with industry requirements. The final drilling fluid formula was developed as: water + (0.3% ~ 0.5%) NaOH + 5% KCl + 2% WGL-1 + 5% NaCl + (1.0% ~ 2.0%) HBFR Anti-high temperature fluid loss agent + 2% Polyol + (1.5% ~ 2.0%) SDL-1 Lubricant + 0.4% A4O1. The performance of the liquid was tested for temperature resistance, inhibition, gas formation protection effect, plugging performance, and static settlement stability. It was concluded that the temperature resistance performance is satisfied at 150°C, and the cuttings recovery rate is as high as 96.78%. It has good performance in inhibiting water dispersion and swelling of cuttings. The permeability recovery value reaches 88.9%, which meets the requirements of gas formation protection. The SSSI value shows that its settlement stability is good;under high temperature and high pressure, its sealing performance is good. This drilling fluid system has achieved the expected results and laid a foundation for further promoting the development of solid-free drilling fluid systems. The future development direction of solid-free drilling fluids is pointed out, to the improvement of properties to be applied in high temperature environment and have high salt resistance capacity.

Progress and prospects of oil and gas production engineering technology in China

This paper summarizes the important progress in the field of oil and gas production engineering during the"Thirteenth Five-Year Plan"period of China,analyzes the challenges faced by the current oil and gas production engineering in terms of technological adaptability,digital construction,energy-saving and emission reduction,and points out the future development direction.During the"Thirteenth Five-Year Plan"period,series of important progresses have been made in five major technologies,including separated-layer injection,artificial lift,reservoir stimulation,gas well de-watering,and workover,which provide key technical support for continuous potential tapping of mature oilfields and profitable production of new oilfields.Under the current complex international political and economic situation,oil and gas production engineering is facing severe challenges in three aspects:technical difficulty increases in oil and gas production,insignificant improvements in digital transformation,and lack of core technical support for energy-saving and emission reduction.This paper establishes three major strategic directions and implementation paths,including oil stabilization and gas enhancement,digital transformation,and green and low-carbon development.Five key research areas are listed including fine separated-layer injection technology,high efficiency artificial lift technology,fine reservoir stimulation technology,long term gas well de-watering technology and intelligent workover technology,so as to provide engineering technical support for the transformation,upgrading and high-quality development of China’s oil and gas industry.

Formation conditions and accumulation characteristics of Bozhong 19-6 large condensate gas field in offshore Bohai Bay Basin

Based on the study of natural gas resource, low buried hill trap formation mechanism, high quality reservoir control factors and natural gas preservation conditions, the formation conditions and reservoir accumulation characteristics of Bozhong 19-6 large condensate gas field were summarized. Large gas generation potential of multiple sets of thick humic-sapropelic source rocks in high maturity stage in Bozhong depression was the basis of large gas field formation. The multi-stage tectonic evolution since Indosinian period formed large-scale buried hill traps. The Tanlu fault activity formed multi-type reservoirs, and buried hill metamorphic rock of Archean and sand-conglomerate of Kongdian Formation were high-quality reservoirs. Thick overpressure lacustrine mudstone and weak neotectonic movement provided good preservation conditions. Bozhong 19-6 gas reservoir was a condensate gas reservoir with very high condensate oil content, and the gas origin was humic-sapropelic and kerogen-cracking gas, and the gas field had large gas thickness, high gas column characteristics and the accumulation process was first oil and then gas. The buried hill reservoir was a massive reservoir and the Kongdian reservoir was a stratified reservoir. The gas field had multi-channel hydrocarbon intense charge from overpressure source rocks, atmospheric-weak overpressure reservoir favorable for accumulation, thick overpressure mudstone caprock favorable for preservation, and natural gas ultra-late rapid accumulation model.

Low resistivity oil(gas)-bearing reservoir conductive model——Dual water clay matrix conductive model in the north area of Tarim Basin, Xinjiang, China

Shaly sands reservoir is one of the most distributive types of the oil(gas)-bearing reservoirs discovered in China, and low resistivity oil(gas)-bearing reservoirs are mostly shaly sands reservoirs. Therefore, shaly sands reservoir conductive model is the key to evaluate low resistivity oil(gas)-bearing reservoirs using logging information. Some defects were found when we studied the clay distribution type conductive model, dual-water conductive model, conductive rock matrix model, etc. Some models could not distinguish the conductive path and nature of microporosity water and clay water and some models did not consider the clay distribution type and the mount of clay volume. So, we utilize the merits,overcome the defects of the above models, and put forward a new shaly sands conductive model-dual water clay matrix conductive model (DWCMCM) in which dual water is the free water and the microporosity water in shaly sands and the clay matrix(wet clay) is the clay grain containing water. DWCMCM is presented here, the advantages of which can tell the nature and conductive path from different water (microporosity water and freewater), in consid-eration of the clay distribution type and the mount of clay volume in shaly sands. So, the results of logging interpretation in the oil(gas)-bearing reservoirs in the north of Tarim Basin area, China with DWCMCM are better than those interpreted by the above models.

Exploration Technology for Complex Sandstone Reservoirs in the Developed Area of Shengli Oilfield

Jiyang depression, which is the main oil productive area of Shengli oil field, is located at the southeast part of the Bohai Bay Basin and is a terrestrial lacustrine rift subsidence basin formed in the late Mesozoic with fully developed fault system. The main hydrocarbon productive formations of this depression are the terrestrial clastic rocks of the Tertiary, which are of strong lateral variation. The complex fault reservoirs and subtle lithological reservoirs distributed extensively and are becoming the main exploration targets in recent years. The exploration and development practice in these years has formed the exploration technologies, mainly including detailed study and description of low grade faults, delineation of microstructures, facies constrained formation description and prediction and low resistivity oil bearing formation’s identification. These exploration technologies have resulted in remarkable effectiveness on the reserve and oil production increments.

奥连特盆地隐蔽油藏高效滚动勘探开发方法技术及应用——以厄瓜多尔14和17区块为例

厄瓜多尔14和17区块位于奥连特盆地前渊带,主要含油层系为Napo组的M1,U和T段。现已开发油田进入高含水阶段,资源接替面临挑战。通过基于趋势面驱动的叠后地震数据连片一致性处理、时-频衰减高精度合成记录标定和解释及各向异性变速成图,精细刻画了低幅度构造,发现了一批低幅度构造油藏。采用分频迭代去噪拾取薄层弱反射系数,以其重构的叠后宽频有效信号为约束,采用相控波形非线性反演,定量预测了埋深3 000 m的2~5 m厚潮汐水道砂岩,发现了多个M1超薄层岩性油藏。依据区域水动力条件、低幅度构造油藏油-水界面趋势及油藏能量特征,发现了LU水动力油藏并滚动扩边。通过观察大量岩心薄片,发现海绿石在石英砂岩储层中呈胶结物和颗粒两种赋存状态,建立了海绿石双组构测井解释体积模型,评价并识别了UT低电阻率油藏。基于热带雨林地表和隐蔽油藏特点,按照“整体部署、分批实施、跟踪评价、及时调整”的策略,实现滚动勘探、评价和快速建产,探井和评价井成功率大于90%。

高温中低渗油藏智能纳米黑卡驱提高采收率技术

当前化学驱储量接替严重不足,亟需攻关突破高温中低渗油藏提高采收率技术。智能纳米黑卡驱油技术是当下极具前瞻性的纳米驱油技术,可大幅度提高采收率。针对河南油田高温中低渗油藏,开展高温条件下纳米黑卡静态性能评价,并通过高温岩心驱替实验评价不同渗透率条件下智能纳米黑卡驱油效果。结果表明,智能纳米黑卡具有优异的耐高温性能,分散稳定性好,能够降低油水界面张力至10^(-1)mN/m,并具有改变润湿性和快速乳化与破乳性能。同时,纳米黑卡具有高效的洗油能力,在95℃下注入0.3 PV的质量分数为0.005%的智能纳米黑卡溶液,在目标油田不同渗透率(50×10^(-3)~450×10^(-3)μm^(2))条件下可提高采收率15.8百分点~20.0百分点。因此,智能纳米黑卡驱油技术适用于河南油田高温中低渗油藏提高采收率。

基于灰色关联度分析-极限学习机的低阻油层及水淹层测井识别——以渤海P区块馆陶组为例

历经近20的开发,渤海P区块进入高含水期,馆陶组发育的大量低阻油层与水淹层在测井曲线形态上差异不明显。为了精确进行水淹层识别以及水淹层等级划分,采用了机器学习算法。首先采用灰色关联度分析,筛选低阻油层和水淹层识别的敏感参数曲线;其次构建了极限学习机水淹层识别模型,对模型进行训练,获取最优参数。将其应用于实际资料处理,结果表明,基于灰色关联度分析极限学习机的低阻油层及水淹层测井识别方法对低阻油层与水淹层的预测精度较高,符合率达89.3%,远远优于未经过灰色关联度分析筛选的预测结果,具有实际应用价值。