A Quick and Practical Approach for Concept-design of Submerged Thin-walled Stiffened Cylinders

Goal based and limit state design is nowadays a well-established approach in many engineering fields.Ship construction rules started introducing such concepts since early 2000.However,classification societies’rules do not provide hints on how to verify limit states and to determine the structural layout of submerged thin-walled stiffened cylinders,whose most prominent examples are submarines.Rather,they generally offer guidance and prescriptive formulations to assess shell plating and stiffening members.Such marine structures are studied,designed and built up to carry payloads below the sea surface.In the concept-design stage,the maximum operating depth is the governing hull scantling parameter.Main dimensions are determined based on the analysis of operational requirements.This study proposes a practical conceptdesign approach for conceptual submarine design,aimed at obtaining hull structures that maximize the payload capacity in terms of available internal volume by suitably adjusting structural layout and stiffening members’scantling,duly accounting for robustness and construction constraints as well as practical fabrication issues.The proposed scantling process highlights that there is no need of complex algorithms if sound engineering judgment is applied in setting down rationally the hull scantling problem.A systematic approach based on a computer-coded procedure developed on purpose was effectively implemented and satisfactorily applied in design practice.

Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine

It is of a vital importance to reduce the frictional losses in marine diesel engines. Advanced surface textures have provided an e ective solution to friction performance of rubbing pairs due to the rapid development of surface engineering techniques. However,the mechanisms through which textured patterns and texturing methods prove beneficial remains unclear. To address this issue,the tribological system of the cylinder liner?piston ring(CLPR) is investigated in this work. Two types of surface textures(Micro concave,Micro V?groove) are processed on the cylinder specimen using di erent processing methods. Comparative study on the friction coe cients,worn surface texture features and oil film characteristics are performed. The results demonstrate that the processing method of surface texture a ect the performance of the CLPR pairs under the specific testing conditions. In addition the micro V?groove processed by CNCPM is more favorable for improving the wear performances at the low load,while the micro?con?cave processed by CE is more favorable for improving the wear performances at the high load. These findings are in helping to understand the e ect of surface texture on wear performance of CLPR.

Tribological Properties of the Plating Chromic Layer for 38CrMoAl Cylinder Liner

A chromium layer about 100 μm thickness was plated on the 38CrMoAl cylinder liner and the chromium layer was mcro quilting milled by using quilting grinding machine. The tribological properties and wear comparison test were studied. The friction coefficient of the cylinder liner plated chromic layer and micro quilting milled is 15%-30% lower than the ordinary cylinder liner. The pits generated by micro quilting milling on the chromic layer surface had good effect of accommodating the abrasive grains and storaging lubricants, which improved the effect of the friction pair significantly. The single-cylinder machine run-in tests revealed that the cylinder liner with plated chromic layer and micro quilting milling had good wear durability, and was different wear mechanisms to ordinary cylinder liner.

Piston-ring and Cylinder-liner Lubrication in Internal Combustion Engines Based on Thermo-hydrodynamic

Currently the extruded effect,roughness to the lubricant shear thinning,temperature changes and other factors or some combination of a single factor mainly considered in the lubrication study of piston ring-cylinder.In the study of the energy equation,the oil viscosity-temperature properties,adsorption layer characteristics are usually not considered.So the theoretical research is different from the actual situation of engineering.The lubrication of piston ring-cylinder liner system in internal combustion(IC) engines is studied here based on the theory of thermal flow.An unsteady and compressible hydrodynamic lubrication model with an equivalent viscosity based on shear and extruded flow factor is derived by employing the viscosity-temperature relationship,meanwhile,characteristics such as lubricating oil’s density varying with pressure and temperature,thickness of adsorbent layer and oil film’s geometry are also considered in this model.While setting up the energy equation,the effect of lubricating oil’s volume expansion and viscous dissipation on temperature,the heat conduction along oil film’s thickness direction are considered.Finite difference equation is formed by using a first-order difference scheme in time scale and second-order difference scheme in space scale.A common diesel engine is introduced as an instance to predict the distribution of the minimum oil film thickness in the piston ring-cylinder liner system.The results of simulation calculation show that the minimum oil film thickness will decrease especially around the top dead center when the oil’s volume expansion,viscous dissipation and heat conduction are considered,which implies that:it is essential to take the thermal flow idea into account during investigating piston ring-cylinder liner system’s lubrication.A more complete piston ring-cylinder liner lubrication theory was established according to thermal fluids from the perspective of research.It is more helpful to guide the practical application of engineering to improve the accuracy of forecasting the minimum film thickness.On the other hand,distribution of the minimum oil film thickness shows a nonlinear property if the thickness of piston rings and cylinder liner adsorbent layer are involved in the analysis.It may be feasible to increase the minimum oil film thickness by varying surface roughness and material properties of piston rings and cylinder liner.

New Mg_2Si based Alloy for Automobile Engine Cylinder Liner

New Mg2Si based alloy were prepared by mechanical alloying. Sintering temperature was from 825 to 865K, which indicated that few Mg2Si were produced at lower temperature while MgO were produced at higher temperature. Microstructure image showed that at sintering temperature of 855K, Mg2Si were mostly synthesized with the reaction of purity magnesia powder and silicon powder. Hardness and wear tests proved that the new synthetic silicon magnesium alloy had higher hardness and good wear resistance. Under the same testing conditions, it is found that the hardness of the new material is 420.50, and pure magnesium is only 41.65.In the same experiments it is also found that under the same pressure, pure magnesium alloys than silicon wearing capacity of pure magnesium is 2 times as high that of Mg2Si based alloy. It shows that Mg2Si based alloy is the ideal material for the wear parts of car engine cylinder liner because of its small density, stable dimension, high hardness and wear-resisting.

基于改进EEMD-MB1DCNN的船用柴油机缸套-活塞环故障诊断

针对船用中高速柴油机缸套-活塞环振动信号非线性非平稳性以及同类型不同损伤程度故障发生时振动信号时频域特征相似、故障难以识别等问题,利用振动信号辨识故障,提出一种基于改进集成经验模态分解方法和多模块一维卷积神经网络端到端缸套-活塞环故障诊断方法,通过设计固有模态分量IMF信息质量筛选准则对EEMD分解出的IMFs进行重新排序,获得包含更多凸显故障特征成分的重构信号,输入到上述神经网络模型,通过振动信号分析并与现有方法比较,评估所设计IMF信息质量筛选准则与所搭建模型的性能,试验结果显示该方法能准确、有效地识别缸套-活塞环故障类型。在判断该易损件同类型不同磨损程度故障诊断中有较高的准确率,能对故障状况进行有效的特征提取与故障分类。

过盈量对干式缸套变形规律的影响研究

以某干式缸套柴油机为原型,采用有限元仿真的方法,建立了机体、缸盖、缸垫、缸套、螺栓等组合的有限元模型,分别在预紧工况和热机耦合工况下对比研究了施加过盈量前后的气缸套变形规律。研究结果表明:在装配工况下,从缸套顶部至缸套底部,缸套的变形量都逐渐变小,施加了过盈量后的缸套综合变形增加了近两倍,综合变形量最大出现在第四缸上部的290°区域,变形量为19.4μm。在多个载荷的耦合作用下,不同缸爆发时的缸套变形趋势和单独施加螺栓预紧力的变形趋势几乎一致,从缸套顶部至底部,变形量逐渐较小,第二、三缸变形较小,第一、四缸靠近自由端两侧变形较大,最大变形出现的位置从顶部90°方向移动至0°方向附近,变形量为302.8μm。

基于预补偿的缸孔型线优化设计及其密封特性研究

以某非道路高压共轨柴油机为研究对象,建立了螺栓–缸盖–缸垫–缸套–机体装配耦合模型,采用仿真分析与测试相结合的方式研究了工作状态下的缸套热机耦合失圆变形。基于缸套变形结果设计了锥形、瓶颈形、纺锤形、椭圆形、椭圆纺锤复合形5种具有不同型线特征的异形缸套预补偿方案,研究了不同异形缸套的热机耦合变形量、傅里叶变形幅值及其密封与摩擦性能。研究结果表明,在第三缸的101.8 mm截面处,椭圆形方案的最大径向变形量比原机缸套减小了15.42%;椭圆形缸套的窜气量与原机缸套相比减小了1.34%,其他方案的窜气量均比原机缸套大;与原机缸套相比,纺锤形缸套和椭圆纺锤复合形缸套的机油消耗量减小了21.36%。

低硫条件下船舶主机缸套-活塞环磨损现状与应对策略

国际海事组织(IMO)的“限硫令”于2020年1月在全球范围内实施后,燃用低硫燃油(LSFO)成为许多远洋公司的主要选择。对多家远洋公司船舶主机燃用LSFO后的运行状况进行调研,发现缸套、活塞环等零部件存在异常磨损及故障显著增多的现象。将LSFO对船舶主机的影响以及其实际应用案例进行分析与总结,并针对燃用LSFO的主机所出现的异常磨损和故障现象提出应对策略。该研究有助于解决LSFO条件下船舶主机缸套和活塞环异常磨损问题的实际需求,希望进一步推动LSFO条件下缸套和活塞环异常磨损的机理研究。

制造氢气瓶内胆的电加热滚塑工艺参数的优化研究

在static bed模型的基础上为在PID控制模式下制造氢气瓶内胆的电加热滚塑工艺建立了一个传热模型,并通过FLUENT软件来仿真计算模具表面温度和模内温度以及加热时间和加热电能。这些仿真值与实测值都吻合得较好,从而验证了本文传热模型的准确性。然后应用该传热模型计算了在16种情形下停止加热时的模内温度以及加热时间和加热电能,并通过灰色关联度方法分析了PID模式的触发温度和初始加热功率的百分比对加热时间和加热电能的影响程度。结果表明,停止加热时的模内温度随初始加热功率的百分比变化较小,但随PID模式触发温度的升高而降低。加热时间和加热电能都是随着PID模式的触发温度的升高而减少。最优化的工艺参数是PID模式的触发温度取250℃且初始加热功率的百分比取90%。另外,PID模式的触发温度对加热时间和加热电能的影响程度都要大于初始加热功率的百分比对它们的影响程度。

合金灰口铸铁气缸套组织形貌与耐磨性研究

针对5种成分和组织的灰口铸铁气缸套,包括2种贝氏体铸铁气缸套和3种珠光体铸铁气缸套,全面分析了其成分、相组成及硬度等材料特性,将喷钼活塞环与5种合金灰口铸铁气缸套对磨,通过比较各配对副的摩擦磨损性能,获得了喷钼活塞环与5种合金灰口铸铁气缸套的匹配规律。研究结果表明:5种气缸套材料均为由硬质相、基体和石墨构成的复合耐磨结构,各组分的性能、分布及其配比,是决定耐磨性的关键因素。珠光体基体气缸套的磨损量相对稳定,气缸套与活塞环的相对磨损量正常;铸态贝氏体气缸套磨损较轻,配对活塞环的磨损量比珠光体气缸套大;贝氏体气缸套和活塞环的磨损均量很小。

扫描速度对缸套等离子束淬火层组织性能的影响

针对气缸套内表面磨损失效呈现漏斗状现象,采用等离子束淬火专用设备,通过控制扫描速度随等离子束淬火工作行程逐渐降低,在气缸套内表面从下至上制备了强化层,并在试车台上考察了淬火层的摩擦学性能。采用OM、SEM、CLSM和硬度计等,对缸套内表面等离子束淬火前后的组织性能和磨损形貌进行了测试观察分析。结果表明:不同扫描速度下硬化带组织均由隐针马氏体+残余奥氏体组成。随着扫描速度的逐渐降低,残余奥氏体含量逐渐减小,硬化带的硬度、深度、宽度和高度逐渐增加,气缸套内表面自下而上磨损量几乎相同,最大磨损量相对原气缸套内径减少73.53%。这归因于扫描速度的逐渐降低对气缸套内表面的强化作用从下至上逐渐增强。

柴油机气缸套空化现象与空蚀机理分析

针对柴油机气缸套在工作过程中因冷却液的空化发生空蚀现象,文中在对单缸冷却水套进行空化流动数值模拟的基础上,结合近壁面多空泡溃灭过程的仿真,从宏观和介观上研究了柴油机气缸套的空化现象和空蚀机理.首先,基于单缸冷却水套的模拟发现,缸套壁面的振动导致冷却液发生空化现象,生成大量空化气泡.然后,模拟了近壁面空泡的溃灭过程,并分析了空泡间距、空泡数量等因素对多空泡溃灭的影响.结果表明:空泡间距越小,溃灭时间越长,当泡心间距从0.050 mm减小至0.025 mm时,近壁面空泡的溃灭压力增大49.82%,产生的微射流速度增大10.56%;增加空泡数量,溃灭压力呈先增后减的趋势,当空泡数量由2个增至10个,微射流的速度增大44.93%.研究表明,空泡溃灭产生的微射流具有较高的水锤压力,该压力作用于缸套壁面,造成腐蚀破坏,是缸套发生空蚀的根本原因.

基于激光熔覆的缸套表面梯度材料制备及其摩擦学性能研究

目的研究功能梯度材料对缸套表面的抗磨减摩作用,提升缸套-活塞环配副的摩擦学性能。方法通过激光打标机在缸套表面制备具有30°角规则纹理排布的凹槽,在凹槽内采用同轴送粉的方式熔覆镍含量不同的铁基粉末,分析熔覆合金层的金相组织,并利用往复式摩擦磨损试验机研究在一定载荷压力下功能梯度材料缸套的摩擦学性能。结果熔覆层金相组织呈现梯度排布,熔覆层与基体材料分子原子交互扩散形成良好的冶金结合。牌号为350、镍质量分数为4.2%、铁质量分数80%的粉末所制备的功能梯度材料,减摩效果最为明显,相比未经处理的对照组,平均摩擦因数降幅为25.4%,且该组在试验中接触电阻的平均值最大,相比对照组提升了63.45%。牌号为330、镍质量分数为9%、铁质量分数为70%的粉末制备的缸套,表面支撑指数最高为0.78,相比于未处理的对照组,增幅达到35%,且试验组活塞环经摩擦后,磨损量均小于对照组。结论制备了30°角分布的功能梯度材料,能使得缸套-活塞环摩擦学系统在工作过程中摩擦副的润滑油膜厚度更厚,且在运行过程中更稳定,以减少摩擦力和降低摩擦因数。同时,增强其支撑能力和储存润滑油的能力,使所制备的缸套摩擦因数显著降低。牌号为350的材料,改善摩擦学性能的效果最优。

考虑时变效应的织构缸套润滑性能分析及试验研究

内燃机缸孔内的时变效应和气压变化对活塞环受力影响不可忽略,而织构形貌参数对发动机油耗性能的影响也有待深入研究。为此,构建考虑时变效应和缸内气体压力变化的织构化缸套-活塞环摩擦副的流体动压润滑模型,采用多重网格法求解模型获得润滑油膜压力分布规律,进而获得缸套-活塞环间的最小油膜厚度和摩擦力,并针对装配织构缸套的发动机开展台架试验。计算结果表明:缸内气体压力变化影响活塞环径向受力,时变效应使缸套-活塞环受挤压效应的影响;织构化缸套能够增加润滑油膜厚度、减少摩擦力,当微凹坑深度为4~7μm,织构面积密度较小如为5%、10%时,能够获得较佳的最小油膜厚度与摩擦力值。台架试验表明,与原发动机相比,装配织构缸套的发动机油耗性能明显改善,在中高转速下燃油耗降幅较为显著,油耗最大下降14.5%,而24 h机油耗减少26.48%。

基于声发射的缸套珩磨网纹磨损深度检测

珩磨网纹对维持活塞-缸套间润滑状态至关重要,磨损造成的网纹深度变浅会引起润滑恶化并加剧摩擦磨损,甚至造成拉缸等重大机械事故。提出一种基于声发射的缸套珩磨网纹磨损深度检测方法,从声发射信号中识别提取了网纹深度有关特征变量,通过构建卷积神经网络模型建立了声发射特征信号与网纹深度的映射关系。基于长行程往复式摩擦试验机,对不同网纹简约谷深的缸套试样在变转速、变载荷工况下实测的声发射信号进行采集分析,发现网纹简约谷深与声发射信号低频和高频段存在较强相关性。基于所建模型对早期缸套网纹磨损进行了检测评估,结果表明:珩磨网纹深度识别平均准确率达94%,证实了基于声发射技术进行缸套网纹磨损深度非介入式检测的可行性。

考虑温度分布和初弹力影响的活塞环-缸套试验台研究

为探究活塞环初弹力作用下不同缸套温度对活塞环摩擦性能的影响,设计考虑缸套温度分布的活塞环初弹力摩擦性能试验台,其缸体-缸套组件基于浮动缸套方法设计,通过供油盖从顶部供润滑油,使用活塞环夹具安装活塞环,在缸套外壁安装3个环形电加热器对缸套进行预加热。当活塞环未加载荷仅在初弹力情况下,仅改变缸套温度分布,研究不同缸套温度分布对活塞环-缸套系统摩擦性能的影响。结果表明:随着缸套温度的升高,活塞环-缸套摩擦副摩擦力和摩擦功耗呈现先减小后增加的趋势,对于研究的活塞环-缸套摩擦副,在缸套温度为60~70℃时,摩擦力和摩擦功耗最小。因此存在合适的缸套温度,使得活塞环-缸套摩擦副的摩擦性能最优。

活塞-缸套摩擦副状态表征参数选取方法研究

建立柴油机试验台架采集数据,对机体表面振动信号进行时频分析,探明不同激励源与机体表面振动信号的关系。选取变分模态分解(variational mode decomposition,VMD)算法对振动信号进行分解,提取各分量的表征参数。通过探究转矩、转速、润滑油温度及配缸间隙与各表征参数的相关性,初步确定相关性强的表征参数集。通过多评价准则对上述表征参数集进行分析,最终得出贡献度最高的表征参数为本征模态函数(intrinsic mode function,IMF)1的标准差、均方频率、峭度、最大奇异值、频域积分和IMF6的脉冲因子、标准差、重心频率、频率方差及最大奇异值。

基于CPA-FM-MEM磨粒分析的缸套-活塞系统健康状态评估

以内燃机典型摩擦副缸套-活塞系统为研究对象,设计和搭建内燃机缸套-活塞系统状态监测试验台。针对传统最大熵方法分析润滑油中磨粒监测数据存在的缺点,提出改进的分数矩最大熵方法(Fractional Moment Maximum Entropy Method, FM-MEM),并结合食肉植物优化算法(Carnivorous Plant Algorithm, CPA)对关键参数进行寻优求解。对润滑油中磨粒监测数据进行阈值划分,实现内燃机健康状态评估,然后将理论与试验相结合,以在线磨粒监测为主,从润滑油磨粒、理化指标以及表面形貌3个方面对内燃机缸套-活塞系统的运行状态进行监测,分析低速工况下缸套-活塞系统各个时间段的磨损健康状态及磨粒含量变化趋势,通过内燃机整机的在线磨粒监测试验,证明该方法可实现对内燃机缸套-活塞系统的实时状态监测。

重负荷发动机冷却液气穴腐蚀评定方法研究

重负荷发动机多采用湿式缸套,易产生气穴腐蚀现象,因此对冷却液的性能要求更高。目前,国内对于轻负荷与重负荷冷却液,一般通过化学组成进行区分,还未建立相关试验标准用于性能评价,因此存在局限性。文章应用超声波法模拟试验,深入研究其测试冷却液抗气穴腐蚀性能的可行性、区分性及重复性,进一步优化改进发动机冷却液超声波气穴腐蚀评定法。优化后的方法可为重负荷冷却液配方的评价及开发提供有效帮助。