Evaluating the use of three-dimensional reconstruction visualization technology for precise laparoscopic resection in gastroesophageal junction cancer

BACKGROUND Laparoscopic gastrectomy for esophagogastric junction(EGJ)carcinoma enables the removal of the carcinoma at the junction between the stomach and esophagus while preserving the gastric function,thereby providing patients with better treatment outcomes and quality of life.Nonetheless,this surgical technique also presents some challenges and limitations.Therefore,three-dimensional reconstruction visualization technology(3D RVT)has been introduced into the procedure,providing doctors with more comprehensive and intuitive anatomical information that helps with surgical planning,navigation,and outcome evaluation.AIM To discuss the application and advantages of 3D RVT in precise laparoscopic resection of EGJ carcinomas.METHODS Data were obtained from the electronic or paper-based medical records at The First Affiliated Hospital of Hebei North University from January 2020 to June 2022.A total of 120 patients diagnosed with EGJ carcinoma were included in the study.Of these,68 underwent laparoscopic resection after computed tomography(CT)-enhanced scanning and were categorized into the 2D group,whereas 52 underwent laparoscopic resection after CT-enhanced scanning and 3D RVT and were categorized into the 3D group.This study had two outcome measures:the deviation between tumor-related factors(such as maximum tumor diameter and infiltration length)in 3D RVT and clinical reality,and surgical outcome indicators(such as operative time,intraoperative blood loss,number of lymph node dissections,R0 resection rate,postoperative hospital stay,postoperative gas discharge time,drainage tube removal time,and related complications)between the 2D and 3D groups.RESULTS Among patients included in the 3D group,27 had a maximum tumor diameter of less than 3 cm,whereas 25 had a diameter of 3 cm or more.In actual surgical observations,24 had a diameter of less than 3 cm,whereas 28 had a diameter of 3 cm or more.The findings were consistent between the two methods(χ^(2)=0.346,P=0.556),with a kappa consistency coefficient of 0.808.With respect to infiltration length,in the 3D group,23 patients had a length of less than 5 cm,whereas 29 had a length of 5 cm or more.In actual surgical observations,20 cases had a length of less than 5 cm,whereas 32 had a length of 5 cm or more.The findings were consistent between the two methods(χ^(2)=0.357,P=0.550),with a kappa consistency coefficient of 0.486.Pearson correlation analysis showed that the maximum tumor diameter and infiltration length measured using 3D RVT were positively correlated with clinical observations during surgery(r=0.814 and 0.490,both P<0.05).The 3D group had a shorter operative time(157.02±8.38 vs 183.16±23.87),less intraoperative blood loss(83.65±14.22 vs 110.94±22.05),and higher number of lymph node dissections(28.98±2.82 vs 23.56±2.77)and R0 resection rate(80.77%vs 61.64%)than the 2D group.Furthermore,the 3D group had shorter hospital stay[8(8,9)vs 13(14,16)],time to gas passage[3(3,4)vs 4(5,5)],and drainage tube removal time[4(4,5)vs 6(6,7)]than the 2D group.The complication rate was lower in the 3D group(11.54%)than in the 2D group(26.47%)(χ^(2)=4.106,P<0.05).CONCLUSION Using 3D RVT,doctors can gain a more comprehensive and intuitive understanding of the anatomy and related lesions of EGJ carcinomas,thus enabling more accurate surgical planning.

Current trends in three-dimensional visualization and real-time navigation as well as robot-assisted technologies in hepatobiliary surgery

With the continuous development of digital medicine,minimally invasive precision and safety have become the primary development trends in hepatobiliary surgery.Due to the specificity and complexity of hepatobiliary surgery,traditional preoperative imaging techniques such as computed tomography and magnetic resonance imaging cannot meet the need for identification of fine anatomical regions.Imaging-based three-dimensional(3D)reconstruction,virtual simulation of surgery and 3D printing optimize the surgical plan through preoperative assessment,improving the controllability and safety of intraoperative operations,and in difficult-to-reach areas of the posterior and superior liver,assistive robots reproduce the surgeon’s natural movements with stable cameras,reducing natural vibrations.Electromagnetic navigation in abdominal surgery solves the problem of conventional surgery still relying on direct visual observation or preoperative image assessment.We summarize and compare these recent trends in digital medical solutions for the future development and refinement of digital medicine in hepatobiliary surgery.

Three-dimensional visualization of soil pore structure using computed tomography

The geometric and spatial characteristics of pore structures determine the permeability and water retention of soils, which have important effects on soil functional diversity and ecological restoration. Until recently, there have not been tools and methods to visually and quantitatively describe the characteristics of soil pores. To solve this problem, this research reconstructs the geometry and spatial distribution of soil pores by the marching cubes method, texture mapping method and the ray casting method widely used in literature. The objectives were to explore an optimal method for three-dimensional visualization of soil pore structure by comparing the robustness of the three methods on soil CT images with single pore structure and porosity ranging from low (2–5%) to high (12–18%), and to evaluate the reconstruction performance of the three methods with different geometric features. The results demonstrate that there are aliases (jagged edges) and deficiency at the boundaries of the model reconstructed by the marching cubes method and pore volumes are smaller than the ground truth, whereas the results of the texture mapping method lack the details of pore structures. For all the soil images, the ray casting method is preferable since it better preserves the pore characteristics of the ground truth. Furthermore, the ray casting method produced the best soil pore model with higher rendering speed and lower memory consumption. Therefore, the ray casting method provides a more advanced method for visualization of pore structures and provides an optional technique for the study of the transport of moisture and the exchange of air in soil.

Geologic body three-dimensional model generation and visualization method

The divergence three-dimensional millet-seed body model and the continuous distributing layer-imitating model were introduced, which were used to express geologic body, and the procedure of generating these two models and their merits and demerits were synthesized. Three methods of geologic body’s three-dimensional expression were separately introduced, and the merits of the continuous distributing layer imitating model were proposed as comparing with the divergence three-dimensional millet-seed body model. The three-dimensional cubes were observed from any direction and any tangle with the application of dealing methods such as peeling, hollowing out, transparent or half-transparent.

Application of Three-Dimensional Visualization Technology in Project Management of Offshore Platform Engineering Construction

Three-dimensional visualization technology converts engineering design drawings and data into graphics or images, realizes virtual reality perception of simulated users in future construction scene, enhances the interaction between project management and technical personnel and engineering construction achievement, and provides intuitive, flexible and strong realistic experience for project management. It can effectively improve the level of project communication, and assist the needs of project construction planning management, training, exhibition, etc. As a tool to help improve project management skills, it has good application effect and prospects.

In-situ three-dimensional visualization of dynamic tension deformation in ferrite stainless steels

An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.

VISUALIZATION OF THREE-DIMENSIONAL DATA FIELD AND ITS APPLICATION IN MACHINE TESTING

In order to realize visualization of three-dimensional data field （TDDF） in instrument, two methods of visualization of TDDF and the usual manner of quick graphic and image processing are analyzed. And how to use OpenGL technique and the characteristic of analyzed data to construct a TDDF, the ways of reality processing and interactive processing are described. Then the medium geometric element and a related realistic model are constructed by means of the first algorithm. Models obtained for attaching the third dimension in three-dimensional data field are presented. An example for TDDF realization of machine measuring is provided. The analysis of resultant graphic indicates that the three-dimensional graphics built by the method developed is featured by good reality, fast processing and strong interaction

Grid-based computer-generated holograms synthesizing for holographic three-dimensional display

To reduce the computing time of composite computer-generated holograms （CGHs） gen- eration based upon the angular projection algorithm for holographic three-dimensional （3D） display, a grid-based holographic display （ GHD ） scheme was designed. The grid computing technology was applied to numerically process the different angular projections of an object in distributed-parallel manner to create the corresponding CGHs. The whole treatment of a projection was regarded as a job executed on the grid node machine. The number of jobs which were submitted to grid nodes, therefore, was equal to that of the projections of the object. A Condor-based grid testbed was constructed to verify the feasibility of the GHD scheme, and a graphical user interface （GUI） program and several service modules were developed for it. A 3D terrain model as an example was processed on the testbed. The result showed that the scheme was feasible and able to improve the execution elficiency greatly.

Three-dimensional visualization technology for guiding one-step percutaneous transhepatic cholangioscopic lithotripsy for the treatment of complex hepatolithiasis

BACKGROUND Biliary stone disease is a highly prevalent condition and a leading cause of hospitalization worldwide.Hepatolithiasis with associated strictures has high residual and recurrence rates after traditional multisession percutaneous transhepatic cholangioscopic lithotripsy(PTCSL).AIM To study one-step PTCSL using the percutaneous transhepatic one-step biliary fistulation(PTOBF)technique guided by three-dimensional(3D)visualization.METHODS This was a retrospective,single-center study analyzing,140 patients who,between October 2016 and October 2023,underwent one-step PTCSL for hepatolithiasis.The patients were divided into two groups:The 3D-PTOBF group and the PTOBF group.Stone clearance on choledochoscopy,complications,and long-term clearance and recurrence rates were assessed.RESULTS Age,total bilirubin,direct bilirubin,Child-Pugh class,and stone location were similar between the 2 groups,but there was a significant difference in bile duct strictures,with biliary strictures more common in the 3D-PTOBF group(P=0.001).The median follow-up time was 55.0(55.0,512.0)days.The immediate stone clearance ratio(88.6%vs 27.1%,P=0.000)and stricture resolution ratio(97.1%vs 78.6%,P=0.001)in the 3D-PTOBF group were significantly greater than those in the PTOBF group.Postoperative complication(8.6%vs 41.4%,P=0.000)and stone recurrence rates(7.1%vs 38.6%,P=0.000)were significantly lower in the 3D-PTOBF group.CONCLUSION Three-dimensional visualization helps make one-step PTCSL a safe,effective,and promising treatment for patients with complicated primary hepatolithiasis.The perioperative and long-term outcomes are satisfactory for patients with complicated primary hepatolithiasis.This minimally invasive method has the potential to be used as a substitute for hepatobiliary surgery.

Association between tear film break up time and blink interval in visual display terminal users

AIM：To investigate the association between tear film break up time（TBUT）and blinking interval in visual display terminal（VDT）users.METHODS：Nine hundred and thirty VDT users underwent dry eye testing,and functional visual acuity（FVA）test.The blinking interval during FVA was compared with TBUT.Subjects with longer blinking interval than TBUT were considered as unstable tear film.Logistic regression analysis revealed the risk factors for unstable tear group.RESULTS：Among 930 workers,858 subjects（92.3%）participated in this study.Almost 80% of the subjects were categorized into the unstable tear group.Unstable tear group has significantly lower Schirmer values and TBUT（17.5±11.6 vs 21.1±11.5 mm,3.7±2.6 vs 5.7±2.7s,both P〈0.001）.There were no significant differences in epithelial staining or severity of symptoms.Logistic regression showed that over 40y was a risk for being unstable tear group[odds ratio（OR）=1.53;95%confidence interval（CI）=1.06-2.20].Contact lens use was protective factor for being in the unstable tear group（OR=0.37;95%CI=0.26-0.53）.CONCLUSION：Subjects with shorter TBUT than blinking interval are prevalent among VDT users.Subjects over the age of 40 shows an increased risk for unstable tear film.

A visualization pipeline for in vivo two-photon volumetric astrocytic calcium imaging

Astrocytes,the multi-functional glial cells with the most abundant population in the brain,integrate information across their territories to regulate neuronal synaptic and cerebrovascular activities.Astrocytic calcium(Ca^(2+))signaling is the major readout of cellular functional state of astrocytes.The conventional two-photon in vivo imaging usually focuses on a single horizontal focal plane to capture the astrocytic Ca^(2+)signals,which leaves>80%spatial information undetected.To fully probe the Ca^(2+)activity across the whole astrocytic territory,we developed a pipeline for imaging and visualizing volumetric astrocytic Ca^(2+)time-lapse images.With the pipeline,we discovered a new signal distribution pattern from three-dimensional(3D)astrocytic Ca^(2+)imaging data of mice under isoflurane anesthetic states.The tools developed in this study enable a better understanding of the spatiotemporal patterns of astrocytic activity in 3D space.

Light Emitting Diodes as a Rapid Visual Display for Use in Psychological Experiments

In this paper we show how light emitting diodes (LEDs) can be used in conjunction with existing display technologies as a means for achieving ultra-rapid visual stimulus exposure durations. We review existing rapid visual display methods, and show how our apparatus overcomes the limitations inherent with each technique. Our apparatus, the LED tachistoscope, takes advantage of the fast-switching times and high-brightness capabilities of LEDs in order to present stimuli at previously unachievable durations as rapid as 1 ms. The rapid exposure durations are achieved by external LED backlight illumination of images on a liquid crystal display (LCD) after the components of the LCD have stabilized. This ensures that stimulus onset and offset are discrete. Furthermore, the fast-switching of the LEDs enables stimuli to be revealed for very rapid durations. The paper also describes studies in which the LED tachistoscope has already been applied, and offers suggestions for other possible applications. Interestingly, in our studies we show that the human visual system is very adept at extracting information with only very minimal stimulus exposure durations. Such studies have not been possible with existing display equipment. The LED tachistoscope opens up avenues for a variety of psychological and physiological experiments and provides a means for revealing the limits of human visual perception.

High-elevation Adaptation of Motion Visual Display Modifications in the Toad-Headed Agamid Lizards(Phrynocephalus)

Understanding the process of adaptation is a key mission in modern evolutionary biology.Animals living at high elevations face challenges in energy meta bolism due to several environmental constraints(e.g., oxygen supply, food availa bility,and movement time). Animal behavioral processes are intimately related to energy meta bolism, and therefore, behavioral modifica tions are expected to be an important mechanism for high-elevation adaptation. We tested this behavioral adaptation hypothesis using va ria tions of motion visual displays in toad-headed agamid lizards of the genus Phr ynocephalus. We predicted tha t complexity of visual motion displays would decrease with the increase of elevation, because motion visual displays are energetically costly. Displays of 12 Phr ynocephalus species were collected with elevations ranging from sea level to 4600 m. We quantified display complexity using the number of display components, display duration, pathways of display components, as well as display speed for each species. Association between display complexity and elevation was analyzed using the phylogenetic generalized least squares(PGLS)model. We found that both the number of display components and the average value of tail coil speed were negatively correlated with elevation, suggesting that toad-headed lizards living at high-elevation areas reduced their display complexity to cope with the environmental constraints. Our research provides direct evidence for high-elevation adaptation from a behavioral aspect and illustrates the potential impacts of environment heterogeneity on motion visual display diversification.

AN APPLICATION OF TOPOLOGICAL METHOD TO ANALYSING THE THREE-DIMENSIONAL FLOW IN CASCADES(Ⅱ)-TOPOLOGICAL ANALYSIS ON THE VECTOR FIELD PATTERNS OF SKINFRICTIONS AND SECTION STREAMLINES

With an application of topological analysis, in this paper the skin-friction line patterns on compressor and turbine cascade surfaces are depicted and the streamline patterns of the secondary flow fields in the cross-section of a curved pipe and a turbine cascade are drawn under given conditions. In addition the structures of vortices within three-dimensional viscous flow fields in cascades are analysed.

Psychological and physiological effects of stereoscopic movies of real-world scenes containing improper three-dimensional settings

By using psychological and physiological indicators, the effects on the body of three-dimensional (3D) movies containing improper settings were evaluated with 139 university students. The experiment consisted of two sessions: 1) a 3D movie containing improper 3D settings was compared with a 2D movie containing only the rightside images presented to both eyes, and 2) the original 3D movie was compared with the same 3D movie altered to contain improper 3D settings. The results of this experiment demonstrated clear deterioration of the subjective psychological indicators (degree of motion sickness after watching the movies and comfort level at 1-min intervals during the movie) with respect to the 3D movie containing improper settings. On the other hand, the physiological indicators (LF/HF ratio indicating the status of the autonomic nervous system) changed as a result of watching a 3D movie, but were unaffected by the presence or absence of improper 3D settings.

Combining robot-assisted surgical system and 3D visualization system for teaching minimally invasive vitreoretinal surgery

AIM:To investigate the feasibility of teaching minimally invasive vitreoretinal surgery with a robot-assisted surgical system and a three-dimensional(3D) visualization system.METHODS:Enucleated porcine eyes were established as an animal model for removing foreign bodies.Forty medical students were recruited to remove foreign bodies to compare the traditional microscope and the 3D system.One junior resident performed the surgical task with manual and robot-assisted operations on 20 porcine eyes for each group.One senior surgeon evaluated the retinal invasion by a graded injury degree.The learning curve for minimally invasive vitreoretinal surgery was described.RESULTS:Compared with the robot-assisted group,the injury degree was higher in the manual group.For the first ten surgeries,the manual and robot-assisted groups had injuries of 2.60±1.35(4 to 0) and 1.80±1.62(4 to 0),respectively.For the last ten surgeries,the injury degrees were 1.90±1.20(3 to 0) and 0.80±0.42(1 to 0).Considering the manual and robot-assisted groups together,95%,75% and 60% of the students considered surgical manipulation with the 3D visualization system to be more comfortable,easier and clearer,respectively.CONCLUSION:The robot-assisted surgical system and 3D visualization system may have value in teaching minimally invasive vitreoretinal surgery.

EXTREMELY LOW FREQUENCY MAGNETIC FIELD SUSCEPTIBILITY OF VISUAL DISPLAY UNITS

Extremely low frequency (ELF) magnetic field susceptibility is an index of visual display unit (VDU) quality and performance. This paper provided field measured data on the susceptibility for a large variety of VDUs. A test rig was built to study the susceptibility of VDUs to magnetic fields at fundamental and third harmonic frequencies. It was found that the susceptibility level is largely dependent on refresh rate of the VDU and the orientation of the external ELF field. It was also found that the VDU susceptibility is significantly increased in the presence of harmonic frequency magnetic fields. About 30% of the tested samples have susceptibility levels higher than that stated in IEC 1000-4-8 standard.

The Efficiency of the Moire Technique for Three-Dimensional Measures of Grape Bunches

This study was carried out in the University of Campinas to study the three-dimensional reconstruction of grape bunches through the application of the Moire technique as an alternative and innovative method, using low-cost equipment for data acquisition. This study proposed the three-dimensional visualization of grapes and topography on Xi axes through the Moire projection technique. The artificial grapes with a 20 cm long bunch and 18.45 mm average diameter for each grape were used. A projector was used to generate a grid with light and dark lines. The grape bunch was placed on a holder, illuminated by a sinusoidal grid and photographed. After processing the images, a three-dimensional map of the fruit and topography on Xi axes were obtained. The three-dimensional fruit observation allows the visualization of the higher and lower regions of the three-dimensional configuration through a color map. This result makes it possible to obtain size and shape of the grape bunch, allowing for the process automation of product selection and classification.

Topological approach of liver segmentation based on 3D visualization technology in surgical planning for split liver transplantation

BACKGROUND Split liver transplantation(SLT)is a complex procedure.The left-lateral and right tri-segment splits are the most common surgical approaches and are based on the Couinaud liver segmentation theory.Notably,the liver surface following right trisegment splits may exhibit different degrees of ischemic changes related to the destruction of the local portal vein blood flow topology.There is currently no consensus on preoperative evaluation and predictive strategy for hepatic segmental necrosis after SLT.AIM To investigate the application of the topological approach in liver segmentation based on 3D visualization technology in the surgical planning of SLT.METHODS Clinical data of 10 recipients and 5 donors who underwent SLT at Shenzhen Third People’s Hospital from January 2020 to January 2021 were retrospectively analyzed.Before surgery,all the donors were subjected to 3D modeling and evaluation.Based on the 3D-reconstructed models,the liver splitting procedure was simulated using the liver segmentation system described by Couinaud and a blood flow topology liver segmentation(BFTLS)method.In addition,the volume of the liver was also quantified.Statistical indexes mainly included the hepatic vasculature and expected volume of split grafts evaluated by 3D models,the actual liver volume,and the ischemia state of the hepatic segments during the actual surgery.RESULTS Among the 5 cases of split liver surgery,the liver was split into a left-lateral segment and right trisegment in 4 cases,while 1 case was split using the left and right half liver splitting.All operations were successfully implemented according to the preoperative plan.According to Couinaud liver segmentation system and BFTLS methods,the volume of the left lateral segment was 359.00±101.57 mL and 367.75±99.73 mL,respectively,while that measured during the actual surgery was 397.50±37.97 mL.The volume of segment IV(the portion of ischemic liver lobes)allocated to the right tri-segment was 136.31±86.10 mL,as determined using the topological approach to liver segmentation.However,during the actual surgical intervention,ischemia of the right tri-segment section was observed in 4 cases,including 1 case of necrosis and bile leakage,with an ischemic liver volume of 238.7 mL.CONCLUSION 3D visualization technology can guide the preoperative planning of SLT and improve accuracy during the intervention.The simulated operation based on 3D visualization of blood flow topology may be useful to predict the degree of ischemia in the liver segment and provide a reference for determining whether the ischemic liver tissue should be removed during the surgery.

Researches on Cartographic Database-Based Interactive Three-Dimensional Topographic Map

With the development of computer graphics, the three-dimensional (3D) visualization brings new technological revolution to the traditional cartography. Therefore, the topographic 3D-map emerges to adapt to this technological revolution, and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage. The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology, so the research and development of topographic 3D-map will receive greater concern. The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model (DEM) and 3D-models of other DEM-based geographic features. In view of the potential enormous data and the complexity of geographic features, the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis. In addition to the equipment of hardware that are restraining, to a certain extent, the 3D representation, the data organization structure of geographic information will be the core problem of research on 3D-map. Level of detail (LOD), space partitioning, dynamic object loading (DOL) and object culling are core technologies of the dynamic 3D representation. The object- selection, attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system, all of which are based on the data structure of the 3D-model. This paper discusses the basic theories, concepts and cardinal principles of topographic 3D-map, expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD, space partitioning, DOL and object culling. Moreover, such interactive operation functions are explored, in this paper, as spatial query, scene editing and management of topographic 3D-map. Finally, this paper describes briefly the applications of topographic 3D-map in its related fields.