Can near-to-mid Infrared Spectral Energy Distribution Quantitatively Trace Protoplanetary Disk Evolution?

Infrared(IR)spectral energy distribution(SED)is the major tracer of protoplanetary disks.It was recently proposed to use the near-to-mid IR(or K-24)SED slopeαdefined between 2 and 24μm as a potential quantitative tracer of disk age.We critically examine the viability of this idea and confront it with additional statistics of IR luminosities and SED shapes.We point out that,because the statistical properties of most of the complicated physical factors involved in disk evolution are still poorly understood in a quantitative sense,the only viable way is to assume them to be random so that an idealized“average disk”can be defined,which allows theαhistogram to trace its age.We confirm that the statistics of the zeroth order(luminosity),first order(slopeα),and second order characteristics(concavity)of the observed K-24 SEDs indeed carry useful information upon the evolutionary processes of the“average disk”.We also stress that intrinsic diversities in K-24 SED shapes and luminosities are always large at the level of individual stars so that the application of the evolutionary path of the“average disk”to individual stars must be done with care.The data of most curves in plots are provided on GitHub(Disk-age package https://github.com/starage/disk-age/).

Probing the Kinematic Signatures of Planet Formation in the Gas Disk of MWC 480

The disk around MWC 480 has shown multiple substructures in both dust and gas observations,possibly suggesting ongoing planet formation in situ.In this paper,we explore the gas kinematics of the MWC 480 disk by analyzing the archival Atacama Large Millimeter/submillimeter Array observations of^(12)CO(J=2-1),^(13)CO(J=2-1),and C^(18)O(J=2-1).By modeling the line-of-sight velocities,inferred from the Doppler shifts of the emission lines,we are able to decompose the three-dimensional(3D)velocity field of the disk into rotational,radial,and vertical components.Further analysis reveals the presence of large-scale gas flows in the(r,z)plane.Notably,we identify potential meridional flows across various heights as traced by all three CO isotopologues in the 80–120 au region,possibly associated with ongoing planet formation activities in this region.Moreover,we find upward flows near 200 au for all three CO isotopologues,which may point to the presence of disk winds.

Photocatalytic ozonation-based degradation of phenol by ZnO—TiO_(2)nanocomposites in spinning disk reactor

Spinning disk reactor(SDR)has emerged as a novel process intensification photocatalytic reactor,and it has higher mass transfer efficiency and photon utilization for the degradation of toxic organic pollutants by advanced oxidation processes(AOPs).In this study,ZnO—TiO_(2)nanocomposites were prepared by solgel method,and coated on the disk of SDR by impregnation-pull-drying-calcination method.The performance of catalyst was characterized by X-ray diffraction,scanning electron microscope,X-ray photoelectron spectroscopy,photoluminescence and ultraviolet—visible diffuse reflectance spectroscopy.Photocatalytic ozonation in SDR was used to remove phenol,and various factors on degradation effect were studied in detail.The results showed that the rate of degradation and mineralization reached 100%and 83.4%under UV light irradiation after 50 min,compared with photocatalysis and ozonation,the removal rate increased by 69.3%and 34.7%,and mineralization rate increased by 56.7%and 62.9%,which indicated that the coupling of photocatalysis and ozonation had a synergistic effect.The radical capture experiments demonstrated that the active species such as photogenerated holes(h^(+)),hydroxyl radicals(·OH),superoxide radical(·O_(2)-)were responsible for phenol degradation,and·OH played a leading role in the degradation process,while h+and·O_(2)^(-)played a non-leading role.

Effects of multiple shapes for steady flow with transformer oil+Fe_(3)O_(4)+TiO_(2) between two stretchable rotating disks

In this study,we examine the effects of various shapes of nanoparticles in a steady flow of hybrid nanofluids between two stretchable rotating disks.The steady flow of hybrid nanofluids with transformer oil as the base fluid and Fe_(3)O_(4)+TiO_(2)as the hybrid nanofluid is considered.Several shapes of Fe_(3)O_(4)+TiO_(2)hybrid nanofluids,including sphere,brick,blade,cylinder,and platelet,are studied.Every shape exists in the same volume of a nanoparticle.The leading equations(partial differential equations(PDEs))are transformed to the nonlinear ordinary differential equations(ODEs)with the help of similarity transformations.The system of equations takes the form of ODEs depending on the boundary conditions,whose solutions are computed numerically by the bvp4c MATLAB solver.The outputs are compared with the previous findings,and an intriguing pattern is discovered,such that the tangential velocity is increased for the rotation parameter,while it is decreased by the stretching values because of the lower disk.For the reaction rate parameter,the concentration boundary layer becomes shorter,and the activation energy component increases the rate at which mass transfers come to the higher disk but have the opposite effect on the bottom disk.The ranges of various parameters taken into account are Pr=6.2,Re=2,M=1.0,φ_(1)=φ_(2)=0.03,K=0.5,S=-0.1,Br=0.3,Sc=2.0,α_(1)=0.2,γ=0.1,E_(n)=2.0,and q=1.0,and the rotation factor K is within the range of 0 to 1.

An Asymmetric Galactic Stellar Disk Traced by OB-type Stars from LAMOST DR7

Using 9943 OB-type stars from LAMOST DR7 in the solar neighborhood,we fit the vertical stellar density profile with the model including a single exponential distribution at different positions(R,Φ).The distributions of the scale heights and scale length show that the young disk traced by the OB-type stars is not axisymmetric.The scale length decreases versus the azimuthal angleΦ,i.e.,from.■kpc withΦ=-3°to■kpc withΦ=9°.Meanwhile we find signal of non-symmetry in the distribution of the scale height of the north and south of the disk plane.The scale height in the north side shows signal of flaring of the disk,while that of the south disk stays almost constant around h_(s)=130 pc.The distribution of the displaceeent of the disk plane Z_(0)also shows variance versus the azimuthal angleΦ,which displays significant differences with the warp model constrained by the Cepheid stars.We also test different values for the position of the Sun,and the distance between the Sun and the Galactic center affects the scale heights and the displacement of the disk significantly,but that does not change our conclusion that the disk is not axisymmetric.

Analyzing Thermal Stratification and Nanoparticle Shapes Influence on an EMHD Ternary Nanofluid Flow amidst Two Spinning Disks

The present study examines the thermal distribution of ternary nanofluid flow amid two spinning disks influenced by electric and magnetic fields. Keeping in view the shape of the particles, the electrically conducting ternary nanofluid is analyzed with variable thermophysical features. Three types of nanoparticles namely Copper, Aluminum Oxide, and Graphene with spherical, cylindrical, and platelet shapes are taken respectively and are immersed in a (50-50)% ratio of water and ethylene glycol mixture which acts as a base fluid. The anticipated problem is addressed by employing a reliable and user-friendly numerical bvp4c built-in collocation scheme. This solution is then showcased through illustrations and tables. Strengthening the radiation results in an enhanced heat transfer rate. Radial and azimuthal velocities once rotation of disks is enhanced. The key findings provide a strong theoretical background in photovoltaic cells, solar collectors, radiators, solar water heaters, and many other applications.

DRX rules during extrusion process of large-scale thick-walled Inconel 625 pipe by FE method

A thermal-mechanical and micro-macro coupled finite element（FE） model for the hot extrusion process of large-scale thick-walled Inconel 625 pipe was developed based on the DEFORM-2D platform.Then,the influence rules of the key extrusion parameters on the average grain size and grain uniformity of the extruded pipe were revealed.The results show that with the increase of initial billet temperature,extrusion speed and friction coefficient,the grain uniformity is firstly improved and then deteriorated.Larger extrusion ratio leads to more uniform grain distribution.With the increase of initial billet temperature,the average grain size of the pipe first decreases and then increases.Additionally,larger extrusion ratio can bring smaller average grain size.The extrusion speed and friction coefficient have slight effects on the average grain size of the extruded pipe.

Numerical Simulation and Experimental Research on Microstructural Evolution During Compact Hot Extrusion of Heavy Caliber Thick-Wall Pipe

Compact hot extrusion(CHE) process of heavy caliber thick-wall pipe is a new material-saving production process. In order to reveal the optimum hot extrusion parameters in CHE process, the e ects of the extrusion parameters on the microstructural evolution are investigated systematically. The metadynamic recrystallization(MDRX) kinetic models and grain size models of as-cast P91 steel are established for the first time according to the hot compression tests performed on the Gleeble-3500 thermal-simulation machine. Then a thermal-mechanical and micro-macro coupled hot extrusion finite element(FE) model is established and further developed in DEFORM software. The results indicated that the grain size of the extruded pipe increases with the increasing of initial temperature and extrusion speed, decreases when extrusion ratio increases. Moreover, the grain size is more sensitive to the initial temperature and the extrusion ratio. The optimum hot extrusion parameters are including that, the initial extrusion temperature of 1250 °C, the extrusion ratio of 9 and the extrusion speed of 50 mm/s. Furthermore, in order to verify the simulation precisions, hot extrusion experiment verification on the heavy caliber thick-wall pipe is carried out on the 500 MN vertical hot extrusion equipment. The load–displacement curve of the extrusion process and the grain sizes of the middle part extruded pipe are in good accuracy with the simulation results, which confirms that the hot extrusion FE models of as-cast P91 steel could estimate the hot extrusion behaviors. The proposed hot extrusion FE model can be used to guide the industrial production research of CHE process.

Thermo-magnetic analysis of thick-walled spherical pressure vessels made of functionally graded materials

This study presents an analytical solution of thermal and mechanical displacements, strains, and stresses for a thick-walled rotating spherical pressure vessel made of functionally graded materials (FGMs). The pressure vessel is subject to axisymmetric mechanical and thermal loadings within a uniform magnetic field. The material properties of the FGM are considered as the power-law distribution along the thickness. Navier’s equation, which is a second-order ordinary differential equation, is derived from the mechanical equilibrium equation with the consideration of the thermal stresses and the Lorentz force resulting from the magnetic field. The distributions of the displacement, strains, and stresses are determined by the exact solution to Navier’s equation. Numerical results clarify the influence of the thermal loading, magnetic field, non-homogeneity constant, internal pressure, and angular velocity on the magneto-thermo-elastic response of the functionally graded spherical vessel. It is observed that these parameters have remarkable effects on the distributions of radial displacement, radial and circumferential strains, and radial and circumferential stresses.

Stress analytical solution for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform distributed pressure

The stress state around circular openings,such as boreholes,shafts,and tunnels,is usually needed to be evaluated.Solutions for stresses,strains and ultimate bearing capacities of pressurized hollow cylinder are common cases.Stress analytical method for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform pressure on the outer surface and uniform radial pressure on the inner surface is given.The power series method of complex function is used.The stress analytical solution is obtained with the assumption that two layers of a cylinder are fully contacted.The distributions of normal and tangential contact stress along the interface,tangential stress on the inner boundary and stresses in the radial direction at θ=0°,45° and 90°,are obtained.An example indicates that,when the elastic modulus of the inner layer of a double-layered thick-walled cylinder is smaller than that of the outer layer,the tangential stress is smaller than that in the corresponding point for a traditional cylinder composed of homogeneous materials.In that way,stress concentration at the inner surface can be alleviated and the stress distribution is more uniform.This is a capable way to enhance the elastic ultimate bearing capacity of thick-walled cylinder.

Limit analysis of viscoplastic thick-walled cylinder and spherical shell under internal pressure using a strain gradient plasticity theory

Plastic limit load of viscoplastic thick-walled cylinder and spherical shell subjected to internal pressure is investigated analytically using a strain gradient plasticity theory. As a result, the current solutions can capture the size effect at the micron scale. Numerical results show that the smaller the inner radius of the cylinder or spherical shell, the more significant the scale effects. Results also show that the size effect is more evident with increasing strain or strain-rate sensitivity index. The classical plastic-based solutions of the same problems are shown to be a special case of the present solution.

Simulation on flow, heat transfer and stress characteristics of large-diameter thick-walled gas cylinders in quenching process under different water spray volumes

Cooling strength is one of the important factors affecting microstructure and properties of gas cylinders during quenching process,and reasonable water spray volume can effectively improve the quality of gas cylinders and reduce production costs.To find the optimal water spray parameters,a fluid-solid coupling model with three-phase flow was established in consideration of water-vapor conversion.The inner and outer walls of gas cylinder with the dimensions of d914 mm×38 mm×12000 mm were quenched using multi-nozzle water spray system.The internal pressure,average heat transfer coefficient(have)and stress of the gas cylinder under different water spray volumes during quenching process were studied.Finally,the mathematical model was experimentally verified.The results show that both the internal pressure and have increase along with the increase of spray volume.The internal pressure increases slowly first and then rapidly,but have increases rapidly first and then slowly.To satisfy hardenability of gas cylinders,the minimum spray volume should not be less than 40 m^3/(h·m).The results of stress indicate that water spray quenching will not cause deformation of bottle body in the range of water volume from 40 to 290 m^3/(h·m).

Reduction of the residual stresses in cold expanded thick-walled cylinders by plastic compression

We suppose that in order to maintain high accuracy of holes and to lower residual stresses after cold expansion of thick-walled cylinders, which undergo cross-section plastic deformation, it is necessary to perform axial plastic compression and subsequent cold expansion with small interferences. To test this hypothesis, we studied hoop, radial and axial residual stresses in cylinders made of carbon steel AISI 1050 with hole diameter of 5 mm, outer diameter of 15 mm and length of 30 mm by Sachs method as well as accuracy of expanded holes. It is found that double cold expansion with total interference equal to 5.1% generates hoop residual stresses with largest absolute value equal to 284 MPa and ensures high holes accuracy(IT7). After plastic compression with strain equal to 0.5 and 1% the mentioned stresses reduced to 120 and 75 MPa respectively,and accuracy of the holes reduced as well. Subsequent cold expansion with small interference equal to 0.9% helps to restore holes accuracy(IT7)gained by double cold expansion and ensure that absolute value of hoop residual stresses(177 MPa) is lower compared to double cold expansion.

A borehole stability study by newly designed laboratory tests on thick-walled hollow cylinders

At several mineral exploration drilling sites in Australia, weakly consolidated formations mainly consistof sand particles that are poorly bonded by cementing agents such as clay, iron oxide cement or calcite.These formations are being encountered when drilling boreholes to the depth of up to 2 0 0 m. To studythe behaviour of these materials, thick-walled hollow cylinder （TWHC） and solid cylindrical syntheticspecimens were designed and prepared by adding Portland cement and water to sand grains. The effectsof different parameters such as water and cement contents, grain size distribution and mixture curingtime on the characteristics of the samples were studied to identify the mixture closely resembling theformation at the drilling site. The Hoek triaxia! cell was modified to allow the visual monitoring of graindebonding and borehole breakout processes during the laboratory tests. The results showed the significanceof real-time visual monitoring in determining the initiation of the borehole breakout. The sizescaleeffect study on TWHC specimens revealed that with the increasing borehole size, the ductility ofthe specimen decreases, however, the axial and lateral stiffnesses of the TWHC specimen remain unchanged.Under different confining pressures the lateral strain at the initiation point of boreholebreakout is considerably lower in a larger size borehole （2 0 mm） compared to that in a smaller one（10 mm）. Also, it was observed that the level of peak strength increment in TWHC specimens decreaseswith the increasing confining pressure.

Revisiting the elastic solution for an inner-pressured functionally graded thick-walled tube within a uniform magnetic field

In this paper, the mechanical responses of a thick-walled functionally graded hollow cylinder subject to a uniform magnetic field and inner-pressurized loads are studied. Rather than directly assume the material constants as some specific function forms displayed in pre-studies, we firstly give the volume fractions of different constituents of the functionally graded material(FGM) cylinder and then determine the expressions of the material constants. With the use of the Voigt method, the corresponding analytical solutions of displacements in the radial direction, the strain and stress components, and the perturbation magnetic field vector are derived. In the numerical part, the effects of the volume fraction on the displacement, strain and stress components, and the magnetic perturbation field vector are investigated. Moreover, by some appropriate choices of the material constants, we find that the obtained results in this paper can reduce to some special cases given in the previous studies.

Ringlike failure experiment of thick-walled limestone cylinder specimens in triaxial unloading tests

In order to study the failure of surrounding rock under high in situ stress in deep underground engineering projects, disturbed by excavation unloading, we carried out triaxial unloading experiments using thickwalled cylinder specimens on a TATW-2000 rock servo-controlled triaxial testing machine in a laboratory. The specimens were made of limestone material, taken from Tongshan county, Xuzhou city, Jiangsu province, China. In our experiments, rock deformation and failure behavior was studied through loading and unloading of inner hole pressure of thick-walled cylinder specimens. At first, the axial stress, confining pressure and inner pressure were increased simultaneously to a specified designed state of stress. Then, keeping the axial stress and confining pressure stable, the pressure on the inner hole was decreased until the specimen was fractured. When the inner pressure was released completely but the specimen did not fracture, the confining pressure was decreased subsequently until complete failure occurred. Our experimental results suggest that traces of major circular ringlike fractures with a number of radial cracks often appear in thick cylinder walls. This type of ringlike failure phenomenon, similar to intermittent zonal fracturing characteristics of deep exploitation, has, so far, not been published. Our experimental results show that rock deformation and failure behavior of thick-walled limestone cylinders vary under different stress paths between loading and unloading. Tensile failure and orderly failure surfaces occur under unloading conditions while irregular damaged rock blocks are produced during loading failure. This type of triaxial unloading experiment provides for new research methodology and approach for thorough investigations on intermittent zonal fracturing in deep underground excavations.

Analysis of dynamic stress intensity factors of thick-walled cylinder under internal impulsive pressure

Dynamic stress intensity factors are evaluated for thick-walled cylinder with a radial edge crack under internal impulsive pressure. Firstly, the equation for stress intensity factors under static uniform pressure is used as the reference case, and then the weight function for a thick-walled cylinder containing a radial edge crack can be worked out. Secondly, the dynamic stresses in uncracked thick-walled cylinders are solved under internal impulsive pressure by using mode shape function method. The solution consists of a quasi-static solution satisfying inhomogeneous boundary conditions and a dynamic solution satisfying homogeneous boundary condi- tions, and the history and distribution of dynamic stresses in thick-walled cylinders are derived in terms of Fourier-Bessel series. Finally, the dynamic stress intensity factor equations for thick-walled cylinder containing a radial edge crack sub- jected to internal impulsive pressure are given by dynamic weight function method. The finite element method is utilized to verify the results of numerical examples, showing the validity and feasibility of the proposed method.

Stress and buckling analysis of a thick-walled micro sandwich panel with a flexible foam core and carbon nanotube reinforced composite (CNTRC) face sheets

In this paper,the stresses and buckling behaviors of a thick-walled mi-cro sandwich panel with a flexible foam core and carbon nanotube reinforced composite(CNTRC)face sheets are considered based on the high-order shear deformation theory(HSDT)and the modified couple stress theory(MCST).The governing equations of equi-librium are obtained based on the total potential energy principle.The effects of various parameters such as the aspect ratio,elastic foundation,temperature changes,and volume fraction of the canbon nanotubes(CNTs)on the critical buckling loads,normal stress,shear stress,and deflection of the thick-walled micro cylindrical sandwich panel consider-ing different distributions of CNTs are examined.The results are compared and validated with other studies,and showing an excellent compatibility.CNTs have become very use-ful and common candidates in sandwich structures,and they have been extensively used in many applications including nanotechnology,aerospace,and micro-structures.This paper also extends further applications of reinforced sandwich panels by providing the modified equations and formulae.

Effect of sodium modification on microstructure and mechanical properties of thick-walled AlSi6Cu2.5 rheocast component

The microstructure and tensile properties were investigated in a thick-walled section （approximately 45 mm×43 mm） of a rheocast component produced by the RheoMetalTM process. Due to the long solidification period of such components, it is expected that the A1-Si eutectic formed will be coarse. Therefore, sodium （Na） was used as a modifying agent to reduce the coarseness of the eutectic. Tensile test bars were machined from three different sets of materials： 1） non-modified melt, 2） modified melt cast directly after Na addition, and 3） modified melt cast 30 min after Na addition. The alloy used was a secondary AlSi6Cu2.5 alloy （STENAL Rheol）, specially developed for rheocasting. The material was studied in the as-cast condition as well as after a T6 heat treatment. The results show that the Al-Si eutectic is significantly refined by the Na addition, even after a fading time of 30 min. However, it is observed that the Na modification generally has a detrimental effect on the mechanical properties, despite the structure refinement. This is especially true in the T6 heat treated condition, where the yield strength is reduced by more than 30%. Some possible mechanisms for the degradation of mechanical performance are discussed.

ELASTOPLASTIC ANALYSIS OF THICK-WALLCYLINDER CONSIDERING THE MATERIAL'S DILATANCY CHARACTER

Impermeable bentonite or its mixtures have been proposed as candidate materials to be used in the geotechnical disposal of radioactive nuclear waste. These materials are filled in the space between a canister containing radioactive nuclear waste and an underground chamber to absorb the radionuclide emitting from the canister and simultaneously retard its migration accompanying the perrneation of underground water to prevent the surrounding environment from po1lution. On the basis of the established elastoplastic strain-hardening mechanical model considering the material’s dilatancy character,the authors carry out the stress-strain analysis of a thick-wa1l cylinder in a plane strain state subJected to a pressure difference between internal and external pressures. The analysis may be expected to be a theoretical basis for developing a coupled shear and permeability test apparatus for conducting a permeability test along a sheared plane in a specimen. The apparatus will be used to study the effects of shear strain on the variation of geotechnical materials’ permeability coefficient in order to evaluate the influence of shear strain caused by nonuniform deformation and/or earthquake on the long-term safety of the disposal system of radioactive nuclear waste. The theoretlcal analysls methods in this paper can be directly spread to the analysis of the deformation and stability of tunnels or roadways driven in soft soils or high moisture-bearing soft rocks.