Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi L...Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.展开更多
To better evaluate the three-dimensional bay health and predict the dynamic bay health conditions, a concept of numerical bay health was introduced and a method of numerical bay health evaluation（NBHE） was developed...To better evaluate the three-dimensional bay health and predict the dynamic bay health conditions, a concept of numerical bay health was introduced and a method of numerical bay health evaluation（NBHE） was developed.To support the NBHE method, a numerical bay health index（NBHI） system was constructed, which assess the natural and socio-economic effects on the entire bay. Five index groups are combined to formulate the NBHI,including geometry, hydrodynamics and sediment dynamics, bio-ecology, water quality and socio-economy.Each group has different number of indices selected and weighted using AHP method according to their importance. Data were mainly synthesized from a variety of numerical models together with monitoring programs, which provide superior to other approaches in discriminating data integrity and predicting data in future. The NBHE method using NBHI system was applied in the Yueqing Bay during spring tide in April 2007.According to the NBHE results, Sta. A, at the surface level of the estuarine mouth, has a healthy geometry condition, sub-healthy hydrodynamic and sediment dynamic condition, and unhealthy water quality and bioecology conditions. The integrated healthy score at Sta. A indicates its sub-healthy condition.展开更多
This paper points out that a successful numerical simulation is to construct a correct conceptional model which is very dose to the natural condition. A new model, two dimensional coupled three dimensional model (2D -...This paper points out that a successful numerical simulation is to construct a correct conceptional model which is very dose to the natural condition. A new model, two dimensional coupled three dimensional model (2D -3D ) is presented in the Present paper,which is the most suitable one for the dual - structured - aquifer system. An example of Wenyinghu area is shown.By using the 2D-3D model, a satisfied result of the simulated area is achieved.展开更多
Sets of cold-filled SMA-13 asphalt mixture were designed by means of orthogonal design method. The bending and low temperature creep tests of the cold-filled SMA-13 asphalt mixture were carried out. The related models...Sets of cold-filled SMA-13 asphalt mixture were designed by means of orthogonal design method. The bending and low temperature creep tests of the cold-filled SMA-13 asphalt mixture were carried out. The related models of the fractal dimension and the road performance evaluation index including low temperature bending failure strain εB and bending strength RB are established by using fractal theory. The model can be used to predict the low temperature performance of cold-filled SMA-13 asphalt mixture according to the design gradation, which can reduce the test workload and improve the working efficiency, so as to provide the reference for engineering design.展开更多
The National University Corporation Tsukuba University of Technology（NTUT） is the only institute of higher education for the hearing and the visually impaired in Japan. In our university, hearing or visually impaire...The National University Corporation Tsukuba University of Technology（NTUT） is the only institute of higher education for the hearing and the visually impaired in Japan. In our university, hearing or visually impaired students are studying to be technicians after they graduate, toward social independence. From previous experience of higher education for students with disabilities, effects are increased when modeling is used by the teachers involved in professional education. In the Mechanical Engineering Course, we are using modeling, to match the drawing and shape for beginning students. It includes support for enhancing one＇s view, and how to draw out the ability of mechanical engineering students for the basics. For students to study Mechanical Design and Drawing, Modeling of Gear Pump, Jack and Globe Valve are easily shown through drawings and the operation of each mechanism through sample drawings in the textbook. It is possible to make an opportunity to think about the machine mechanism. It will be shown by students＇ works. The assembling of the model triggers the need for form accuracy by making a function, and improves the quality of learning. It is possible that a three-dimensional molding machine can be produced through experiential learning by the model, and modeling with the dimension numerical data. Moreover, it is also embodied in a three-dimensional modeling which results in the image processing programming created. Confirming the improvement of the program through the shape with the quality. In the Department of Synthetic Design, students have chances to realize and self-evaluate from the design of the lamp shade with a complicated shape. In the Faculty of Health Science from Department of Health, high quality teaching of visually-impaired students through the use of bone model teaching materials has become possible in the medical-related courses.展开更多
基金supported by the National Hi-Tech Research and Development Program (863) of China (No.2007AA06A405, 2005AA6010100401)
文摘Water quality models are important tools to support the optimization of aquatic ecosystem rehabilitation programs and assess their efficiency. Basing on the flow conditions of the Daqinghe River Mouth of the Dianchi Lake, China, a two-dimensional water quality model was developed in the research. The hydrodynamics module was numerically solved by the alternating direction iteration （ADI） method. The parameters of the water quality module were obtained through the in situ experiments and the laboratory analyses that were conducted from 2006 to 2007. The model was calibrated and verified by the observation data in 2007. Among the four modelled key variables, i.e., water level, COD （in CODcr）, NH4＋-N and PO43-P the minimum value of the coefficient of determination （COD） was 0.69, indicating the model performed reasonably well. The developed model was then applied to simulate the water quality changes at a downstream cross-section assuming that the designed restoration programs were implemented. According to the simulated results, the restoration programs could cut down the loads of COD and PO43-P about 15%. Such a load reduction, unfortunately, would have very little effect on the NH4^＋-N removal. Moreover, the water quality at the outlet cross-section would be still in class V （3838-02）, indicating more measures should be taken to further reduce the loads. The study demonstrated the capability of water quality models to support aquatic ecosystem restorations.
基金The Key National Project under contract No.009zx07424-001Doctoral Fund of Ministry of Education of China under contract No.2012101110108+2 种基金MEL Visiting Fellowship Programthe Fundamental Research Funds for the Central UniversitiesZhejiang Provincial Natural Science Foundation of China under contract No.LQ16D060002
文摘To better evaluate the three-dimensional bay health and predict the dynamic bay health conditions, a concept of numerical bay health was introduced and a method of numerical bay health evaluation（NBHE） was developed.To support the NBHE method, a numerical bay health index（NBHI） system was constructed, which assess the natural and socio-economic effects on the entire bay. Five index groups are combined to formulate the NBHI,including geometry, hydrodynamics and sediment dynamics, bio-ecology, water quality and socio-economy.Each group has different number of indices selected and weighted using AHP method according to their importance. Data were mainly synthesized from a variety of numerical models together with monitoring programs, which provide superior to other approaches in discriminating data integrity and predicting data in future. The NBHE method using NBHI system was applied in the Yueqing Bay during spring tide in April 2007.According to the NBHE results, Sta. A, at the surface level of the estuarine mouth, has a healthy geometry condition, sub-healthy hydrodynamic and sediment dynamic condition, and unhealthy water quality and bioecology conditions. The integrated healthy score at Sta. A indicates its sub-healthy condition.
文摘This paper points out that a successful numerical simulation is to construct a correct conceptional model which is very dose to the natural condition. A new model, two dimensional coupled three dimensional model (2D -3D ) is presented in the Present paper,which is the most suitable one for the dual - structured - aquifer system. An example of Wenyinghu area is shown.By using the 2D-3D model, a satisfied result of the simulated area is achieved.
文摘Sets of cold-filled SMA-13 asphalt mixture were designed by means of orthogonal design method. The bending and low temperature creep tests of the cold-filled SMA-13 asphalt mixture were carried out. The related models of the fractal dimension and the road performance evaluation index including low temperature bending failure strain εB and bending strength RB are established by using fractal theory. The model can be used to predict the low temperature performance of cold-filled SMA-13 asphalt mixture according to the design gradation, which can reduce the test workload and improve the working efficiency, so as to provide the reference for engineering design.
文摘The National University Corporation Tsukuba University of Technology（NTUT） is the only institute of higher education for the hearing and the visually impaired in Japan. In our university, hearing or visually impaired students are studying to be technicians after they graduate, toward social independence. From previous experience of higher education for students with disabilities, effects are increased when modeling is used by the teachers involved in professional education. In the Mechanical Engineering Course, we are using modeling, to match the drawing and shape for beginning students. It includes support for enhancing one＇s view, and how to draw out the ability of mechanical engineering students for the basics. For students to study Mechanical Design and Drawing, Modeling of Gear Pump, Jack and Globe Valve are easily shown through drawings and the operation of each mechanism through sample drawings in the textbook. It is possible to make an opportunity to think about the machine mechanism. It will be shown by students＇ works. The assembling of the model triggers the need for form accuracy by making a function, and improves the quality of learning. It is possible that a three-dimensional molding machine can be produced through experiential learning by the model, and modeling with the dimension numerical data. Moreover, it is also embodied in a three-dimensional modeling which results in the image processing programming created. Confirming the improvement of the program through the shape with the quality. In the Department of Synthetic Design, students have chances to realize and self-evaluate from the design of the lamp shade with a complicated shape. In the Faculty of Health Science from Department of Health, high quality teaching of visually-impaired students through the use of bone model teaching materials has become possible in the medical-related courses.
