High-Precision Time Delay Estimation Based on Closed-Form Offset Compensation

To improve the estimation accuracy,a novel time delay estimation(TDE)method based on the closed-form offset compensation is proposed.Firstly,we use the generalized cross-correlation with phase transform(GCC-PHAT)method to obtain the initial TDE.Secondly,a signal model using normalized cross spectrum is established,and the noise subspace is extracted by eigenvalue decomposition(EVD)of covariance matrix.Using the orthogonal relation between the steering vector and the noise subspace,the first-order Taylor expansion is carried out on the steering vector reconstructed by the initial TDE.Finally,the offsets are compensated via simple least squares(LS).Compared to other state-of-the-art methods,the proposed method significantly reduces the computational complexity and achieves better estimation performance.Experiments on both simulation and real-world data verify the efficiency of the proposed approach.

Performance Evaluation of Three-Dimensional UWB Real-Time Locating Auto-Positioning System for Fire Rescue

Fire rescue challenges and solutions have evolved from straightfor-ward plane rescue to encompass 3D space due to the rise of high-rise city buildings.Hence,this study facilitates a system with quick and simplified on-site launching and generates real-time location data,enabling fire rescuers to arrive at the intended spot faster and correctly for effective and precise rescue.Auto-positioning with step-by-step instructions is proposed when launching the locating system,while no extra measuring instrument like Total Station(TS)is needed.Real-time location tracking is provided via a 3D space real-time locating system(RTLS)constructed using Ultra-wide Bandwidth technology(UWB),which requires electromagnetic waves to pass through concrete walls.A hybrid weighted least squares with a time difference of arrival(WLS/TDOA)positioning method is proposed to address real path-tracking issues in 3D space and to meet RTLS requirements for quick computing in real-world applications.The 3D WLS/TDOA algorithm is theoretically constructed with the Cramer-Rao lower bound(CRLB).The computing complexity is reduced to the lower bound for embedded hardware to directly compute the time differential of the arriving signals using the time-to-digital converter(TDC).The results of the experiments show that the errors are controlled when the positioning algorithm is applied in various complicated situations to fulfill the requirements of engineering applications.The statistical analysis of the data reveals that the proposed UWB RTLS auto-positioning system can track target tags with an accuracy of 0.20 m.

Aviation multi-station collaborative detecting based on time-frequency correlation of data-link

As an important application research topic of the intelligent aviation multi-station, collaborative detecting must overcome the problem of scouting measurement with status of 'fragmentation', and the NP-hardness problem of matching association between target and measurement in the process of scouting to data-link, which has complicated technical architecture of network construction. In this paper, taking advantage of cooperation mechanism on signal level in the aviation multi-station sympathetic network, a method of obtaining target time difference of arrival (TDOA) measurement using multi-station collaborative detecting based on time-frequency association is proposed. The method can not only achieve matching between target and its measurement, but also obtain TDOA measurement by further evolutionary transaction through refreshing sequential pulse time of arrival (TOA) measurement matrix for matching and correlating. Simulation results show that the accuracy of TDOA measurement has significant superiority over TOA, and detection probability of false TDOA measurement introduced by noise and fake measurement can be reduced effectively.

Hybrid TDOA/FDOA and track optimization of UAV swarm based on A-optimality

The source location based on the hybrid time difference of arrival(TDOA)/frequency difference of arrival(FDOA) is a basic problem in wireless sensor networks, and the layout of sensors in the hybrid TDOA/FDOA positioning will greatly affect the accuracy of positioning. Using unmanned aerial vehicle(UAV) as base stations, by optimizing the trajectory of the UAV swarm, an optimal positioning configuration is formed to improve the accuracy of the target position and velocity estimation. In this paper, a hybrid TDOA/FDOA positioning model is first established, and the positioning accuracy of the hybrid TDOA/FDOA under different positioning configurations and different measurement errors is simulated by the geometric dilution of precision(GDOP) factor. Second, the Cramer-Rao lower bound(CRLB) matrix of hybrid TDOA/FDOA location under different moving states of the target is derived theoretically, the objective function of the track optimization is obtained, and the track of the UAV swarm is optimized in real time. The simulation results show that the track optimization effectively improves the accuracy of the target position and velocity estimation.

Three-Dimensional Sound Source Location Algorithm for Subsea Leakage Using Hydrophone

Leakages from subsea oil and gas equipment cause substantial economic losses and damage to marine ecosystem,so it is essential to locate the source of the leak.However,due to the complexity and variability of the marine environment,the signals collected by hydrophone contain a variety of noises,which makes it challenging to extract useful signals for localization.To solve this problem,a hydrophone denoising algorithm is proposed based on variational modal decomposition(VMD)with grey wolf optimization.First,the average envelope entropy is used as the fitness function of the grey wolf optimizer to find the optimal solution for the parameters K andα.Afterward,the VMD algorithm decomposes the original signal parameters to obtain the intrinsic mode functions(IMFs).Subsequently,the number of interrelationships between each IMF and the original signal was calculated,the threshold value was set,and the noise signal was removed to calculate the time difference using the valid signal obtained by reconstruction.Finally,the arrival time difference is used to locate the origin of the leak.The localization accuracy of the method in finding leaks is investigated experimentally by constructing a simulated leak test rig,and the effectiveness and feasibility of the method are verified.

Localization in modified polar representation: hybrid measurements and closed-form solution

Classical localization methods use Cartesian or Polar coordinates, which require a priori range information to determine whether to estimate position or to only find bearings. The modified polar representation (MPR) unifies near-field and farfield models, alleviating the thresholding effect. Current localization methods in MPR based on the angle of arrival (AOA) and time difference of arrival (TDOA) measurements resort to semidefinite relaxation (SDR) and Gauss-Newton iteration, which are computationally complex and face the possible diverge problem. This paper formulates a pseudo linear equation between the measurements and the unknown MPR position,which leads to a closed-form solution for the hybrid TDOA-AOA localization problem, namely hybrid constrained optimization(HCO). HCO attains Cramér-Rao bound (CRB)-level accuracy for mild Gaussian noise. Compared with the existing closed-form solutions for the hybrid TDOA-AOA case, HCO provides comparable performance to the hybrid generalized trust region subproblem (HGTRS) solution and is better than the hybrid successive unconstrained minimization (HSUM) solution in large noise region. Its computational complexity is lower than that of HGTRS. Simulations validate the performance of HCO achieves the CRB that the maximum likelihood estimator (MLE) attains if the noise is small, but the MLE deviates from CRB earlier.

TDOA and track optimization of UAV swarm based on D-optimality

To solve the problem of time difference of arrival(TDOA)positioning and tracking of targets by the unmanned aerial vehicles(UAV)swarm in future air combat,this paper adopts the TDOA positioning method and uses time difference sensors of the UAV swarm to locate target radiation sources.Firstly,a TDOA model for the target is set up for the UAV swarm under the condition that the error variance varies with the received signal-to-noise ratio.The accuracy of the positioning error is analyzed by geometric dilution of precision(GDOP).The D-optimality criterion of the positioning model is theoretically derived.The target is positioned and settled,and the maximum value of the Fisher information matrix determinant is used as the optimization objective function to optimize the track of the UAV in real time.Simulation results show that the track optimization improves the positioning accuracy and stability of the UAV swarm to the target.

Passive Localization of Signal Source Based on UAVs in Complex Environment

For the influence caused by multipath fading and non-line-of-sight(NLOS)transmission,it is challenging to accurately localize a moving signal source in complex environment by using the wireless sensor network(WSN)on the ground.In this paper,we establish a special WSN in the sky to address this challenge,where each sensor is loaded on an unmanned aerial vehicle(UAV)and the operation center of all the UAVs is fixed on the ground.Based on the analyzing of the optimal distribution and the position error calibration of all the sensors,we formulate the localization scheme to estimate the position of the target source,which combines the time difference of arrival(TDOA)method and the frequency difference of arrival(FDOA)method.Then by employing the semidefinite programming approach,we accurately obtain the position and velocity of the signal source.In the simulation,the validity of the proposed method is verified through the performance comparison.

COMPARISON OF TDOA LOCATION ALGORITHMS WITH DIRECT SOLUTION METHOD

For Time Difference Of Arrival(TDOA) location based on multi-ground stations scene,two direct solution methods are proposed to solve the target position in TDOA location.Therein,the solving methods are realized in the rectangular and polar coordinates.On the condition of rectangular coordinates,first of all,it solves the radial range between the target and reference station,then cal-culates the location of the target.In the case of polar coordinates,the azimuth between the target and reference station is solved first,then the radial range between the target and reference station is figured out,finally the location of the target is obtained.Simultaneously,the simulation and comparison analysis are given in detail,and show that the polar solving method has the better fuzzy performance than that of rectangular coordinate.

Novel method for radial velocity difference estimation of moving targets with wideband signals

For the frequency difference of arrival （FDOA） esti-mation in passive location, this paper transforms the frequency difference estimation into the radial velocity difference estimation, which is difficult to achieve a high accuracy due to the mismatch between the sampling period and the pulse repetition interval. The proposed algorithm firstly estimates the point-in-time that each pulse arrives at two receivers accurately. Secondly two time of arrival （TOA） sequences are subtracted. And final y the radial ve-locity difference of a target relative to two stations with the least square method is estimated. This algorithm only needs accurate estimation of the time delay between pulses and is not influenced by parameters such as frequency and modulation mode. It avoids transmitting a large amount of data between two stations in real time. Simulation results corroborate that the performance is bet-ter than the arithmetic average of the Cramer-Rao lower bound （CRLB） for monopulse under suitable conditions.

Direct solution for fixed source location using well-posed TDOA and FDOA measurements

Based on the time differences of arrival(TDOA) and frequency differences of arrival(FDOA) measurements of the given planar stationary radiation source, the joint TDOA/FDOA location algorithm which solves the location of the target directly is proposed. Compared with weighted least squares(WLS) methods,the proposed algorithm is also suitable for well-posed conditions,and gets rid of the dependence on the constraints of Earth's surface. First of all, the solution formulas are expressed by the radial range. Then substitute it into the equation of the radial range to figure out the radial range between the target and the reference station. Finally use the solution expression of the target location to estimate the location of the target accurately. The proposed algorithm solves the problem that WLS methods have a large positioning error when the number of observation stations is not over-determined. Simulation results show the effectiveness of the proposed algorithm, including effectively increasing the positioning accuracy and reducing the number of observatories.

Joint TDOA and AOA location algorithm

For the joint time difference of arrival（TDOA） and angle of arrival（AOA） location scene,two methods are proposed based on the rectangular coordinates and the polar coordinates,respectively.The problem is solved perfectly by calculating the target position with the joint TDOA and AOA location.On the condition of rectangular coordinates,first of all,it figures out the radial range between target and reference stations,then calculates the location of the target.In the case of polar coordinates,first of all,it figures out the azimuth between target and reference stations,then figures out the radial range between target and reference stations,finally obtains the location of the target.Simultaneously,simulation analyses show that the theoretical analysis is correct,and the proposed methods also provide the application of the joint TDOA and AOA location algorithm with the theoretical basis.

Practical constrained least-square algorithm for moving source location using TDOA and FDOA measurements

By utilizing the time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements of signals received at a number of receivers, a constrained least-square （CLS） algorithm for estimating the position and velocity of a moving source is proposed. By utilizing the Lagrange multipliers technique, the known relation between the intermediate variables and the source location coordinates could be exploited to constrain the solution. And without requiring apriori knowledge of TDOA and FDOA measurement noises, the proposed algorithm can satisfy the demand of practical applications. Additionally, on basis of con- volute and polynomial rooting operations, the Lagrange multipliers can be obtained efficiently and robustly allowing real-time imple- mentation and global convergence. Simulation results show that the proposed estimator achieves remarkably better performance than the two-step weighted least square （WLS） approach especially for higher measurement noise level.

BFGS quasi-Newton location algorithm using TDOAs and GROAs

With the emergence of location-based applications in various fields, the higher accuracy of positioning is demanded. By utilizing the time differences of arrival （TDOAs） and gain ratios of arrival （GROAs）, an efficient algorithm for estimating the position is proposed, which exploits the Broyden-Fletcher-Goldfarb-Shanno （BFGS） quasi-Newton method to solve nonlinear equations at the source location under the additive measurement error. Although the accuracy of two-step weighted-least-square （WLS） method based on TDOAs and GROAs is very high, this method has a high computational complexity. While the proposed approach can achieve the same accuracy and bias with the lower computational complexity when the signal-to-noise ratio （SNR） is high, especially it can achieve better accuracy and smaller bias at a lower SNR. The proposed algorithm can be applied to the actual environment due to its real-time property and good robust performance. Simulation results show that with a good initial guess to begin with, the proposed estimator converges to the true solution and achieves the Cramer-Rao lower bound （CRLB） accuracy for both near-field and far-field sources.

TDOA-based Sybil attack detection scheme for wireless sensor networks

As wireless sensor networks （WSN） are deployed in fire monitoring, object tracking applications, security emerges as a central requirement. A case that Sybil node illegitimately reports messages to the master node with multiple non-existent identities （ID） will cause harmful effects on decision-making or resource allocation in these applications. In this paper, we present an efficient and lightweight solution for Sybil attack detection based on the time difference of arrival （TDOA） between the source node and beacon nodes. This solution can detect the existence of Sybil attacks, and locate the Sybil nodes. We demonstrate efficiency of the solution through experiments. The experiments show that this solution can detect all Sybil attack cases without missing.

Distributed adaptive direct position determination based on diffusion framework

The conventional direct position determination（DPD） algorithm processes all received signals on a single sensor.When sensors have limited computational capabilities or energy storage,it is desirable to distribute the computation among other sensors.A distributed adaptive DPD（DADPD）algorithm based on diffusion framework is proposed for emitter localization.Unlike the corresponding centralized adaptive DPD（CADPD） algorithm,all but one sensor in the proposed algorithm participate in processing the received signals and estimating the common emitter position,respectively.The computational load and energy consumption on a single sensor in the CADPD algorithm is distributed among other computing sensors in a balanced manner.Exactly the same iterative localization algorithm is carried out in each computing sensor,respectively,and the algorithm in each computing sensor exhibits quite similar convergence behavior.The difference of the localization and tracking performance between the proposed distributed algorithm and the corresponding CADPD algorithm is negligible through simulation evaluations.

Non-Linear Localization Algorithm Based on Newton Iterations

In order to improve the performance of time difference of arrival(TDOA)localization,a nonlinear least squares algorithm is proposed in this paper.Firstly,based on the criterion of the minimized sum of square error of time difference of arrival,the location estimation is expressed as an optimal problem of a non-linear programming.Then,an initial point is obtained using the semi-definite programming.And finally,the location is extracted from the local optimal solution acquired by Newton iterations.Simulation results show that when the number of anchor nodes is large,the performance of the proposed algorithm will be significantly better than that of semi-definite programming approach with the increase of measurement noise.

Acoustic localization with multi-layer isogradient sound speed profile using TDOA and FDOA

In the underwater medium,the speed of sound varies with water depth,temperature,and salinity.The inhomogeneity of water leads to bending of sound rays,making the existing localization algorithms based on straightline propagation less precise.To realize high-precision node positioning in underwater acoustic sensor networks(UASNs),a multi-layer isogradient sound speed profile(SSP)model is developed using the linear segmentation approximation approach.Then,the sound ray tracking problem is converted into a polynomial root-searching problem.Based on the derived gradient of the signal’s Doppler shift at the sensor node,a novel underwater node localization algorithm is proposed using both the time difference of arrival(TDOA)and frequency difference of arrival(FDOA).Simulations are implemented to illustrate the effectiveness of the proposed algorithm.Compared with the traditional straight-line propagation method,the proposed algorithm can effectively handle the sound ray bending phenomenon.Estimation accuracy with different SSP modeling errors is also investigated.Overall,accurate and reliable node localization can be achieved.

Semidefinite programming approach for TDOA/GROA based source localization

Time-differences-of-arrival （TDOA） and gain-ratios-of- arrival （GROA） measurements are used to determine the passive source location. Based on the measurement models, the con- strained weighted least squares （CWLS） estimator is presented. Due to the nonconvex nature of the CWLS problem, it is difficult to obtain its globally optimal solution. However, according to the semidefinite relaxation, the CWLS problem can be relaxed as a convex semidefinite programming problem （SDP）, which can be solved by using modern convex optimization algorithms. Moreover, this relaxation can be proved to be tight, i.e., the SDP solves the relaxed CWLS problem, and this hence guarantees the good per- formance of the proposed method. Furthermore, this method is extended to solve the localization problem with sensor position errors. Simulation results corroborate the theoretical results and the good performance of the proposed method.

A new iterative algorithm for geolocating a known altitude target using TDOA and FDOA measurements in the presence of satellite location uncertainty

This paper considers the problem of geolocating a target on the Earth surface whose altitude is known previously using the target signal time difference of arrival （TDOA） and frequency difference of arrival （FDOA） measurements obtained at satellites. The number of satellites available for the geolocation task is more than sufficient and their locations are subject to random errors. This paper derives the constrained Cramor-Rao lower bound （CCRLB） of the target position, and on the basis of the CCRLB analysis, an approximately efficient constrained maximum likelihood estimator （CMLE） for geolocating the target is established. A new iterative algorithm for solving the CMLE is then proposed, where the updated target position estimate is shown to be the globally optimal solution to a generalized trust region sub-problem （GTRS） which can be found via a simple bisection search. First-order mean square error （MSE） analysis is conducted to quantify the performance degradation when the known target altitude is assumed to be precise but indeed has an unknown but deterministic error. Computer simulations are used to compare the performance of the proposed iterative geolocation technique with those of two benchmark algorithms. They verify the approximate efficiency of the proposed algorithm and the validity of the MSE analysis.