A hydrometallurgical process for refractory gold-bearing arsenosulfide concentrates at ambient temperature and pressure was presented, including fine grinding with intensified alkali-leaching （FGIAL）, enhanced agita...A hydrometallurgical process for refractory gold-bearing arsenosulfide concentrates at ambient temperature and pressure was presented, including fine grinding with intensified alkali-leaching （FGIAL）, enhanced agitation alkali-leaching （EAAL）, thiosulfate leaching and displacement. Experimental results on a refractory gold concentrate showed that the total consumption of NaOH in alkaline leaching is only 41% of those theoretically calculated under the conditions of full oxidization for the same amount of arse- nides and sulfides transformed into arsenates and sulfates, and 72.3% of gold is synchro-dissoluted by thiosulfate self-generated during alkaline leaching. After alkaline leaching, thiosulfate leaching was carried out for 24 h. The dissolution of gold is increased to 91.9% from 4.6% by cyanide without the pretreatment. The displacement of gold by zinc powder in the solution gets to 99.2%. Due to an amount of thiosulfate self-generated during alkaline leaching, the reagent addition in thiosulfate leaching afterwards is lower than the normal.展开更多
The dissolution of silver with thiosulfate and copper ions was studied in a batch-stirred reactor at 25 °C in the absence and presence of various ammonium ions and oxygen concentrations in the aqueous solution. L...The dissolution of silver with thiosulfate and copper ions was studied in a batch-stirred reactor at 25 °C in the absence and presence of various ammonium ions and oxygen concentrations in the aqueous solution. Leaching silver with 4 mg L-1oxygen in the aqueous solution requires high concentration of ammonium and thiosulfate ions. High silver dissolution is achieved at pH of high cupric tetraamine concentration, around pH 9.8, but a high degradation of thiosulfate ions is resulted from their oxidation by the presence of oxygen. When the oxygen concentration is below 1 mg L-1, dissolved silver thiosulfate species are fairly stable and the degradation of thiosulfate ions in the aqueous solution is low. Under these conditions,high silver dissolution is attained using low thiosulfate concentration. At the oxygen concentration of 4 mg L-1,dissolved silver thiosulfate species precipitate out of the aqueous solution significantly affecting silver dissolution.Precipitation of dissolved silver thiosulfate species occurs because of oxidation of the thiosulfate bonding to the silver.展开更多
基金This project was financially supported by the Natural Science Foundation of Liaoning Province of China (No.2001101015) and theFree Study Item of the Institute of Metal Research, Chinese Academy of Sciences (No.AM05-0866)
文摘A hydrometallurgical process for refractory gold-bearing arsenosulfide concentrates at ambient temperature and pressure was presented, including fine grinding with intensified alkali-leaching （FGIAL）, enhanced agitation alkali-leaching （EAAL）, thiosulfate leaching and displacement. Experimental results on a refractory gold concentrate showed that the total consumption of NaOH in alkaline leaching is only 41% of those theoretically calculated under the conditions of full oxidization for the same amount of arse- nides and sulfides transformed into arsenates and sulfates, and 72.3% of gold is synchro-dissoluted by thiosulfate self-generated during alkaline leaching. After alkaline leaching, thiosulfate leaching was carried out for 24 h. The dissolution of gold is increased to 91.9% from 4.6% by cyanide without the pretreatment. The displacement of gold by zinc powder in the solution gets to 99.2%. Due to an amount of thiosulfate self-generated during alkaline leaching, the reagent addition in thiosulfate leaching afterwards is lower than the normal.
基金Research and Technology Development Center, Administrative Services of Pennoles for the financial support of this Research Project
文摘The dissolution of silver with thiosulfate and copper ions was studied in a batch-stirred reactor at 25 °C in the absence and presence of various ammonium ions and oxygen concentrations in the aqueous solution. Leaching silver with 4 mg L-1oxygen in the aqueous solution requires high concentration of ammonium and thiosulfate ions. High silver dissolution is achieved at pH of high cupric tetraamine concentration, around pH 9.8, but a high degradation of thiosulfate ions is resulted from their oxidation by the presence of oxygen. When the oxygen concentration is below 1 mg L-1, dissolved silver thiosulfate species are fairly stable and the degradation of thiosulfate ions in the aqueous solution is low. Under these conditions,high silver dissolution is attained using low thiosulfate concentration. At the oxygen concentration of 4 mg L-1,dissolved silver thiosulfate species precipitate out of the aqueous solution significantly affecting silver dissolution.Precipitation of dissolved silver thiosulfate species occurs because of oxidation of the thiosulfate bonding to the silver.
