Semitransparent organic photovoltaics enabled by transparent p-type inorganic semiconductor and near-infrared acceptor

Semitransparent organic photovoltaics(STOPVs)have gained wide attention owing to their promising applications in building-integrated photovoltaics,agrivoltaics,and floating photovoltaics.Organic semiconductors with high charge carrier mobility usually have planar and conjugated structures,thereby showing strong absorption in visible region.In this work,a new concept of incorporating transparent inorganic semiconductors is proposed for high-performance STOPVs.Copper(I)thiocyanate(CuSCN)is a visible-transparent inorganic semiconductor with an ionization potential of 5.45 eV and high hole mobility.The transparency of CuSCN benefits high average visible transmittance(AVT)of STOPVs.The energy levels of CuSCN as donor match those of near-infrared small molecule acceptor BTP-eC9,and the formed heterojunction exhibits an ability of exciton dissociation.High mobility of CuSCN contributes to a more favorable charge transport channel and suppresses charge recombination.The control STOPVs based on PM6/BTP-eC9 exhibit an AVT of 19.0%with a power conversion efficiency(PCE)of 12.7%.Partial replacement of PM6 with CuSCN leads to a 63%increase in transmittance,resulting in a higher AVT of 30.9%and a comparable PCE of 10.8%.

Synthesis,crystal structures,and antibacterial activities of two zinc(Ⅱ) complexes bearing 5⁃phenyl⁃1H⁃pyrazole group

A novel compound(H_(2)L)SCN(5⁃methyl⁃3⁃phenyl⁃2H⁃pyrazol⁃1⁃ium thiocyanate)has been obtained by the reaction of thiosemicarbazide with benzoylacetone in ethanol.Two zinccomplexes[Zn(HL)_(2)(NCS)(CH_(3)COO)](1)and[Zn_(2)(L)_(2)(HL)_(2)(NCS)_(2)]_(2)·2CH_(3)OH(2)have been synthesized by the coordination reactions of Zn(OAc)_(2)·2H_(2)O or ZnCl_(2)with(H_(2)L)SCN under reflux conditions.Elemental analyses and single⁃crystal X⁃ray diffraction have con⁃firmed the structures of the synthesized compounds.The(H_(2)L)SCN ligand and complex 1 pertain to the triclinic sys⁃tem with space group P1,while complex 2 belongs to the monoclinic system with space group P2_(1)/n.Additionally,the antibacterial activities of the compounds were evaluated in vitro using the agar diffusion method against the bac⁃terial strains(Candida albicans,Staphylococcus aureus,and Escherichia coli).The results showed that the ligand exhibited relatively good antibacterial activities against the bacteria,and the complexes possessed stronger antibac⁃terial activities against the same bacteria than the free ligand.CCDC:2190252,(H2L)SCN;2190253,1;2190256,2.

Adsorption removal of thiocyanate from aqueous solution by calcined hydrotalcite

A hydrotalcite with Mg/AI molar ratio 2 was prepared by co-precipitation method and was characterized by XRD, TG/DTA, Zeta potential and BET surface area. The hydrotalcite was calcined at 500℃, with the dehydration from interlayer, the dehydroxilation from the brucite-like layer and the decomposition of carbonate successively, transformed into the mixed oxide type. The removal of thiocyanate from aqueous solution by using the original hydrotalcite and calcined hydrotalcite （HTC-500） was investigated. The results showed that the thiocyanate adsorption capacity of calcined hydrotalcite was much higher than that of the original form. Calcined hydrotalcite was particularly effective at removing thiocyanate, and that the effective range of pH for the thiocyanate removal are between 5.5-10.0. The experimental data of thiocyanate removal fit nicely with Langmuir isotherm, and the saturated adsorption uptake was 96.2 mg SCN-/g HTC-500. The adsorption of thiocyanate by calcined hydrotalcite follows first-order kinetics. And the intercalation to the structure recovery for calcined hydrotalcite. But the presence of additional anions could affect the adsorption behavior of thiocyanate.

A facile and convenient method for synthesis of alkyl thiocyanates under homogeneous phase transfer catalyst conditions

A simple and environmentally friendly method is described for the efficient conversion of alkyl halide to alkyl thiocyanate using tetrabutylammonium bromide （TBAB） as a phase transfer catalyst. The reactions occur in water and furnish the corresponding alkyl thiocyanate in high yields. No evidence for the formation of isothiocyanates as by-product of the reaction was observed and the products were obtained in pure form without further purification.

Comparison of Three Different Techniques of Human Sperm DNA Isolation for Methylation Assay

Summary： Human sperm DNA is an important genetic and epigenetic material, whose chromatin structure differs from that of somatic cells. As such, conventional methods for DNA extraction of somatic cells may not be suitable for obtaining sperm DNA. In this study, we evaluated and compared three sperm DNA extraction techniques, namely, modified guanidinium thiocyanate method （method A）, traditional phenol-chloroform method （method B）, and TianGen kit method （method C）. Spectrophotometry and agarose gel electrophoresis analyses showed that method A produced DNA with higher quantity and purity than those of methods B and C （P〈0.01）. PCR results revealed that method A was more reliable in amplifying DEAD-box polypeptide 4 （DDX4） and copy number variations （CNVs） than methods B and C, which generated false-positive errors. The results of sperm DNA methylation assay further indicated that methods A and B were effective, and the former yielded higher quantitative accuracy. In conclusion, the modified guanidinium thiocyanate method provided high quality and reli- able results and could be an optimal technique for extracting sperm DNA for methylation assay.

Regioselective ring opening of epoxides using NH_4SCN/silica sulfuric acid:An efficient approach for the synthesis of β-hydroxy thiocyanate under solvent-free conditions

Silica sulfuric acid was developed as a stable and efficient heterogeneous catalyst in organic synthesis. This solid acid catalyzed the regioselective ring opening of epoxides by thiocyanate anion to give thiocyanohydrins as key intermediates in agricultural and pharmaceutical chemistry in high yields under solvent-free conditions.

Determination of Trace Thiocyanate by a Chitosan-Modified Glassy Carbon Electrode

A chitosan modified glassy carbon electrode(CMGCE) was employed for the determination of thiocyanate. The measurement was carried out by means of anodic stripping voltammetry. The effects of several experimental parameters, such as pH, the amount of modifier, deposition potential and deposition time were studied for analytical application, respectively. A liner response was obtained in the concentration range of 3 5×10 -8 - 9.3×10 -7 g/mL of SCN -. The detection limit was found to be 1.9×10 -8 g/mL. The method was satisfactorily used to detect SCN - in saliva.

Resonance Light Scattering Spectra of Silver Thiocyanate System and its Application in Analysis

A novel determination method of Ag^＋ was established. In acetic acid-sodium acetate buffer （pH 5.0） medium, Ag^＋ reacts with SCN^- to form AgSCN in the presence of TritonX-100,which results in an increase of resonance light scattering （RLS）and giving a new RLS spectrum.The maximum RLS peak was at 585 nm,The enhancement of resonance light scattering at 585 nm was proportional to the concentration of Ag^＋ ranging from 0.0045-4.00μg mL^-1 （r=9991）,and the detection limit was 1.37 ng mL^-1 with the recovery of 97.70%- 104.80%。

Simple Modifications to Standard TRIzol®Protocol Allow High-Yield RNA Extraction from Cells on Resorbable Materials

Resorbable bioceramics are attractive for medical applications such as bone substitution. Biochemical analysis on cells cultured on these biomaterials is vital to predict the impact of the materials in vivo and RNA extraction is an essential step in gene expression study using RT-qPCR. In this study, we describe simple modifications to the TRIzol? RNA extraction protocol widely used in biology and these allow high-yield extraction of RNA from cells on resorbable calcium phosphates. Without the modifications, RNA is trapped in the co-precipitated calcium compounds, rendering TRIzol? extraction method infeasible. Among the modifications, the use of extra TRIzol? to dilute the lysate before the RNA precipitation step is critical for extraction of RNA from porous ?-tricalcium phosphate (?-TCP) discs. We also investigate the rationale behind the undesirable precipitation so as to provide clues about the modifications required for other resorbable materials with high application potential in bone tissue engineering.

Thiocyanate Oxidation by Coculture from a Coke Wastewater Treatment Plant

Bacterial strains in an activated sludge aerobic reactor from a coke wastewater were found to be able to utilize thiocyanate as carbon source when the thiocyanate-containing wastewater was deprived of carbon source. This study showed that three thiocyanate-oxidizing bacterial strains, Burkholderia sp., Chryseobacterium sp., and Ralstonia sp. were isolated from the activated sludge of a coke wastewater treatment plant as evidenced by the fact that complete decomposition of thiocyanate was achieved either by coculture or individual pure culture. The thiocyanate biodegradation by the coculture occurred with an optimal pH range between 6.5 and 8.5 and an optimal temperature range between 30°C and 40°C. The biodegradation kinetics of thiocyanate was well fitted with the Andrew-Haldane model, which demonstrated a distinct substrate concentration-inhibited bacterial growth pattern. The effects of different types of additional carbon, nitrogen or sulfur sources on thiocyanate biodegradation were also investigated. Analysis of the end-products indicated that thiocyanate degradation by these strains should proceed via two pathways.

Synthesis and Crystal Structure of Co(DMSO)_2(H_2O)_2(SCN)_2 with One-dimensional Hydrogen-bonded Structure (DMSO = Dimethylsulfoxide)

The title complex Co（DMSO）2（H2O）2（SCN）2 has been prepared and structurally characterized. It crystallizes in monoclinic, space group P21/n with a= 5.1981（9）, b = 11.944（2）, c = 12.646（2） A,β = 98.686（2）°, V = 776.2（2） A^3, C6H16CoN2O4S4, Mr = 367.38, Z = 2, De = 1.572 g/cm^3, F（000） = 378 and μ（MoKa） = 1.646 mm^-1. The structure was refined to R= 0.0232 and wR = 0.0645 for 1241 observed reflections with I 〉 2σ（I）. In the title complex, each Co（II） atom is octahedrally coordinated by four O atoms from two DMSO ligands and two water molecules as well as two N atoms from SCN^- ions. The title molecules are connected to each other through intermolecular hydrogen bonds to form a 1-D structure extended by eight-membered Co2O4H2 rings.

Al(HSO_4)_3/silica gel as a novel catalytic system for the ring opening of epoxides with thiocyanate anion under solvent-free conditions

For the first time,metal hydrogen sulfates and phosphates/silica gel have been studied as efficient and powerful solid acid catalysts in the ring opening of epoxides with thiocyanate anion.The most significant result was obtained by Al(HSO4)3/SiO2which afforded the corresponding β-hydroxy thiocyanates under mild reaction conditions and in very short reaction times.The cheapness, availability of the catalyst,ease of procedure and work-up make this method attractive for the organic synthesis.

Thiocyanate Ion Selective Solid Contact Electrode Based on Mn Complex of N,N'-BIs-(4-Phenylazosalicylidene)-O-Phenylene Diamine Ionophore

A thiocyanate ion selective poly(aniline) solid contact electrode based on manganese complex of N,N’-bis-(4-phenylazosalicylidene)-o-phenylene diamine ionophore was successfully developed. The electrode exhibits a good linear response of 58.1 mV/decade (at 20?C ± 0.2?C, r2 = 0.998) with in the concentration range of 1 × 10–1.0 ~ 1 × 10–5.8 M thiocyanate solution. The composition of this electrode was: ionophore 0.040, polyvinylchloride 0.300, dibutylphthalate 0.660 (mass). This dibutylphthalate plasticizer provides the best response characteristics. The electrode shows good selectivity for thiocyanate ion in comparison with any other anions and is suitable for use with aqueous solutions of pH 4.0 ~ 6.0. The standard deviations of the measured emf difference were ±1.70 and ±2.01 mV for thiocyanate sample solutions of 1.0 × 10–2 M and 1.0 × 10–3 M, respectively. The stabilization time was less than 170 sec. and response time was less than 17 sec.

Effect of surfactant on zeta potential and rheology behavior of methylene bis (thiocyanate) suspension concentrate

Methylene bis(thiocyanate)(MBT) is insoluble in water, so suspension concentrate(SC) of MBT is extremely relied on surfactants. In this paper, SC of MBT was prepared with wet-grinding technology, and the effect of surfactants,such as Morwet D425(D425) and Morwet EFW(EFW)(two kinds of dispersant), on the Zeta potential and rheology behavior of MBT SC were investigated. The results showed that the Zeta potential absolute value of MBT SC increased with the increasing content of D425, and it decreased with the increasing content of EFW at acidic solution(pH = 4.5). In the combination system of D425 and EFW, Zeta potential of MBT SC decreased first and then increased with the increasing content of EFW. The relationship between shear rate(γ) and viscosity(η) was studied according to Herschel–Bulkley model: η = η0+ k/γ, and the relationship between shear rate(γ) and shear force(τ) was investigated according to:τ = τ0+Kγ~n. It was revealed that the mixed fluid belonged to Yield Pseudoplastic Fluid.

Effects of thiocyanate anions on switching and structure of poly(N-isopropylacrylamide) brushes

In this work, we investigate the effects of thiocyanate anions on the switching and the structure of poly(Nisopropylacrylamide)(PNIPAM) brushes using a molecular theory. Our model takes into consideration the PNIPAM–anion bonds, the electrostatic effects and their explicit coupling to the PNIPAM conformations. It is found that at low thiocyanate anion concentration, as the anion concentration of thiocyanate increases, thiocyanate anions are more associated with PNIPAM chains through the PNIPAM–anion bonds, which contributes to stronger electrostatic repulsion and leads to an increase of lower critical solution temperature(LCST). By analyzing the average volume fractions of PNIPAM brushes,it is found that the PNIPAM brush presents a plateau structure. Our results show that the thiocyanate anions promote phase segregation due to the PNIPAM–anion bonds and the electrostatic effect. According to our model, the reduction of LCST can be explained as follows: at high thiocyanate anion concentration, with the increase of thiocyanate concentration, more ion bindings occurring between thiocyanate anions and PNIPAM chains will result in the increase of the hydrophobicity of PNIPAM chains;when the increase of electrostatic repulsion is insufficient to overcome the hydrophobic interaction of PNIPAM chains, it will lead to the reduction of brush height and LCST at high thiocyanate anion concentration. Our theoretical results are consistent with the experimental observations, and provide a fundamental understanding of the effects of thiocyanate on the LCST of PNIPAM brushes.

Chloroform Aided Extraction Spectrophotometric Determination of Rhenium Using Thiocyanate Complexing Agent

A new technique is developed for quantitative determination of rhenium in aqueous media containing molybdenum, iron and copper ions. The method seems easier and more accurate than the traditional ones. It consists of the formation of rhenium thiocyanate complex, which is extracted with chloroform at the presence of hydrochloric acid. This complex is a highly visible light absorbent that can easily be detected with the aid of a spectrophotometer. The maximum absorbance (λmax) observed for this complex was in the visible range of 430-435 nm. The experimental results showed that in a concentration range from 0.5-8 mg/L, the absorbance behavior of the rhenium thiocyanate complex is followed to the Beer-Lambert law.

Characterization and structure analysis of the heterosolvate of erythromycin thiocyanate

Erythromycin thiocyanate is widely used for the production of other macrolide antibiotics. In this work, a novel heterosolvate of this pharmaceutical compound has been obtained and characterized for the first time, which was transformed from the dihydrate form in the acetone solvent through evaporation crystallization. Thermal behavior together with compositional analysis revealed that both water and acetone molecules participated in the formation of the crystal lattice which is rarely reported before. The general chemical name of the heterosolvate may be defined as erythromycin thiocyanate sesquihydrate hemiacetonate. Furthermore, studies on solid-state spectral analysis provided strong evidence of intermolecular hydrogen bonds in heterosolvate crystals. According to the crystal structure determined by single crystal X-ray diffraction, the formation mechanism of the heterosolvate is proposed in which strong multihydrogen bondings between water and solute molecules form the layer structure. While acetone molecules form single-hydrogen bonds with solutes and reside in channels between layers. This well explains why acetone solvent is easy to escape from the crystal structure during desolvation.

Synthesis and Crystal Structure of a New Three-dimensional Thiocyanate Supramolecular Compound [Cd(phen)(NCS)(SCN)]_n

The compound [Cd（phen）（NCS）（SCN）]n（phen = 1,10-phenanthroline） was synthe- sized under hydrothermal conditions and characterized by IR and single-crystal X-ray diffraction. The complex is of monoclinic, space group C2/c with a = 14.607（3）, b = 10.505（2）, c = 10.631（2）A,β = 115.14（3）^o, V = 1476.8（5）A^3, C14H8CdN4S2, Mr = 408.76, Z = 4, F（000） = 800, μ = 1.757 mm^-1 and Dc = 1.839 g/cm^3. The final R = 0.0409 and wR = 0.0811 for 1367 observed reflections （I 〉 2σ（I））. In the title compound, each cadmium atom is six-coordinated and connected with two adjacent metal ions by two NCS bridges, creating a zigzag chain. The neighboring chains are linked to each other by the weak van der Waals＇ S…S interactions and π…π interactions to form a new three-dimensional supramolecular framework.

Indirect Determination of CTMAB with Sodium Chloride and Ammonium Thiocyanate by Floatation and Separation of Zinc

A new method for indirect determination of cetyl-trimethyl ammonium bromide (CTMAB) with NaCl and NH4SCN by floatation and separation of zinc has been studied. The study shows that Zn(II) can associate with NH4SCN and CTMAB to form insoluble ternary ion-association complex, and the precipitate can float on the surface of the liquid phase. A good linear relationship is observed between the floatation yield (E%) of Zn(II) and the amount of CTMAB. On the ground, CTMAB can be indirectly determined by determining E% of Zn(II). The results were satisfactory.

Identification,structure elucidation and origin of a common pyridinium-thiocyanate intermediate in electrospray mass spectrometry among the benziamidazole-class proton pump inhibitors

During the analysis of benziamidazole-class irreversible proton pump inhibitors,an unusual mass spectral response with the mass-to-charge ratio at[Mt10]t intrigued us,as it couldn't be assigned to any literature known relevant structure,intermediate or adduct ion.Moreover,this mysterious mass pattern of[Mt10]t has been gradually observed by series of marketed proton pump inhibitors,viz.omeprazole,pantoprazole,lansoprazole and rabeprazole.All the previous attempts to isolate the corresponding component were unsuccessful.The investigation of present work addresses this kind of signal to a pyridinium thiocyanate mass spectral intermediate(10),which is the common fragment ion of series of labile aggregates.The origin of such aggregates can be traced to the reactive intermediates formed by acid-promoted degradation.These reactive intermediates tend to react with each other and give raise series of complicated aggregates systematically in a water/acetonitrile solution by electrospray ionization.The structure of the corresponding pyridinium thiocyanate species of omeprazole(10a)has been eventually characterized with the help of synthetic specimen(10a′).Our structural proposal as well as its origin was supported by in situ nuclear magnetic resonance,chemical derivatization and colorimetric experiments.