Three-Dimensional TIN Algorithm for Digital Terrain Modeling

The problem of taking an unorganized point cloud in 3D space and fitting a polyhedral surface to those points is both important and difficult. Aiming at increasing applications of full three dimensional digital terrain surface modeling, a new algorithm for the automatic generation of three dimensional triangulated irregular network from a point cloud is pro- posed. Based on the local topological consistency test, a combined algorithm of constrained 3D Delaunay triangulation and region-growing is extended to ensure topologically correct reconstruction. This paper also introduced an efficient neighbor- ing triangle location method by making full use of the surface normal information. Experimental results prove that this algo- rithm can efficiently obtain the most reasonable reconstructed mesh surface with arbitrary topology, wherein the automati- cally reconstructed surface has only small topological difference from the true surface. This algorithm has potential applica- tions to virtual environments, computer vision, and so on.

Three-dimensional numerical modeling of gravity anomalies based on Poisson equation in spacewavenumber mixed domain

In gravity-anomaly-based prospecting, the computational and memory requirements for practical numerical modeling are potentially enormous. Achieving an efficient and precise inversion for gravity anomaly imaging over large-scale and complex terrain requires additional methods. To this end, we have proposed a new topography-capable By performing a two-dimensional Fourier transform in the horizontal directions, threedimensional partial differential equations in the spatial domain were transformed into a group of independent, one-dimensional differential equations engaged with different wave numbers. These independent differential equations are highly parallel across different wave numbers. differential equations with different wave numbers, and the efficiency of solving fixedbandwidth linear equations was further improved by a chasing method. In a synthetic test, a prism model was used to verify the accuracy and reliability of the proposed algorithm by comparing the numerical solution with the analytical solution. We studied the computational precision and efficiency with and without topography using different Fourier transform methods. The results showed that the Guass-FFT method has higher numerical precision, while the standard FFT method is superior, in terms of computation time, for inversion and quantitative interpretation under complicated terrain.

A three-dimensional semi-implicit unstructured grid finite volume ocean model

A new three-dimensional semi-implicit finite-volume ocean model has been developed for simulating the coastal ocean circulation, which is based on the staggered C-unstructured non-orthogonal grid in the hor- izontal direction and z-level grid in the vertical direction. The three-dimensional model is discretized by the semi-implicit finite-volume method, in that the free-surface and the vertical diffusion are semi-implicit, thereby removing stability limitations associated with the surface gravity wave and vertical diffusion terms. The remaining terms in the momentum equations are discretized explicitly by an integral method. The partial cell method is used for resolving topography, which enables the model to better represent irregular topography. The model has been tested against analytical cases for wind and tidal oscillation circulation, and is applied to simulating the tidal flow in the Bohal Sea. The results are in good agreement both with the analytical solutions and measurement results.

A Novel Three-Dimensional Mouse Embryonic Implantation Model In Vitro

To regenerate three-dimensional endometrium in vitro as a novel model for studying the mechanism of implantation of embryos, the luminal epithelial cells and stromal cells of the rabbit uterus were separated and cultured in vitro. The type Ⅰ mouse tail collagen was used as scaffolding material. The stromal cells were inoculated in the type I mouse tail collagen, and the luminal epithelial cells were inoculated on the type i mouse tall collagen to regenerate the endometrium in vitro. The regenerated endometrium was cultured in DMEM-F/12 media containing 100 nmol L^-1 progesterone, 10 nM β-estradiol, and 10% fetal bovine serum （FBS） for 3 d. The media were then replaced with CZB containing 100 nM progesterone, 10 nmol L-1 β-estradiol, and 10% FBS, and the mouse blastulas were co-cultured with it. The results of scanning electronic micrography showed that the epithelial cells on the surface of the reconstructed endometrium were covered with numerous slender microvilli and some epithelial cells protruded pinopodes. After culturing for 12 h with the mouse blastula, the shedding, attachment, and implantation of the blastula were observed. The blastula can escape from zona pellucida and attach to the three-dimensional endometrium and is then implanted into it. This study showed that the reconstructed three-dimensional endometrium can serve as a robust embryo implantation model in vitro.

Three-dimensional cell culture systems as an in vitro platform for cancer and stem cell modeling

Three-dimensional(3D)culture systems are becoming increasingly popular due to their ability to mimic tissue-like structures more effectively than the monolayer cultures.In cancer and stem cell research,the natural cell characteristics and architectures are closely mimicked by the 3D cell models.Thus,the 3D cell cultures are promising and suitable systems for various proposes,ranging from disease modeling to drug target identification as well as potential therapeutic substances that may transform our lives.This review provides a comprehensive compendium of recent advancements in culturing cells,in particular cancer and stem cells,using 3D culture techniques.The major approaches highlighted here include cell spheroids,hydrogel embedding,bioreactors,scaffolds,and bioprinting.In addition,the progress of employing 3D cell culture systems as a platform for cancer and stem cell research was addressed,and the prominent studies of 3D cell culture systems were discussed.

The study on three-dimensional numerical model and fronts of the Jiulong Estuary and the Xiamen Bay

Applying the methods of on-site observation and dynamic model, the research on the fronts at the Jiulong Estuary has been carried out, during which spatial and temporal distribution, dynamic characteristics and formation mechanism of salinity fronts are analyzed and discussed. The research shows that the estuarine fronts mainly lie in the area from the Jiyu Islet to the Haimen Island, outside of Yuweizai to Hulishan cross-section, the near coast of Yuweizai and the south of the Songyu-Gulangyu Channel. The fronts in the former two regions are formed directly by plume, while the one near the coast of Yuweizai is a tidal intrusion front caused by flood current and the one at the south of the Songyu-Gulangyu Channel is the result of current shear transformation. Under normal circumstances, fresh water of the Jiulong River mainly influences the inside of the Xiamen Bay, and when it is in typhoon seasons, plume front can affect the Taiwan Strait and has an effect on the biogeochemical Drocesses in the strait.

A DESIGN OF THREE-DIMENSIONAL SPATIAL DATA MODEL AND ITS DATA STRUCTURE IN GEOLOGICAL EXPLORATION ENGINEERING

The key to develop 3-D GISs is the study on 3-D data model and data structure. Some of the data models and data structures have been presented by scholars. Because of the complexity of 3-D spatial phenomenon, there are no perfect data structures that can describe all spatial entities. Every data structure has its own advantages and disadvantages. It is difficult to design a single data structure to meet different needs. The important subject in the3-D data models is developing a data model that has integrated vector and raster data structures. A special 3-D spatial data model based on distributing features of spatial entities should be designed. We took the geological exploration engineering as the research background and designed an integrated data model whose data structures integrats vector and raster data byadopting object-oriented technique. Research achievements are presented in this paper.

Three-dimensional fuzzy logic system for process modeling and control

The traditional fuzzy logic system （FLS） can only model and control the process in two-dimensional nature. Many of real-world systems are of multidimensional features, such as, thermal and fluid processes with spatiotemporal dynamics, biological systems, or decision-making processes that contain stochastic and imprecise uncertainties. These types of systems are difficult for the traditional FLS to model and control because they require a third dimension for spatial or probabilistic information. The type-2 fuzzy set provides the possibility to develop a three-dimensional fuzzy logic system for modeling and controlling these processes in three-dimensional nature.

A Three-Dimensional Water Quality Model and Its Application to Jiaozhou Bay, China

A three-dimensional coupled physical and water quality model was developed and applied to the Jiaozhou Bay to study water quality involving nutrients, biochemical oxygen demand, dissolved oxygen, and phytoplankton that are closely related to eutrophication process. The physical model is a modified ECOM-si version with inclusion of flooding/draining processes over the intertidal zone. The water quality model is based on WASP5 which quantifies processes governing internal nutrients cycling, dissolved oxygen balance and phytoplankton growth. The model was used to simulate the spatial distribution and the temporal variation of water quality in the Jiaozhou Bay for the period of May 2005 to May 2006. In addition, the effect of reduction of riverine nutrients load was simulated and evaluated. The simulated results show that under the influence of nutrients discharged from river, the concentrations of nutrients and phytoplankton were higher in the northwest and northeast of the bay, and decreased from the inner bay to the outer. Affected by strong tidal mixing, the concentrations of all state variables were vertically homogeneous except in the deeper regions where a small gradient was found. Obvious seasonal variation of phytoplankton biomass was found, which exhibited two peaks in March and July, respectively. The variation of riverine waste loads had remarkable impact on nutrients concentration in coastal areas, but slightly altered the distribution in the center of the bay.

A three-dimensional model for the transportation of Fe and Mn in Arha Reservoir

Coupling with a three dimensional (3D) hydrodynamic model and a suspended solids model, a 3D model for the transport of Fe and Mn in Arha Reservoir, China, was developed. The 3D velocity fields for the flood season are computed to drive the 3D model of Fe and Mn in which the processes of advection, diffusion, redox, sorption, desorption, deposition, and re suspension are included. The model has been calibrated by matching observed fluid, suspended solids, and total concentrations of Fe and Mn in the water column and in the sediment, successively. The model simulated both horizontal and vertical gradients of Fe and Mn in Arha Reservoir. It was found that Fe and especially Mn stratify in accordance with the stratification of DO during summer. The redox cycles across the water sediment interface has a principal role in the rise of Fe and Mn concentrations in the overlying water. It was also found that Fe and Mn loadings from the tributaries have a carryover effect on the water quality through a secondary contamination in the reservoir.

A combined numerical model of three-dimensional tidal motion and sediment transport in tidal current and its application

A calculation scheme, which combines a horizontal upwind finite element method with vertical implicit differences, is used to establish a three-dimensional mathematical model of tidal motion and sediment transport in tidal current. Compared with those of the relative theoretical formula, the results are satisfactory. The model mentioned above has been applied to the water area of the Lianzhou Bay, Guangxi Province. On the basis of the analysis and comparison with the field data, it shows clearly that the model calculation results are reasonable.

Construction and Analysis of Three-dimensional Graphic Model of Single-chain Fv Derived from an Anti-human Placental Acidic Isoferritin Monoclonal Antibody by Computer

Summary: A three-dimensional (3D) graphic model of a single-chain Fv (scFv) which was derived from an anti-human placental acidic isoferritin (PAF) monoclonal antibody (MAb) was construct- ed by a homologous protein-predicting computer algorithm on Silicon graphic computer station. The structure, surface static electricity and hydrophobicity of scFv were investigated. Computer graphic modelling indicated that all regions of scFv including the linker, variable regions of the heavy (VH) and light (VL) chains were suitable. The VH region and the VL region were involved in composing the 'hydrophobic pocket'. The linker was drifted away VH and VL regions. The complementarity determining regions (CDRs) of VH and VL regions surrounded the 'hydrophobic pocket'. This study provides a theory basis for improving antibody affinity, investigating antibody structure and analyzing the functions of VH and VL regions in antibody activity.

Development of a Percentile Based Three-dimensional Model of the Buttocks in Computer System

There are diverse products related to human buttocks, which need to be designed, manufactured and evaluated with 3D buttock model. The 3D buttock model used in present research field is just simple approximate model similar to human buttocks. The 3D buttock percentile model is highly desired in the ergonomics design and evaluation for these products. So far, there is no research on the percentile sizing system of human 3D buttock model. So the purpose of this paper is to develop a new method for building three-dimensional buttock percentile model in computer system. After scanning the 3D shape of buttocks, the cloud data of 3D points is imported into the reverse engineering software（Geomagic） for the reconstructing of the buttock surface model. Five characteristic dimensions of the buttock are measured through mark-points after models being imported into engineering software CATIA. A series of space points are obtained by the intersecting of the cutting slices and 3D buttock surface model, and then are ordered based on the sequence number of the horizontal and vertical slices. The 1st, 5th, 50 th, 95 th, 99 th percentile values of the five dimensions and the spatial coordinate values of the space points are obtained, and used to reconstruct percentile buttock models. This research proposes a establishing method of percentile sizing system of buttock 3D model based on the percentile values of the ischial tuberosities diameter, the distances from margin to ischial tuberosity and the space coordinates value of coordinate points, for establishing the Nth percentile 3D buttock model and every special buttock types model. The proposed method also serves as a useful guidance for the other 3D percentile models establishment for other part in human body with characteristic points.

Risk Assessment of Coal Mine Water Hazard Based on Three-Dimensional Model of Geology and Underground Space

Mine safety have top-five disasters,which including the water,gas,fire,dust and geological dynamic disaster.The coal mine water disaster is one of the important factors which restricted the development of China’s coal production.It is showed by statistics that 60%of mine accidents are affected by groundwater,which not only result in the production losses,casualties and a variety of

THREE-DIMENSIONAL MATHEMATICAL MODEL AND ITS APPLICATION IN THE NEIGHBORHOOD OF THE THREE GORGES RESERVOIR DAM IN THE YANGTZE RIVER

The calculation of flow and sediment transport is one of the most important tasks in river engineering. The task is particularly difficult because a number of complex physical phenomena should be accounted for more realistically in a model with a predictive power. Three-dimensional calculations of river flow and suspended sediment transport are performed in this paper with application in the Three Gorges Reservoir in the Yangtze River. A period of 76 years after the dam is built is simulated and the results are compared with laboratory measurements obtained by Tsinghua University whereby the model is verified and calibrated. Generally speaking, the calculated results agree well with the experiments, demonstrating that the present model can be used for flow and sediment transport prediction in rivers.

Three-Dimensional Model Test for Port Engineering with Multi-Directional Waves

-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.

Three-dimensional tidal current numerical model of the Oujiang Estuary

The characteristics of three-dimensional （3-D） tidal current in the Oujiang Estuary are investigated according to in situ observations. The Oujiang Estuary has features of irregular coastline, complex topography, many islands, moveable boundary, and submerged dyke, therefore, σ 3-D numerical model oil an unstructured triangular grid has been degeloped. The σ coordinate transforination, the moveable boundary and submerged dyke treatment techniques were employed in the model so it is suitable for the tidal simulations in the Oujing Estuary with submerged dyke and moveable boundary problems. The model is evaluated with the in situ data, and the results show that the calculated water elevations at 19 stations and currents at 19 profiler stations are in good agreement with measured data both in magnitude and phase. This numerical model is applied to the 3-D tidal circulation simulations of experiments in stopping flow transport through the South Branch of the Oujiang Estuary, and the feasibility to cutoff the flow in the South Branch of the Oujiang Estuary is demonstrated by numerical simulation experiments. The developed numerical model simulated the 3-D tidal current circulations in complicated coastal and estuarine waters very well.

Simulation-Based Construction of Three-Dimensional Process Model for Punching Cartridge Cases

A method of constructing three-dimensional process model for the punching cartridge cases is presented based on DEFORM simulation analysis. Using DEFORM software,the finite element simulation models for the punching and forming process of cartridge cases are established,and the corresponding simulation result model of each intermediate procedure is obtained by continuously performing the forming process simulation. The simulation model cannot annotate size and process information due to poor interface between DEFORM software and CAD software. Thus,a 3D annotation module is developed with secondary development technology of UG NX software. Consequently,the final process model with dimension and process information is obtained. Then,with the current 3D process management system,the 3D punching and forming process design of cartridge cases can be completed further. An example is also provided to illustrate that the relative error between the simulation process model and the physical model is less than 2%,which proves the validity and reliability of the proposed method in this study.

Numerical Simulation of Saline Intrusion and Purging in Long SeaOutfalls with Three-Dimensional Model

Saline intrusion into marine sewage ouffalls will greatly decrease the efficiency of sewage disposal. In order to investigate the mechanisms of this flow, in this paper, a three-dimensional numerical model based on FVM （Finite Volume Method） is established, The RNG κ-ε model is selected for turbulence modeling. The time-averaged vohtme fraction equations are introduced to simulate the stratification and inteffaeial exchange of sewage and seawater in outfalls. Validity of the established three-dimensional numerical model is evaluated by comparisons of numerical results with experimental data. With this three-dimensional numerical model, the internal flow characteristics in ouffalls for different sewage discharges are simulated. The results indicate that for a low sewage discharge, saline circulates in the outfall due to intrusion and both the inflowing momentum and the inteffaeial turbulent mixing are important mechanisms to extrude the saline. For a high sewage discharge, saline intrusion could be avoided. The inflow momentum is the main mechanism to extrude the saline and the inteffacial turbulent mixing is nut important relatively. Even at a high sewage discharge, the saline wedge would be retained in the main ouffall pipe after the risers are purged. It takes a long time for this saline wedge to be extruded by interracial turbulent mixing.

Application of Three-Dimensional Simulation Model of Bioactive Ceramic Degrading Process in vivo

This paper describes the method of constructing three dimensional model of bioactive ceramic to simulate the degrading process in vivo. Based on the construction of three dimensional simulation model and realizing it by computer programming, it proves that the three dimensional stimulant model can correctly represent the real degrading process, and thus verifies its feasibility.