THREE-PHASE BRIDGE INVERTER FOR 9kW DOUBLY SALIENT PERMANENT MAGNET MOTOR

The three-phase bridge inverter is used as the converter topology in the power controller for a 9 kW doubly salient permanent magnet （DSPM） motor. Compared with common three-phase bridge inverters, the proposed inverter works under more complicated conditions with different principles for special winding back EMFs, position signals of hall sensors, and the given mode of switches. The ideal steady driving principles of the inverter for the motor are given. The working state with asymmetric winding back EMFs, inaccurate position signals of hall sensors, and the changing input voltage is analyzed. Finally, experimental results vertify that the given anal ysis is correct.

Symmetrical dynamical characteristic of peak and valley current-mode controlled single-phase H-bridge inverter

Complex dynamical phenomenon was studied in the single phase H-bridge inverter which was controlled by either a peak current or a valley current. The state functions and the discrete iterative map equations were established to analyze the dynamical phenomenon in the single phase H-bridge inverter. The dynamical characteristics of the single phase H- bridge inverter, such as time domain waveform diagram, bifurcation diagram, and folding map, were obtained by using the numerical calculation when the circuit parameters varied in specific range. Moreover, the simulation results were obtained by using the OrCAD-PSpice software to validate the numerical calculation. Both the numerical calculation and the circuit simulation show that the symmetrical dynamical phenomenon occurs in the single phase H-bridge inverter controlled by the peak current or the valley current.

Research of Mining STATCOM Based on Hybrid Multilevel H-bridge Inverter

The paper presents a new STATCOM system based on H-bridge inverter. It can be used in mine power network. It has been commonly verified for the positive effects of SVG on the reactive power compensation and voltage fluctuation suppression. This paper focuses on a generalized structure of multilevel power converter where individual voltage sources are not necessarily the same. The cascade H-bridge consists of two cells, high-voltage cell and low-voltage cell. The high-voltage cell is responsible for voltage lifting, while the low-voltage cell is responsible for PWM modulation. If two cells are cascaded with DC voltages in a ratio of 2:1, the single-phase output voltage can reach 7 levels. Increasing voltage levels of output waveform can bring up AC current quality, optimize harmonic spectrum and enhance converter efficiency. The hybrid multilevel is characterized by per-phase series connection of a high-voltage H-bridge converter and a low-voltage H-bridge converter. Due to the different capacitor voltage, it is a key problem as to how to maintain the capacitor’s voltage at a reference level. Independent DC source can effectively ensure the DC voltage. Through the reactive power compensation technology, the three-phase voltage and current can remain at the same phase.

THD Analysis of Cascaded H-Bridge Inverter with Fuzzy Logic Controller

In recent days, the multilevel inverter technology is widely applied to domestic and industrial applications for medium voltage conversion. But, the power quality issues of the multilevel inverter limit the usage of much sensitive equipment like medical instruments. The lower distortion level of the output voltage and current can generate a quality sinusoidal output voltage in inverters and they can be used for many applications. The harmonics can cause major problems in equipments due to the nonlinear loads connected with the power system. So, it is necessary to minimize the losses to raise its overall efficiency. In this paper, a new topology of seven level asymmetrical cascaded H-bridge multilevel inverter with a Fuzzy logic controller had been implemented to reduce the Total Harmonic Distortion (THD) and to improve the overall performance of the inverter. The proposed model is well suited for use with a solar PV application. In this topology, only six IGBT switches are used with three different voltage ratings of PV modules (1:2:4). The lower number of semiconductor switches leads to minimizing overall di/dt ratings and voltage stress on each switches and switching losses. The gate pulses generated by Sinusoidal Pulse Width Modulation (SPWM) technique with a Fuzzy logic controller are also introduced. A buck-boost converter is used to maintain the constant PV voltage level integrated by an MPPT technique followed by Perturb and Observer algorithm is also implemented. The MPPT is used to harness the maximum power of solar radiations under its various climatic conditions. The new topology is evaluated by a Matlab/Simulink model and compared with a hardware model. The results proved that the THD achieved by this topology is 1.66% and realized that it meets the IEEE harmonic standards.

Capacitor Pattern H-Bridge Multilevel Inverter (CPHMLI) Using Phase Diposition Pulse Width Modulation for Grid Applications

This work presents an implementation of an innovative single phase multilevel inverter using capacitors with reduced switches. The proposed Capacitor pattern H-bridge Multilevel Inverter (CPHMLI) topology consists of a proper number of Capacitor connected with switches and power sources. The advanced switching control supplied by Pulse Width Modulation (PDPWM) to attain mixed staircase switching state. The charging and discharging mode are achieved by calculating the voltage error at the load. Furthermore, to accomplish the higher voltage levels at the output with less number of semiconductors switches and simple commutation designed using CPHMLI topology. To prove the performance and effectiveness of the proposed approach, a set of experiments performed under various load conditions using MATLAB tool.

基于光储混合配置的级联H桥型光伏逆变器功率平衡策略

级联H桥(cascade H-bridge,CHB)变换器由于其模块化结构,已成为大规模光伏(photovoltaic,PV)并网逆变器的优选方案。然而,在不同光照强度和温度下,不同区域PV组件之间发电功率不同,导致CHB变换器相间输出功率不均衡、不稳定等问题。为此,文中提出一种基于CHB结构的光储混合电能路由,在三相CHB光伏逆变器中配置少量的储能模块,利用光储协同控制,维持CHB内部功率稳定,消除分布式PV在相间产生的不均衡功率,且变换器输出功率能够时刻满足网侧上层功率调度,提高了光伏电站的稳定性。针对系统安全区域,在载波移相调制策略下,全桥子模块传输的功率受到约束,并对光伏和储能模块的配置作详细分析。最后,通过仿真以及实验验证所提拓扑及控制策略的正确性和有效性。

CPS-SPWM级联H桥激励的变压器铁耗快速计算方法

针对载波移相(CPS)正弦脉宽调制(SPWM)级联H桥激励的变压器,提出一种基于经典损耗分离模型的铁耗快速计算方法.首先,结合SPWM电压波形特征定义集总占空比,并推导其关于调制比的解析模型;其次,基于经典损耗分离模型和集总占空比,构建CPS-SPWM级联H桥的铁耗计算模型,该方法可以直接使用调制比、直流母线电压等参数对铁耗进行计算,从而避免传统方法中的谐波分析或者数值积分过程;再次,基于本文铁耗计算模型,提出了一种针对SPWM电压激励的有限元(FEM)仿真等效方法,最后,通过实验验证了本文计算方法的有效性.研究结果表明:等效仿真铁耗误差小于3.6%、仿真用时减少74.5%;最大铁耗计算误差为7.6%.

多电平级联H桥逆变器通用型离散模型及分岔与混沌行为特性分析

多电平级联H桥逆变器内部功率器件多、等效开关频率高、开关组合状态繁杂、离散数学模型建立难度大,其分岔、混沌动力学行为难以进行系统性分析。基于虚拟遍历法建立了具有N个单元的多电平级联H桥逆变器通用型离散映射数学模型;引入对交流变量跟踪性能更佳的准比例谐振控制器,并重点分析了比例增益、谐振增益、单元数量N变化以及主电路和控制电路中其他参数变化情况下的分岔、混沌行为特性;对比分析了引入混沌抑制前后系统稳定性变化情况。从方法论角度分别采用根轨迹图和折叠图验证了稳定性分析结果的正确性,并通过PSIM仿真和实验验证了相关结论的正确性和抑制分岔与混沌行为的有效性。

低电容CHB型混合动力中压电机调速系统

针对氢燃料电池大功率电机驱动系统,提出一种以燃料电池为主动力源的轻量化级联H桥(cascadedH-bridge,CHB)型混合动力中压电机调速系统。所提系统由燃料电池/蓄电池/超级电容的混合动力源供电,基于四有源桥(quad activebridge,QAB)与CHB子模块互联的两级变换器(cascaded H-bridges with quad active bridge,CHB-QAB)作为调速变换器。CHB-QAB通过四绕组高频变压器将各子模块进行内部互联,采用单边同步双边移相调制的策略,使得所有子模块呈现开关电容特性,在不依赖复杂控制的前提下,减小子模块电容的容值,提升系统的功率密度。针对三类动力源,采用基于低通滤波(lowpassfilter,LPF)的能量管理策略,保证电机实际运行过程中的有效功率分配,解决燃料电池对电机动态响应缓慢和燃料饥饿现象等问题。最后通过仿真与实验对所提轻量化电机调速系统进行验证。

基于自抗扰控制的H桥逆变器的混沌研究

为了解决新能源发电系统逆变器出现混沌的问题,提出了一种基于自抗扰控制的H桥逆变器的调节方案。针对处于混沌状态的逆变器的稳态和动态特性差的现象,构建了逆变器的离散模型,并通过建立跟踪微分器、扩张状态观测器以及状态误差反馈控制律进行混沌控制。通过分岔图、折叠图以及仿真分析,结果可知基于自抗扰控制的H桥逆变器比基于比例控制的H桥逆变器的稳定范围扩大了45%,有效地抑制了混沌现象的发生。通过分析可得出:该控制策略对系统的混沌行为能够进行抑制,拓宽了系统稳定工作范围。

无功补偿与储能集成系统中H桥级联型功率变换器相内SoC快速均衡

无功补偿与储能集成系统应用于风、光电站具有经济性,其中H桥级联型功率变换器具有低功率因数运行特点,提升其相内SoC均衡速度有助于提升电池安全和储能系统容量利用率。在调制约束下,考虑相内SoC均衡中电压无功分量的叠加,分析不同功率因数时功率单元的SoC均衡能力。基于分析,提出相内SoC的快速均衡方法,设计均衡控制电压有功分量叠加方法,充分利用功率单元的SoC均衡能力。基于各功率单元叠加的电压有功分量设计相应单元的无功分量叠加方法,提升功率单元的SoC均衡能力。仿真分析验证了相内SoC快速均衡控制的有效性。

基于混沌的H桥逆变器的非奇异终端滑膜控制

针对逆变器的分岔和混沌现象,建立逆变器的离散模型,通过分岔图、Lyapunov指数和折叠图分析非线性行为,并计算出系统的稳定运行范围及混沌运行范围。文中提出一种非奇异终端滑膜控制策略,设计切换面函数,推导逆变器的反馈控制律。最后进行仿真,仿真结果表明:非奇异滑膜控制能够有效抑制系统的混沌行为,从而拓宽了系统稳定工作范围,相比于比例积分控制(proportional integral derivative,PI),稳定范围扩大了80%。由此可以使得逆变器实现稳定工作,有很强的实际应用价值。

混合级联H桥逆变器的新型SHEPWM功率均衡控制策略

对于直流侧电压比为1∶1∶2的混合级联H桥逆变器,传统的指定谐波消除脉宽调制法(SHEPWM)存在各单元间输出功率不均衡问题,因此,提出一种双层功率均衡调制策略。首先,通过对消谐方程组中的基波幅值方程表达式进行等效拆分,使2个低压H桥单元的输出电压基波幅值之和与高压H桥单元的输出电压基波幅值相等,实现了高低压H桥单元间的功率均衡,即外层功率均衡。其次,利用逻辑运算的方法对低压单元的初始驱动信号进行逻辑重组,实现2个低压单元间的功率均衡,即内层功率均衡;然后使用改进的实数型遗传算法(IRCGA-2)求出消谐方程组的解,消除指定的谐波,得到高质量的输出电压。最后,通过仿真和实验证明了调制策略的正确性与有效性。

单相级联H桥整流器平方电压反馈控制算法

以单相级联H桥整流器为研究对象,对其控制策略进行了研究。首先在采用双闭环控制策略的基础上,构建了dq前馈解耦模型,并通过二阶广义积分算法改善了虚拟交流分量对系统的影响,实现了网侧电流对电压相位、频率的快速精确追踪。其次,对传统电压平衡控制算法进行了改进,通过对功率平衡关系的定义,将输出电压平方作为控制信号,增强了系统自适应能力,提高了系统在投切载时的动态性能。最后,基于MATLAB/Simulink软件进行仿真,验证了所提策略的正确性和有效性。

悬浮电容H桥级联七电平逆变器的混合载波频率调制策略

多电平逆变器具有输出电压谐波含量少、开关器件电压应力低、等效开关频率高等优点,广泛应用于新能源发电场合。悬浮电容H桥级联七电平逆变器,因开关频率低、器件数量少、输出电平数量多得到广泛的关注。为了降低损耗,使H桥逆变单元开关管以低开关频率动作,悬浮电容逆变单元开关管以高开关频率动作,但是会引起过调制和悬浮电容电压失控的问题。为解决过调制问题,该文提出基于调制波分解的混合载波频率调制策略,增加过调制区间的调制过程,分解悬浮电容逆变单元超出载波部分的调制波,使H桥逆变单元开关管以低开关频率运行;同时提出基于工作模式切换的有功功率分解控制,详细分析两种工作模式下的稳压控制原理,根据电容电压的状态改变悬浮电容逆变单元有功功率大小,实现不同工况下悬浮电容电压均衡。最后通过仿真和实验验证了所提调制策略的正确性。

一种基于Si/SiC级联H桥逆变器的高性能模型预测控制方法

Si/SiC级联H桥逆变器,能够利用不同器件的开关组合保证低输出电流谐波畸变率(Total Harmonic Distortion,THD)和装置效率,但也带来了Si/SiC子模块开关分配的难题.对此,本论文设计一种变权重的模型预测控制方法(Model Predictive Control,MPC)选择总开关状态并分配子模块开关组合.该方法在选取逆变器总开关状态和Si/SiC子模块开关组合的代价函数中引入基于器件开关损耗的变权重,以改善逆变器的效率和输出电流谐波畸变率.在五电平Si/SiC级联H桥逆变装置上验证了变权重MPC的有效性,相比于固定权重MPC,输出电流THD最多降低2.05%,装置损耗最多降低4.53%.

相间短路故障条件下级联H桥光伏逆变器的有功功率回流抑制策略

针对现有零序电压补偿策略无法有效抑制级联H桥光伏并网逆变器在电网不对称故障期间存在有功功率回流的问题,定量分析现有零序电压补偿策略的局限性,提出一种正负序最大最小值谐波零序电压注入控制策略,该策略能有效缩小过调制区域,扩大级联H桥型光伏并网逆变器在相间短路故障条件下的运行范围。实验结果验证了所提出控制策略的有效性和可行性。

基于改进GA优化的级联H桥APF神经网络电流跟踪控制

针对基于级联H桥有源滤波器实现谐波抑制时,传统PI控制电流跟踪的抗扰性差以及由于神经网络预测的局域最优造成的电流跟踪预测不准确、延迟大等问题。本文提出了一种改进GA优化的级联H桥APF神经网络电流跟踪控制策略,以改进选择和交叉操作的GA优化神经网络变化因子,提升了预测控制的全局搜索能力和鲁棒性能。仿真验证表明,所提出的控制策略相较于传统PI控制,提升了电流跟踪控制的鲁棒性;相较基于传统GA优化的神经网络控制方法,本文提出的方法跟踪速度提升了约0.04 s,控制误差减小约0.2 A,谐波畸变率降低0.36%。可见,响应速度和控制精度更优,具有更好的跟踪控制能力。