Twisting the stacking of layered materials leads to rich new physics. A three-dimensional topological insulator film hosts two-dimensional gapless Dirac electrons on top and bottom surfaces, which, when the film is be...Twisting the stacking of layered materials leads to rich new physics. A three-dimensional topological insulator film hosts two-dimensional gapless Dirac electrons on top and bottom surfaces, which, when the film is below some critical thickness, will hybridize and open a gap in the surface state structure. The hybridization gap can be tuned by various parameters such as film thickness and inversion symmetry, according to the literature. The three-dimensional strong topological insulator Bi(Sb)Se(Te) family has layered structures composed of quintuple layers(QLs) stacked together by van der Waals interaction. Here we successfully grow twistedly stacked Sb_2Te_3 QLs and investigate the effect of twist angels on the hybridization gaps below the thickness limit. It is found that the hybridization gap can be tuned for films of three QLs, which may lead to quantum spin Hall states.Signatures of gap-closing are found in 3-QL films. The successful in situ application of this approach opens a new route to search for exotic physics in topological insulators.展开更多
The classification of spatial characteristics and discharge modes of dielectric barrier discharge(DBD)are gaining increasing attention in industrial applications,especially in the field of surface treatment of materia...The classification of spatial characteristics and discharge modes of dielectric barrier discharge(DBD)are gaining increasing attention in industrial applications,especially in the field of surface treatment of materials.In this work,gray level histogram(GLH)and Fourier energy spectrum based on the digital image processing tech no logy are applied to investigate the spatial structure and discharge mode of mesh-plate DBD.The coefficient of variation(CV)is calculated to describe the uniformity of the discharge.The results show that the discharge mode of mesh-plate DBD changes from periodic discharge to filamentary discharge when the applied voltage increases from 11-15 kV.Moreover,a more regular spatial structure is obtained under lower applied voltages during the discharge process.It is also found that the apertures of mesh electrodes which are below 1 mm have smaller values of CV compared to plate electrodes,indicating more uniform discharge.Finally,polypropylene is treated by mesh-plate DBD for surface modification.The hydrophilicity is significantly improved as the water contact angle decreased by 64°,and the dyeing depth is also enhanced.展开更多
Objective To study mechanism of various effects of HLA antigen camouflaged by differentmPEGs. Methods Effects of the modification of HLA antigen camouflaged by various mPEGs were detected by microlymphocytotoxicity te...Objective To study mechanism of various effects of HLA antigen camouflaged by differentmPEGs. Methods Effects of the modification of HLA antigen camouflaged by various mPEGs were detected by microlymphocytotoxicity test. The ability of modification was detected by SDS-PAGE. The mechanism of the modification was depicted by the three-dimensional structure of HLA antigen. Results The specific reaction between HLA-A2 antigen and its antibody were completely blocked by mPEG-BTC and mPEG-SPA. mPEG-MAL did not camouflage HLA antigen. The diversity of the modification of HLA antigen camouflaged by varied mPEGs was closely associated with the amides displayed on the surface of HLA antigen. Conclusion Only the amides which were exposed to the surface of HLA antigen can be camouflaged by mPEG. The amides on the surface of three-dimensional structure of HLA-A2 antigen determine the effect of the modification by various mPEGs.展开更多
Lithium(Li)metal is believed to be the“Holy Grail”among all anode materials for next-generation Li-based batteries due to its high theoretical specific capacity(3860 mAh/g)and lowest redox potential(−3.04 V).Disappo...Lithium(Li)metal is believed to be the“Holy Grail”among all anode materials for next-generation Li-based batteries due to its high theoretical specific capacity(3860 mAh/g)and lowest redox potential(−3.04 V).Disappointingly,uncontrolled dendrite formation and“hostless”deposition impede its further development.It is well accepted that the construction of three-dimensional(3D)composite Li metal anode could tackle the above problems to some extent by reducing local current density and maintaining electrode volume during cycling.However,most strategies to build 3D composite Li metal anode require either electrodeposition or melt-infusion process.In spite of their effectiveness,these procedures bring multiple complex processing steps,high temperature,and harsh experimental conditions which cannot meet the actual production demand in consideration of cost and safety.Under this condition,a novel method to construct 3D composite anode via simple mechanical modification has been recently proposed which does not involve harsh conditions,fussy procedures,or fancy equipment.In this mini review,a systematic and in-depth investigation of this mechanical deformation technique to build 3D composite Li metal anode is provided.First,by summarizing a number of recent studies,different mechanical modification approaches are classified clearly according to their specific procedures.Then,the effect of each individual mechanical modification approach and its working mechanisms is reviewed.Afterwards,the merits and limits of different approaches are compared.Finally,a general summary and perspective on construction strategies for next-generation 3D composite Li anode are presented.展开更多
基金Supported by the National Natural Science Foundation of China (Grant Nos.61804056 and 92065102)。
文摘Twisting the stacking of layered materials leads to rich new physics. A three-dimensional topological insulator film hosts two-dimensional gapless Dirac electrons on top and bottom surfaces, which, when the film is below some critical thickness, will hybridize and open a gap in the surface state structure. The hybridization gap can be tuned by various parameters such as film thickness and inversion symmetry, according to the literature. The three-dimensional strong topological insulator Bi(Sb)Se(Te) family has layered structures composed of quintuple layers(QLs) stacked together by van der Waals interaction. Here we successfully grow twistedly stacked Sb_2Te_3 QLs and investigate the effect of twist angels on the hybridization gaps below the thickness limit. It is found that the hybridization gap can be tuned for films of three QLs, which may lead to quantum spin Hall states.Signatures of gap-closing are found in 3-QL films. The successful in situ application of this approach opens a new route to search for exotic physics in topological insulators.
基金financial support from the Joint Funds of National Natural Science Foundation of China(No.U1462105)
文摘The classification of spatial characteristics and discharge modes of dielectric barrier discharge(DBD)are gaining increasing attention in industrial applications,especially in the field of surface treatment of materials.In this work,gray level histogram(GLH)and Fourier energy spectrum based on the digital image processing tech no logy are applied to investigate the spatial structure and discharge mode of mesh-plate DBD.The coefficient of variation(CV)is calculated to describe the uniformity of the discharge.The results show that the discharge mode of mesh-plate DBD changes from periodic discharge to filamentary discharge when the applied voltage increases from 11-15 kV.Moreover,a more regular spatial structure is obtained under lower applied voltages during the discharge process.It is also found that the apertures of mesh electrodes which are below 1 mm have smaller values of CV compared to plate electrodes,indicating more uniform discharge.Finally,polypropylene is treated by mesh-plate DBD for surface modification.The hydrophilicity is significantly improved as the water contact angle decreased by 64°,and the dyeing depth is also enhanced.
基金Supported by the National High Technology Research and Development Program(2001AA261161) of China(863 Program).
文摘Objective To study mechanism of various effects of HLA antigen camouflaged by differentmPEGs. Methods Effects of the modification of HLA antigen camouflaged by various mPEGs were detected by microlymphocytotoxicity test. The ability of modification was detected by SDS-PAGE. The mechanism of the modification was depicted by the three-dimensional structure of HLA antigen. Results The specific reaction between HLA-A2 antigen and its antibody were completely blocked by mPEG-BTC and mPEG-SPA. mPEG-MAL did not camouflage HLA antigen. The diversity of the modification of HLA antigen camouflaged by varied mPEGs was closely associated with the amides displayed on the surface of HLA antigen. Conclusion Only the amides which were exposed to the surface of HLA antigen can be camouflaged by mPEG. The amides on the surface of three-dimensional structure of HLA-A2 antigen determine the effect of the modification by various mPEGs.
文摘Lithium(Li)metal is believed to be the“Holy Grail”among all anode materials for next-generation Li-based batteries due to its high theoretical specific capacity(3860 mAh/g)and lowest redox potential(−3.04 V).Disappointingly,uncontrolled dendrite formation and“hostless”deposition impede its further development.It is well accepted that the construction of three-dimensional(3D)composite Li metal anode could tackle the above problems to some extent by reducing local current density and maintaining electrode volume during cycling.However,most strategies to build 3D composite Li metal anode require either electrodeposition or melt-infusion process.In spite of their effectiveness,these procedures bring multiple complex processing steps,high temperature,and harsh experimental conditions which cannot meet the actual production demand in consideration of cost and safety.Under this condition,a novel method to construct 3D composite anode via simple mechanical modification has been recently proposed which does not involve harsh conditions,fussy procedures,or fancy equipment.In this mini review,a systematic and in-depth investigation of this mechanical deformation technique to build 3D composite Li metal anode is provided.First,by summarizing a number of recent studies,different mechanical modification approaches are classified clearly according to their specific procedures.Then,the effect of each individual mechanical modification approach and its working mechanisms is reviewed.Afterwards,the merits and limits of different approaches are compared.Finally,a general summary and perspective on construction strategies for next-generation 3D composite Li anode are presented.
