Flume Experiment Investigation on Propagation Characteristics of Tidal Bore in A Curved Channel

Tidal bore is a special and intensive form of flow movement induced by tidal effect in estuary areas, which has complex characteristics of profile, propagation and flow velocity. Although it has been widely studied for the generation mechanism, propagation features and influencing factors, the curved channel will complicate the characteristics of tidal bore propagation, which need further investigation compared with straight channel. In this study, the flume experiments for both undular and breaking bores’ propagation in curved channel are performed to measure the freesurface elevation and flow velocity by ultrasonic sensors and ADV respectively. The propagation characteristics,including tidal bore height, cross-section surface gradient, tidal bore propagation celerity, and flow velocity are obtained for both sides of the curved channel. And three bore intensities are set for each type of tidal bores. The freesurface gradients are consistently enlarged in high-curvature section for undular and breaking bores, but have distinct behaviors in low-curvature section. The spatial distributions of tidal bore propagation celerity and flow velocity are compared between concave and convex banks. This work will provide experimental reference for engineering design of beach and seawall protection, erosion reduction and siltation promotion in estuary areas with the existence of tidal bores.

Tidal Bore Dynamics Around the Similar Right-Angle Shoreline in the Qiantang Estuary,China

Tidal bores are a unique hydrodynamic phenomenon during flood tide in the Qiantang Estuary.The tidal bore propagation around the similar right-angle shoreline is rarely documented in tidal estuaries.To investigate tidal bores around this shoreline,a hydrodynamic model combined with a theoretical method is employed to reveal the characteristics of the bore propagation.The theoretical solution of the tidal bore intensity is deduced to illustrate the relationship of the incident tidal bores and the back-flow bores during the propagation.The hydrodynamic model based on shallow water equation is employed to perform the simulation of tidal bores in the estuary.Model results with respect to the bore height and the propagation speed of tidal bores have a favourable agreement with field data.The tidal bore dynamics in the neighborhood of the similar right-angle shoreline are elucidated.The characteristics of tidal bores in terms of water surface,velocity,bore steepness and the intensity are illustrated and the back-flow bore is analyzed by numerical and theoretical methods around the similar right-angle shoreline.The height of the back-flow bore relative to the incident tidal bore ranges from 1.05 to 1.77.Model result reveals that the ambient water depth and the shape of the similar right-angle shoreline are contributed to the back-flow bore formation.

Experimental hydrodynamic study of the Qiantang River tidal bore

To study the hydrodynamics of tidal bore, a physical modeling study is carried out in a rectangular flume with considera- tions of the tidal bore heights, the propagation speeds, the tidal current velocities, the front steepness, and the bore shapes. After the validation with the field observations, the experimental results are analyzed, and it is shown that： （1） the greater initial ebb velocity or the larger initial water depth impedes the tidal bore propagation, （2） the maximum bore height appears at an initial ebb velocity in the range of 0.5 m/s-l.5 m/s. （3） when the Froude number exceeds 1.2, an undular bore appears, atter it exceeds 1.3, a breaking bore occurs, and after it exceeds 1.7, the bore is broken.

A preliminary study of the turbulence features of the tidal bore in the Qiantang River,China

In this paper, the turbulence characteristics of the tidal flow in the Qiantang River, China, the world-famous Qiantang bore, are studied. A detailed field observation at the Yanguan section of the Qiantang River was carried out during the spring tide in October 2010 with a continuous collection of high frequency turbulence data. The data analysis shows that the hydrodynamic processes are characterized by a strong tidal bore. Statistics of the turbulence such as the probability distributions of the turbulent components, the variance terms and the covariance terms are found consistent with those of previous studies of estuaries without the tidal bore. However, along the vertical profile, the distributions of all variables become more scattered downwards. The horizontal turbulence fluctuations are of a similar magnitude while the vertical turbulence has a fluctuation magnitffde about 1/3 of that of the horizontal turbulences. The fluctuation strengths and the Reynolds stresses are much larger than those of other estuaries when the bore arrives. The bottom shear stress varies periodically with the tides, less than 0.44 N/m2 during the ebb but is increased drastically at the bore arrival, with the maximum being 0.92 N/m2. A good linear relationship is found between the bottom shear stress and the bottom suspended sediment concentration.

Effect of dike line adjustment on the tidal bore in the Qiantang Estuary,China

In this paper,the effect of the dike line adjustment on the Qiantang Tidal Bore（QTB）is studied by physcial experiments.A lab-scale physical model of the Qiantang Estuary is built and the tidal bore is generated.With this model,the formation and pro-pagation processes of the tidal bore are simulated with or without the dike line adjustment.It is shown that the adjusted dike line changes the direction of the reflected tidal bore.The height of the tidal bore increases in the upstream region where the dike line is contracted.In the tested bent and forking regimes,the bore height at the upstream station is increased by 0.10 m and 0.04 m,respectively.Furthermore,the crossing bore still exists near the Daquekou station and the location slightly moves by about 3 km to the downstream region.

Sedimentation processes and sedimentary characteristics of tidal bores along the north bank of the Qiantang Estuary

A tidal bore is a unique Earth surface process, characterized by its highly destructive energy, predictable periodicities and magni-tudes, and the production of characteristic sedimentary features. Tidal bores and associated rapid flood flows are highly turbulent flows of the upper-flow regime with a velocity over several meters per second. Reynolds (Re) and Froude (Fr) numbers, respectively, are larger than 104 and 1.0, making them significantly different from regular tidal flows but analogous to turbidity currents. Until now, understanding of tidal-bore depositional processes and products has been limited because of the difficulty and hazards involved with gauging tidal bores directly. The Qiantang bore is known as the largest breaking bore in the world. Field surveys were carried out in May 2010, along the north bank of the Qiantang Estuary to observe the occurrence of peak bores, including regular observations of current, water level and turbidity at the main channel. Several short cores were sampled on the intertidal flats to study the characteristic sedimentary features of tidal bores. Hydrodynamic and sedimentological studies show that the processes of sediment resuspension, transport and deposition are controlled primarily by the tidal bores, and the subsequent abruptly accelerated and decelerated flood flows, which only account for one tenth of each semidiurnal tidal cycle in the estuary. Tidal-bore deposits are generally poorly sorted because of rapid sedimentation after highly mixed suspension by intense turbulence. This behavior is characteristic of the absence of tractive-current depositional components in a C-M diagram. It also goes along with well-developed massive bedding, graded bedding, basal erosion structures, convolute bedding and dewatering structures. Together, these sedimentary features can constitute fingerprinting of turbidites, widely distributed in the deep-water environment. However, a tidal bore is triggered by intensely deformed tidal waves propagating into a shallow-water environment, which returns to regular tidal flows rapidly after the passage of the bore head. The tidal-bore deposits are usually bounded by the intertidal-flat deposits with typical tidal beddings at the top and on both flanks. The difference between tidal-bore deposits (TBD) and tidal sandy/muddy deposits (TSD/TMD) is evident not only in sedimentary structures, but also in the grain-size composition. They can be clearly distinguished in grain-size bivariate plots, typically the plot of mean grain size vs. standard deviation (or sorting). Some trend variations generally exist in mean grain size with TBD>TSD>TMD, sorting with TMD>TBD>TSD (larger value indicating poorer sorting), and both skewness and kurtosis with TSD>TBD>TMD. These findings will undoubtedly shed new light on our understanding of tidal-bore sedimentology, ancient tidal-bore sedimentary facies and environments, and related oil-and-gas field prospecting.

强涌潮区管袋围堰施工安全风险仿真研究

强涌潮区的水域环境复杂多变,这极大增加了管袋围堰施工安全管理的难度。为确定强涌潮区管袋围堰施工从清基到维护阶段的安全管控重点,首先利用系统理论过程分析法(STPA)对施工安全风险因素进行定性分析,从人员、物资、管理、技术、环境5个维度构建了强涌潮区管袋围堰施工安全风险指标体系;然后建立系统动力学(SD)演化模型,并运用网络层次分析法(ANP)确定各指标权重;最后结合工程实例进行模拟仿真。结果表明:随着工程推进以及对安全投入的逐步增加,管袋围堰施工安全风险水平呈现出先大幅上升,后逐步下降,最终趋于平缓的趋势;人员、物资是清基和吹填期影响施工安全的主要因素,而在排水和维护期,环境、管理是主要影响因素;人员、管理和环境这三因素对安全投入变化更为敏感。建议在施工过程中重视不同阶段之间的管控重点差异,及时转换管理策略并采取针对性措施以有效降低施工安全风险。

特征构筑物涌潮景观形态多样性塑造研究

丰富涌潮景观形态的多样性能增加人们的观潮热情,促进旅游事业发展。结合钱塘江河口海塘安澜工程建设,在对钱塘江河口涌潮景观形态整理分析的基础上,发现海塘塘脚及其护塘丁坝位置,不同类型构筑物与涌潮相互作用可形成多样性的涌潮景观形态。通过室内涌潮水槽和现场试验研究,发现海塘塘脚、丁坝坝面布置的不同构筑物在涌潮水流条件下可塑造冲天、散射等多样性的涌潮景观形态。从特征构筑物激起的水体最大高度及潮景持续时间角度可知,四脚空心块、U型块体、V字型块体等特征构筑物塑造涌潮景观形态的多样性效果较佳。

涌潮水沙动力过程现场观测研究进展

涌潮是潮波传播过程中产生的一种自然现象,是潮波非线性畸变的结果。涌潮有波状和破碎形态之分,波状涌潮是一系列平行向前传播的涌波构成的波列,破碎涌潮则是前锋陡立向前推进的水滚。基于国内外涌潮水沙动力过程现场观测的主要成果,从形成机理出发,归纳涌潮生成的必要条件,剖析潮波运动非线性和摩擦效应对涌潮生成的影响;针对典型的波状和破碎涌潮,总结潮头的自由表面特征参数、流动结构和传播演化特征;回顾涌潮局部湍流和混合过程、泥沙输运和沉积的研究进展,评述涌潮脉冲过程对河口生态环境的影响。涌潮的周期性传播引起自然系统的大规模混合,对潮汐河口区域的生态环境平衡具有重要意义。涌潮现象的研究推动潮汐学的发展,现场观测是涌潮研究的基础。随着仪器设备和分析手段的进步,涌潮多尺度生成与演化机制、涌潮多物理过程耦合作用机理和涌潮脉冲过程的生态效应定量评价是今后需要深入研究的问题。

波状涌潮在变化地形上的水动力研究

本文采用非静压单相流模型(NHWAVE)研究了波状涌潮在变化地形上的传播演变特性。通过设置合理的计算工况,系统分析了涌潮高度、潮前水深和斜坡坡度对波状涌潮水动力特性的影响。计算结果表明,涌潮高度和潮前水深对波状涌潮在变化地形上的水动力特性影响显著,不同的地形坡度对波状涌潮水动力特性影响较小。变化地形的存在可导致涌潮高度显著增大,引起沿程最大水位的剧烈变化,并且使涌潮传播速度降低。随涌潮高度的逐渐增加,斜坡前后潮差持续增大,同时表层速度与水深平均速度均呈现增大趋势。当增加潮前水深时,斜坡前后潮差减小,表层速度与水深平均速度单调递减。本文研究成果对于正确认识波状涌潮在变化地形上的传播演变规律有一定的参考意义,为波状涌潮河段涉水建筑物的工程设计及安全评估提供了科学依据。

钱塘江涌潮影响因素研究

钱塘江涌潮影响因素研究对保护涌潮和涌潮防灾具有重要意义。基于长系列实测水文、地形资料,系统分析了潮汐、径流、河床等自然因素以及治江缩窄、流域建库等人类活动对钱塘江涌潮的影响。研究结果表明:潮差越大、涨潮历时越短,涌潮越强;径流对涌潮存在直接和间接影响,间接影响是径流通过河床冲淤,间接影响潮汐和涌潮,一般是丰水期径流量越大,汛后涌潮越强;同时,河床冲淤影响涌潮平面分布和潮景。治江缩窄后,起潮点和最大涌潮位置下移,下游河段涌潮增大,同时涌潮变化幅度减小。新安江水库建成后,造成涌潮变幅减小。

杭州湾天文潮长周期变化对涌潮的影响

基于长系列实测潮汐资料和调和分析方法,分析了涌潮起潮点下游杭州湾实测潮汐和天文潮长周期变化,进而分析了天文潮变化对钱塘江涌潮的影响。结果表明:乍浦站实测潮汐每年八月初三和八月十八同日同潮实测潮差、潮到时间和涨潮历时变化幅度很大,最大变幅分别为1.95 m、102 min和122 min;乍浦站天文潮每年八月初三和八月十八同日同潮潮差、潮到时间和涨潮历时最大变幅分别为1.52 m、93 min和46 min。天文潮变化对涌潮影响很大,盐官站同日同潮涌潮高度最大相差1.12 m,涌潮到达时间最大相差93 min,涌潮流速最大相差2.05 m/s,涌潮陡度最大相差18.1%。

钱塘江涌潮对承压水位势的波动响应机理探究

根据前人关于压力含水层有越流补给时所建立完整井的公式,得出了压力含水层在钱塘江潮汐荷载作用下水势响应的解析式,将不同潮水位、抽水量带入解析式中,对承压水的变化进行曲线绘制;并与杭州地铁9号线及钱江新城片区的承压水观测资料进行分析对比,得出理论与实测两者之间存在的联系,以及钱塘江潮汐对承压水水位的变化规律。

雷达测波技术在钱塘江涌潮观测中的应用

钱塘江涌潮水动力强劲,水文测验条件恶劣。受测量技术和设备的限制,涌潮现场观测资料稀少。基于调频连续波雷达测波技术,采用高精度的回波反演算法,实现强潮河口涌潮的定点测量。根据长历时的现场观测数据,对钱塘江河口典型河段涌潮的传播特性进行分析。研究结果表明:涌潮局部水动力过程受岸线和江道地形控制;交叉潮具有复杂的水位响应特征,呈现典型的二次抬升过程,水位的变化与两股涌潮的强度、传播方向和间隔时间相关。雷达测波技术实现涌潮过程捕捉的自动化,有利于涌潮要素的准确提取,显著地提高观测精度。

钱塘江河口涌潮长期观测体系的建立

建立钱塘江河口涌潮观测体系,是防御潮灾、保护涌潮资源和研究涌潮规律的重要基础工作。在梳理以往观测资料的基础上,结合不同河段的涌潮特性和现状节点,沿钱塘江两岸布设盐官和美女坝等2站8点,按涌潮的水力特性确定涌潮高度、形态、流速、压力、行进速度、含沙量、潮位过程、河床冲淤过程及风速风向等9项观测内容,初步形成钱塘江河口的涌潮观测体系,为涌潮的保护利用及河口两岸的基础建设提供技术支撑。

钱塘江河口泥沙特性及河床冲淤研究

简要介绍了钱塘江河口含沙量、泥沙粒径的分布特性,建立了钱塘江河口泥沙起动流速和挟沙能力公式,分析了河床大冲大淤、大冲以后大淤、上游段洪冲潮淤、下游段洪淤潮冲等河床演变特性,研究了河床冲淤对洪水和潮汐的巨大反作用.分析研究表明,涌潮到达时,水流激烈冲刷河床,引起含沙量剧增,大多在涌潮过后的20 min内达到极值,形成大含沙量区.在平水期和枯水期,涨潮输沙量明显大于落潮,加剧了河口上游的淤积,涌潮是钱塘江河口大冲大淤的机理之一.

钱塘江河口涌潮传播速度研究

为分析钱塘江河口涌潮传播速度的时空规律及其影响因素,应用从一维连续方程和动量方程出发推导的涌潮传播速度计算公式分析涌潮传播速度的影响因素,并将其应用于钱塘江河口涌潮的计算,结果表明与实际情况吻合良好.利用实测资料分析了钱塘江涌潮传播速度的变化规律及影响因素,与计算公式的分析结果相一致.影响涌潮传播速度的因素主要有下游潮差、江道地形和径流流量,其月内变化主要受下游潮差变化的影响,此外在一定程度上还受到上游径流量的影响.在年际尺度上,则主要取决于河床地形的冲淤变化.应用解析算法和常规水文资料建立的涌潮传播速度计算方法简单易行,可较好地应用于涌潮到达时间的预报.

钱塘江涌潮特性及其数值模拟

在钱塘江涌潮实测资料的基础上,分析了钱塘江涌潮高度、涌潮传播速度、涌潮流速、涌潮形态及景观、涌潮压力等涌潮特性.同时,应用基于KFVS(kinetic flux vector splitting)格式的二维涌潮数值模型模拟了钱塘江涌潮的形成、发展和衰减的全过程,复演了"交叉潮"、"一线潮"、"回头潮"等现象.通过对计算结果的比较分析,对涌潮特性有了进一步的认识.

涌潮的水槽模拟及验证

在涌潮玻璃水槽中,通过调节水槽两端变频器的频率控制潮前水深的稳定,使水体具有一定的潮前落潮流速,并以此为工况,增加下游变频器不同的运行频率模拟各种强度的涌潮,测试涌潮的传播速度、涌潮高度、流速垂向分布等水动力学特征参数,捕捉涌潮形态.在此基础上,选用2010年10月钱塘江河口盐官河段的现场实测资料对试验结果进行比较分析,结果表明涌潮水槽试验结果与盐官河段实地观测资料匹配良好.这说明涌潮玻璃水槽物理模型能成功模拟涌潮,适用于涌潮的测试研究。

长江口北支的涌潮及其对河口的影响

根据现场踏勘、实测并结合历史资料,阐述了长江口北支涌潮的发育、种类、形态和特点,并利用流体水跃现象的Froude数判别,解释了涌潮成因。进一步研究表明,河槽束狭加大涨潮流速,河床淤浅则减缓潮波传速。北支在自然和人为的影响下,河槽不断束狭、河床逐渐淤浅是近年来涌潮发生次数增多、潮头增大的原因。随着涌潮潮头的推进,大量水沙上溯,这对北支和南支上段的滩、槽变化和河口环境有着深刻的影响。