Thousand-kernel weight(TKW)is a measure of grain weight,a target of wheat breeding.The object of this study was to fine-map a stable quantitative trait loci(QTL)for TKW and identify its candidate gene in a recombinant...Thousand-kernel weight(TKW)is a measure of grain weight,a target of wheat breeding.The object of this study was to fine-map a stable quantitative trait loci(QTL)for TKW and identify its candidate gene in a recombinant inbred line(RIL)population derived from the cross of Kenong 9204(KN9204)and Jing411(J411).On a high-density genetic linkage map,24,26 and 25 QTL were associated with TKW,kernel length(KL),and kernel width(KW),respectively.A major and stable QTL,QTkw-2D,was mapped to an8.3 cM interval on chromosome arm 2DL.By saturation of polymorphic markers in its target region,QTkw-2D was confined to a 9.13 Mb physical interval using a secondary mapping population derived from a residually heterozygous line(F6:7).This interval was further narrowed to 2.52 Mb using QTkw-2D near-isogenic lines(NILs).NILs~(KN9204)had higher fresh and dry weights than NILsJ411at various grain-filling stages.The TKW and KW of NILs~(KN9204)were much higher than those of NILsJ411in field trials.By comparison of both DNA sequence and expression between KN9204 and J411,TraesCS2D02G460300.1(TraesKN2D01HG49350)was assigned as a candidate gene for QTkw-2D.This was confirmed by RNA sequencing(RNA-seq)of QTkw-2D NILs.These results provide the basis of map-based cloning of QTkw-2D,and DNA markers linked to the candidate gene may be used in marker-assisted selection.展开更多
Objective:Postpartum weight retention(PPWR)is a common problem among women after childbirth.The main objectives of this study are to understand the changes in body weight of breastfeeding mothers during long-term foll...Objective:Postpartum weight retention(PPWR)is a common problem among women after childbirth.The main objectives of this study are to understand the changes in body weight of breastfeeding mothers during long-term follow-up and preliminarily explore the relationship between maternal body weight and human milk composition,including macronutrients,leptin,and adiponectin.Methods:The study included a longitudinal cohort(122 mothers),and a cross-sectional cohort(37 mothers).The human milk,maternal weight,and dietary surveys were collected in the longitudinal cohort at different follow-up time points(1-14 days postpartum,2-4 months postpartum,5-7 months postpartum,and 12-17 months postpartum).The maternal body weight was analyzed using the responses in the survey questionnaires.A milk analyzer based on the mid-infrared spectroscopy(MIRS)was used to determine milk composition,and nutrition analysis software evaluated dietary intakes.In the cross-sectional cohort,participating mothers were asked to provide blood and human milk samples and pertinent information related to maternal body composition.Maternal body composition was measured by bioelectrical impedance analysis(BIA),while ELISA analyzed leptin and adiponectin in milk and serum.Results:At 5-7 months postpartum,the PPWR of breastfeeding mothers was(2.46±3.59)kg.At 12-17 months postpartum,the PPWR was(0.98±4.06)kg.PPWR was found to be negatively correlated with milk fat content within 14 days postpartum and positively correlated at 2-4 months postpartum.In addition,the maternal weight and body muscle mass were positively correlated with leptin and adiponectin in milk.Plasma leptin was positively correlated with the mother’s body weight,body mass index(BMI),FAT percentage,and body fat mass,while plasma adiponectin did not correlate with any parameter.The results also indicate that the PPWR did not correlate with leptin and adiponectin in plasma or milk.Conclusions:Breastfeeding mothers may retain considerable weight gain one year after delivery.Human milk composition may be related to changes in maternal body weight.Leptin and adiponectin in breast milk and leptin in plasma are associated with the maternal body composition.This study supports the notion that maternal nutritional status may affect offspring health through lactation,and future research should focus on exploring weight management of postpartum mothers.展开更多
This paper studies the optimal portfolio allocation of a fund manager when he bases decisions on both the absolute level of terminal relative performance and the change value of terminal relative performance compariso...This paper studies the optimal portfolio allocation of a fund manager when he bases decisions on both the absolute level of terminal relative performance and the change value of terminal relative performance comparison to a predefined reference point. We find the optimal investment strategy by maximizing a weighted average utility of a concave utility and an Sshaped utility via a concavification technique and the martingale method. Numerical results are carried out to show the impact of the extent to which the manager pays attention to the change of relative performance related to the reference point on the optimal terminal relative performance.展开更多
By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared h...By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.展开更多
A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble...A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.展开更多
The classification of functional data has drawn much attention in recent years.The main challenge is representing infinite-dimensional functional data by finite-dimensional features while utilizing those features to a...The classification of functional data has drawn much attention in recent years.The main challenge is representing infinite-dimensional functional data by finite-dimensional features while utilizing those features to achieve better classification accuracy.In this paper,we propose a mean-variance-based(MV)feature weighting method for classifying functional data or functional curves.In the feature extraction stage,each sample curve is approximated by B-splines to transfer features to the coefficients of the spline basis.After that,a feature weighting approach based on statistical principles is introduced by comprehensively considering the between-class differences and within-class variations of the coefficients.We also introduce a scaling parameter to adjust the gap between the weights of features.The new feature weighting approach can adaptively enhance noteworthy local features while mitigating the impact of confusing features.The algorithms for feature weighted K-nearest neighbor and support vector machine classifiers are both provided.Moreover,the new approach can be well integrated into existing functional data classifiers,such as the generalized functional linear model and functional linear discriminant analysis,resulting in a more accurate classification.The performance of the mean-variance-based classifiers is evaluated by simulation studies and real data.The results show that the newfeatureweighting approach significantly improves the classification accuracy for complex functional data.展开更多
Grain weight is one of the key components of wheat(Triticum aestivum L.)yield.Genetic manipulation of grain weight is an efficient approach for improving yield potential in breeding programs.A recombinant inbred line(...Grain weight is one of the key components of wheat(Triticum aestivum L.)yield.Genetic manipulation of grain weight is an efficient approach for improving yield potential in breeding programs.A recombinant inbred line(RIL)population derived from a cross between W7268 and Chuanyu 12(CY12)was employed to detect quantitative trait loci(QTLs)for thousand-grain weight(TGW),grain length(GL),grain width(GW),and the ratio of grain length to width(GLW)in six environments.Seven major QTLs,QGl.cib-2D,QGw.cib-2D,QGw.cib-3B,QGw.cib-4B.1,QGlw.cib-2D.1,QTgw.cib-2D.1 and QTgw.cib-3B.1,were consistently identified in at least four environments and the best linear unbiased estimation(BLUE)datasets,and they explained 2.61 to 34.85%of the phenotypic variance.Significant interactions were detected between the two major TGW QTLs and three major GW loci.In addition,QTgw.cib-3B.1 and QGw.cib-3B were co-located,and the improved TGW at this locus was contributed by GW.Unlike other loci,QTgw.cib-3B.1/QGw.cib-3B had no effect on grain number per spike(GNS).They were further validated in advanced lines using Kompetitive Allele Specific PCR(KASP)markers,and a comparison analysis indicated that QTgw.cib-3B.1/QGw.cib-3B is likely a novel locus.Six haplotypes were identified in the region of this QTL and their distribution frequencies varied between the landraces and cultivars.According to gene annotation,spatial expression patterns,ortholog analysis and sequence variation,the candidate gene of QTgw.cib-3B.1/QGw.cib-3B was predicted.Collectively,the major QTLs and KASP markers reported here provide valuable information for elucidating the genetic architecture of grain weight and for molecular marker-assisted breeding in grain yield improvement.展开更多
Cell migration plays a significant role in physiological and pathological processes.Understanding the characteristics of cell movement is crucial for comprehending biological processes such as cell functionality,cell ...Cell migration plays a significant role in physiological and pathological processes.Understanding the characteristics of cell movement is crucial for comprehending biological processes such as cell functionality,cell migration,and cell–cell interactions.One of the fundamental characteristics of cell movement is the specific distribution of cell speed,containing valuable information that still requires comprehensive understanding.This article investigates the distribution of mean velocities along cell trajectories,with a focus on optimizing the efficiency of cell food search in the context of the entire colony.We confirm that the specific velocity distribution in the experiments corresponds to an optimal search efficiency when spatial weighting is considered.The simulation results indicate that the distribution of average velocity does not align with the optimal search efficiency when employing average spatial weighting.However,when considering the distribution of central spatial weighting,the specific velocity distribution in the experiment is shown to correspond to the optimal search efficiency.Our simulations reveal that for any given distribution of average velocity,a specific central spatial weighting can be identified among the possible central spatial weighting that aligns with the optimal search strategy.Additionally,our work presents a method for determining the spatial weights embedded in the velocity distribution of cell movement.Our results have provided new avenues for further investigation of significant topics,such as relationship between cell behavior and environmental conditions throughout their evolutionary history,and how cells achieve collective cooperation through cell-cell communication.展开更多
With increasing drilling depth and large dosage of weighting materials,drilling fluids with high solid content are characterized by poor stability,high viscosity,large water loss,and thick mud cake,easier leading to r...With increasing drilling depth and large dosage of weighting materials,drilling fluids with high solid content are characterized by poor stability,high viscosity,large water loss,and thick mud cake,easier leading to reservoir damage and wellbore instability.In this paper,micronized barite(MB)was modified(mMB)by grafting with hydrophilic polymer onto the surface through the free radical polymerization to displace conventional API barite partly.The suspension stability of water-based drilling fluids(WBDFs)weighted with API barite:mMB=2:1 in 600 g was significantly enhanced compared with that with API barite/WBDFs,exhibiting the static sag factor within 0.54 and the whole stability index of 2.The viscosity and yield point reached the minimum,with a reduction of more than 40%compared with API barite only at the same density.Through multi-stage filling and dense accumulation of weighting materials and clays,filtration loss was decreased,mud cake quality was improved,and simultaneously it had great reservoir protection performance,and the permeability recovery rate reached 87%.In addition,it also effectively improved the lubricity of WBDFs.The sticking coefficient of mud cake was reduced by 53.4%,and the friction coefficient was 0.2603.Therefore,mMB can serve as a versatile additive to control the density,rheology,filtration,and stability of WBDFs weighted with API barite,thus regulating comprehensive performance and achieving reservoir protection capacity.This work opened up a new path for the productive drilling of extremely deep and intricate wells by providing an efficient method for managing the performance of high-density WBDFs.展开更多
PHT-splines are defined as polynomial splines over hierarchical T-meshes with very efficient local refinement properties.The original PHT-spline basis functions constructed by the truncation mechanism have a decay phe...PHT-splines are defined as polynomial splines over hierarchical T-meshes with very efficient local refinement properties.The original PHT-spline basis functions constructed by the truncation mechanism have a decay phenomenon,resulting in numerical instability.The non-decay basis functions are constructed as the B-splines that are defined on the 2×2 tensor product meshes associated with basis vertices in Kang et al.,but at the cost of losing the partition of unity.In the field of finite element analysis and topology optimization,forming the partition of unity is the default ingredient for constructing basis functions of approximate spaces.In this paper,we will show that the non-decay PHT-spline basis functions proposed by Kang et al.can be appropriately modified to form a partition of unity.Each non-decay basis function is multiplied by a positive weight to form the weighted basis.The weights are solved such that the sum of weighted bases is equal to 1 on the domain.We provide two methods for calculatingweights,based on geometric information of basis functions and the subdivision of PHT-splines.Weights are given in the form of explicit formulas and can be efficiently calculated.We also prove that the weights on the admissible hierarchical T-meshes are positive.展开更多
Introduction: Low birth weight (LBW) is defined by the World Health Organization (WHO) as a birth weight strictly below 2500 g, whatever the term of pregnancy. It constitutes a major public health problem, both in dev...Introduction: Low birth weight (LBW) is defined by the World Health Organization (WHO) as a birth weight strictly below 2500 g, whatever the term of pregnancy. It constitutes a major public health problem, both in developed and developing countries, due to its magnitude and its strong association with infant morbidity and mortality. Main objective was to study the factors associated with the occurrence of small-for-gestational-age newborns in Douala. Methodology: We carried out a cross-sectional analytical study with prospective data collection using a technical pretested sheet in the maternity wards of the Douala General Hospital, the Laquintinie Hospital, and the District hospitals of Deido, Nylon and Bonassama over a period of 4 months (January to April 2020). We were interested in any newborn, born alive, vaginally or by cesarean section, of low weight, seen in the first 24 hours from a full-term single-fetal pregnancy whose mother had given her consent. Our sampling was consecutive and non-exhaustive. We excluded newborns whose term was unclear and those with congenital malformations or signs of embryo-foetopathy. Data collection was done using survey sheets. Statistical analyzes were carried out with CS Pro 7.3 and SPSS version 25.0 software. The Student, Chi-square and Fischer tests were used to compare the means of the variables, the percentages with a significance threshold P value Results: During the study period, 305 full-term newborns were included, divided into 172 boys and 133 girls. The percentage of small-for-gestational-age newborns was 9.8%;after multivariate analysis by logistic regression to eliminate confounding factors, we found maternal factors associated with small for gestational age newborns;maternal age less than 20 years, primiparity, gestational age (37 - 38), a delay in prenatal visits greater than 14 weeks, anemia in pregnancy, positive toxoplasmosis serology in pregnancy, a body mass index of Conclusion: Our study revealed the potential determinants of low birth weight at term in the Cameroonian urban context and specifically in Douala.展开更多
The current existing problem of deep learning framework for the detection and segmentation of electrical equipment is dominantly related to low precision.Because of the reliable,safe and easy-to-operate technology pro...The current existing problem of deep learning framework for the detection and segmentation of electrical equipment is dominantly related to low precision.Because of the reliable,safe and easy-to-operate technology provided by deep learning-based video surveillance for unmanned inspection of electrical equipment,this paper uses the bottleneck attention module(BAM)attention mechanism to improve the Solov2 model and proposes a new electrical equipment segmentation mode.Firstly,the BAM attention mechanism is integrated into the feature extraction network to adaptively learn the correlation between feature channels,thereby improving the expression ability of the feature map;secondly,the weighted sum of CrossEntropy Loss and Dice loss is designed as the mask loss to improve the segmentation accuracy and robustness of the model;finally,the non-maximal suppression(NMS)algorithm to better handle the overlap problem in instance segmentation.Experimental results show that the proposed method achieves an average segmentation accuracy of mAP of 80.4% on three types of electrical equipment datasets,including transformers,insulators and voltage transformers,which improve the detection accuracy by more than 5.7% compared with the original Solov2 model.The segmentation model proposed can provide a focusing technical means for the intelligent management of power systems.展开更多
Objective This study employs the Geographically and Temporally Weighted Regression(GTWR)model to assess the impact of meteorological elements and imported cases on dengue fever outbreaks,emphasizing the spatial-tempor...Objective This study employs the Geographically and Temporally Weighted Regression(GTWR)model to assess the impact of meteorological elements and imported cases on dengue fever outbreaks,emphasizing the spatial-temporal variability of these factors in border regions.Methods We conducted a descriptive analysis of dengue fever’s temporal-spatial distribution in Yunnan border areas.Utilizing annual data from 2013 to 2019,with each county in the Yunnan border serving as a spatial unit,we constructed a GTWR model to investigate the determinants of dengue fever and their spatio-temporal heterogeneity in this region.Results The GTWR model,proving more effective than Ordinary Least Squares(OLS)analysis,identified significant spatial and temporal heterogeneity in factors influencing dengue fever’s spread along the Yunnan border.Notably,the GTWR model revealed a substantial variation in the relationship between indigenous dengue fever incidence,meteorological variables,and imported cases across different counties.Conclusion In the Yunnan border areas,local dengue incidence is affected by temperature,humidity,precipitation,wind speed,and imported cases,with these factors’influence exhibiting notable spatial and temporal variation.展开更多
Background: Since 2012, the World Health Organization has recommended intermittent preventive treatment with sulfadoxine-pyrimethamine (IPT-SP) to prevent malaria-related complications in pregnant women. Ten years fol...Background: Since 2012, the World Health Organization has recommended intermittent preventive treatment with sulfadoxine-pyrimethamine (IPT-SP) to prevent malaria-related complications in pregnant women. Ten years following these recommendations, we conducted this study to estimate the coverage for three doses of IPT-SP (IPT3) as well as the prevalence of low birth weight (LBW), and its associated factors in Lomé (Togo) in 2021. Methods: A cross-sectional study was conducted between January and March 2021. An exhaustive recruitment of women and their newborns was carried out in the maternity wards of the Sylvanus Olympio University Hospital Center. Data from antenatal consultations and clinical data of the newborns were collected. Multivariate logistic regression was carried out to determine factors associated with LBW. Results: A total of 252 mother-child pairs were included in this study. Median age of the mothers was 27 years, IQR [24-31]. More than a third (35.3%) of the mothers were primigravida. IPT3 coverage was 66.7% and 14.7% of newborns had a LBW. The prevalence of LBW was 33.3% [23.3-43.4] in women who had received fewer than 3 doses of IPT-SP and 5.4% [2.0-8.8] in those who had received at least 3 doses of IPT-SP (p Conclusion: Ten years following recommendations of the WHO on IPT-SP, malaria prevention based on IPT-SP is not optimal among pregnant women in Lomé, and the proportion of LBW children remains high. Actions to strengthen the three-dose IPT-SP policy are needed to prevent malaria and its consequences among newborns in Togo.展开更多
Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunb...Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.展开更多
Image classification and unsupervised image segmentation can be achieved using the Gaussian mixture model.Although the Gaussian mixture model enhances the flexibility of image segmentation,it does not reflect spatial ...Image classification and unsupervised image segmentation can be achieved using the Gaussian mixture model.Although the Gaussian mixture model enhances the flexibility of image segmentation,it does not reflect spatial information and is sensitive to the segmentation parameter.In this study,we first present an efficient algorithm that incorporates spatial information into the Gaussian mixture model(GMM)without parameter estimation.The proposed model highlights the residual region with considerable information and constructs color saliency.Second,we incorporate the content-based color saliency as spatial information in the Gaussian mixture model.The segmentation is performed by clustering each pixel into an appropriate component according to the expectation maximization and maximum criteria.Finally,the random color histogram assigns a unique color to each cluster and creates an attractive color by default for segmentation.A random color histogram serves as an effective tool for data visualization and is instrumental in the creation of generative art,facilitating both analytical and aesthetic objectives.For experiments,we have used the Berkeley segmentation dataset BSDS-500 and Microsoft Research in Cambridge dataset.In the study,the proposed model showcases notable advancements in unsupervised image segmentation,with probabilistic rand index(PRI)values reaching 0.80,BDE scores as low as 12.25 and 12.02,compactness variations at 0.59 and 0.7,and variation of information(VI)reduced to 2.0 and 1.49 for the BSDS-500 and MSRC datasets,respectively,outperforming current leading-edge methods and yielding more precise segmentations.展开更多
Weighted total least squares(WTLS)have been regarded as the standard tool for the errors-in-variables(EIV)model in which all the elements in the observation vector and the coefficient matrix are contaminated with rand...Weighted total least squares(WTLS)have been regarded as the standard tool for the errors-in-variables(EIV)model in which all the elements in the observation vector and the coefficient matrix are contaminated with random errors.However,in many geodetic applications,some elements are error-free and some random observations appear repeatedly in different positions in the augmented coefficient matrix.It is called the linear structured EIV(LSEIV)model.Two kinds of methods are proposed for the LSEIV model from functional and stochastic modifications.On the one hand,the functional part of the LSEIV model is modified into the errors-in-observations(EIO)model.On the other hand,the stochastic model is modified by applying the Moore-Penrose inverse of the cofactor matrix.The algorithms are derived through the Lagrange multipliers method and linear approximation.The estimation principles and iterative formula of the parameters are proven to be consistent.The first-order approximate variance-covariance matrix(VCM)of the parameters is also derived.A numerical example is given to compare the performances of our proposed three algorithms with the STLS approach.Afterwards,the least squares(LS),total least squares(TLS)and linear structured weighted total least squares(LSWTLS)solutions are compared and the accuracy evaluation formula is proven to be feasible and effective.Finally,the LSWTLS is applied to the field of deformation analysis,which yields a better result than the traditional LS and TLS estimations.展开更多
Background: Kangaroo Mother Care is a simple safe method used to care for low-birth-weight babies. Low-birth-weight is a global public health issue that pose significant challenge to perinatal care systems. Globally, ...Background: Kangaroo Mother Care is a simple safe method used to care for low-birth-weight babies. Low-birth-weight is a global public health issue that pose significant challenge to perinatal care systems. Globally, complications due to low-birth-weight are the leading cause of neonatal mortality, resulting in an estimated 1 million deaths annually. Kangaroo Mother Care (KMC) is a low-cost method of care for low-birth-weight infants in areas with inadequate incubators and power outages with positive outcomes. Objectives: To assess factors influencing acceptability of Kangaroo Mother Care (KMC) in NICU at Arthur Davison Children’s Hospital in Ndola, Zambia. Methodology: A cross sectional quantitative analytical study design was used. The study was conducted at Arthur Davison Children’s Hospital (ADCH) in Ndola, Zambia. The purposive sampling method was used to select the study participants and a total of 129 mothers with Low Weight Babies A were selected to participate structured closed ended questionnaire was used to collect data from the participants using an interview. Data was analyzed using a Statistical Package for Social Scientists (SPSS) software version 26. Cross tabulations were done to determine association of variables using a Chi square (x<sup>2</sup>) test at 95% confidence interval and were assumptions where not met, fishers exact test was used. Multivariate binary logistic regression analysis was used to quantify the relationship between the dependent and independent variables. Results: Most of the respondents had male babies 77%, 69% of the babies weighed 1000 g - 1400 g, majority 79% had normal delivery, 71% of the respondents were multigravida and most of the respondents 79% were married. The study reviewed that 85% of those who attained secondary education accepted KMC, 74% of the respondents without monthly income accepted KMC, 80% of the respondents had positive attitude and accepted KMC. 82% of the respondents who had positive perception accepted KMC. Conclusion: Acceptance of Kangaroo Mother Care (KMC) among 75% of the mothers underscores its widespread favourability as a beneficial method for infant care.展开更多
Though atomic decomposition is a very useful tool for studying the boundedness on Hardy spaces for some sublinear operators,untill now,the boundedness of operators on weighted Hardy spaces in a multi-parameter setting...Though atomic decomposition is a very useful tool for studying the boundedness on Hardy spaces for some sublinear operators,untill now,the boundedness of operators on weighted Hardy spaces in a multi-parameter setting has been established only by almost orthogonality estimates.In this paper,we mainly establish the boundedness on weighted multi-parameter local Hardy spaces via atomic decomposition.展开更多
The large-scale multi-objective optimization algorithm(LSMOA),based on the grouping of decision variables,is an advanced method for handling high-dimensional decision variables.However,in practical problems,the intera...The large-scale multi-objective optimization algorithm(LSMOA),based on the grouping of decision variables,is an advanced method for handling high-dimensional decision variables.However,in practical problems,the interaction among decision variables is intricate,leading to large group sizes and suboptimal optimization effects;hence a large-scale multi-objective optimization algorithm based on weighted overlapping grouping of decision variables(MOEAWOD)is proposed in this paper.Initially,the decision variables are perturbed and categorized into convergence and diversity variables;subsequently,the convergence variables are subdivided into groups based on the interactions among different decision variables.If the size of a group surpasses the set threshold,that group undergoes a process of weighting and overlapping grouping.Specifically,the interaction strength is evaluated based on the interaction frequency and number of objectives among various decision variables.The decision variable with the highest interaction in the group is identified and disregarded,and the remaining variables are then reclassified into subgroups.Finally,the decision variable with the strongest interaction is added to each subgroup.MOEAWOD minimizes the interactivity between different groups and maximizes the interactivity of decision variables within groups,which contributed to the optimized direction of convergence and diversity exploration with different groups.MOEAWOD was subjected to testing on 18 benchmark large-scale optimization problems,and the experimental results demonstrate the effectiveness of our methods.Compared with the other algorithms,our method is still at an advantage.展开更多
基金jointly supported by the National Natural Science Foundation of China(32272056,U22A6009,31671673,and 31871612)Hebei Natural Science Foundation(C2021205013,C2022204202)+1 种基金Talents Program of Hebei Agricultural University in China(YJ2021016)China Agriculture Research System of MOF and MARA(CARS-03)。
文摘Thousand-kernel weight(TKW)is a measure of grain weight,a target of wheat breeding.The object of this study was to fine-map a stable quantitative trait loci(QTL)for TKW and identify its candidate gene in a recombinant inbred line(RIL)population derived from the cross of Kenong 9204(KN9204)and Jing411(J411).On a high-density genetic linkage map,24,26 and 25 QTL were associated with TKW,kernel length(KL),and kernel width(KW),respectively.A major and stable QTL,QTkw-2D,was mapped to an8.3 cM interval on chromosome arm 2DL.By saturation of polymorphic markers in its target region,QTkw-2D was confined to a 9.13 Mb physical interval using a secondary mapping population derived from a residually heterozygous line(F6:7).This interval was further narrowed to 2.52 Mb using QTkw-2D near-isogenic lines(NILs).NILs~(KN9204)had higher fresh and dry weights than NILsJ411at various grain-filling stages.The TKW and KW of NILs~(KN9204)were much higher than those of NILsJ411in field trials.By comparison of both DNA sequence and expression between KN9204 and J411,TraesCS2D02G460300.1(TraesKN2D01HG49350)was assigned as a candidate gene for QTkw-2D.This was confirmed by RNA sequencing(RNA-seq)of QTkw-2D NILs.These results provide the basis of map-based cloning of QTkw-2D,and DNA markers linked to the candidate gene may be used in marker-assisted selection.
基金supported by grants from the Shanghai Key Laboratory of Pediatric Gastroenterology and Nutrition(17dz2272000)Foundation of Shanghai Municipal Health Commission(Key weak discipline construction project 2019ZB0101)the Scientific research fund of China Nutrition Society(CNSHPNK2021-16)。
文摘Objective:Postpartum weight retention(PPWR)is a common problem among women after childbirth.The main objectives of this study are to understand the changes in body weight of breastfeeding mothers during long-term follow-up and preliminarily explore the relationship between maternal body weight and human milk composition,including macronutrients,leptin,and adiponectin.Methods:The study included a longitudinal cohort(122 mothers),and a cross-sectional cohort(37 mothers).The human milk,maternal weight,and dietary surveys were collected in the longitudinal cohort at different follow-up time points(1-14 days postpartum,2-4 months postpartum,5-7 months postpartum,and 12-17 months postpartum).The maternal body weight was analyzed using the responses in the survey questionnaires.A milk analyzer based on the mid-infrared spectroscopy(MIRS)was used to determine milk composition,and nutrition analysis software evaluated dietary intakes.In the cross-sectional cohort,participating mothers were asked to provide blood and human milk samples and pertinent information related to maternal body composition.Maternal body composition was measured by bioelectrical impedance analysis(BIA),while ELISA analyzed leptin and adiponectin in milk and serum.Results:At 5-7 months postpartum,the PPWR of breastfeeding mothers was(2.46±3.59)kg.At 12-17 months postpartum,the PPWR was(0.98±4.06)kg.PPWR was found to be negatively correlated with milk fat content within 14 days postpartum and positively correlated at 2-4 months postpartum.In addition,the maternal weight and body muscle mass were positively correlated with leptin and adiponectin in milk.Plasma leptin was positively correlated with the mother’s body weight,body mass index(BMI),FAT percentage,and body fat mass,while plasma adiponectin did not correlate with any parameter.The results also indicate that the PPWR did not correlate with leptin and adiponectin in plasma or milk.Conclusions:Breastfeeding mothers may retain considerable weight gain one year after delivery.Human milk composition may be related to changes in maternal body weight.Leptin and adiponectin in breast milk and leptin in plasma are associated with the maternal body composition.This study supports the notion that maternal nutritional status may affect offspring health through lactation,and future research should focus on exploring weight management of postpartum mothers.
基金Supported by the National Natural Science Foundation of China(12071335)the Humanities and Social Science Research Projects in Ministry of Education(20YJAZH025).
文摘This paper studies the optimal portfolio allocation of a fund manager when he bases decisions on both the absolute level of terminal relative performance and the change value of terminal relative performance comparison to a predefined reference point. We find the optimal investment strategy by maximizing a weighted average utility of a concave utility and an Sshaped utility via a concavification technique and the martingale method. Numerical results are carried out to show the impact of the extent to which the manager pays attention to the change of relative performance related to the reference point on the optimal terminal relative performance.
基金Funded by the State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan Univesity of Technology。
文摘By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.
基金Project supported by the National Key Research and Development Program of China (Grant No.2021YFB3900701)the Science and Technology Plan Project of the State Administration for Market Regulation of China (Grant No.2023MK178)the National Natural Science Foundation of China (Grant No.42227802)。
文摘A redundant-subspace-weighting(RSW)-based approach is proposed to enhance the frequency stability on a time scale of a clock ensemble.In this method,multiple overlapping subspaces are constructed in the clock ensemble,and the weight of each clock in this ensemble is defined by using the spatial covariance matrix.The superimposition average of covariances in different subspaces reduces the correlations between clocks in the same laboratory to some extent.After optimizing the parameters of this weighting procedure,the frequency stabilities of virtual clock ensembles are significantly improved in most cases.
基金the National Social Science Foundation of China(Grant No.22BTJ035).
文摘The classification of functional data has drawn much attention in recent years.The main challenge is representing infinite-dimensional functional data by finite-dimensional features while utilizing those features to achieve better classification accuracy.In this paper,we propose a mean-variance-based(MV)feature weighting method for classifying functional data or functional curves.In the feature extraction stage,each sample curve is approximated by B-splines to transfer features to the coefficients of the spline basis.After that,a feature weighting approach based on statistical principles is introduced by comprehensively considering the between-class differences and within-class variations of the coefficients.We also introduce a scaling parameter to adjust the gap between the weights of features.The new feature weighting approach can adaptively enhance noteworthy local features while mitigating the impact of confusing features.The algorithms for feature weighted K-nearest neighbor and support vector machine classifiers are both provided.Moreover,the new approach can be well integrated into existing functional data classifiers,such as the generalized functional linear model and functional linear discriminant analysis,resulting in a more accurate classification.The performance of the mean-variance-based classifiers is evaluated by simulation studies and real data.The results show that the newfeatureweighting approach significantly improves the classification accuracy for complex functional data.
基金supported by the Major Program of National Agricultural Science and Technology of China(NK20220607)the West Light Foundation of the Chinese Academy of Sciences(2022XBZG_XBQNXZ_A_001)the Sichuan Science and Technology Program,China(2022ZDZX0014)。
文摘Grain weight is one of the key components of wheat(Triticum aestivum L.)yield.Genetic manipulation of grain weight is an efficient approach for improving yield potential in breeding programs.A recombinant inbred line(RIL)population derived from a cross between W7268 and Chuanyu 12(CY12)was employed to detect quantitative trait loci(QTLs)for thousand-grain weight(TGW),grain length(GL),grain width(GW),and the ratio of grain length to width(GLW)in six environments.Seven major QTLs,QGl.cib-2D,QGw.cib-2D,QGw.cib-3B,QGw.cib-4B.1,QGlw.cib-2D.1,QTgw.cib-2D.1 and QTgw.cib-3B.1,were consistently identified in at least four environments and the best linear unbiased estimation(BLUE)datasets,and they explained 2.61 to 34.85%of the phenotypic variance.Significant interactions were detected between the two major TGW QTLs and three major GW loci.In addition,QTgw.cib-3B.1 and QGw.cib-3B were co-located,and the improved TGW at this locus was contributed by GW.Unlike other loci,QTgw.cib-3B.1/QGw.cib-3B had no effect on grain number per spike(GNS).They were further validated in advanced lines using Kompetitive Allele Specific PCR(KASP)markers,and a comparison analysis indicated that QTgw.cib-3B.1/QGw.cib-3B is likely a novel locus.Six haplotypes were identified in the region of this QTL and their distribution frequencies varied between the landraces and cultivars.According to gene annotation,spatial expression patterns,ortholog analysis and sequence variation,the candidate gene of QTgw.cib-3B.1/QGw.cib-3B was predicted.Collectively,the major QTLs and KASP markers reported here provide valuable information for elucidating the genetic architecture of grain weight and for molecular marker-assisted breeding in grain yield improvement.
基金Project supported by the National Natural Science Foundation of China(Grant No.31971183).
文摘Cell migration plays a significant role in physiological and pathological processes.Understanding the characteristics of cell movement is crucial for comprehending biological processes such as cell functionality,cell migration,and cell–cell interactions.One of the fundamental characteristics of cell movement is the specific distribution of cell speed,containing valuable information that still requires comprehensive understanding.This article investigates the distribution of mean velocities along cell trajectories,with a focus on optimizing the efficiency of cell food search in the context of the entire colony.We confirm that the specific velocity distribution in the experiments corresponds to an optimal search efficiency when spatial weighting is considered.The simulation results indicate that the distribution of average velocity does not align with the optimal search efficiency when employing average spatial weighting.However,when considering the distribution of central spatial weighting,the specific velocity distribution in the experiment is shown to correspond to the optimal search efficiency.Our simulations reveal that for any given distribution of average velocity,a specific central spatial weighting can be identified among the possible central spatial weighting that aligns with the optimal search strategy.Additionally,our work presents a method for determining the spatial weights embedded in the velocity distribution of cell movement.Our results have provided new avenues for further investigation of significant topics,such as relationship between cell behavior and environmental conditions throughout their evolutionary history,and how cells achieve collective cooperation through cell-cell communication.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51991361)the foundation of China University of Petroleum(Beijing)(Grant No.2462021YXZZ002).
文摘With increasing drilling depth and large dosage of weighting materials,drilling fluids with high solid content are characterized by poor stability,high viscosity,large water loss,and thick mud cake,easier leading to reservoir damage and wellbore instability.In this paper,micronized barite(MB)was modified(mMB)by grafting with hydrophilic polymer onto the surface through the free radical polymerization to displace conventional API barite partly.The suspension stability of water-based drilling fluids(WBDFs)weighted with API barite:mMB=2:1 in 600 g was significantly enhanced compared with that with API barite/WBDFs,exhibiting the static sag factor within 0.54 and the whole stability index of 2.The viscosity and yield point reached the minimum,with a reduction of more than 40%compared with API barite only at the same density.Through multi-stage filling and dense accumulation of weighting materials and clays,filtration loss was decreased,mud cake quality was improved,and simultaneously it had great reservoir protection performance,and the permeability recovery rate reached 87%.In addition,it also effectively improved the lubricity of WBDFs.The sticking coefficient of mud cake was reduced by 53.4%,and the friction coefficient was 0.2603.Therefore,mMB can serve as a versatile additive to control the density,rheology,filtration,and stability of WBDFs weighted with API barite,thus regulating comprehensive performance and achieving reservoir protection capacity.This work opened up a new path for the productive drilling of extremely deep and intricate wells by providing an efficient method for managing the performance of high-density WBDFs.
基金The work was supported by the NSF of China(No.11801393)the Natural Science Foundation of Jiangsu Province,China(No.BK20180831).
文摘PHT-splines are defined as polynomial splines over hierarchical T-meshes with very efficient local refinement properties.The original PHT-spline basis functions constructed by the truncation mechanism have a decay phenomenon,resulting in numerical instability.The non-decay basis functions are constructed as the B-splines that are defined on the 2×2 tensor product meshes associated with basis vertices in Kang et al.,but at the cost of losing the partition of unity.In the field of finite element analysis and topology optimization,forming the partition of unity is the default ingredient for constructing basis functions of approximate spaces.In this paper,we will show that the non-decay PHT-spline basis functions proposed by Kang et al.can be appropriately modified to form a partition of unity.Each non-decay basis function is multiplied by a positive weight to form the weighted basis.The weights are solved such that the sum of weighted bases is equal to 1 on the domain.We provide two methods for calculatingweights,based on geometric information of basis functions and the subdivision of PHT-splines.Weights are given in the form of explicit formulas and can be efficiently calculated.We also prove that the weights on the admissible hierarchical T-meshes are positive.
文摘Introduction: Low birth weight (LBW) is defined by the World Health Organization (WHO) as a birth weight strictly below 2500 g, whatever the term of pregnancy. It constitutes a major public health problem, both in developed and developing countries, due to its magnitude and its strong association with infant morbidity and mortality. Main objective was to study the factors associated with the occurrence of small-for-gestational-age newborns in Douala. Methodology: We carried out a cross-sectional analytical study with prospective data collection using a technical pretested sheet in the maternity wards of the Douala General Hospital, the Laquintinie Hospital, and the District hospitals of Deido, Nylon and Bonassama over a period of 4 months (January to April 2020). We were interested in any newborn, born alive, vaginally or by cesarean section, of low weight, seen in the first 24 hours from a full-term single-fetal pregnancy whose mother had given her consent. Our sampling was consecutive and non-exhaustive. We excluded newborns whose term was unclear and those with congenital malformations or signs of embryo-foetopathy. Data collection was done using survey sheets. Statistical analyzes were carried out with CS Pro 7.3 and SPSS version 25.0 software. The Student, Chi-square and Fischer tests were used to compare the means of the variables, the percentages with a significance threshold P value Results: During the study period, 305 full-term newborns were included, divided into 172 boys and 133 girls. The percentage of small-for-gestational-age newborns was 9.8%;after multivariate analysis by logistic regression to eliminate confounding factors, we found maternal factors associated with small for gestational age newborns;maternal age less than 20 years, primiparity, gestational age (37 - 38), a delay in prenatal visits greater than 14 weeks, anemia in pregnancy, positive toxoplasmosis serology in pregnancy, a body mass index of Conclusion: Our study revealed the potential determinants of low birth weight at term in the Cameroonian urban context and specifically in Douala.
基金Jilin Science and Technology Development Plan Project(No.20200403075SF)Doctoral Research Start-Up Fund of Northeast Electric Power University(No.BSJXM-2018202).
文摘The current existing problem of deep learning framework for the detection and segmentation of electrical equipment is dominantly related to low precision.Because of the reliable,safe and easy-to-operate technology provided by deep learning-based video surveillance for unmanned inspection of electrical equipment,this paper uses the bottleneck attention module(BAM)attention mechanism to improve the Solov2 model and proposes a new electrical equipment segmentation mode.Firstly,the BAM attention mechanism is integrated into the feature extraction network to adaptively learn the correlation between feature channels,thereby improving the expression ability of the feature map;secondly,the weighted sum of CrossEntropy Loss and Dice loss is designed as the mask loss to improve the segmentation accuracy and robustness of the model;finally,the non-maximal suppression(NMS)algorithm to better handle the overlap problem in instance segmentation.Experimental results show that the proposed method achieves an average segmentation accuracy of mAP of 80.4% on three types of electrical equipment datasets,including transformers,insulators and voltage transformers,which improve the detection accuracy by more than 5.7% compared with the original Solov2 model.The segmentation model proposed can provide a focusing technical means for the intelligent management of power systems.
基金supported by National Science and Technology Infrastructure Platform National Population and Health Science Data Sharing Service Platform Public Health Science Data Center[NCMI-ZB01N-201905]。
文摘Objective This study employs the Geographically and Temporally Weighted Regression(GTWR)model to assess the impact of meteorological elements and imported cases on dengue fever outbreaks,emphasizing the spatial-temporal variability of these factors in border regions.Methods We conducted a descriptive analysis of dengue fever’s temporal-spatial distribution in Yunnan border areas.Utilizing annual data from 2013 to 2019,with each county in the Yunnan border serving as a spatial unit,we constructed a GTWR model to investigate the determinants of dengue fever and their spatio-temporal heterogeneity in this region.Results The GTWR model,proving more effective than Ordinary Least Squares(OLS)analysis,identified significant spatial and temporal heterogeneity in factors influencing dengue fever’s spread along the Yunnan border.Notably,the GTWR model revealed a substantial variation in the relationship between indigenous dengue fever incidence,meteorological variables,and imported cases across different counties.Conclusion In the Yunnan border areas,local dengue incidence is affected by temperature,humidity,precipitation,wind speed,and imported cases,with these factors’influence exhibiting notable spatial and temporal variation.
文摘Background: Since 2012, the World Health Organization has recommended intermittent preventive treatment with sulfadoxine-pyrimethamine (IPT-SP) to prevent malaria-related complications in pregnant women. Ten years following these recommendations, we conducted this study to estimate the coverage for three doses of IPT-SP (IPT3) as well as the prevalence of low birth weight (LBW), and its associated factors in Lomé (Togo) in 2021. Methods: A cross-sectional study was conducted between January and March 2021. An exhaustive recruitment of women and their newborns was carried out in the maternity wards of the Sylvanus Olympio University Hospital Center. Data from antenatal consultations and clinical data of the newborns were collected. Multivariate logistic regression was carried out to determine factors associated with LBW. Results: A total of 252 mother-child pairs were included in this study. Median age of the mothers was 27 years, IQR [24-31]. More than a third (35.3%) of the mothers were primigravida. IPT3 coverage was 66.7% and 14.7% of newborns had a LBW. The prevalence of LBW was 33.3% [23.3-43.4] in women who had received fewer than 3 doses of IPT-SP and 5.4% [2.0-8.8] in those who had received at least 3 doses of IPT-SP (p Conclusion: Ten years following recommendations of the WHO on IPT-SP, malaria prevention based on IPT-SP is not optimal among pregnant women in Lomé, and the proportion of LBW children remains high. Actions to strengthen the three-dose IPT-SP policy are needed to prevent malaria and its consequences among newborns in Togo.
基金supported by Korea Institute of Marine Science&Technology Promotion(KIMST)funded by the Ministry of Oceans and Fisheries,Korea(20220488)。
文摘Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.
基金supported by the MOE(Ministry of Education of China)Project of Humanities and Social Sciences(23YJAZH169)the Hubei Provincial Department of Education Outstanding Youth Scientific Innovation Team Support Foundation(T2020017)Henan Foreign Experts Project No.HNGD2023027.
文摘Image classification and unsupervised image segmentation can be achieved using the Gaussian mixture model.Although the Gaussian mixture model enhances the flexibility of image segmentation,it does not reflect spatial information and is sensitive to the segmentation parameter.In this study,we first present an efficient algorithm that incorporates spatial information into the Gaussian mixture model(GMM)without parameter estimation.The proposed model highlights the residual region with considerable information and constructs color saliency.Second,we incorporate the content-based color saliency as spatial information in the Gaussian mixture model.The segmentation is performed by clustering each pixel into an appropriate component according to the expectation maximization and maximum criteria.Finally,the random color histogram assigns a unique color to each cluster and creates an attractive color by default for segmentation.A random color histogram serves as an effective tool for data visualization and is instrumental in the creation of generative art,facilitating both analytical and aesthetic objectives.For experiments,we have used the Berkeley segmentation dataset BSDS-500 and Microsoft Research in Cambridge dataset.In the study,the proposed model showcases notable advancements in unsupervised image segmentation,with probabilistic rand index(PRI)values reaching 0.80,BDE scores as low as 12.25 and 12.02,compactness variations at 0.59 and 0.7,and variation of information(VI)reduced to 2.0 and 1.49 for the BSDS-500 and MSRC datasets,respectively,outperforming current leading-edge methods and yielding more precise segmentations.
基金the financial support of the National Natural Science Foundation of China(Grant No.42074016,42104025,42274057and 41704007)Hunan Provincial Natural Science Foundation of China(Grant No.2021JJ30244)Scientific Research Fund of Hunan Provincial Education Department(Grant No.22B0496)。
文摘Weighted total least squares(WTLS)have been regarded as the standard tool for the errors-in-variables(EIV)model in which all the elements in the observation vector and the coefficient matrix are contaminated with random errors.However,in many geodetic applications,some elements are error-free and some random observations appear repeatedly in different positions in the augmented coefficient matrix.It is called the linear structured EIV(LSEIV)model.Two kinds of methods are proposed for the LSEIV model from functional and stochastic modifications.On the one hand,the functional part of the LSEIV model is modified into the errors-in-observations(EIO)model.On the other hand,the stochastic model is modified by applying the Moore-Penrose inverse of the cofactor matrix.The algorithms are derived through the Lagrange multipliers method and linear approximation.The estimation principles and iterative formula of the parameters are proven to be consistent.The first-order approximate variance-covariance matrix(VCM)of the parameters is also derived.A numerical example is given to compare the performances of our proposed three algorithms with the STLS approach.Afterwards,the least squares(LS),total least squares(TLS)and linear structured weighted total least squares(LSWTLS)solutions are compared and the accuracy evaluation formula is proven to be feasible and effective.Finally,the LSWTLS is applied to the field of deformation analysis,which yields a better result than the traditional LS and TLS estimations.
文摘Background: Kangaroo Mother Care is a simple safe method used to care for low-birth-weight babies. Low-birth-weight is a global public health issue that pose significant challenge to perinatal care systems. Globally, complications due to low-birth-weight are the leading cause of neonatal mortality, resulting in an estimated 1 million deaths annually. Kangaroo Mother Care (KMC) is a low-cost method of care for low-birth-weight infants in areas with inadequate incubators and power outages with positive outcomes. Objectives: To assess factors influencing acceptability of Kangaroo Mother Care (KMC) in NICU at Arthur Davison Children’s Hospital in Ndola, Zambia. Methodology: A cross sectional quantitative analytical study design was used. The study was conducted at Arthur Davison Children’s Hospital (ADCH) in Ndola, Zambia. The purposive sampling method was used to select the study participants and a total of 129 mothers with Low Weight Babies A were selected to participate structured closed ended questionnaire was used to collect data from the participants using an interview. Data was analyzed using a Statistical Package for Social Scientists (SPSS) software version 26. Cross tabulations were done to determine association of variables using a Chi square (x<sup>2</sup>) test at 95% confidence interval and were assumptions where not met, fishers exact test was used. Multivariate binary logistic regression analysis was used to quantify the relationship between the dependent and independent variables. Results: Most of the respondents had male babies 77%, 69% of the babies weighed 1000 g - 1400 g, majority 79% had normal delivery, 71% of the respondents were multigravida and most of the respondents 79% were married. The study reviewed that 85% of those who attained secondary education accepted KMC, 74% of the respondents without monthly income accepted KMC, 80% of the respondents had positive attitude and accepted KMC. 82% of the respondents who had positive perception accepted KMC. Conclusion: Acceptance of Kangaroo Mother Care (KMC) among 75% of the mothers underscores its widespread favourability as a beneficial method for infant care.
文摘Though atomic decomposition is a very useful tool for studying the boundedness on Hardy spaces for some sublinear operators,untill now,the boundedness of operators on weighted Hardy spaces in a multi-parameter setting has been established only by almost orthogonality estimates.In this paper,we mainly establish the boundedness on weighted multi-parameter local Hardy spaces via atomic decomposition.
基金supported in part by the Central Government Guides Local Science and TechnologyDevelopment Funds(Grant No.YDZJSX2021A038)in part by theNational Natural Science Foundation of China under(Grant No.61806138)in part by the China University Industry-University-Research Collaborative Innovation Fund(Future Network Innovation Research and Application Project)(Grant 2021FNA04014).
文摘The large-scale multi-objective optimization algorithm(LSMOA),based on the grouping of decision variables,is an advanced method for handling high-dimensional decision variables.However,in practical problems,the interaction among decision variables is intricate,leading to large group sizes and suboptimal optimization effects;hence a large-scale multi-objective optimization algorithm based on weighted overlapping grouping of decision variables(MOEAWOD)is proposed in this paper.Initially,the decision variables are perturbed and categorized into convergence and diversity variables;subsequently,the convergence variables are subdivided into groups based on the interactions among different decision variables.If the size of a group surpasses the set threshold,that group undergoes a process of weighting and overlapping grouping.Specifically,the interaction strength is evaluated based on the interaction frequency and number of objectives among various decision variables.The decision variable with the highest interaction in the group is identified and disregarded,and the remaining variables are then reclassified into subgroups.Finally,the decision variable with the strongest interaction is added to each subgroup.MOEAWOD minimizes the interactivity between different groups and maximizes the interactivity of decision variables within groups,which contributed to the optimized direction of convergence and diversity exploration with different groups.MOEAWOD was subjected to testing on 18 benchmark large-scale optimization problems,and the experimental results demonstrate the effectiveness of our methods.Compared with the other algorithms,our method is still at an advantage.