Polypropylene(PP)grease holds great potential for special industrial applications.In this study,synthetic conditions,thickener content,and the ratio of two different molecular weight PPs were investigated systematical...Polypropylene(PP)grease holds great potential for special industrial applications.In this study,synthetic conditions,thickener content,and the ratio of two different molecular weight PPs were investigated systematically using a rheometer,scanning electron microscope,X-ray diffraction,Fourier transform infrared spectrometer,oscillating tribometer,and 3D surface profiler measurements.The results showed that suitable synthetic conditions are two quenching cycles,and the synthetic temperature and time is 240℃for 12 h.The rheological analysis showed that thickener content and different proportions of the two PP molecular weights have a significant influence on the rheological properties of PP grease.High molecular weight PP(H-PP)has a stronger thickening ability than low molecular weight PP(L-PP).The higher the amount of H-PP in the fixed thickener content or the higher the thickener content with a specific proportion,the higher the viscoelasticity of PP grease.The tribological performance is related to the rheological properties.The proportion of two different molecular weight PPs in the thickener content should be appropriate;excessive H-PP content leads to lubrication failure.展开更多
Purpose: The present research was performed to evaluate the effect of food thickeners on the bitterness and dissolution of bitter drugs when co-administered to patients with dysphagia. Methods: Amlodipine besilate (AM...Purpose: The present research was performed to evaluate the effect of food thickeners on the bitterness and dissolution of bitter drugs when co-administered to patients with dysphagia. Methods: Amlodipine besilate (AMPB) powder was used as a model drug. Starch- and xanthan gum-based food thickeners were examined, with swallowing-aid jelly as a reference. The line-spread test (LST), texture prolife analysis (TPA) were done firstly. In related to AMPB powder mixed with food thickeners solution, a conventional dissolution test simulating the oral cavity was performed, the amlodipine (AMP) concentration and taste sensor output for dissolved medium versus time profiles were developed. The dissolution test at pH 1.2 and 4.5, representing typical gastric conditions for younger or elderly people, was performed in two kinds of thickener solution and swallowing-aid jelly those were mixed with AMPB powder. Results: LST demonstrated that xanthan gum-based food thickeners fulfilled the requirements for patients with dysphagia but that starch-based food thickeners did not. In TPA, hardness and adhesiveness decreased proportionally as the concentration increased for both kinds of food thickener. Conventional dissolution test simulating oral cavity demonstrated the following bitterness ranking: xanthan gum-based food thickener Conclusion: Although xanthan gum-based food thickeners were successful in masking the bitterness of AMP, they may reduce its bioavailability in humans. The 7.1 and 4.7 (w/v) % starch-based thickener show bitterness inhibition under simulated oral cavity conditions and complete dissolution of AMP under simulated gastric conditions.展开更多
The purpose of this research was to evaluate the effect of starch- and xanthan gum-based food thickeners on the bitterness and dissolution of amlodipine besilate (AMPB) loaded orally disintegrating tablets (ODT) for p...The purpose of this research was to evaluate the effect of starch- and xanthan gum-based food thickeners on the bitterness and dissolution of amlodipine besilate (AMPB) loaded orally disintegrating tablets (ODT) for potential use with patients with dysphagia. A conventional dissolution test simulating the oral cavity was performed and the taste sensor output of the dissolved sample was evaluated over a 60-seconds period. When four types of AMPB loaded ODTs were tested alone, at 60 seconds, branded product (A) was the least bitter, followed by generic product (B)/generic product (C) which were equal, and finally generic product (D) which was the most bitter. Inhibition of bitterness of AMPB loaded ODTs mixed thickeners, 1.0 (w/v) % xanthan gum-based food thickener solution was significantly strong. The 7.1 (w/v) % and 4.7 (w/v) % starch-based food thickeners solution also effective in bitterness inhibition compared to the 2.4 (w/v) % starch-based food thickener solution. The dissolution test under pH 1.2 in related to 7.1 (w/v) % and 4.7 (w/v) % starch-based thickener contained each of AMPB loaded ODTs were associated with an almost complete amlodipine (AMP) dissolution (almost 90% at 10 minutes), whereas the 1.0, 2.0, 3.0 (w/v) % xanthan gum-based food thickener solution containing AMPB loaded ODTs did not show complete AMP dissolution and there were large variations in the initial dissolution stage. This suggests that a mixture of xanthan gum-based thickener and AMPB loaded ODT poses a risk of reduction of bioavailability. In conclusion, a mixture of 4.7 (w/v) % or 7.1 (w/v) % starch-based thickener with ODTs provides complete release of AMP and superior bitterness inhibition, so is the best choice for administration to patients with dysphagia.展开更多
Thickeners are important units for water recovery in various industries. In this study, a semi-industrial pilot plant thickener similar to the tailing thickener of the Sarcheshmeh Copper Mine was simulated by CFD mode...Thickeners are important units for water recovery in various industries. In this study, a semi-industrial pilot plant thickener similar to the tailing thickener of the Sarcheshmeh Copper Mine was simulated by CFD modeling. The population balance was used to describe the particle aggregation and breakup. In this population balance, 15 particle sizes categories were considered. The Eulerian-Eulerian approach with standard k-e turbulence model was applied to describe two phases of slurry flow in the thickener under steady-state condition. The simulation results have been compared with the experimental measurements to validate the accuracy of the CFD modeling. After checking the numerical results, the effect of important parameters such as, feed flow rate, solid percentage in the feed, and solid particle size on the thickener performance was studied. The thickener residence time distribution were obtained by the modeling and also compared with the experimental data. Finally, the effects of feedwell feeding on the average diameter of aggregate and turbulent intensity were evaluated.展开更多
Separation of particles from liquid in the large gravitational tanks is widely used in mining and industrial wastewater treatment process.Thickener is key unit in the operational processes of hydrometallurgy and is us...Separation of particles from liquid in the large gravitational tanks is widely used in mining and industrial wastewater treatment process.Thickener is key unit in the operational processes of hydrometallurgy and is used to separate solid from liquid.In this study,population balance models were combined with computational fluid dynamics(CFD)for modeling the tailing thickener.Parameters such as feed flow rate,flocculant dosage,inlet solid percent and feedwell were investigated.CFD was used to simulate the industrial tailing thickener with settled bed of 120 m diameter which is located in the Sarcheshmeh copper mine.Important factor of drag force that defines the rake torque of rotating paddles on the bed was also determined.Two phases turbulence model of Eulerian/Eulerian in accordance with turbulence model ofκ-ε.was used in the steady-state.Also population balance model consists of 15 groups of particle sizes with Luo and Lehr kernel was used for aggregation/breakage kernel.The simulation results showed good agreement with the operational data.展开更多
The trouble-free and efficient operation of paste thickeners requires an optimal design and the cooperation of each component.When underflow discharging is suspended,alleviating the vast torque that the remaining soli...The trouble-free and efficient operation of paste thickeners requires an optimal design and the cooperation of each component.When underflow discharging is suspended,alleviating the vast torque that the remaining solids within the thickeners may place on rakes mainly lies in the circulation unit.The mechanism of this unit was analyzed,and a mathematical model was developed to describe the changes in underflow solid content and yield stress.The key parameters of the circulation unit,namely,the height and flow rate,were varied to test its performance in the experiments with a self-designed laboratorial thickening system.Results show that the circulation unit is valid in reducing underflow solid fraction and yield stress to a reasonable extent,and the model could be used to describe its efficiency at different heights and flow rates.A suitable design and application of the circulation unit contributes to a cost-effective operation of paste thickeners.展开更多
Alkali-soluble associative latex thickeners modified with hydrophobic long chain alkyl groups were prepared using common acrylics and varying amount of a functional monomer,ethoxylated behenyl methacrylate(BEM),throug...Alkali-soluble associative latex thickeners modified with hydrophobic long chain alkyl groups were prepared using common acrylics and varying amount of a functional monomer,ethoxylated behenyl methacrylate(BEM),through emulsion polymerization.It was found that the size of the emulsion particle became larger with addition of BEM.The light transmittance of the thickener latex sharply increased with pH varied from 6 to 7.The associative latex thickener manifested a higher viscosity when solids in the latex thickeners were kept at 0.5 wt%or higher,and the optimal amount of BEM was found to be around 2.5 wt%,or 0.16 mol%.All thickener latexes modified with BEM have better shearing resistance than the BEM-free thickener.展开更多
This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a l...This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.展开更多
The phenomenological theory of sedimentation-thickening processes predicts the settling behavior of a flocculated suspension in dependence of two functions, the batch flux density function and the effective solid stre...The phenomenological theory of sedimentation-thickening processes predicts the settling behavior of a flocculated suspension in dependence of two functions, the batch flux density function and the effective solid stress. These functions were determined using batch settling tests. The governing equations for sedimentation were then solved numerically for these functions and the predictions were compared to the experimental results from pilot scale thickener tests. Firstly, the continuous tests were performed in the plexiglass pilot thickener at different feed flow rates and discharge rates and the solid volume fraction of discharge, the bed height and the time were recorded for each condition. These tests were also simulated and it was observed that there is a good agreement between the results of continuous tests and the results of dynamic simulation. Secondly, the discontinuous tests were performed in the plexiglass pilot thickener at different feed flow rates with a discharge rate of zero. The bed formation rate was determined for each condition. These tests were also simulated and it was observed that there is a good agreement between the results of discontinuous tests and the results of simulation.展开更多
It is crucial to predict the outputs of a thickening system,including the underflow concentration(UC)and mud pressure,for optimal control of the process.The proliferation of industrial sensors and the availability of ...It is crucial to predict the outputs of a thickening system,including the underflow concentration(UC)and mud pressure,for optimal control of the process.The proliferation of industrial sensors and the availability of thickening-system data make this possible.However,the unique properties of thickening systems,such as the non-linearities,long-time delays,partially observed data,and continuous time evolution pose challenges on building data-driven predictive models.To address the above challenges,we establish an integrated,deep-learning,continuous time network structure that consists of a sequential encoder,a state decoder,and a derivative module to learn the deterministic state space model from thickening systems.Using a case study,we examine our methods with a tailing thickener manufactured by the FLSmidth installed with massive sensors and obtain extensive experimental results.The results demonstrate that the proposed continuous-time model with the sequential encoder achieves better prediction performances than the existing discrete-time models and reduces the negative effects from long time delays by extracting features from historical system trajectories.The proposed method also demonstrates outstanding performances for both short and long term prediction tasks with the two proposed derivative types.展开更多
Dynamic simulation approach can be used for understanding the nonlinear behavior in mineral processing circuits. In this study, the gel point, the main parameters of batch flux density function and the main parameters...Dynamic simulation approach can be used for understanding the nonlinear behavior in mineral processing circuits. In this study, the gel point, the main parameters of batch flux density function and the main parameters of effective solid stress were determined at different conditions (pH, flocculant dosage and particle size). Therefore, the main parameters of phenome no logical model of sedimentation and thickening were determined as a functio n of particle size, pH and flocculant dosages using the result of experimental tests and Curve expert professional software. Then, the dynamic simulation was carried out for the industrial thickener of coal washing plant and the time-dependent variation of response variables was investigated by time-dependent variation of pH of input feed to thickener using the obtained equations. It was observed that it is possible to predict the thickener behavior as a function of time for time dependent variation of pH of input feed to the thickener of coal washing plant using obtained equations that it was not possible using phenomenological model of thickener alone.展开更多
Hydroxypropyl methylcellulose (HPMC) and amphoteric polyacrylamide (ACPAM) were respectively used to prepare engineered cementitious composite (ECC) which exhibits strain-hardening behavior under uniaxial tensio...Hydroxypropyl methylcellulose (HPMC) and amphoteric polyacrylamide (ACPAM) were respectively used to prepare engineered cementitious composite (ECC) which exhibits strain-hardening behavior under uniaxial tension. The connections between cement paste structure and the performance of the composite in fresh and hardened state were investigated, aiming at achieving the desirable workability at a given solids concentration. The experimental results of viscosity and miCrostructure of cement pastes show that the intimate connections between flocculation groups lead to the growing increase in viscosity. The results of deformability and fiber dispersion demonstrate that fiber dispersion coefficient is a comprehensive index which can reflect the performance of deformability as well as uniformity. And the desirable fresh mixture can be achieved by optimizing the viscosity of cement paste. At last, the ductile strain-hardening performance of the ECC prepared with HPMC or ACPAM was investigated through uniaxial tensile test.展开更多
Higher concentration is beneficial for the Paste and Thickened Tailings(PTT)operation in metal mine.Partial paste thickeners are produced lower density underflow.Flocculated tailings are intended to form a water entra...Higher concentration is beneficial for the Paste and Thickened Tailings(PTT)operation in metal mine.Partial paste thickeners are produced lower density underflow.Flocculated tailings are intended to form a water entrapped network structure in thickener,which is detrimental to underflow concentration.In this study,the continuous thickening experiment was carried out for ultra-fine tungsten tailings to study the influence of rake shearing on underflow.The micro pores structure and seepage flow in tailings bed before and after shearing are studied by CT and simulation approach to reveal the shearing enhancement mechanism of thickening process.The results shown that,the underflow concentration is increased from 61.4 wt%to 69.6 wt%by rake shearing in a pilot scale thickener,the porosity decreased from 46.48%to 37.46%.The entrapped water discharged from sticks structure more than sphere spaces.In items of seepage,after shearing,the seepage flow channel of tailings underflow is becoming longer,which caused the decreasing average flow rate decreases and absolute permeability.The absolute permeability is negatively correlated with tortuosity.The rake shearing can destroy the flocs structure;change the effective stress to increase the concentration.Higher underflow concentration improves the waste recycling and water recovery rate,especially for arid areas.展开更多
Cotton is one of the most important economic crops in the world,and it is a major source of fiber in the textile industry.Strigolactones(SLs)are a class of carotenoid-derived plant hormones involved in many processes ...Cotton is one of the most important economic crops in the world,and it is a major source of fiber in the textile industry.Strigolactones(SLs)are a class of carotenoid-derived plant hormones involved in many processes of plant growth and development,although the functions of SL in fiber development remain largely unknown.Here,we found that the endogenous SLs were significantly higher in fibers at 20 days post-anthesis(DPA).Exogenous SLs significantly increased fiber length and cell wall thickness.Furthermore,we cloned three key SL biosynthetic genes,namely GhD27,GhMAX3,and GhMAX4,which were highly expressed in fibers,and subcellular localization analyses revealed that GhD27,GhMAX3,and GhMAX4 were localized in the chloroplast.The exogenous expression of GhD27,GhMAX3,and GhMAX4 complemented the physiological phenotypes of d27,max3,and max4 mutations in Arabidopsis,respectively.Knockdown of GhD27,GhMAX3,and GhMAX4 in cotton resulted in increased numbers of axillary buds and leaves,reduced fiber length,and significantly reduced fiber thickness.These findings revealed that SLs participate in plant growth,fiber elongation,and secondary cell wall formation in cotton.These results provide new and effective genetic resources for improving cotton fiber yield and plant architecture.展开更多
Cemented paste backfill(CPB)is a key technology for green mining in metal mines,in which tailings thickening comprises the primary link of CPB technology.However,difficult flocculation and substandard concentrations o...Cemented paste backfill(CPB)is a key technology for green mining in metal mines,in which tailings thickening comprises the primary link of CPB technology.However,difficult flocculation and substandard concentrations of thickened tailings often occur.The rheological properties and concentration evolution in the thickened tailings remain unclear.Moreover,traditional indoor thickening experiments have yet to quantitatively characterize their rheological properties.An experiment of flocculation condition optimization based on the Box-Behnken design(BBD)was performed in the study,and the two response values were investigated:concentration and the mean weighted chord length(MWCL)of flocs.Thus,optimal flocculation conditions were obtained.In addition,the rheological properties and concentration evolution of different flocculant dosages and ultrafine tailing contents under shear,compression,and compression-shear coupling experimental conditions were tested and compared.The results show that the shear yield stress under compression and compression-shear coupling increases with the growth of compressive yield stress,while the shear yield stress increases slightly under shear.The order of shear yield stress from low to high under different thickening conditions is shear,compression,and compression-shear coupling.Under compression and compression-shear coupling,the concentration first rapidly increases with the growth of compressive yield stress and then slowly increases,while concentration increases slightly under shear.The order of concentration from low to high under different thickening conditions is shear,compression,and compression-shear coupling.Finally,the evolution mechanism of the flocs and drainage channels during the thickening of the thickened tailings under different experimental conditions was revealed.展开更多
Water spewing and muck plugging often occur during earth pressure balance(EPB)shield machines tunnelling in water-rich sandy strata,even though the conventional foam has been employed to condition sandy soils.In this ...Water spewing and muck plugging often occur during earth pressure balance(EPB)shield machines tunnelling in water-rich sandy strata,even though the conventional foam has been employed to condition sandy soils.In this study,a novel thickened foaming agent suitable for EPB shield tunnelling in water-rich sandy strata is developed.In contrast to conventional foam-conditioned sands,the thickened foam-conditioned sand has a low permeability due to the consistent filling of soil pores with the thickened foam,and the initial permeability coefficient decreases by approximately two orders of magnitude.It also exhibits a suitable workability,which is attributed to the enhanced capability of the thickened foam to condition sandy soils.In addition,the effect of concentration on the stability of the foam is explained by the Gibbs-Marangoni effect,and conditioning mechanisms for the thickened foam on sands are discussed from the evolution of foam bubbles.展开更多
Electric vehicles(EVs)have garnered significant attention as a vital driver of economic growth and environmental sustainability.Nevertheless,ensuring the safety of high-energy batteries is now a top priority that cann...Electric vehicles(EVs)have garnered significant attention as a vital driver of economic growth and environmental sustainability.Nevertheless,ensuring the safety of high-energy batteries is now a top priority that cannot be overlooked during large-scale applications.This paper proposes an innovative active protection and cooling integrated battery module using smart materials,magneto-sensitive shear thickening fluid(MSTF),which is specifically designed to address safety threats posed by lithium-ion batteries(LIBs)exposed to harsh mechanical and environmental conditions.The theoretical framework introduces a novel approach for harnessing the smoothed-particle hydrodynamics(SPH)methodology that incorporates the intricate interplay of non-Newtonian fluid behavior,capturing the fluid-structure coupling inherent to the MSTF.This approach is further advanced by adopting an enhanced Herschel-Bulkley(H-B)model to encapsulate the intricate rheology of the MSTF under the influence of the magnetorheological effect(MRE)and shear thickening(ST)behavior.Numerical simulation results show that in the case of cooling,the MSTF is an effective cooling medium for rapidly reducing the temperature.In terms of mechanical abuse,the MSTF solidifies through actively applying the magnetic field during mechanical compression and impact within the battery module,resulting in 66%and 61.7%reductions in the maximum stress within the battery jellyroll,and 31.1%and 23%reductions in the reaction force,respectively.This mechanism effectively lowers the risk of short-circuit failure.The groundbreaking concepts unveiled in this paper for active protection battery modules are anticipated to be a valuable technological breakthrough in the areas of EV safety and lightweight/integrated design.展开更多
Thoracic ultrasound has attracted much interest in detecting pleural effusion or pulmonary consolidation after cardiac surgery.In 2016,Trovato reported,in the World Journal of Cardiology,the interest of using,in addit...Thoracic ultrasound has attracted much interest in detecting pleural effusion or pulmonary consolidation after cardiac surgery.In 2016,Trovato reported,in the World Journal of Cardiology,the interest of using,in addition to echocardiography,thoracic ultrasound.In this editorial,we highlight the value of assessing diaphragm function after cardiac surgery and interventional cardiology pro-cedures.Various factors are able to impair diaphragm function after such interventions.Diaphragm motion may be decreased by chest pain secondary to sternotomy,pleural effusion or impaired muscle function.Hemidiaphragmatic paralysis may be secondary to phrenic nerve damage complicating cardiac surgery or atrial fibrillation ablation.Diagnosis may be delayed.Indeed,respi-ratory troubles induced by diaphragm dysfunction are frequently attributed to pre-existing heart disease or pulmonary complications secondary to surgery.In addition,elevated hemidiaphragm secondary to diaphragm dysfunction is sometimes not observed on chest X-ray performed in supine position in the intensive care unit.Analysis of diaphragm function by ultrasound during the recovery period appears essential.Both hemidiaphragms can be studied by two complementary ultrasound methods.The mobility of each hemidiaphragms is measured by M-mode ultrasonography.In addition,recording the percentage of inspiratory thickening provides important information about the quality of muscle function.These two approaches make it possible to detect hemidiaphragm paralysis or dysfunction.Such a diagnosis is important because persistent diaphragm dysfunction after cardiac surgery has been shown to be associated with adverse respiratory outcome.Early respiratory physio-therapy is able to improve respiratory function through strengthening of the inspiratory muscles i.e.diaphragm and accessory inspiratory muscles.展开更多
BACKGROUND Acute exacerbation of chronic obstructive pulmonary disease(AECOPD)is often combined with respiratory failure,which increases the patient's morbidity and mortality.Diaphragm ultrasound(DUS)has developed...BACKGROUND Acute exacerbation of chronic obstructive pulmonary disease(AECOPD)is often combined with respiratory failure,which increases the patient's morbidity and mortality.Diaphragm ultrasound(DUS)has developed rapidly in the field of critical care in recent years.Studies with DUS monitoring diaphragm-related rapid shallow breathing index have demonstrated important results in guiding intensive care unit patients out of the ventilator.Early prediction of the indications for withdrawal of non-invasive ventilator and early evaluation of patients to avoid or reduce disease progression are very important.AIM To explore the predictive value of DUS indexes for non-invasive ventilation outcome in patients with AECOPD.METHODS Ninety-four patients with AECOPD who received mechanical ventilation in our hospital from January 2022 to December 2023 were retrospectively analyzed,and they were divided into a successful ventilation group(68 cases)and a failed ventilation group(26 cases)according to the outcome of ventilation.The clinical data of patients with successful and failed noninvasive ventilation were compared,and the independent predictors of noninvasive ventilation outcomes in AECOPD patients were identified by multivariate logistic regression analysis.RESULTS There were no significant differences in gender,age,body mass index,complications,systolic pressure,heart rate,mean arterial pressure,respiratory rate,oxygen saturation,partial pressure of oxygen,oxygenation index,or time of inspiration between patients with successful and failed mechanical ventilation(P>0.05).The patients with successful noninvasive ventilation had shorter hospital stays and lower partial pressure of carbon dioxide(PaCO_(2))than those with failed treatment,while potential of hydrogen(pH),diaphragm thickening fraction(DTF),diaphragm activity,and diaphragm movement time were significantly higher than those with failed treatment(P<0.05).pH[odds ratio(OR)=0.005,P<0.05],PaCO_(2)(OR=0.430,P<0.05),and DTF(OR=0.570,P<0.05)were identified to be independent factors influencing the outcome of mechanical ventilation in AECOPD patients.CONCLUSION The DUS index DTF can better predict the outcome of non-invasive ventilation in AECOPD patients.展开更多
基金the financial support provided by the National Natural Science Foundation of China Project (U21A20315,21978186)the Fund for Shanxi“1331 Project” (1331)。
文摘Polypropylene(PP)grease holds great potential for special industrial applications.In this study,synthetic conditions,thickener content,and the ratio of two different molecular weight PPs were investigated systematically using a rheometer,scanning electron microscope,X-ray diffraction,Fourier transform infrared spectrometer,oscillating tribometer,and 3D surface profiler measurements.The results showed that suitable synthetic conditions are two quenching cycles,and the synthetic temperature and time is 240℃for 12 h.The rheological analysis showed that thickener content and different proportions of the two PP molecular weights have a significant influence on the rheological properties of PP grease.High molecular weight PP(H-PP)has a stronger thickening ability than low molecular weight PP(L-PP).The higher the amount of H-PP in the fixed thickener content or the higher the thickener content with a specific proportion,the higher the viscoelasticity of PP grease.The tribological performance is related to the rheological properties.The proportion of two different molecular weight PPs in the thickener content should be appropriate;excessive H-PP content leads to lubrication failure.
文摘Purpose: The present research was performed to evaluate the effect of food thickeners on the bitterness and dissolution of bitter drugs when co-administered to patients with dysphagia. Methods: Amlodipine besilate (AMPB) powder was used as a model drug. Starch- and xanthan gum-based food thickeners were examined, with swallowing-aid jelly as a reference. The line-spread test (LST), texture prolife analysis (TPA) were done firstly. In related to AMPB powder mixed with food thickeners solution, a conventional dissolution test simulating the oral cavity was performed, the amlodipine (AMP) concentration and taste sensor output for dissolved medium versus time profiles were developed. The dissolution test at pH 1.2 and 4.5, representing typical gastric conditions for younger or elderly people, was performed in two kinds of thickener solution and swallowing-aid jelly those were mixed with AMPB powder. Results: LST demonstrated that xanthan gum-based food thickeners fulfilled the requirements for patients with dysphagia but that starch-based food thickeners did not. In TPA, hardness and adhesiveness decreased proportionally as the concentration increased for both kinds of food thickener. Conventional dissolution test simulating oral cavity demonstrated the following bitterness ranking: xanthan gum-based food thickener Conclusion: Although xanthan gum-based food thickeners were successful in masking the bitterness of AMP, they may reduce its bioavailability in humans. The 7.1 and 4.7 (w/v) % starch-based thickener show bitterness inhibition under simulated oral cavity conditions and complete dissolution of AMP under simulated gastric conditions.
文摘The purpose of this research was to evaluate the effect of starch- and xanthan gum-based food thickeners on the bitterness and dissolution of amlodipine besilate (AMPB) loaded orally disintegrating tablets (ODT) for potential use with patients with dysphagia. A conventional dissolution test simulating the oral cavity was performed and the taste sensor output of the dissolved sample was evaluated over a 60-seconds period. When four types of AMPB loaded ODTs were tested alone, at 60 seconds, branded product (A) was the least bitter, followed by generic product (B)/generic product (C) which were equal, and finally generic product (D) which was the most bitter. Inhibition of bitterness of AMPB loaded ODTs mixed thickeners, 1.0 (w/v) % xanthan gum-based food thickener solution was significantly strong. The 7.1 (w/v) % and 4.7 (w/v) % starch-based food thickeners solution also effective in bitterness inhibition compared to the 2.4 (w/v) % starch-based food thickener solution. The dissolution test under pH 1.2 in related to 7.1 (w/v) % and 4.7 (w/v) % starch-based thickener contained each of AMPB loaded ODTs were associated with an almost complete amlodipine (AMP) dissolution (almost 90% at 10 minutes), whereas the 1.0, 2.0, 3.0 (w/v) % xanthan gum-based food thickener solution containing AMPB loaded ODTs did not show complete AMP dissolution and there were large variations in the initial dissolution stage. This suggests that a mixture of xanthan gum-based thickener and AMPB loaded ODT poses a risk of reduction of bioavailability. In conclusion, a mixture of 4.7 (w/v) % or 7.1 (w/v) % starch-based thickener with ODTs provides complete release of AMP and superior bitterness inhibition, so is the best choice for administration to patients with dysphagia.
文摘Thickeners are important units for water recovery in various industries. In this study, a semi-industrial pilot plant thickener similar to the tailing thickener of the Sarcheshmeh Copper Mine was simulated by CFD modeling. The population balance was used to describe the particle aggregation and breakup. In this population balance, 15 particle sizes categories were considered. The Eulerian-Eulerian approach with standard k-e turbulence model was applied to describe two phases of slurry flow in the thickener under steady-state condition. The simulation results have been compared with the experimental measurements to validate the accuracy of the CFD modeling. After checking the numerical results, the effect of important parameters such as, feed flow rate, solid percentage in the feed, and solid particle size on the thickener performance was studied. The thickener residence time distribution were obtained by the modeling and also compared with the experimental data. Finally, the effects of feedwell feeding on the average diameter of aggregate and turbulent intensity were evaluated.
文摘Separation of particles from liquid in the large gravitational tanks is widely used in mining and industrial wastewater treatment process.Thickener is key unit in the operational processes of hydrometallurgy and is used to separate solid from liquid.In this study,population balance models were combined with computational fluid dynamics(CFD)for modeling the tailing thickener.Parameters such as feed flow rate,flocculant dosage,inlet solid percent and feedwell were investigated.CFD was used to simulate the industrial tailing thickener with settled bed of 120 m diameter which is located in the Sarcheshmeh copper mine.Important factor of drag force that defines the rake torque of rotating paddles on the bed was also determined.Two phases turbulence model of Eulerian/Eulerian in accordance with turbulence model ofκ-ε.was used in the steady-state.Also population balance model consists of 15 groups of particle sizes with Luo and Lehr kernel was used for aggregation/breakage kernel.The simulation results showed good agreement with the operational data.
基金the National Natural Science Foundation of China(No.51834001).
文摘The trouble-free and efficient operation of paste thickeners requires an optimal design and the cooperation of each component.When underflow discharging is suspended,alleviating the vast torque that the remaining solids within the thickeners may place on rakes mainly lies in the circulation unit.The mechanism of this unit was analyzed,and a mathematical model was developed to describe the changes in underflow solid content and yield stress.The key parameters of the circulation unit,namely,the height and flow rate,were varied to test its performance in the experiments with a self-designed laboratorial thickening system.Results show that the circulation unit is valid in reducing underflow solid fraction and yield stress to a reasonable extent,and the model could be used to describe its efficiency at different heights and flow rates.A suitable design and application of the circulation unit contributes to a cost-effective operation of paste thickeners.
文摘Alkali-soluble associative latex thickeners modified with hydrophobic long chain alkyl groups were prepared using common acrylics and varying amount of a functional monomer,ethoxylated behenyl methacrylate(BEM),through emulsion polymerization.It was found that the size of the emulsion particle became larger with addition of BEM.The light transmittance of the thickener latex sharply increased with pH varied from 6 to 7.The associative latex thickener manifested a higher viscosity when solids in the latex thickeners were kept at 0.5 wt%or higher,and the optimal amount of BEM was found to be around 2.5 wt%,or 0.16 mol%.All thickener latexes modified with BEM have better shearing resistance than the BEM-free thickener.
基金supported by the National Iranian Copper Industry Co.
文摘This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.
文摘The phenomenological theory of sedimentation-thickening processes predicts the settling behavior of a flocculated suspension in dependence of two functions, the batch flux density function and the effective solid stress. These functions were determined using batch settling tests. The governing equations for sedimentation were then solved numerically for these functions and the predictions were compared to the experimental results from pilot scale thickener tests. Firstly, the continuous tests were performed in the plexiglass pilot thickener at different feed flow rates and discharge rates and the solid volume fraction of discharge, the bed height and the time were recorded for each condition. These tests were also simulated and it was observed that there is a good agreement between the results of continuous tests and the results of dynamic simulation. Secondly, the discontinuous tests were performed in the plexiglass pilot thickener at different feed flow rates with a discharge rate of zero. The bed formation rate was determined for each condition. These tests were also simulated and it was observed that there is a good agreement between the results of discontinuous tests and the results of simulation.
基金supported by National Key Research and Development Program of China(2019YFC0605300)the National Natural Science Foundation of China(61873299,61902022,61972028)+2 种基金Scientific and Technological Innovation Foundation of Shunde Graduate School,University of Science and Technology Beijing(BK21BF002)Macao Science and Technology Development Fund under Macao Funding Scheme for Key R&D Projects(0025/2019/AKP)Macao Science and Technology Development Fund(0015/2020/AMJ)。
文摘It is crucial to predict the outputs of a thickening system,including the underflow concentration(UC)and mud pressure,for optimal control of the process.The proliferation of industrial sensors and the availability of thickening-system data make this possible.However,the unique properties of thickening systems,such as the non-linearities,long-time delays,partially observed data,and continuous time evolution pose challenges on building data-driven predictive models.To address the above challenges,we establish an integrated,deep-learning,continuous time network structure that consists of a sequential encoder,a state decoder,and a derivative module to learn the deterministic state space model from thickening systems.Using a case study,we examine our methods with a tailing thickener manufactured by the FLSmidth installed with massive sensors and obtain extensive experimental results.The results demonstrate that the proposed continuous-time model with the sequential encoder achieves better prediction performances than the existing discrete-time models and reduces the negative effects from long time delays by extracting features from historical system trajectories.The proposed method also demonstrates outstanding performances for both short and long term prediction tasks with the two proposed derivative types.
文摘Dynamic simulation approach can be used for understanding the nonlinear behavior in mineral processing circuits. In this study, the gel point, the main parameters of batch flux density function and the main parameters of effective solid stress were determined at different conditions (pH, flocculant dosage and particle size). Therefore, the main parameters of phenome no logical model of sedimentation and thickening were determined as a functio n of particle size, pH and flocculant dosages using the result of experimental tests and Curve expert professional software. Then, the dynamic simulation was carried out for the industrial thickener of coal washing plant and the time-dependent variation of response variables was investigated by time-dependent variation of pH of input feed to thickener using the obtained equations. It was observed that it is possible to predict the thickener behavior as a function of time for time dependent variation of pH of input feed to the thickener of coal washing plant using obtained equations that it was not possible using phenomenological model of thickener alone.
基金Funded by the National Natural Science Foundation of China(No.50978031)the Special Fund for Basic Scientific Research of Central Colleges(Chang'an University,No.CHD2011TD003,CHD2011ZY002,CHD2011JC018)
文摘Hydroxypropyl methylcellulose (HPMC) and amphoteric polyacrylamide (ACPAM) were respectively used to prepare engineered cementitious composite (ECC) which exhibits strain-hardening behavior under uniaxial tension. The connections between cement paste structure and the performance of the composite in fresh and hardened state were investigated, aiming at achieving the desirable workability at a given solids concentration. The experimental results of viscosity and miCrostructure of cement pastes show that the intimate connections between flocculation groups lead to the growing increase in viscosity. The results of deformability and fiber dispersion demonstrate that fiber dispersion coefficient is a comprehensive index which can reflect the performance of deformability as well as uniformity. And the desirable fresh mixture can be achieved by optimizing the viscosity of cement paste. At last, the ductile strain-hardening performance of the ECC prepared with HPMC or ACPAM was investigated through uniaxial tensile test.
基金This work was supported by funding from the National Natural Science Foundation of China Projects(51834001,51704094,U170420041)the China Postdoctoral Science Foundation(2020M672226)+2 种基金Program for Science&Technology Innovation Talents in Universities of Henan Province(19HASTIT047)Key Science Research Project in Universities of Henan Province(19B620001,20A620004)Henan Polytechnic University Science Fund for Distinguished Young Scholars(J2020-3).
文摘Higher concentration is beneficial for the Paste and Thickened Tailings(PTT)operation in metal mine.Partial paste thickeners are produced lower density underflow.Flocculated tailings are intended to form a water entrapped network structure in thickener,which is detrimental to underflow concentration.In this study,the continuous thickening experiment was carried out for ultra-fine tungsten tailings to study the influence of rake shearing on underflow.The micro pores structure and seepage flow in tailings bed before and after shearing are studied by CT and simulation approach to reveal the shearing enhancement mechanism of thickening process.The results shown that,the underflow concentration is increased from 61.4 wt%to 69.6 wt%by rake shearing in a pilot scale thickener,the porosity decreased from 46.48%to 37.46%.The entrapped water discharged from sticks structure more than sphere spaces.In items of seepage,after shearing,the seepage flow channel of tailings underflow is becoming longer,which caused the decreasing average flow rate decreases and absolute permeability.The absolute permeability is negatively correlated with tortuosity.The rake shearing can destroy the flocs structure;change the effective stress to increase the concentration.Higher underflow concentration improves the waste recycling and water recovery rate,especially for arid areas.
基金supported by the National Natural Science Foundation of China (32170367 and 32000146)the Fundamental Research Funds for the Central Universities, China (2021TS066 and GK202103063)the Excellent Graduate Training Program of Shaanxi Normal University, China (LHRCCX23181).
文摘Cotton is one of the most important economic crops in the world,and it is a major source of fiber in the textile industry.Strigolactones(SLs)are a class of carotenoid-derived plant hormones involved in many processes of plant growth and development,although the functions of SL in fiber development remain largely unknown.Here,we found that the endogenous SLs were significantly higher in fibers at 20 days post-anthesis(DPA).Exogenous SLs significantly increased fiber length and cell wall thickness.Furthermore,we cloned three key SL biosynthetic genes,namely GhD27,GhMAX3,and GhMAX4,which were highly expressed in fibers,and subcellular localization analyses revealed that GhD27,GhMAX3,and GhMAX4 were localized in the chloroplast.The exogenous expression of GhD27,GhMAX3,and GhMAX4 complemented the physiological phenotypes of d27,max3,and max4 mutations in Arabidopsis,respectively.Knockdown of GhD27,GhMAX3,and GhMAX4 in cotton resulted in increased numbers of axillary buds and leaves,reduced fiber length,and significantly reduced fiber thickness.These findings revealed that SLs participate in plant growth,fiber elongation,and secondary cell wall formation in cotton.These results provide new and effective genetic resources for improving cotton fiber yield and plant architecture.
基金financially supported by the National Natural Science Foundation of China(Nos.52130404 and 52304121)the Fundamental Research Funds for the Central Universities(No.FRF-TP-22-112A1)+4 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2021A 1515110161)the ANID(Chile)through Fondecyt project 1210610the Centro de Modelamiento Matemático(BASAL funds for Centers of Excellence FB210005)the CRHIAM project ANID/FONDAP/15130015 and ANID/FONDAP/1523A0001the Anillo project ANID/ACT210030。
文摘Cemented paste backfill(CPB)is a key technology for green mining in metal mines,in which tailings thickening comprises the primary link of CPB technology.However,difficult flocculation and substandard concentrations of thickened tailings often occur.The rheological properties and concentration evolution in the thickened tailings remain unclear.Moreover,traditional indoor thickening experiments have yet to quantitatively characterize their rheological properties.An experiment of flocculation condition optimization based on the Box-Behnken design(BBD)was performed in the study,and the two response values were investigated:concentration and the mean weighted chord length(MWCL)of flocs.Thus,optimal flocculation conditions were obtained.In addition,the rheological properties and concentration evolution of different flocculant dosages and ultrafine tailing contents under shear,compression,and compression-shear coupling experimental conditions were tested and compared.The results show that the shear yield stress under compression and compression-shear coupling increases with the growth of compressive yield stress,while the shear yield stress increases slightly under shear.The order of shear yield stress from low to high under different thickening conditions is shear,compression,and compression-shear coupling.Under compression and compression-shear coupling,the concentration first rapidly increases with the growth of compressive yield stress and then slowly increases,while concentration increases slightly under shear.The order of concentration from low to high under different thickening conditions is shear,compression,and compression-shear coupling.Finally,the evolution mechanism of the flocs and drainage channels during the thickening of the thickened tailings under different experimental conditions was revealed.
基金The financial support from the National Natural Science Foundation of China(Grant No.52022112)the Fundamental Research Funds for the Central South University(Grant No.2023ZZTS0366)are acknowledged and appreciated.The authors are also grateful for the help from Dr.Ji Zhao of China University of Mining and Technology.
文摘Water spewing and muck plugging often occur during earth pressure balance(EPB)shield machines tunnelling in water-rich sandy strata,even though the conventional foam has been employed to condition sandy soils.In this study,a novel thickened foaming agent suitable for EPB shield tunnelling in water-rich sandy strata is developed.In contrast to conventional foam-conditioned sands,the thickened foam-conditioned sand has a low permeability due to the consistent filling of soil pores with the thickened foam,and the initial permeability coefficient decreases by approximately two orders of magnitude.It also exhibits a suitable workability,which is attributed to the enhanced capability of the thickened foam to condition sandy soils.In addition,the effect of concentration on the stability of the foam is explained by the Gibbs-Marangoni effect,and conditioning mechanisms for the thickened foam on sands are discussed from the evolution of foam bubbles.
基金Project supported by the National Natural Science Foundation of China(Nos.12072183 and11872236)the Key Research Project of Zhejiang Laboratory(No.2021PE0AC02)。
文摘Electric vehicles(EVs)have garnered significant attention as a vital driver of economic growth and environmental sustainability.Nevertheless,ensuring the safety of high-energy batteries is now a top priority that cannot be overlooked during large-scale applications.This paper proposes an innovative active protection and cooling integrated battery module using smart materials,magneto-sensitive shear thickening fluid(MSTF),which is specifically designed to address safety threats posed by lithium-ion batteries(LIBs)exposed to harsh mechanical and environmental conditions.The theoretical framework introduces a novel approach for harnessing the smoothed-particle hydrodynamics(SPH)methodology that incorporates the intricate interplay of non-Newtonian fluid behavior,capturing the fluid-structure coupling inherent to the MSTF.This approach is further advanced by adopting an enhanced Herschel-Bulkley(H-B)model to encapsulate the intricate rheology of the MSTF under the influence of the magnetorheological effect(MRE)and shear thickening(ST)behavior.Numerical simulation results show that in the case of cooling,the MSTF is an effective cooling medium for rapidly reducing the temperature.In terms of mechanical abuse,the MSTF solidifies through actively applying the magnetic field during mechanical compression and impact within the battery module,resulting in 66%and 61.7%reductions in the maximum stress within the battery jellyroll,and 31.1%and 23%reductions in the reaction force,respectively.This mechanism effectively lowers the risk of short-circuit failure.The groundbreaking concepts unveiled in this paper for active protection battery modules are anticipated to be a valuable technological breakthrough in the areas of EV safety and lightweight/integrated design.
文摘Thoracic ultrasound has attracted much interest in detecting pleural effusion or pulmonary consolidation after cardiac surgery.In 2016,Trovato reported,in the World Journal of Cardiology,the interest of using,in addition to echocardiography,thoracic ultrasound.In this editorial,we highlight the value of assessing diaphragm function after cardiac surgery and interventional cardiology pro-cedures.Various factors are able to impair diaphragm function after such interventions.Diaphragm motion may be decreased by chest pain secondary to sternotomy,pleural effusion or impaired muscle function.Hemidiaphragmatic paralysis may be secondary to phrenic nerve damage complicating cardiac surgery or atrial fibrillation ablation.Diagnosis may be delayed.Indeed,respi-ratory troubles induced by diaphragm dysfunction are frequently attributed to pre-existing heart disease or pulmonary complications secondary to surgery.In addition,elevated hemidiaphragm secondary to diaphragm dysfunction is sometimes not observed on chest X-ray performed in supine position in the intensive care unit.Analysis of diaphragm function by ultrasound during the recovery period appears essential.Both hemidiaphragms can be studied by two complementary ultrasound methods.The mobility of each hemidiaphragms is measured by M-mode ultrasonography.In addition,recording the percentage of inspiratory thickening provides important information about the quality of muscle function.These two approaches make it possible to detect hemidiaphragm paralysis or dysfunction.Such a diagnosis is important because persistent diaphragm dysfunction after cardiac surgery has been shown to be associated with adverse respiratory outcome.Early respiratory physio-therapy is able to improve respiratory function through strengthening of the inspiratory muscles i.e.diaphragm and accessory inspiratory muscles.
文摘BACKGROUND Acute exacerbation of chronic obstructive pulmonary disease(AECOPD)is often combined with respiratory failure,which increases the patient's morbidity and mortality.Diaphragm ultrasound(DUS)has developed rapidly in the field of critical care in recent years.Studies with DUS monitoring diaphragm-related rapid shallow breathing index have demonstrated important results in guiding intensive care unit patients out of the ventilator.Early prediction of the indications for withdrawal of non-invasive ventilator and early evaluation of patients to avoid or reduce disease progression are very important.AIM To explore the predictive value of DUS indexes for non-invasive ventilation outcome in patients with AECOPD.METHODS Ninety-four patients with AECOPD who received mechanical ventilation in our hospital from January 2022 to December 2023 were retrospectively analyzed,and they were divided into a successful ventilation group(68 cases)and a failed ventilation group(26 cases)according to the outcome of ventilation.The clinical data of patients with successful and failed noninvasive ventilation were compared,and the independent predictors of noninvasive ventilation outcomes in AECOPD patients were identified by multivariate logistic regression analysis.RESULTS There were no significant differences in gender,age,body mass index,complications,systolic pressure,heart rate,mean arterial pressure,respiratory rate,oxygen saturation,partial pressure of oxygen,oxygenation index,or time of inspiration between patients with successful and failed mechanical ventilation(P>0.05).The patients with successful noninvasive ventilation had shorter hospital stays and lower partial pressure of carbon dioxide(PaCO_(2))than those with failed treatment,while potential of hydrogen(pH),diaphragm thickening fraction(DTF),diaphragm activity,and diaphragm movement time were significantly higher than those with failed treatment(P<0.05).pH[odds ratio(OR)=0.005,P<0.05],PaCO_(2)(OR=0.430,P<0.05),and DTF(OR=0.570,P<0.05)were identified to be independent factors influencing the outcome of mechanical ventilation in AECOPD patients.CONCLUSION The DUS index DTF can better predict the outcome of non-invasive ventilation in AECOPD patients.