Cosmological Model in Four Time and Four Space Dimensions

We develop a cosmological model in a physical background scenario of four time and four space dimensions ((4+4)-dimensions or (4+4)-universe). We show that in this framework the (1+3)-universe is deeply connected with the (3+1)-universe. We argue that this means that in the (4+4)-universe there exists a duality relation between the (1+3)-universe and the (3+1)-universe.

Fractal analysis of major faults and fractal dimension of lineaments in the Indo-Gangetic Plain on a regional scale

The Indo-Gangetic Plain(IGP)is one of the most seismically vulnerable areas due to its proximity to the Himalayas.Geographic information system(GIS)-based seismic characterization of the IGP was performed based on the degree of deformation and fractal dimension.The zone between the Main Boundary Thrust(MBT)and the Main Central Thrust(MCT)in the Himalayan Mountain Range(HMR)experienced large variations in earthquake magnitude,which were identified by Number-Size(NS)fractal modeling.The central IGP zone experienced only moderate to low mainshock levels.Fractal analysis of earthquake epicenters reveals a large scattering of earthquake epicenters in the HMR and central IGP zones.Similarly,the fault fractal analysis identifies the HMR,central IGP,and south-western IGP zones as having more faults.Overall,the seismicity of the study region is strong in the central IGP,south-western IGP,and HMR zones,moderate in the western and southern IGP,and low in the northern,eastern,and south-eastern IGP zones.

Prediction of Weld Joint Shape and Dimensions in Laser Welding Using a 3D Modeling and Experimental Validation

This paper presents an experimentally validated weld joint shape and dimensions predictive 3D modeling for low carbon galvanized steel in butt-joint configurations. The proposed modelling approach is based on metallurgical transformations using temperature dependent material properties and the enthalpy method. Conduction and keyhole modes welding are investigated using surface and volumetric heat sources, respectively. Transition between the heat sources is carried out according to the power density and interaction time. Simulations are carried out using 3D finite element model on commercial software. The simulation results of the weld shape and dimensions are validated using a structured experimental investigation based on Taguchi method. Experimental validation conducted on a 3 kW Nd: YAG laser source reveals that the modelling approach can provide not only a consistent and accurate prediction of the weld characteristics under variable welding parameters and conditions but also a comprehensive and quantitative analysis of process parameters effects. The results show great concordance between predicted and measured values for the weld joint shape and dimensions.

NUMERICAL MODELLING OF THREE-DIMENSION CHARACTERISTICS OF WIND-DRIVEN CURRENT IN THE BOHAI SEA

Three- dimension (3-D) wind-driven currents in the Bohai Sea in both winter and summer are calculated by using a 3- D barotropic steady model, and the results are consistent with observed flow char -acteristics. Based on the results, 3- D characteristics of flow, currents at different depths, compensated flow in the lower layer , long and narrow alongshore current, the area of upwelling and downwelling, main circulation in vertical profile, and the current in Bohai Strait are discussed.

Three-Dimensional Tidal Model and Its Application to Numerical Simulation of Water Quality in Coastal Waters

The turbulence mechanism plays an important part in the mixing process and momentum transfer of turbulence. A three-dimensional Prandtl mixing length tidal model has been developed to simulate tidal flows and water quality. The eddy viscosities and diffusivities are computed from the Prandtl mixing length model. In order to model the water quality of an estuary or coastal area many interdependent processes need to be simulated. These may be conveniently separated into three main groups: transport and mixing processes, biochemical interaction of water quality variables and the utilization and re-cycling of nutrients by living matter. The model simulates full oxygen and nutrient balance, primary productivity and the transport, reaction mechanism and fate of pollutants over tidal time-scales. The model is applied to numerical simulation of tidal flows and water quality in Dalian Bay. The model has been calibrated against a limited data set of historical water quality observations and in general demonstrates excellent agreement with all available data.

A THREE-DIMENSIONAL COASTAL BAROTROPIC MODEL IN GENERALIZED CURVILINEAR GRIDS

The method of automatically generating generalized curvilinear meshes has many advantages and is beginning to be used in ocean simulations. This three dimensional (3 D) coastal barotropic model in generalized curvilinear grids was developed to simulate the M 2, S 2, K 1 and O 1 tidal waves in the Bohai Sea, China. The numerical results agreeing with observations showed that the method is an effective tool for improving accuracy of simulations in shallow shelf seas, especially in the near coast region, if the pseudo effect there usually caused by rectangular grids can be removed.

The three-dimension model for the rock-breaking mechanism of disc cutter andanalysis of rock-breaking forces

To study the rock deformation with three- dimensional model under rolling forces of disc cutter, by car- rying out the circular-grooving test with disc cutter rolling around on the rock, the rock mechanical behavior under rolling disc cutter is studied, the mechanical model of disc cutter rolling around the groove is established, and the the- ory of single-point and double-angle variables is proposed. Based on this theory, the physics equations and geometric equations of rock mechanical behavior under disc cutters of tunnel boring machine （TBM） are studied, and then the bal- ance equations of interactive forces between disc cutter and rock are established. Accordingly, formulas about normal force, rolling force and side force of a disc cutter are de- rived, and their validity is studied by tests. Therefore, a new method and theory is proposed to study rock- breaking mech- anism of disc cutters.

Critical Finite Size Scaling Relation of the Order-Parameter Probability Distribution for the Three-Dimensional Ising Model on the Creutz Cellular Automaton

我们在周期的边界条件下面在简单立方的格子上为三维的 spin-1/2 和 spin-1 Ising 模型在批评的点学习顺序参数概率分发。为顺序参数概率分发放大关系的有限尺寸被微正规 Creutz 细胞的自动机模拟数字地测试并且验证。州的批评代表三角洲，描绘可伸缩的顺序参数概率分发的远尾巴政体，在批评温度用细胞的自动机模拟为三维的 Ising 模型被估计。结果在对蒙特卡罗计算的好同意。

A multidimensional review of the cash management problem

In this paper,we summarize and analyze the relevant research on the cash manage-ment problem appearing in the literature.First,we identify the main dimensions of the cash management problem.Next,we review the most relevant contributions in this field and present a multidimensional analysis of these contributions,according to the dimensions of the problem.From this analysis,several open research questions are highlighted.

Model-based Predictive Control for Spatially-distributed Systems Using Dimensional Reduction Models

In this paper, a low-dimensional multiple-input and multiple-output （MIMO） model predictive control （MPC） configuration is presented for partial differential equation （PDE） unknown spatially-distributed systems （SDSs）. First, the dimension reduction with principal component analysis （PCA） is used to transform the high-dimensional spatio-temporal data into a low-dimensional time domain. The MPC strategy is proposed based on the online correction low-dimensional models, where the state of the system at a previous time is used to correct the output of low-dimensional models. Sufficient conditions for closed-loop stability are presented and proven. Simulations demonstrate the accuracy and efficiency of the proposed methodologies.

A Research on Fractal Dimension and Nonlinear Dynamic Model of Xintan Landslide，China

The dynamic research of landslide is one of the key Points in landslidology. In the paper,from the view point of nonlinear dynamic theory. some features of Xintan landslide, such as the distribution regularities of spatial and temporal fractal dimensions and their corresponding relationships to landslide occurring are researched. The accumulative principles of fractal dimension reduction is exploratively pointed out. The nonlinear dynamic equation of the landslide is built by analyzing the relationship between the correlation dimension and the phase space. Finally, the forecasted results and error analysis are listed. The research results are satisfactory.

ANN Based Predictive Modelling of Weld Shape and Dimensions in Laser Welding of Galvanized Steel in Butt Joint Configurations

The quality assessment and prediction becomes one of the most critical requirements for improving reliability, efficiency and safety of laser welding. Accurate and efficient model to perform non-destructive quality estimation is an essential part of this assessment. This paper presents a structured and comprehensive approach developed to design an effective artificial neural network based model for weld bead geometry prediction and control in laser welding of galvanized steel in butt joint configurations. The proposed approach examines laser welding parameters and conditions known to have an influence on geometric characteristics of the welds and builds a weld quality prediction model step by step. The modelling procedure begins by examining, through structured experimental investigations and exhaustive 3D modelling and simulation efforts, the direct and the interaction effects of laser welding parameters such as laser power, welding speed, fibre diameter and gap, on the weld bead geometry (i.e. depth of penetration and bead width). Using these results and various statistical tools, various neural network based prediction models are developed and evaluated. The results demonstrate that the proposed approach can effectively lead to a consistent model able to accurately and reliably provide an appropriate prediction of weld bead geometry under variable welding conditions.

DIMENSION VARIATION OF FEATURE-BASED MODEL BY OPERATING DIRECTLY ON B-REP

A new algorithm for dimension variation of feature based models is developed. The algorithm is based on B Rep/CSG hybrid scheme and operates directly on B Rep. Product information (including the features locating dimensions and other data for manufac

Structural Dimensions Analysis of Service Employees' Innovation Behavior Based on Structural Equation Model

In order to know about the essence of service employees' innovation behavior, the service employees' innovation behavior scale based on their unique characteristics is designed. Data were collected from high-star hospitalities. Through the issuance and the collection of questionnaires, the scale is verified to have good reliability and validity by SPSS software analysis. Meanwhile,the structural equation model( SEM) is suited for testing structural dimensions of service employees' innovation behavior. The results showed that service employees' innovation behavior could be decomposed into a four-dimensional structure,namely innovation orientation, ideas generation, innovation implementation and innovation practice. In addition,there are significant differences in service employees' innovation behavior about subjects' gender,position,education background and years of working.

Soft measurement model of ring's dimensions for vertical hot ring rolling process using neural networks optimized by genetic algorithm

Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.

Prediction of Radioactive Half-Lives and Atomic Nucleus Dimensions in a Concentric Shell Model or Flocon Model

Considering only the wave aspect, we determine the energy of a bond between 2 nucleons;this quantified energy is associated with a standing wave. Then, starting from the mass loss corresponding to this energy, we determine the number of bonds in this nucleus. The mass defect value for a link is used to determine a specific length at that link. Fixing a precise distance between nucleons makes it possible to determine a geometry of the nucleus and its dimensions. It makes it possible to understand when this bond is stronger than the electrostatic force and allows deducing a shell model built in a precise order. The calculation on the mass defect will also make it possible to determine that one or more nucleons concerned by the radioactivity will be bound by a single bond to the rest of the nucleus or, on the contrary, bound by several bonds which induce short 1/2 lives or, on the contrary, very long. The analysis of the bonds on H, He and C make it possible to write formulae which are then applied to the nuclei to find the radioactive 1/2 lives. To find by equations the radioactive 1/2 lives does not call into question the standard model since it concerns only the defect of mass of the nuclei with energies that are not used to find the main particles of the standard model. This model, which favours a geometric approach to the detriment of a mathematical approach based on differential equations, can lead to theoretical questions about the possibility of interpreting the structure of the nucleus in a more undulatory way. It is possible to explain radioactivity in a more deterministic way.

行为建模技术(Behavioral Modeling)在零件设计中的应用

为更好地把握设计意图,在Pro/ENGINEER软件中需要人工创建各种"关系",这种"关系"只能向前引用"尺寸参数",如果需要向后引用"尺寸参数"则要应用行为建模技术。行为建模技术通过建立"分析特征"实现优化目标的建立,以尺寸参数或用户自定义参数为变量对优化目标进行优化。本文通过一个轮胎模型,例证了上述方法的应用过程,得出了优化结果。

Homological dimensions of gentle algebras via geometric models

Let A=kQ/I be a finite-dimensional basic algebra over an algebraically closed field k,which is a gentle algebra with the marked ribbon surface(SA,MA,ΓA).It is known that SAcan be divided into some elementary polygons{Δi|1≤i≤d}byΓA,which has exactly one side in the boundary of SA.Let■(Δi)be the number of sides ofΔibelonging toΓAif the unmarked boundary component of SAis not a side ofΔi;otherwise,■(Δi)=∞,and let f-Δbe the set of all the non-co-elementary polygons and FA(resp.f-FA)be the set of all the forbidden threads(resp.of finite length).Then we have(1)the global dimension of A is max1≤i≤d■(Δi)-1=maxΠ∈FAl(Π),where l(Π)is the length ofΠ;(2)the left and right self-injective dimensions of A are 0,if Q is either a point or an oriented cycle with full relations.masΔi∈f-Δ{1,■(Δi)-1}=max n∈f-F_(A)l(П),otherwise,As a consequence,we get that the finiteness of the global dimension of gentle algebras is invariant under AvellaGeiss(AG)-equivalence.In addition,we get that the number of indecomposable non-projective Gorenstein projective modules over gentle algebras is also invariant under AG-equivalence.