Motion control of thrust system for shield tunneling machine

The thrust hydraulic system of the prototype shield machine with pressure and flow compound control scheme was introduced. The experimental system integrated with proportional valves for study was designed. Dynamics modeling of multi-cylinder thrust system and synchronous control design were accomplished. The simulation of the synchronization motion control system was completed in AMESim and Matlab/Simulink software environments. The experiment was conducted by means of master/slave PID with dead band compensating flow and conventional PID regulating pressure. The experimental results show that the proposed thrust hydraulic system and its control strategy can meet the requirements of tunneling in motion and posture control for the shield machine, keeping the non-synchronous error within ±3 mm.

Late Cenozoic Deformation Sequence of a Thrust System along the Eastern Margin of Pamir,Northwest China

A thrust belt formed in the basin along the eastern margin of Pamir.The thrust belt is about 50 km wide,extends about 200 km,and includes three compressive structures from south to north：the blind Qipan structural wedge and Qimugen structural wedge,and the exposed Yengisar anticline.The thrust belt displays a right-stepping en echelon pattern.The Qipan structural wedge dies out northward to the west of the Qimugen structural wedge,and the Qimugen structural wedge dies out northward to the west of the Yengisar anticline.Detailed analysis of seismic reflection profiles of the western Tarim Basin reveal that fan-shaped growth strata were deposited in the shallow part of the thrust belt,recording the deformation sequence of the thrust belt.The depth of the Cenozoic growth strata decreases from south to north.The growth strata of the Qipan structural wedge is located in the middle-lower section of the Pliocene Artux Formation（N2a）,the growth strata of the Qimugen structural wedge is close to the bottom of the Pleistocene Xiyu Formation（Q1x）,and the growth strata of the Yengisar anticline is located in the middle section of the Xiyu Formation（Q1x）.Combined with magnetostratigraphic studies in the western Tarim basin,it can be preliminarily inferred that the deformation sequence of the thrust belt along the eastern margin of Pamir is progressively younger northward.The geometry and kinematic evolution of the thrust belt in the eastern margin of Pamir can be compared with previous analogue modeling experiments of transpressional deformation,suggesting that the thrust belt was formed in a transpressional tectonic setting.

Structural Characteristics of Sainan Imbricated Thrust System in the North-Fringe Block-Faulting Belt of Qaidam Basin

Sainan imbricated thrust system is a kind of typical nappe structure. Using the method of plot excess area, this paper calculates the detachment depth of this thrust system. The calculating result shows that the detachment depth is about 15 km underground and tbe shorteuiug of the strata is much more than 700 m. Analysis of fault growth indexs and seismic reflection profiles reveals that this thrust system is developed by the mixing propagation, from piggyback propagation to overstep propagation.

Dating long thrust systems on Mercury:New clues on the thermal evolution of the planet

The global tectonics of Mercury is dominated by contractional features mainly represented by lobate scarps,high relief ridges,and wrinkle ridges.These structures are the expression of thrust faults and are linear or arcuate features widely distributed on Mercury.Locally,these structures are arranged in long systems characterized by a preferential orientation and non-random spatial distribution.In this work we identified five thrust systems,generally longer than 1000 km.They were named after the main structure or crater encompassed by the system as:Thakur,Victoria,Villa Lobos,Al-Hamadhani,and Enterprise.In order to gain clues about their formation,we dated them using the buffered crater counting technique,which can be applied to derive the ages of linear landforms such as faults,ridges and channels.To estimate the absolute age for the end of the thrust system's activity,we applied both Le Feuvre and Wieczorek Production Function and Neukum Production Functions.Moreover,to further confirm the results obtained with the buffered crater counting method,the classic stratigraphic approach has been adopted,in which a faulted and an unfaulted craters were dated for each system.The results gave consistent ages and suggested that the most movements along major structures all over Mercury most likely ended at about 3.6-3.8 Ga.This gives new clues to better understand the tectonics of the planet and,therefore,its thermal evolution.Indeed,the early occurrence of tectonic activity in the planet's history,well before than predicted by the thermophysical models,coupled with the orientation and spatial distribution of the thrust systems,suggests that other processes beside global contraction,like mantle downwelling or tidal despinning,could have contributed to the first stage of the planet's history.

Deformation Patterns and Shortening Rates in the East Part of the Kalpin Thrust System in the Southwest Tianshan Mountains During the Late Quaternary

Deformation patterns, shortening amounts and rates in the late Quaternary across the Kalpin thrust system have received little attention in the past. This paper attempts to discuss them, mainly in the eastern part of the thrust system by doing field investigation along the faults and folds, measuring geomorphic deformation, excavating trenches in several important sites where young alluvial fans were obviously displaced and dating young deposits of alluvial terraces. There are two types of deformation in the surface and near surface for the Kalpin thrust system in the late Quaternary. They are movement of thrust faults on lower angles and bending of young folds. Both kinds of deformation are shown by shortening and uplifting of young geomorphic surfaces. The surface ages of 3 stages are calculated by dating 20 examples using the TL method in the study area and comparing the results of our predecessors on the deposition and incision times of alluvial terraces in the Tianshan mountain which are 100ka B.P., 33～18ka B.P. and 6.6～8.2ka B.P. respectively for the large-scale deformed alluvial surfaces: T_3, T_2 and T_1 in the Kalpin region. Then, 19 sets of shortening amounts and rates are obtained in 13 sites along 4 rows of anticlines in front of the Kalpin thrust system and Piqiang fold. The shortening amounts and rates show that there are two sections where deformation is stronger than others. The two sections consist of two arcs that are towards the south. The shortening rates near the top of arcs are 1.32mm/a in the west and 1.39mm/a in the east across the thrust system, respectively. In addition, deformation is stronger in the front rows than the rear ones for bifurcate folds.

Performance investigation of a low-power Hall thruster fed on iodine propellant

The common propellants used for electric thrusters, such as xenon and krypton, are rare, expensive,and difficult to acquire. Solid iodine attracts much attention with the advantages of low cost,extensive availability, low vapor pressure, and ionization potential. The performance of a lowpower iodine-fed Hall thruster matched with a xenon-fed cathode is investigated across a broad range of operation conditions. Regulation of the iodine vapor's mass flow rates is stably achieved by using a temperature control method of the iodine reservoir. The thrust measurements are finished utilizing a thrust target during the tests. Results show that thrust and anode-specific impulse increase approximately linearly with the increasing iodine mass flow rate.At the nominal power of 200 W class, iodine mass flow rates are 0.62 and 0.93 mg/s, thrusts are7.19 and 7.58 m N, anode specific impulses are 1184 and 826 s, anode efficiencies are 20.8%and 14.5%, and thrust to power ratios are 35.9 and 37.9 m N/k W under the conditions of 250 V,0.8 A and 200 V, 1.0 A, respectively. The operating characteristics of iodine-fed Hall thruster are analyzed in different states. Further work on the measurements of plasma characteristics and experimental optimization will be carried out.

Petrogenesis and Tectonic Implications of the Early Triassic Nianzi Adakitic Granite Unit in the Yanshan Fold and Thrust Belt:New Constraints from U-Pb Geochronology and Sr-Nd-Hf Isotopes

The Nianzi granite unit,which includes the Nianzi,Xiaolianghou and Xiawopu granitic intrusions,is a significant component of the northern part of the North China Craton(NCC)and is situated in the Yanshan fold and thrust belt(YFTB).However,there is still debate regarding the tectonic evolutionary history of the YFTB during the late Permian to Triassic period,specifically regarding the timing of subduction and collision between the NCC and the Paleo-Asian Ocean.The Nianzi granite unit exhibits unique petrological,geochronological and geochemical signatures that shed light on the tectonic evolutionary history of the YFTB.This study presents detailed petrology,whole-rock geochemistry,together with Sr-Nd isotopic,zircon U-Pb dating and Lu-Hf isotopic data of the granites within the Nianzi granite unit.Our findings demonstrate that the granites primarily consist of subhedral K-feldspar,plagioclase,quartz,minor biotite and hornblende,with accessory titanite,apatite,magnetite and zircon.Zircon U-Pb dating indicates that the Xiaolianghou granite was emplaced at 247.5±0.62 Ma.Additionally,the adakitic characteristics of the Nianzi,Xiawopu and Xiaolianghou granitic intrusions,such as high Sr and Ba contents and high ratios of Sr/Y and(La/Yb)N,combined with negative Sr-Nd and Lu-Hf isotopes(87Sr/86Sr)i=0.705681–0.7057433,εNd(t)=−21.98 to−20.97,zirconεHf(t)=−20.26 to−9.92,as well as the I-type granite features of high SiO_(2),Na_(2)O and K_(2)O/Na_(2)O ratios,enriched Rb,K,Sr and Ba,along with depleted Th,U,Nb,Ta,P and Ti,suggest that the Nianzi granitic unit was mainly derived from the partial melting of a thickened lower crust containing hydrous,calc-alkaline to high-K calc-alkaline,mafic to intermediate metamorphic rocks.In light of these parameters,we further integrate our data with previous studies and conclude that the Nianzi granitic unit was generated in a post-collisional extensional environment during the Early Triassic.

Thrust Optimization of Flapping Wing via Gradient Descent Technologies

The current work aims at employing a gradient descent algorithm for optimizing the thrust of a flapping wing. An in-house solver has been employed, along with mesh movement methodologies to capture the dynamics of flow around the airfoil. An efficient framework for implementing the coupled solver and optimization in a multicore environment has been implemented for the generation of optimized solutionsmaximizing thrust performance & computational speed.

Solid Rocket Booster Thrust Asynchrony Identification Method for Solid Rocket Bundled Rockets With ESO

The role of the rocket attitude control system is to execute the required maneuvers for guidance and ensure the stability of the rocket's flight attitude. Attitude control technology has always been one of the key technologies for ensuring the success of rocket flights and has been a core topic in carrier rocket technology research. The Gravity-1 solid carrier rocket is the first solid rocket bundled rocket developed by China, adopting a configuration with four boosters and a core stage bundled together. During the actual flight process, the four booster engines are ignited first, and then, in the event of insufficient control force from the boosters, the core stage engine is ignited to participate in control. To address thrust asynchrony during the descent of the four boosters, an Extended State Observer(ESO) is employed in the control scheme for this flight segment. This involves real-time estimation and compensation of attitude parameters during flight, identification of thrust asynchrony among the boosters, and simultaneous determination of whether the core stage engine is ignited to participate in control.Through six degrees of freedom simulation analysis and Y1 flight test validation, this method has been proven to be correct and feasible.

Compliance of hydraulic system and its applications in thrust system design of shield tunneling machine

As the most significant performance, compliance of hydraulic system is defined as the capacity to accommodate the sudden change of the external load. Due to the different requirements of the compliant tasks, the existing method for mechanical systems cannot be used in the analysis and design of the hydraulic system. In this paper, the definition and expression of compliance of hydraulic system are proposed to evaluate the compliance of the hydraulic system operating under sudden change load. Because the unexpected geological conditions during excavation may exert sudden change load to the shield tunneling machine, the compliance theory has found a right application in the thrust hydraulic system. By analyzing the basic operating principle and the commonly used architectures of the thrust hydraulic system, a compliance based thrust hydraulic system design method is presented. Moreover, a tunneling case is investigated in the paper as an example to expound the validation of design procedure. In conclusion, the compliance of the hydraulic system can be served as an evaluation of the capability in conforming to the load impact, giving supports for the design of the thrust hydraulic system of shield tunneling machines.

A novel strategy of smart manipulation by micro-scale oscillatory networks of the reactionary zones for enhanced extreme thrust control of the next-generation solid propulsion systems

The main aim of this research is to get a better knowledge and understanding of the micro-scale oscillatory networks behavior in the solid propellants reactionary zones. Fundamental understanding of the micro-and nano-scale combustion mechanisms is essential to the development and further improvement of the next-generation technologies for extreme control of the solid propellant thrust. Both experiments and theory confirm that the micro-and nano-scale oscillatory networks excitation in the solid propellants reactionary zones is a rather universal phenomenon. In accordance with our concept,the micro-and nano-scale structures form both the fractal and self-organized wave patterns in the solid propellants reactionary zones. Control by the shape, the sizes and spacial orientation of the wave patterns allows manipulate by the energy exchange and release in the reactionary zones. A novel strategy for enhanced extreme thrust control in solid propulsion systems are based on manipulation by selforganization of the micro-and nano-scale oscillatory networks and self-organized patterns formation in the reactionary zones with use of the system of acoustic waves and electro-magnetic fields, generated by special kind of ring-shaped electric discharges along with resonance laser radiation. Application of special kind of the ring-shaped electric discharges demands the minimum expenses of energy and opens prospects for almost inertia-free control by combustion processes. Nano-sized additives will enhance self-organizing and self-synchronization of the micro-and nano-scale oscillatory networks on the nanometer scale. Suggested novel strategy opens the door for completely new ways for enhanced extreme thrust control of the solid propulsion systems.

Early Cretaceous Thrust and Nappe Tectonics in North Qilian Shan,Northern Tibetan Plateau:Evidence from Field Mapping,Geochronology,and Deep Structural Analysis

The North Qilian Shan fold and thrust belt,located at the northern Tibetan Plateau and southern margin of the Hexi Corridor,is a key tectonic unit to decode the formation and expansion of the plateau.Previous studies emphasize the Cenozoic deformation due to the far-field response to the Indo-Asian collision,but the Mesozoic deformations are poorly constrained in this area.We conducted detailed field mapping,structural analysis,geochronology,and structural interpretation of deep seismic reflectional profiling and magnetotelluric(MT)sounding,to address the superposed results of the Mesozoic and Cenozoic deformation.The results recognized the North Qilian thrust and nappe system(NQTS),the root and the frontal belt are the North Qilian thrust(NQT),and the Yumu Shan klippe(YK),respectively.The middle belt is located between the NQT and the YK.Monzonitic granite zircon U-Pb dating from the middle belt yields an age of ca.415 Ma,which is similar to south NQT.The thrusting displacement is estimated at ca.48 km by structural interpretation of deep profiles.The timing is constrained in the early stage of the Early Cretaceous by the formation of simultaneous growth strata.We suggest that the NQTS has resulted from the far-field effect of the Lhasa-Qiangtang collision,and the Yumu Shan is uplifted by the superposed Cenozoic deformation.

Numerical analysis of the static performance of an annular aerostatic gas thrust bearing applied in the cryogenic turbo-expander of the EAST subsystem

The EAST superconducting tokamak, an advanced steady-state plasma physics experimental device, has been built at the Institute of Plasma Physics, Chinese Academy of Sciences. All the toroidal field magnets and poloidal field magnets, made of NbTi/Cu cable-in-conduit conductor, are cooled with forced flow supercritical helium at 3.8 K. The cryogenic system of EAST consists of a 2 kW/4 K helium refrigerator and a helium distribution system for the cooling of coils, structures, thermal shields, bus-lines, etc. The high-speed turbo-expander is an important refrigerating component of the EAST cryogenic system. In the turbo-expander, the axial supporting technology is critical for the smooth operation of the rotor bearing system. In this paper, hydrostatic thrust bearings are designed based on the axial load of the turbo-expander. Thereafter, a computational fluid dynamics-based numerical model of the aerostatic thrust bearing is set up to evaluate the bearing performance. Tilting effect on the pressure distribution and bearing load is analyzed for the thrust beating. Bearing load and stiffness are compared with different static supply pressures. The net force from the thrust bearings can be calculated for different combinations of bearing clearance and supply pressure.

ON THE AXIAL TRANSIENT RESPONSE ANALYSISOF THE SECTOR-SHAPED HYDRODYNAMIC THRUSTBEARING-ROTOR SYSTEM IN A TURBOEXPANDER

A model for the non-linear axial vibrations of the hydrodynamic thrust bearing-rotor system in a turboexpander is described. The axial transient process of the system is investigated. The time-dependent form ofthe Reynolds equation is solved by a finite difference method with successive overrelaxation scheme to obtain the hydrodynamic forces of the sector-shaped thrust bearing (SSTB). Using these forces, the equation of motion is solved by the fourth-order Runge-Kutta method and the Adams method to predict the transient behaviour of the thrust bearing-rotor system (TBRS).Also,the linearized stiffness and damping coefficients of the oil film hydrodynamic SSTB are calculated.The analyses of the axial transient response of the system under both linear and non-linear conditions are performed. The non-linearity of oil film forces can significantly contribute to the axial transient response. Conclusions obtained can be applied for evaluation of the reliability of the TBRS.

Heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in foreland thrust belts: A case study of deep Cretaceous Qingshuihe Formation clastic reservoirs in southern Junggar Basin, NW China

Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.

Method to avoid the structural interference of the thrust system of a shield tunneling machine

Several tunnel malfunctions excavation.of the shield tunneling machine(STM)caused by structural interference have been encountered in actual This paper required is focusing workspaces on providing an effective method to avoid the structural main interference based on making the reachable and the of up the to thrust system match pose each other.The of structure of the thrust mechanism is the analyzed,are and coordinate systems are built describe the and workspace out the the thrust mechanism.Constraint conditions derived and the formulation Meanwhile,model of each constraint condition is carried to facilitate analysis of the reachable on workspace analysis of thrust The mechanism.a reachable workspace determination workspace algorithm is introduced based interval based method.mathematical for determining the required of the thrust mechanism is presented on the analysis these of the process by when the STM excavates along a the specific tunnel axis.Two and applications the are included to show how to avoid problems based choosing reasonable matching.parameters of designed tunnel axis key structural parameters of the thrust mechanism on

Study of beam divergence and thrust vector eccentricity characteristics of the Hall thruster based on dual Faraday probe array planes and its applications

The accurate knowledge of the thrust vector eccentricity and beam divergence characteristics of Hall thrusters are of significant engineering value for the beneficial integration and successful application of Hall thrusters on spacecraft.For the characteristics of the plume bipolar diffusion due to the annular discharge channel of the Hall thruster,a Gaussian-fitted method for thrust vector deviation angle and beam divergence of Hall thrusters based on dual Faraday probe array planes was proposed in respect of the Hall thruster beam characteristics.The results show that the ratios of the deviation between the maximum and minimum values of the beam divergence angle and the thrust vector eccentricity angle using a Gaussian fit to the optimized Faraday probe dual plane to the mean value are 1.4%and 11.5%,respectively.The optimized thrust vector eccentricity angle obtained has been substantially improved,by approximately 20%.The beam divergence angle calculated using a Gaussian fitting to the optimized Faraday probe dual plane is approximately identical to the non-optimized one.The beam divergence and thrust vector eccentricity angles for different anode mass flow rates were obtained by averaging the beam divergence and thrust vector eccentricity angles calculated by the dual-plane,Gaussian-fitted ion current density method for different cross-sections.The study not only allows for an immediate and effective tool for determining the design of thrust vector adjustment mechanisms of spacecraft with different power Hall thrusters but also for characterizing the 3D spatial distribution of the Hall thruster plume.

Method of SLAS’s ground track manipulation based on tangential impulse thrust

Satellites with altitudes below 400 km are called super low altitude satellites(SLAS),often used to achieve responsive imaging tasks.Therefore,it is important for the manipulation of its ground track.Aiming at the problem of ground track manipulation of SLAS,a control method based on tangential impulse thrust is proposed.First,the equation of the longitude difference between SLAS and the target point on the target latitude is derived based on Gauss’s variational equations.On this basis,the influence of the tangential impulse thrust on the ground track’s longitude is derived.Finally,the method for ground track manipulation of SLAS under the tangential impulse thrust is proposed.The simulation results verify the effective-ness of the method,after manipulation,the satellite can visit the target point and revisit it for multiple days.

Winding Function Theory Based Thrust Calculation on Nested-loop Secondary Linear Machine Adapted to Linear Metro

With advantages of strong drive capability,nested-loop secondary linear machine(NLS-LM)has great potentiality in linear metro.For its secondary structure with multiple loops,it is difficult to calculate the electromagnetic thrust of NLS-LM reasonably.Hence,in this paper,one thrust calculation method is proposed considering variable loop inductance and transient loop current.Firstly,to establish the secondary winding function,the modeling domain is confined to a limited range,and the equivalent loop span is employed by analyzing the coupling relationship between primary and secondary.Then,in order to obtain the secondary flux density,the transient secondary current is solved based on the loop impedance and induced voltage.Finally,the electromagnetic thrust can be calculated reasonably by the given primary current sheet and the calculated secondary flux density.Comprehensive simulations and experiments have demonstrated the effectiveness of the proposed method.