Application of Digital Technology in Road and Bridge Design

With the development and progress of science and technology,road and bridge design has experienced rapid development,from the initial manual drawing design to the popularity of Computer-Aided Design(CAD),and then to today’s digital software design era.Early designers relied on hand-drawn paper design forms which was time-consuming and error-prone.Digital support for road and bridge design not only saves the design time but the design quality has also achieved a qualitative leap.This paper engages in the application of digital technology in road and bridge design,to provide technical reference for China’s road and bridge engineering design units,to promote the popularity of Civil3D and other advanced design software in the field of engineering design and development,ultimately contributing to the sustainable development of China’s road and bridge engineering.

Optical encryption of multiple three-dimensional objects based on multiple interferences and single-pixel digital holography

We present an optical encryption method of multiple three-dimensional objects based on multiple interferences and single-pixel digital holography. By modifying the Mach-Zehnder interferometer, the interference of the multiple objects beams and the one reference beam is used to simultaneously encrypt multiple objects into a ciphertext. During decryption, each three-dimensional object can be decrypted independently without having to decrypt other objects. Since the single- pixel digital holography based on compressive sensing theory is introduced, the encrypted data of this method is effectively reduced. In addition, recording fewer encrypted data can greatly reduce the bandwidth of network transmission. Moreover, the compressive sensing essentially serves as a secret key that makes an intruder attack invalid, which means that the system is more secure than the conventional encryption method. Simulation results demonstrate the feasibility of the proposed method and show that the system has good security performance.

A combination of digital design and three-dimensional printing to assist treatment of thoracolumbar compression fractures using percutaneous kyphoplasty

Objective:To evaluate the clinical efficacy of the preoperative digita1 design combined with three dimensional(3D)printing models to assist percutaneous kyphoplasty(PKP)treatment for thoracolumbar compression frac tures.Methods:From January 2018 to August 2020,we obtained data of 99 patients diagnosed thoracolumbar compression fractures.These patients were divided into control group(n=50)underwent traditional PKP surgery,and observation group(n=49)underwent preoperative digital design combined with 3D printing model assisted PKP treatment.The clinical efficacy was evaluated with five parameters,including operation time,number of intraoperative radiographs,visual analogue scale(VAS)score,Cobb Angle change,and high compression rate of injured vertebrae.Results:There were statistically significant differences of operation time and number of intraoperative radio graphs between the two groups(P<0.05).For VAS score,Cobb Angle change and vertebral height compression rate,all of these three parameters were significantly improved when the patients accepted surgery teatment in two groups(P<0.05).However,there were no significant differences between control group and observation group for these three parameters either before or after surgery(P>0.05).Conclusions:Through the design of preoperative surgical guide plate and the application of 3D printing model to guide the operation,the precise design of preoperative surgical puncture site and puncture Angle of the injured vertebra was realized,the number of intraoperative radiographs was reduced,the operation time was shortened and the operation efficiency was improved.

Evaluation of Maxillary Dental Arch Widths in Individuals Having Unilateral and Bilateral Cleft Lip and Palate Using Three-Dimensional Digital Models

Aim: Maxillary dental arch widths were evaluated in individuals having unilateral (UCLP) and bilateral (BCLP) cleft lip and palate (CLP) using three-dimensional (3D) digital models. Material and Method: The study had been conducted on 80 individuals aged between 14 - 17 years having UCLP and BCLP. 40 of the individuals had UCLP, whereas 40 had BCLP. The maxillary dental models taken from patients before the treatment were scanned using Orthomodel Programme (v.1.01, Orthomodel Inc., Istanbul, Turkey) to obtain 3D imagery. Student’s t-test was used in order to assess the data obtained by using SPSS software version 22.0. Results: In BCLP, the average inter-canine distance was 17.44 ± 1.31 mm, the average inter-molar distance was 36.57 ± 1.12 mm, while inter-canine/inter-molar ratio was 0.47. Whereas in UCLP, it was 25.10 ± 0.63 mm, 42.20 ± 0.53 mm and 0.59. The inter-canine distance in UCLP was found to be large enough to be statistically significant (p 0.05), even though there were differences in inter-molar widths. Conclusion: For the stable orthodontic treatment results, one of the most important points is arch form and widths to be coherent with each other. In our study, the increase of inter-canine distance seen in UCLP indicates that in the cleft region, the maxillary arch is inclined over to the back, while the same situation in BCLP suggests that the maxillary segments are collapsed inside. The difference in the arch is highly affected by the primary surgical treatment.

Research on the Copyright Protection Technology of Digital Clothing Effect Diagram

As a kind of digital clothing design works,digital clothing effect diagram shows fast and roughly designer intent expression and needs protection of digital copyright protection technology.A novel digital clothing effect diagram copyright protection scheme and some algorithms based on digital image watermark technology are proposed,used by two-dimensional chaotic encryption watermark generation algorithm to generate watermark data,watermark embedding algorithm twice using genetic algorithm to obtain the optimal embedding position and embedding strength,and watermark verification algorithm to determine the copyright ownership.Experimental results and analyses show that the proposed scheme and algorithms have the feasibility and effectiveness.

Digital measurement of bone tumor volume by CT three-dimensional reconstruction technology

Objective To discuss the measurement of bone tumor volume on the basis of three dimensional images segmentation technology. Methods Twenty patients with lacunar bone tumor from Tianjin Hospital and Tongji Hospital were included in the

Digitizing the Undigitized: Converting Traditional Archaeological Records into Computerized, Three-Dimensional Site Reconstruction

Archaeological excavation involves disintegration, removal, and reassembly of the archaeological record;as such it is considered by many to be an unrepeatable, destructive activity. This perception has contributed to an advancement in archaeological practice, namely, the development of computerized recording systems that digitally record archaeological excavations spatially and volumetrically during fieldwork. This paper is concerned with those archaeological sites where digital field recording has not been done. These sites, recorded by traditional methods, should not be excluded from attempts to restructure the spatial, volumetric, and stratigraphic archaeological data. A thorough methodology for the conversion of traditional records into digitized data is presented, including the detailed procedures required for three-dimensional plotting of recorded data—both the excavated material and the drawn site maps and cross-sections. Finally, the use of these methods is demonstrated on a complex Early to Middle Pleistocene site, illustrating the benefits of digitization and three-dimensional reconstruction in resolving stratigraphic and spatial questions.

Three-dimensional(3D) Printing Technology Assisted by Minimally Invasive Surgery for Pubic Rami Fractures

The feasibility of three-dimensional (3D) printing technology cgmbined with minimally invasive surgery in the treatment of pubic rami fractures was explored.From August 2015 to October 2017,a series of 30 patients who underwent surgical stabilization of their anterior pelvic ring (all utilizing the 3D printing technology)by one surgeon at a single hospital were studied.The minimally invasive incisions were made through anterior inferior cilia spine and pubic nodule.Data collected included the operative duration,the blood loss,the damage of the important tissue,the biographic union and therecovery of the function after the operation.Measurements on inlet and outlet pelvic cardiograph were made immediately post-operation and at all follow-up clinic visits.The scores of reduction and function were measured during follow-up.Results showed that the wounds of 30 patients were healed in the first stage,and there was no injury of important structures such as blood vessels and nerves.According to the Matta criteria,excellent effectiveness was obtained in 22 cases and good in 8 cases.According to the functional evaluation criteria of Majeed,excellent effectiveness was obtained in 21 cases and good in 9 cases.It was suggested that the 3D printing technology assisted by minimally invasive surgery can better evaluate the pelvic fracture before operation,which was helpful in plate modeling, and can shorten surgery duration and reduce intraoperative blood loss and complications. The positioning accuracy was improved,and better surgical result was finally achieved.

Quantitative characterization of deformation and damage process by digital volume correlation:A review

Characterizing material 3D deformation and damage is a key challenge in mechanical research. Digital volume correlation （DVC）, as a tool for quantifying the internal mechanical response, can comprehensively study the extraction of key failure parameters. This review summarizes the recent progresses in the study of the internal movement of granular materials, inhomogeneous deformation of composite materials, and stress intensity factor around a crack front in static and fatigue states using DVC. To elaborate on the technique＇s potential, we discussed the accuracy and efficiency of the algorithm and the acquisition of real microstructure data within the material under a complex environment.

Three-Dimensional Computerized Tomography-Assisted Identification of Necrotic Volume, Distribution, Shape and Prognosis of Collapse in ONFH

Objective: We constructed 3D-model of ONFH in computer according to three-dimensional computerized tomography (3D-CT) data. We determined the location and volume of necrosis to investigate its clinical efficacy. Method: Totally 92 hips (59 cases) with ONFH (44 males, 15 females) were included, with mean age of 37.5 years (range from 26 to 58). Totally 20 cases (35 hips) were induced by corticosteroid (CTSs), 31 (49 hips) induced by alcohol, 4 (4 hips) induced by trauma and 4 (4 hips) idiopathic. All the hips were categorized into stage ARCO II. Finally diagnosed by MRI, all hips were scanned by CT to acquire data in DICOM format. The images were imported into software to extract 3D-shape of femoral heads, necrotic foci, their volumes and distribution in each quadrant. Deviation of volumes between digital image and biopsy specimen was analyzed by SAS9.1 package. Correlativity between collapse and volume of necrosis under specific pathogeneses was also analyzed. Among the cases necessitating total hip arthroplasty (THA) due to advancing to ARCO III, we randomly selected 8 of them to perform 3D-CT scanning thrice prior to surgical operation. Total femoral heads harvested were torn asunder. Cubic capacity of femoral heads and necrotic foci were hereby measured and compared with those acquired from digital models. Result: Through the digital model, necrotic foci were found mainly locating within the super lateral portion of femoral head, coinciding with those observed in biopsy specimen. Average volumetric ratio of digitally acquired necrosis focus/femoral head in 58 collapsed hips was 36.8%. The ratio of the 34 hips without collapse was 17.3%. In collapsed femoral heads, the distribution of necrosis focus was 23.4% in quadrant 1 (q1), 23.6% in q2, 12.1% in q3, 14.4% in q4, 9.0% in q5, 11.8% in q6, 1.6% in q7 and 3.9% in q8. In femoral heads without collapse, the distribution was 34.2% in q1, 29.6% in q2, 11.8% in q3, 11.3% in q4, 6.0% in q5, 6.0% in q6, 0.5% in q7 and 0.4% in q8. As for the average cubic capacities of femoral heads and necrotic foci, those acquired from the digital model and biopsy specimen had no significant difference in matched-pairs test (t = -1.49, P = 0.179 for femoral heads and t = -1.52, P = 0.172 for necrotic foci). There was significant difference (F = 2.720, P = 0.035 P was respectively 0.0001 and 0.0005). Decision tree model showed that 94.6% (53/56) hips would progress into collapse if the volumetric ratio of necrotic tissue was over 23.48%. Otherwise, if distribution in q2 was over 45.13%, 83.3% (5/6) hips would progress into collapse. No collapse (0/30) would occur if the distribution of necrotic tissue in q2 was under 45.13%. Conclusion: Digital 3D-model reconstructed from CT scanning can precisely incarnate spatial orientation of necrotic foci in femoral head. Multinomial logistic regression and decision-making tree shows that volumetric ratio of necrotic tissues plays an important role in anticipating collapse of femoral head.

Reconstruction of three-dimensional grain structure in polycrystalline iron via an interactive segmentation method

Using a total of 297 segmented sections,we reconstructed the three-dimensional(3D) structure of pure iron and obtained the largest dataset of 16254 3D complete grains reported to date.The mean values of equivalent sphere radius and face number of pure iron were observed to be consistent with those of Monte Carlo simulated grains,phase-field simulated grains,Ti-alloy grains,and Ni-based super alloy grains.In this work,by finding a balance between automatic methods and manual refinement,we developed an interactive segmentation method to segment serial sections accurately in the reconstruction of the 3D microstructure;this approach can save time as well as substantially eliminate errors.The segmentation process comprises four operations:image preprocessing,breakpoint detection based on mathematical morphology analysis,optimized automatic connection of the breakpoints,and manual refinement by artificial evaluation.

Comparison of Different Reconstruction Algorithms for Decreasing the Exposure Dose during Digital Breast Tomosynthesis: A Phantom Study

We compared reconstruction algorithms [filtered back projection (FBP), maximum likelihood expectation maximization (MLEM), and the simultaneous iterative reconstruction technique (SIRT)] in terms of the radiation dose and image quality, for exploring the possibility of decreasing the radiation dose during digital breast tomosynthesis (DBT). The three algorithms were implemented using a DBT system and experimentally evaluated using measurements, such as signal difference-to-noise ratio (SDNR) and intensity profile, on a BR3D phantom (infocus plane image). The possible radiation dose reduction, contrast improvement, and artifact reduction in DBT were evaluated using different exposure levels and the three reconstruction techniques. We performed statistical analysis (one-way analysis of variance) of the SDNR data. The effectiveness of each technique for enhancing the visibility of the BR3D phantom was quantified with regard to SDNR (FBP versus MLEM, P < 0.05;FBP vs. SIRT, P < 0.05;MLEM vs. SIRT, P = 0.945);the artifact reduction was quantified with regard to the intensity profile. MLEM and SIRT produced reconstructed images with SDNR values indicative of low-contrast visibility. The SDNR value for the half-radiation dose MLEM and SIRT images was close to that of the FBP reference radiation dose image. Artifacts were decreased in the MLEM and SIRT images (in the infocus plane) according to the intensity profiles that we obtained. With MLEM and SIRT, the radiation dose may be decreased to half comparison with FBP.

Soft pneumatic actuators by digital light processing combined with injection-assisted post-curing

The soft robotics display huge advantages over their rigid counterparts when interacting with living organisms and fragile objects.As one of the most efficient actuators toward soft robotics,the soft pneumatic actuator(SPA)can produce large,complex responses with utilizing pressure as the only input source.In this work,a new approach that combines digital light processing(DLP)and injection-assisted post-curing is proposed to create SPAs that can realize different functionalities.To enable this,we develop a new class of photo-cross linked elastomers with tunable mechanical properties,good stretchability,and rapid curing speed.By carefully designing the geometry of the cavities embedded in the actuators,the resulting actuators can realize contracting,expanding,flapping,and twisting motions.In addition,we successfully fabricate a soft self-sensing bending actuator by injecting conductive liquids into the three-dimensional(3D)printed actuator,demonstrating that the present method has the potential to be used to manufacture intelligent soft robotic systems.

A Robust Optical Encryption Method for Three-Dimensional Object Based on the Fresnel Transform

An optical encryption of three-dimensional (3D) object with digital holography was implemented. In the process of encryption, two holograms involved recording key information and 3D object were obtained. In the process of decryption, the 3D object was reconstructed from the two holograms by extracting the object and key information, followed by multiplication of the two holograms and inverse Fresnel transform numerically. The robustness of the method was also tested for different occlusions attacks and Gaussian noises. The results showed that the method was able to encrypt and decrypt the 3D object while being robust under different occlusions attacks and Gaussian noises.

Application of digital technology in nasal reconstruction

Nasal defects are facial defects caused by trauma,tumors,or congenital diseases that seriously damage a patient’s physical and mental health.Nasal defects,from skin defects to total nasal defects,require surgical repair and reconstruction to restore the appearance and function of the nose,which have always been challenges for rhinoplasty.The development of digital technology has increased the possibility of nasal reconstruction.Digital technology is involved in the preoperative,intraoperative,and postoperative stages of nasal construction and is of great significance in improving the effect of this surgery.This article reviews the application of major digital technologies,including three-dimensional(3D)imaging technology,computer-assisted surgical navigation,and 3D printing,in nasal reconstruction and discusses the shortcomings of the current application of digital technology.

Three-Dimensional Volumetric Analysis of Venous Malformations for Assessing the Effectiveness of Percutaneous Sclerotherapy

BACKGROUND Percutaneous sclerotherapy can be used to successfully treat venous malformations(VMs)of the head,neck,and limbs.However,the standard curative effect of sclerotherapy has rarely been analyzed,and there is currently no accurate statistical method to measure the volume of VMs after sclerotherapy.Here,we propose a novel threedimensional(3D)reconstruction method to evaluate this effect.OBJECTIVE To test the feasibility of 3D software(MIMICS 19.0)to evaluate the treatment effect of sclerotherapy.METHODS This retrospective study included patients with VMs on the head,neck,and limbs who were treated with ethanol sclerotherapy or foam sclerotherapy every 8 weeks.MIMICS 19.0 was used to calculate the performance of the lesion after treatment and measure the VM volumes before and after the treatment.The effect of the clinical treatment dose on the lesion was evaluated,and the treatment effect of each patient was recorded.The relationship between the number of treatments and the reduced volume of VMs was analyzed.RESULTS Based on the MIMICS-calculated regions of interest(ROI),we found that 1 mL of ethanol reduced the lesion by 473 mm3 and that one dosage of foam(1 mL of polidocanol and 4 mL air content)reduced the lesion by 2138 mm3,demonstrating that the foam sclerosing agent exhibited greater efficacy in this study.CONCLUSIONS The MIMICS 3D volume reconstruction method can effectively and safely evaluate the efficacy of sclerotherapy and provide a preoperative evaluation.This method is simple,accurate,and feasible.

Three-dimensional digital technology-assisted precise tumor resection and reconstruction of the femoral trochanter and postoperative functional recovery:a retrospective study

Background The trochanter of the femur is a common site for bone tumors.However,locating the specificboundary of bone tumor infiltration and determining the surgical method can be challenging.The objective of thisstudy was to review the diagnosis,treatment,and surgical outcomes of patients with tumors or tumor-like changesin the femoral trochanter after computer-assisted precise tumor resection and hip-preserving reconstruction ofthe trochanter.Methods From January 2005 to September 2020,11 patients with trochanteric tumors(aged:18–53 years;sixmales and five females)were treated in Guangzhou First People’s Hospital.The cases included aneurysmal bonecyst(n=1),giant cell tumor of bone(n=2),fibrous histiocytoma of bone(n=1),endochondroma(n=1),andfibrous dysplasia of bone(n=6).For patients with trochanteric tumors,computed tomography and magnetic resonance imaging scanning were performed before operation to obtain two-dimensional image data of the lesion.Athree-dimensional digital model of bilateral lower limbs was reconstructed by computer technology,the boundary of tumor growth was determined by computer simulation,the process of tumor resection and reconstructionwas simulated,and the personalized guide template was designed.During the operation,the personalized guideplate guided the precise resection of the tumor,and the allogeneic bone was trimmed to match the shape of thebone defect.Results All 11 patients underwent accurate resection of the tumor or tumor-like lesion and reconstruction ofthe hip.In eight cases,the lesion was confined to the trochanter,which was fixed with large segment allogeneicbone,autologous iliac bone,and proximal femoral anatomic plate.In three cases,allogeneic bone,autologousiliac bone,and femoral reconstruction nail were used to fix the tumor under the trochanter.Postoperative Xray examination showed that the repair and reconstruction of the bone defect was effective,and callus bridgingbetween the allogenic bone and autogenous bone was observed 6 months after operation.All patients recoveredtheir walking function 3–6 months after operation.The duration of the follow-up period ranged from 6 monthsto 6 years.A patient experienced recurrence of endochondroma;pathological examination revealed chondrocyticsarcoma.The remaining 10 patients were treated with segmental resection and reconstruction.The operationtime ranged 2.5–4.5 h(average:3.2 h).Intraoperative blood loss ranged from 300 to 500 ml(average:368 ml).The local recurrence rate was 9.1%,and the overall survival rate was 100%.The average Musculoskeletal TumorSociety score was 27(excellent and good for eight and three patients,respectively).Conclusions Three-dimensional computer skeleton modeling and simulation-assisted resection and reconstruction of femoral trochanteric tumor is a new surgical technique,which might markedly improve the surgical effect,shorten the surgical time,increase the overall survival rate of patients with tumors,reduce the local recurrencerate,assist in the digitization and programming of femoral trochanteric tumor surgery,and improve surgicalaccuracy.

人工智能视域下非遗服饰数字化再现与创新设计研究

非遗服饰承载着丰富的历史文化,具有独特的艺术价值,但随着社会的发展逐渐濒临失传,急需借助现代技术手段进行有效保护和创新传承。在信息技术飞速发展的背景下,人工智能已成为推动各领域创新的强大引擎。在非遗服饰的数字化再现与创新设计中,人工智能可以辅助建设数字化档案,进行复原和重现,可以利用虚拟现实技术进行互动体验,可以基于机器学习进行设计创新,为非遗服饰的数字化再现与创新设计提供理论指导,切实推动非遗服饰的保护和传承。

数字化技术在服装设计与工程专业毕业设计中的应用

数字化技术为服装专业的发展带来了新的变化和挑战。通过分析服装专业毕业设计完成过程中表现形式单一、制作效率低等现状,提出将数字化技术运用在毕业设计中的改革措施,结合服装设计与工程专业近3年毕业设计案例,阐述数字化技术在毕业设计作品制作过程中的作用和优势,体现在优化结构设计、完善产品细节、提高生产效率等方面。旨在提高毕业设计的水平和质量,推动服装设计与工程专业的数字化发展。同时,展望未来数字化技术在服装设计与工程专业毕业设计中的发展方向。

元宇宙对互联网时代鞋服市场影响的讨论

随着各大互联网企业对元宇宙的布局,互联网时代向元宇宙时代转变的趋势明显,未来现实产业将不断卷入虚拟社会。本文分析了互联网时代向元宇宙时代迈进中科技的进步对鞋服市场所产生的影响,进而从商品属性、市场环境、服务模式以及技术4个基本要素分别阐述鞋服行业所发生的改变,为今后鞋服市场的发展提供新思路。