Three-dimensional stability calculation method for high and large composite slopes formed by mining stope and inner dump in adjacent open pits

The 2D limit equilibrium method is widely used for slope stability analysis.However,with the advancement of dump engineering,composite slopes often exhibit significant 3D mechanical effects.Consequently,it is of significant importance to develop an effective 3D stability calculation method for composite slopes to enhance the design and stability control of open-pit slope engineering.Using the composite slope formed by the mining stope and inner dump in Baiyinhua No.1 and No.2 open-pit coal mine as a case study,this research investigates the failure mode of composite slopes and establishes spatial shape equations for the sliding mass.By integrating the shear resistance and sliding force of each row of microstrip columns onto the bottom surface of the strip corresponding to the main sliding surface,a novel 2D equivalent physical and mechanical parameters analysis method for the strips on the main sliding surface of 3D sliding masses is proposed.Subsequently,a comprehensive 3D stability calculation method for composite slopes is developed,and the quantitative relationship between the coordinated development distance and its 3D stability coefficients is examined.The analysis reveals that the failure mode of the composite slope is characterized by cutting-bedding sliding,with the arc serving as the side interface and the weak layer as the bottom interface,while the destabilization mechanism primarily involves shear failure.The spatial form equation of the sliding mass comprises an ellipsoid and weak plane equation.The analysis revealed that when the coordinated development distance is 1500 m,the error rate between the 3D stability calculation result and the 2D stability calculation result of the composite slope is less than 8%,thereby verifying the proposed analytical method of equivalent physical and mechanical parameters and the 3D stability calculation method for composite slopes.Furthermore,the3D stability coefficient of the composite slope exhibits an exponential correlation with the coordinated development distance,with the coefficient gradually decreasing as the coordinated development distance increases.These findings provide a theoretical guideline for designing similar slope shape parameters and conducting stability analysis.

Three-dimensional stability of landslides based on local safety factor

Unlike the limit equilibrium method(LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor(LSF) method is proposed to evaluate the stability of different sections of a landslide in this paper. Based on three-dimensional(3D) numerical simulation results, the local safety factor is defined as the ratio of the shear strength of the soil at an element on the slip zone to the shear stress parallel to the sliding direction at that element. The global safety factor of the landslide is defined as the weighted average of all local safety factors based on the area of the slip surface. Some example analyses show that the results computed by the LSF method agree well with those calculated by the General Limit Equilibrium(GLE) method in two-dimensional(2D) models and the distribution of the LSF in the 3D slip zone is consistent with that indicated by the observed deformation pattern of an actual landslide in China.

Three-dimensional stability analysis of anisotropic and non-homogeneous slopes using limit analysis

A method of three-dimensional loaded slope stability for anisotropic and nonhomogeneous slopes was presented based on the upper-bound theorem of the limit analysis approach. The approach can be considered as a modification and extension of the solutions. The influences of friction angle, anisotropy factor, nonhomogeneous factor, slope angle, ratio of width to depth, and load on the slope crest were investigated. The results show that solutions are suitable to deal with the purely cohesive soils and frictional/cohesive soils, isotropic and anisotropic, homogeneous and nonhomogeneous, loaded and unloaded cases.

A three-dimensional numerical study on the stability of layered rock spillway tunnels in alpine canyon areas

Rock masses in alpine canyon areas exhibit strong heterogeneity,discontinuity,and are subject to strong tectonic effects and stress unloading,leading to extremely complex distribution of in-situ stress.In addition,the occurrence of layered rock masses makes it more complex,with obvious anisotropic mechanical properties.This study proposes a comprehensive method for evaluating the stability of layered rock spillway tunnels in a hydropower station in an alpine canyon.First,the failure criterion and mechanical model of layered rock masses considering the anisotropy induced by the bedding plane and the true triaxial stress regime were established;an inversion theory and calculation procedure for in-situ stress in alpine canyon areas were then introduced.Finally,by using a self-developed numerical tool,i.e.CASRock,the stability of the layered rock spillway tunnel in a hydropower station was numerically analyzed.The results show that,affected by geological structure and stratigraphic lithology,there is significant differentiation in the in-situ stress in alpine canyons,with horizontal tectonic stress as the main factor.The occurrence of layered rock masses in the region has a significant impact on the stability of surrounding rock,and the angle between the bedding strike and the tunnel axis as well as the bedding dip both exert a significant influence on the failure characteristics of the surrounding rock.

Stability of Three-Dimensional Trunk Motion

Aim To analyse stability of the three-dimensional rotational movements of a human torso system under perturbations using anatomical data of muscles (McGill, 1992). Methods To use the linearized analysis methods and a special model in which the effect of ligamentous and passive resitance by discs and fibers is included. Results The model is capable of predicting the muscle forces,and joint reaction forces at the L5/Sl which are the biomechani- cal factors used to asses the risk of the discs and annulus fibers. Conclusions It can also be used to analyze and neural excitation levels for a diverse Set of trunk movement.

Effect of external and internal cues on core muscle activation during the Sahrmann five-level core stability test

BACKGROUND Pain in the back or pelvis or fear of back pain may affect the timing or cocontraction of the core muscles.In both static and dynamic movements,the Sahrmann core stability test provides an assessment of core muscle activation and a person's ability to stabilize the lumbopelvic complex.Preparatory cues and images can be used to increase the activation of these muscles.To attain optimal movement patterns,it will be necessary to determine what cueing will give the most effective results for core stability.AIM To investigate the effects of external and internal cues on core muscle activation during the Sahrmann five-level core stability test.METHODS Total 68 participants(21.83±3.47 years)were randomly allocated to an external(n=35)or internal cue group(n=33).Participants performed the Sahrmann fivelevel core stability test without a cue as baseline and the five-level stability exercises with an internal or external cue.External cue group received a pressure biofeedback unit(PBU),and the internal cue group received an audio cue.A Delsys Trigno^(TM)surface electromyography unit was used for muscle activation from the rectus abdominis,external oblique,and transverse abdominis/internal oblique muscles.RESULTS Linear mixed effects model analysis showed that cueing had a significant effect on core muscle activation(P=0.001);however,there was no significant difference between cue types(internal or external)(P=0.130).CONCLUSION Both external and internal cueing have significant effects on core muscle activation during the Sahrmann five-level core stability test and the PBU does not create higher muscle activation than internal cueing.

Recent progress on stability and applications of flexible perovskite photodetectors

Flexible photodetectors have garnered significant attention by virtue of their potential applications in environmental monitoring,wearable healthcare,imaging sensing,and portable optical communications.Perovskites stand out as particularly promising materials for photodetectors,offering exceptional optoelectronic properties,tunable band gaps,low-temperature solution processing,and notable mechanical flexibility.In this review,we explore the latest progress in flexible perovskite photodetectors,emphasizing the strategies developed for photoactive materials and device structures to enhance optoelectronic performance and stability.Additionally,we discuss typical applications of these devices and offer insights into future directions and potential applications.

Effects of spatial heterogeneity on pseudo-static stability of coal mine overburden dump slope,using random limit equilibrium and random finite element methods:A comparative study

Sudden and unforeseen seismic failures of coal mine overburden(OB)dump slopes interrupt mining operations,cause loss of lives and delay the production of coal.Consideration of the spatial heterogeneity of OB dump materials is imperative for an adequate evaluation of the seismic stability of OB dump slopes.In this study,pseudo-static seismic stability analyses are carried out for an OB dump slope by considering the material parameters obtained from an insitu field investigation.Spatial heterogeneity is simulated through use of the random finite element method(RFEM)and the random limit equilibrium method(RLEM)and a comparative study is presented.Combinations of horizontal and vertical spatial correlation lengths were considered for simulating isotropic and anisotropic random fields within the OB dump slope.Seismic performances of the slope have been reported through the probability of failure and reliability index.It was observed that the RLEM approach overestimates failure probability(P_(f))by considering seismic stability with spatial heterogeneity.The P_(f)was observed to increase with an increase in the coefficient of variation of friction angle of the dump materials.Further,it was inferred that the RLEM approach may not be adequately applicable for assessing the seismic stability of an OB dump slope for a horizontal seismic coefficient that is more than or equal to 0.1.

Limit analysis for the seismic stability of three-dimensional rock slopes using the generalized Hoek-Brown criterion

The parameters that influence slope stability and their criteria of failure are fairly understood but over-conservative design approaches are often preferred,which can result in excessive overburden removal that may jeopardize profitability in the context of open pit mining.Numerical methods such as finite element and discrete element modelling are instrumental to identify specific zones of stability,but they remain approximate and do not pinpoint the critical factors that influence stability without extensive parametric studies.A large number of degrees of freedom and input parameters may make the outcome of numerical modelling insufficient compared to analytical solutions.Existing analytical approaches have not tackled the stability of slopes using non-linear plasticity criteria and threedimensional failure mechanisms.This paper bridges this gap by using the yield design theory and the Hoek-Brown criterion.Moreover,the proposed model includes the effect of seismic forces,which are not always taken into account in slope stability analyses.The results are presented in the form of rigorous mathematical expressions and stability charts involving the loading conditions and the rock mass properties emanating from the plasticity criterion.

Criteria for the Nonlinear Stability of Three-Dimensional Quasi-Geostrophic Motions

Some more proper criteria for the nonlinear stability of three-dimensional quasi-geostrophic motions are given by combining variational principle with a prior estimates method. The criteria are suitable for perturbations of initial condition as well as parameters in the model. The basic flow can be steady or unsteady. Particularly the difficulty due to the nonlinear boundary condition is completely overcome by the use of our method.

Probabilistic seismic stability of three-dimensional slopes by pseudo-dynamic approach

Probabilistic analysis is a rational approach for engineering design because it provides more insight than traditional deterministic analysis. Probabilistic evaluation on seismic stability of three dimensional (3D) slopes is studied in this paper. The slope safety factor is computed by combining the kinematic approach of limit analysis using a three-dimensional rotational failure mechanism with the pseudo-dynamic approach. The variability of input parameters, including six pseudo-dynamic parameters and two soil shear strength parameters, are taken into account by means of Monte-Carlo Simulations (MCS) method. The influences of pseudo-dynamic input variables on the computed failure probabilities are investigated and discussed. It is shown that the obtained failure probabilities increase with the pseudo-dynamic input variables and the pseudo-dynamic approach gives more conservative failure probability estimates compared with the pseudo-static approach.

Analytical Solutions for Three-Dimensional Stability of Limited Slopes

A method of three-dimensional limited slope stability analysis is presented here based on the upperbound theorem of the limit analysis approach.A rotating collapse mechanism is considered in which energy dissipation takes place along curve velocity discontinuities.In the frictional soils,the failure surface has the shape of logarithm helicoids,with track outline defined by log-spirals.In the cohesive soils,the shape of the failure surface is torus.Angle is considered at slope top,and the critical height is less than top with no inclination.Numerical results of the proposed algorithm are presented in the form of nondimensional graphs.Some examples illustrate the practical use of the results.

On the Nonlinear Stability of Three-Dimensional Quasigeostrophic Motions in Spherical Geometry

Nonlinear stability criteria for the motions geoverned by three-dimensional quasigeostrophic model in spherical geometry are obtained by using Arnol＇d＇s variational principle and a priori estimate method. The results gained in this paper are parallel to Arnol＇d＇s second theorem and better than the known results. Especially, under the approximation of vertically integrated nondivergency, criteria corresponding to Arnol＇d＇s second theorem are first established by a detailed analysis.

Undrained Stability Analysis of Three-Dimensional Rectangular Trapdoor in Clay

A new collapse model of the trapdoors,three-dimensional rectangular trapdoor(3DRT),is presented for ground surface collapse.Undrained stability of 3DRT is examined with the upper bound method of plasticity limit analysis theory.The soil where the trapdoors are located is assumed to be a perfectly plastic model with a Tresca yield criterion.Block analysis technique is employed to investigate the collapse of 3DRT.The model is divided into five different block types and added up to ten rigid blocks.According to the law of conservation of energy,the critical stability ratios of 3DRT are obtained through a search proceeding.The results of upper bound solution for 3DRT are given,and three trapdoor models with depth various are discussed during the application in the stability analysis of square trapdoors.The critical stability ratios can be used in the design of underground excavation and support force.

Influence of fracture roughness on shear strength,slip stability and permeability:A mechanistic analysis by three-dimensional digital rock modeling

Subsurface fluid injections can disturb the effective stress regime by elevating pore pressure and potentially reactivate faults and fractures.Laboratory studies indicate that fracture rheology and permeability in such reactivation events are linked to the roughness of the fracture surfaces.In this study,we construct numerical models using discrete element method(DEM)to explore the influence of fracture surface roughness on the shear strength,slip stability,and permeability evolution during such slip events.For each simulation,a pair of analog rock coupons(three-dimensional bonded quartz particle analogs)representing a mated fracture is sheared under a velocity-stepping scheme.The roughness of the fracture is defined in terms of asperity height and asperity wavelength.Results show that(1)Samples with larger asperity heights(rougher),when sheared,exhibit a higher peak strength which quickly devolves to a residual strength after reaching a threshold shear displacement;(2)These rougher samples also exhibit greater slip stability due to a high degree of asperity wear and resultant production of wear products;(3)Long-term suppression of permeability is observed with rougher fractures,possibly due to the removal of asperities and redistribution of wear products,which locally reduces porosity in the dilating fracture;and(4)Increasing shear-parallel asperity wavelength reduces magnitudes of stress drops after peak strength and enhances fracture permeability,while increasing shear-perpendicular asperity wavelength results in sequential stress drops and a delay in permeability enhancement.This study provides insights into understanding of the mechanisms of frictional and rheological evolution of rough fractures anticipated during reactivation events.

Three-dimensional MHD flow over a shrinking sheet: Analytical solution and stability analysis

The magnetohydrodynamic（MHD） steady and unsteady axisymmetric flows of a viscous fluid over a two-dimensional shrinking sheet are addressed. The mathematical analysis is carried out in the presence of a large magnetic field. The steady state problem results in a singular perturbation problem having an infinite domain singularity. The secular term appearing in the solution is removed and a two-term uniformly valid solution is derived using the Lindstedt–Poincaré technique. This asymptotic solution is validated by comparing it with the numerical solution. The solution for the unsteady problem is also presented analytically in the asymptotic limit of large magnetic field. The results of velocity profile and skin friction are shown graphically to explore the physical features of the flow field. The stability analysis of the unsteady flow is made to validate the asymptotic solution.

Influences of nonassociated flow rules on three-dimensional seismic stability of loaded slopes

The influences of soil dilatancy angle on three-dimensional （3D） seismic stability of locally-loaded slopes in nonassociated flow rule materials were investigated using a new rotational collapse mechanism and quasi-static coefficient concept. Extended Bishop method and Boussinesq theorem were employed to establish the stress distribution along the rupture surfaces that are required to obtain the rate of internal energy dissipation for the nonassociated flow rule materials in rotational collapse mechanisms. Good agreement was observed by comparing the current results with those obtained using the translational or rotational mechanisms and numerical finite difference method. The results indicate that the seismic stability of slopes reduces by decreasing the dilatancy angle for nonassociated flow rule materials. The amount of the mentioned decrease is more significant in the case of mild slopes in frictional soils. A nearly infinite slope under local loading, whether its critical failure surface is 2D or 3D, not only depends on the magnitude of the external load, but also depends on the dilataney angle of soil and the coefficient of seismic load.

Three-Dimensional Stability Analysis of Excavation Using Limit Analysis

The theory of limit analysis is presented for a three-dimensional stability problem of excavation. In frictional soil, the failure surface has the shape of logarithm helicoid, with the outline profile defined by a log- spiral curve. The internal dissipation rate of energy caused by soil cohesion and gravity power of the failure soil is obtained through theoretical derivation. By solving the energy balance equation, the stability factor for the excavation is obtained. Influence of the ratio of width to height, the slope angle, and the top angle on the stability is examined. Numerical results of the proposed algorithm are presented in the form of non dimensional graph. Examples illustrate the practical use of the results.

Three-dimensional critical slip surface locating and slope stability assessment for lava lobe of Unzen volcano

Even Unzen volcano has been declared to be in a state of relative dormancy,the latest formed lava lobe No.11 now represents a potential slope failure mass based on the latest research.This paper concentrates on the stability of the lava lobe No.11 and its possible critical sliding mass.It proposes geographic information systems (GIS) based three-dimensional (3D) slope stability analysis models.It uses a 3D locating approach to identify the 3D critical slip surface and to analyze the 3D stability of the lava lobe No.11.At the same time,the new 3D approach shows the effectiveness in selecting the range of the Monte Carlo random variables and locating the critical slip surface in different parts of the lava lobe No.11.The results are very valuable for judging the stability of the lava lobe and assigning the monitoring equipments.

Stability analysis and modeling for the three-dimensional Darcy-Forchheimer stagnation point nanofluid flow towards a moving surface

In this research,the three-dimensional(3D)steady and incompressible laminar Homann stagnation point nanofluid flow over a porous moving surface is addressed.The disturbance in the porous medium has been characterized by the Darcy-Forchheimer relation.The slip for viscous fluid is considered.The energy equation is organized in view of radiative heat flux which plays an important role in the heat transfer rate.The governing flow expressions are first altered into first-order ordinary ones and then solved numerically by the shooting method.Dual solutions are obtained for the velocity,skin friction coefficient,temperature,and Nusselt number subject to sundry flow parameters,magnetic parameter,Darcy-Forchheimer number,thermal radiation parameter,suction parameter,and dimensionless slip parameter.In this research,the main consideration is given to the engineering interest like skin friction coefficient(velocity gradient or surface drag force)and Nusselt number(temperature gradient or heat transfer rate)and discussed numerically through tables.In conclusion,it is noticed from the stability results that the upper branch solution(UBS)is more reliable and physically stable than the lower branch solution(LBS).