Fast-scale border collision bifurcation in SEPIC power factor pre-regulators

In this paper we report a kind of fast-scale instability occurring in the single-ended primary inductance converter （SEPIC） power factor pre-regulator, which is designed to operate in discontinuous conduction mode. Main results are given by exact cycle-by-cycle computer simulations as well as theoretical analysis. It is found that the instability phenomenon manifests itself as a fast-scale bifurcation at the switching period, which implies the occurrence of border collision bifurcation, or is related to the transition of the regular operating mode of the SEPIC. According to the theoretical analysis and simulation results, the effects of parameters on system stability, and the locations of the bifurcation points are confirmed. Moreover, the effects of such an instability on power factor and switching stress are also discussed. Finally, the occurrence of the asymmetric bifurcation locations is investigated. The results show that this work provides a convenient means of predicting stability boundaries which can facilitate the selection of the practical parameters.

Analysis and Design Aspects of a Series Power Semiconductor Array with Digital Waveform Control Capability for Single Phase AC Voltage Regulators and Other Applications

A series connected power semiconductor array, with digital control capability could be used for developing single phase AC regulators or other applications such as AC electronic loads. This technique together with an ordinary gapless transformer could be used to develop a low cost AC voltage regulator (AVR) to provide better or comparable specifications with bulky ferro-resonant AVR types. One primary advantage of the technique is that digital control can be used to minimize harmonics. Commencing with a review of AC voltage regulator techniques for single phase power conditioning systems, an analysis and design aspects of this technique is presented with experimental results for AVRs. Guidelines on how to utilize the technique in a generalized basis is also summarized together with a summary of a technique for achieving harmonic control.

HIL Simulation of a Mixed Islanded Power Network with External DSP Regulator

The present paper deals with the development of a modular, flexible and structured block to block approach for the study of regulators by implementing the different blocks on a DSP （digital signal processor）. The proposed low-cost approach has been applied and validated by the implementation of an industrial regulator in a real time hardware-in-the-loop simulation of a mixed islanded power network including precise models of the hydraulic system. The studied network is constituted of three different types of electrical power generation systems and a consumer.

Online frequency and power regulation scheme of magnetic coupled resonant wireless power transfer

In order to address the issues that the magnetic coupled resonant wireless power transfer （MCR-WPT） system is sensitive to the resonant frequency and that transmission power is difficult to control with the non-resistive load in the MCR-WPT, a single-side regulation scheme for frequency and transmission power online is proposed, which is based on the inherent constraint relationships the among system parameters in the primary side. Thus, the communication between the primary side and the secondary side is avoided. First, the transfer models of resistance-capacitance load and resistance- inductance load are established, respectively. Next, the relationship between the input voltage phasor and the input current phasor is used to recognize the load property and value. Then, the coaxial rotation of the stepper motor and the rotating vacuum variable capacitor is conducted to unify resonant frequency both in the primary side and the secondary side. Finally, the regulations of both frequency and amplitude of input voltage are made to guarantee transmission power under a new resonant frequency point the same as the one when the only pure resistance part of load is accessed under the former resonant frequency point. Both simulation and experimental results indicate that the proposed regulation scheme can track remnant frequency and maintain transmission power constant.

Design of DC regulated power supply based on single chip microcomputer

A DC regulated power supply with numerical control based on single chip microcomputer （SCM） is designed. SCM is the main controller and output voltage o{ DC power supply can be set by keyboard. The analog voltage can be obtained through D/A converter （DAC0832） so that different voltages can be provided by operational amplifier. The output voltage varies from 0 V to 12 V with the incremental value of 0. 1 V. The actual output voltage is shown in the nixietube. This DC regulated power supply is characterized by simple structure and easy operation.

Behavior an Induction Generator without and with a Voltage Regulator

During the isolated use of a wind system, the output voltage of the self-excited induction generator depends on the variation characteristic of its parameters: the excitation condensers, the drive speed and the load. Therefore, the regulation of the tension appears to be of great interest. We focused on the use of an analogical regulator of tension, with the aim of controlling the tension at the exit of the self-excited induction generator. So we modelled, implanted and simulated a wind system (Self-excited induction generator, converters (AC/DC, DC/DC) and load it) in the Orcad/Pspice environment. In the first time the behaviour of the asynchronous generator was analyzed when the load, the excitation capacitor and the drive speed vary in the absence of any form of regulation. This analysis was conducted with the aim of defining the limits of the machine exploitation. In the second time the functioning mode is controlled by an analogical control of tension. The results of simulation show the good performances of the system during the application of the proposed voltage regulator.

A comparative study of digital low dropout regulators

Granular power management in a power-efficient system on a chip(SoC)requires multiple integrated voltage regulators with a small area,process scalability,and low supply voltage.Conventional on-chip analog low-dropout regulators(ALDOs)can hardly meet these requirements,while digital LDOs(DLDOs)are good alternatives.However,the conventional DLDO,with synchronous control,has inherently slow transient response limited by the power-speed trade-off.Meanwhile,it has a poor power supply rejection(PSR),because the fully turned-on power switches in DLDO are vulnerable to power supply ripples.In this comparative study on DLDOs,first,we compare the pros and cons between ALDO and DLDO in general.Then,we summarize the recent DLDO advanced techniques for fast transient response and PSR enhancement.Finally,we discuss the design trends and possible directions of DLDO.

Regulating cost for renewable energy integration in power grids

To address the issue of climate change caused by the use of polluting, non-renewable energy sources, the use of renewable energy has gained momentum worldwide. Consequently, the increased integration of renewable energy sources into power grids has necessitated the inclusion of flexible capacities in the power systems to solve problems of intermittent and fluctuating characteristics associated with renewable generation outputs. In this work, we study the regulating cost of a power system with high renewable penetration using an improved time-series system production simulation analysis method. The operational cost of the system is considered as the objective function. Three different methods to increase regulating capacities, including using interconnection lines, building additional flexible power capacities, and retrofitting existing thermal power plants, are adopted and simulated to compare the costs of accommodating renewable energy in the system in these cases. Our results indicate that increasing the flexibility of thermal power plants and developing crossregional connection lines are cost-effective methods of increasing renewable energy consumption.

Review on Power System Frequency Regulation with High Wind Power Permeability

In recent years, global wind power has developed rapidly to alleviate environmental pollution and energy crisis. Due to the potential of enhancing the stability of power system through the application of wind power participating in power grid frequency regulation, the large-scale integration of wind power has become a hot issue for academic research in recent years. This paper classifies the frequency control problems of wind power integration and summarizes the research of power system frequency regulation strategy with high wind power permeability. Energy storage system participating in frequency regulation of the power system with high wind permeability is reviewed and analyzed.

Optimization of Minimum Power Output for Combined Heat and Power Units Considering Peak Load Regulation Ability

Northern China has rich wind power and photovoltaic renewable resources. Combined Heat and Power (CHP) Units to meet the load demand and limit its peaking capacity in winter, to a certain extent, it results in structural problems of wind-solar power and thermoelectric. To solve these problems, this paper proposes a plurality of units together to ensure supply of heat load on the premise, by building a thermoelectric power peaking considering thermal load unit group dynamic scheduling model, to achieve the potential of different thermoelectric properties peaking units of the excavation. Simulation examples show, if the unit group exists obvious relationship thermoelectric individual differences, the thermal load dynamic scheduling can be more significantly improved overall performance peaking unit group, effectively increase clean energy consumptive.

Flexible Power Regulation and Limitation of Voltage Source Inverters under Unbalanced Grid Faults

This paper develops a flexible power regulation and limitation strategy of voltage source inverters(VSIs)under unbalanced grid faults.When the classical power theory is used under unbalanced grid faults,the power oscillations and current distortions are inevitable.In the proposed strategy,the extended power theory is introduced to compute the power feedbacks together with the classical power theory.Based on the combination of the classical and extended power theory,the proposed strategy can achieve the sinusoidal current provision and the flexible regulation between three common targets,i.e.,constant active power,balanced current,and constant reactive power.Meanwhile,the proposed strategy is associated with a power limiter,which is capable to keep the currents under the pre-defined threshold and to compute the maximum apparent power for better utilization of the inverter capacity.With this power limiter,the rated inverter capacity is fully used for both the active and reactive power provisions under unbalanced grid faults.Using the proposed power regulation and limitation,the VSI can avoid overcurrent tripping and flexibly regulate its power under unbalanced grid faults.All the conclusions are verified by the real-time hardware-in-loop tests.

The Development of Network based Composite Power quality Regulation Device

First, the paper analyzes the advantages and disadvantages of all kinds of reactive power compensation technology, and then proposes a principle and integrated control strategy of the composite operation of TSC and SVG, also the paper designs and develops the main controller of Network based composite power quality regulation device, based on RTDS, the real-time digital simulation model of The Device is established, and finally the prototype of the device is developed with the function of filter and split-phase compensation. The main controller determines the cooperative operation of both TSC and SVG, and the switching strategy of TSC. The simulation result in RTDS can verify the precision of the measure system and the validity of the control logic, the prototype has finished the type test according to the national standard.

Novel Control Method for Dynamic Voltage Regulator

Control strategy affects directly the working performances of dynamic voltage regulator （DVR）. One-cycle control is an effective nonlinear signal modulation control method. In this paper, a new one-cycle control scheme for DVR was proposed in single phase supply system. On the basis of principle analysis, the corresponding one-cycle control model for DVR was built up, which is characterized by simple control circuits, good control performance, and high control precision. As an example, a control model for single-phase DVR was simulated by using Matlab/Simulink and SimPowerSystem. The results show that the load voltage could be compensated quickly at the points of supply voltage stepping down and up, and the relative error was less than 4% in the whole voltage sag process. Both theory analysis and simulation results show that the new one-cycle control scheme for DVR is effective.

Fault diagnosis algorithm for 3-phase passive rectifiers based on frequency-domain analysis for acceleration grid power supply in CFETR NBI system

The acceleration grid power supply(AGPS) is a crucial part of the Negative-ion Neutral Beam Injection system in the China Fusion Engineering Test Reactor,which includes a 3-phase passive(diode) rectifier.To diagnose and localize faults in the rectifier,this paper proposes a frequencydomain analysis-based fault diagnosis algorithm for the rectifier in AGPS.First,time-domain expressions and spectral characteristics of the output voltage of the TPTL-NPC inverter-based power supply are analyzed.Then,frequency-domain analysis-based fault diagnosis and frequency-domain analysis-based sub-fault diagnosis algorithms are proposed to diagnose open circuit(OC) faults of diode(s),which benefit from the analysis of harmonics magnitude and phase-angle of the output voltage.Only a fundamental period is needed to diagnose and localize exact faults,and a strong Variable-duration Fault Detection Method is proposed to identify acceptable ripple from OC faults.Detailed simulations and experimental results demonstrate the effectiveness,quickness,and robustness of the proposed algorithms,and the diagnosis algorithms proposed in this article provide a significant method for the fault diagnosis of other rectifiers and converters.

Stochastic Differential Game Model for Decentralized Power Control with Wisdom Regulation Factor in Wearable Audio-Oriented BodyNets

In this study, aiming at the characteristics of randomness and dynamics in Wearable Audiooriented BodyNets （WA-BodyNets）, stochastic differential game theory is applied to the investigation of the problem of transmitted power control inconsumer electronic devices. First, astochastic differential game model is proposed for non-cooperative decentralized uplink power control with a wisdom regulation factor over WA-BodyNets with a onehop star topology.This model aims to minimize the cost associated with the novel payoff function of a player, for which two cost functions are defined： functions of inherent power radiation and accumulated power radiation darmge. Second, the feedback Nash equilibrium solution of the proposed model and the constraint of the Quality of Service （QoS） requirement of the player based on the SIR threshold are derived by solving the Fleming-Bellman-Isaacs partial differential equations. Furthermore, the Markov property of the optimal feedback strategies in this model is verified.The simulation results show that the proposed game model is effective and feasible for controlling the transmitted power of WA-BodyNets.

The research of power saving frequency conversion speed regulation experiment system

A power saving frequency difference controlling method was introduced by the double inverter and motor experiment system.The characters of the system under differ- ent loads were investigated.The theoretical analysis and experiment results show the frequency difference method is a ideal power saving speed regulation method for the dou- ble inverter and motor system.The experiment system is simply structured,convenient to operate and provides a new way of character testing for frequency conversion speed regulation.

Research on the Prediction of Load Regulation Capacity for Supercritical Thermal Power Unit

Both the modeling and the load regulation capacity prediction of a supercritical power plant are investigated in this paper. Firstly, an indirect identification method based on subspace identification method is proposed. The obtained identification model is verified by the actual operation data and the dynamic characteristics of the system are well reproduced. Secondly, the model is used to predict the load regulation capacity of thermal power unit. The power, main steam pressure, main steam temperature and other parameters are simulated respectively when the unit load is going up and down. Under the actual constraints, the load regulation capacity of thermal power unit can be predicted quickly.

Programmable Voltage Regulating Method for 15 kV High Voltage DC Power Supply

In order to solve the disadvantages caused by mechanical slide rheostat that has big errors and low precision,a novel voltage regulation method for high voltage DC power supply was introduced.The key of this method were digital potentiometer MAXIM 5455 and linear photoelectric coupling LOC110,and application programs were compiled using Visual Basic which was graphical compiling language,furthermore the communication between exterior and computer was carried out by ICP7044D module,in consequence the output value of high voltage DC power supply could be regulated with computer.The measured results showed that this method could accurately,conveniently and rapidly regulate the output value of high voltage DC power supply.

The Role of Nuclear Regulators in Reviewing Population Growth Projections

One of the roles of nuctear regulators is to review population projections calculated by applicants for populations lying in the vicinity of nuclear power plants. This paper examines methods of calculating rates of growth and thus calculating future population growth. This paper is concerned about regulators making sure that nuclear power plants are not located near densely populated centers and that population centers located near nuclear power plants do not become densely populated. In the case of El Dabaa city in the north coast of Egypt, south west of the nominated plant site, three rates of growth 1.5%, 2.5% and 3% were identified. The first is the current population growth rate of the city, the second is the average national growth rate and the third is the expected growth rate of the city when the nuclear power plant gets constructed and operated. In all three cases, this city is a population center and rules of distance from the nuclear power plant shall apply. Thus the further natural growth of this city should be controlled and directed away from the downwind of the plant.

Wind Power Related Policies and Regulations in China--Status, Problems and Solutions

This article identifies urgent problems regarding to China＇s wind power development from the perspective of wind power planning, construction and operation. China＇s wind power has been experiencing rapid growth since the enactment of Renewable Energy Law in 2006, but there are also some problems with respect to the coordinated development of wind power and power grids. By learning experience from United States, Germany, Spain and Denmark, some suggestions are systematically put forward for the improvement of wind power related policies and regulations. By taking a neutral position and taking into account interests of all stakeholders, this article has proposed overall, comprehensive and system-wide political and regulatory solutions to the current problems in wind power development. Firstly, unified planning should be implemented. Secondly, administrative procedures and approval process for grid projects should be streamlined and simplified. Thirdly, Mechanism for ancillary service should be set up to motivate conventional units to operate in a more flexible way. Fourthly, peak/valley or even negative feed-in tariff should be introduced stepwise. Fifthly, pilot projects of heating with wind power should be accelerated.