A novel inverse scattering method to reconstruct the permittivity profile of one-dimensional multi-layered media is proposed in this paper.Based on the equivalent network ofthe medium,a concept of time domain signal f...A novel inverse scattering method to reconstruct the permittivity profile of one-dimensional multi-layered media is proposed in this paper.Based on the equivalent network ofthe medium,a concept of time domain signal flow graph and its basic principles are introduced,from which the reflection coefficient of the medium in time domain can be shown to be a series ofDirac δ-functions(pulse responses).In terms of the pulse responses,we will reconstruct both thepermittivity and the thickness of each layer will accurately be reconstructed.Numerical examplesverify the applicability of this展开更多
Planetary gear train is a critical transmission component in large equipment such as helicopters and wind turbines. Conducting damage perception of planetary gear trains is of great significance for the safe operation...Planetary gear train is a critical transmission component in large equipment such as helicopters and wind turbines. Conducting damage perception of planetary gear trains is of great significance for the safe operation of equipment. Existing methods for damage perception of planetary gear trains mainly rely on linear vibration analysis. However, these methods based on linear vibration signal analysis face challenges such as rich vibration sources, complex signal coupling and modulation mechanisms, significant influence of transmission paths, and difficulties in separating damage information. This paper proposes a method for separating instantaneous angular speed (IAS) signals for planetary gear fault diagnosis. Firstly, this method obtains encoder pulse signals through a built-in encoder. Based on this, it calculates the IAS signals using the Hilbert transform, and obtains the time-domain synchronous average signal of the IAS of the planetary gear through time-domain synchronous averaging technology, thus realizing the fault diagnosis of the planetary gear train. Experimental results validate the effectiveness of the calculated IAS signals, demonstrating that the time-domain synchronous averaging technology can highlight impact characteristics, effectively separate and extract fault impacts, greatly reduce the testing cost of experiments, and provide an effective tool for the fault diagnosis of planetary gear trains.展开更多
The paper presents the microwave signal processing method using MATLAB based on the result of microwave imaging system simulation developed using Computer Simulation Technology (CST). The simulation system contains a ...The paper presents the microwave signal processing method using MATLAB based on the result of microwave imaging system simulation developed using Computer Simulation Technology (CST). The simulation system contains a transmitting/receiving antenna, human brain and a tumor inside the brain model. The source signal, microwave signal operates from 1 to 10 GHz. The generated scattering parameters (S-parameters) are in frequency domain form. This paper describes in detail regarding the signal conversion from frequency domain to time domain through proposed Inverse Fast Fourier Transform (IFFT) method as well as the noise filtering process. Peaks detection process was performed in order to identify the time delay of the reflection points at different Y-axis展开更多
The digital coherent detection technique has been investigated without any frequency-scanning device in the Brillouin optical time domain reflectometry （BOTDR）, where the simplex pulse codes are applied in the sensi...The digital coherent detection technique has been investigated without any frequency-scanning device in the Brillouin optical time domain reflectometry （BOTDR）, where the simplex pulse codes are applied in the sensing system. The time domain signal of every code sequence is collected by the data acquisition card （DAQ）. A shift-averaging technique is applied in the frequency domain for the reason that the local oscillator （LO） in the coherent detection is fix-frequency deviated from the primary source. With the 31-bit simplex code, the signal-to-noise ratio （SNR） has 3.5-dB enhancement with the same single pulse traces, accordant with the theoretical analysis. The frequency fluctuation for simplex codes is 14.01 MHz less than that for a single pulse as to 4-m spatial resolution. The results are believed to be beneficial for the BOTDR performance improvement.展开更多
基于扩展频域时域反射法(Spread Spectral Time Domain Reflectometry,SSTDR)的光伏阵列故障诊断方法存在检测盲区和衰减特性,有必要研究检测信号的性质以提高故障检测性能。首先,对检测信号在光伏阵列中的传输行为进行研究,探究不同信...基于扩展频域时域反射法(Spread Spectral Time Domain Reflectometry,SSTDR)的光伏阵列故障诊断方法存在检测盲区和衰减特性,有必要研究检测信号的性质以提高故障检测性能。首先,对检测信号在光伏阵列中的传输行为进行研究,探究不同信号参数对检测范围和精度的影响;其次,根据光伏电池的动态模型和排布规律,搭建光伏阵列故障检测仿真平台,通过断路故障仿真实验对结果进行验证,结果表明,改善信号能有效增强相关峰辨识能力,使光伏组件检测数量增加4块;最后,综合考虑检测盲区和衰减特性对检测性能的影响,提出基于SSTDR的光伏阵列故障检测信号选择策略,用以确定测距范围和最优信号参数。展开更多
The randomly intermittent spectra (RIS) signal is employed to combat spectrum congestion in radar and other radio services to evade the external interferences in high-frequency (HF) and ultrahigh-frequency (UHF) bands...The randomly intermittent spectra (RIS) signal is employed to combat spectrum congestion in radar and other radio services to evade the external interferences in high-frequency (HF) and ultrahigh-frequency (UHF) bands. However, the spectra discontinuity of the signal gets rise to high range sidelobes when matching the reflected echo, which is much more difficult for targets detection. So it is indispensable to investigate the technique for sidelobes suppression of the range profile when RIS signal is utilized, This paper introduced a new processing technique based on time domain filtering to lower the range sidelobes. A robust and effetive algorithm is adopted to solve the coefficients of the filter, and the restriction on the desired response of the filter is derived. The simulation results show that the peak range sidelobe can be reduced to -27 dB from -9.5 dB while the frequency band span (FBS) is 200 kHz.展开更多
The basic objective of time-scale transformation is to compress or expand the signal in time field while keeping the same spectral properties. This paper presents two methods to derive time-scale transformation formul...The basic objective of time-scale transformation is to compress or expand the signal in time field while keeping the same spectral properties. This paper presents two methods to derive time-scale transformation formula based on continuous wavelet transform. For an arbitrary given square-integrable function f(t),g(t) = f(t/λ) is derived by continuous wavelet transform and its inverse transform. The result shows that time-scale transformation may be obtained through the modification of the time-scale of wavelet function filter using equivalent substitution. The paper demonstrates the result by theoretic derivations and experimental simulation.展开更多
文摘A novel inverse scattering method to reconstruct the permittivity profile of one-dimensional multi-layered media is proposed in this paper.Based on the equivalent network ofthe medium,a concept of time domain signal flow graph and its basic principles are introduced,from which the reflection coefficient of the medium in time domain can be shown to be a series ofDirac δ-functions(pulse responses).In terms of the pulse responses,we will reconstruct both thepermittivity and the thickness of each layer will accurately be reconstructed.Numerical examplesverify the applicability of this
文摘Planetary gear train is a critical transmission component in large equipment such as helicopters and wind turbines. Conducting damage perception of planetary gear trains is of great significance for the safe operation of equipment. Existing methods for damage perception of planetary gear trains mainly rely on linear vibration analysis. However, these methods based on linear vibration signal analysis face challenges such as rich vibration sources, complex signal coupling and modulation mechanisms, significant influence of transmission paths, and difficulties in separating damage information. This paper proposes a method for separating instantaneous angular speed (IAS) signals for planetary gear fault diagnosis. Firstly, this method obtains encoder pulse signals through a built-in encoder. Based on this, it calculates the IAS signals using the Hilbert transform, and obtains the time-domain synchronous average signal of the IAS of the planetary gear through time-domain synchronous averaging technology, thus realizing the fault diagnosis of the planetary gear train. Experimental results validate the effectiveness of the calculated IAS signals, demonstrating that the time-domain synchronous averaging technology can highlight impact characteristics, effectively separate and extract fault impacts, greatly reduce the testing cost of experiments, and provide an effective tool for the fault diagnosis of planetary gear trains.
文摘The paper presents the microwave signal processing method using MATLAB based on the result of microwave imaging system simulation developed using Computer Simulation Technology (CST). The simulation system contains a transmitting/receiving antenna, human brain and a tumor inside the brain model. The source signal, microwave signal operates from 1 to 10 GHz. The generated scattering parameters (S-parameters) are in frequency domain form. This paper describes in detail regarding the signal conversion from frequency domain to time domain through proposed Inverse Fast Fourier Transform (IFFT) method as well as the noise filtering process. Peaks detection process was performed in order to identify the time delay of the reflection points at different Y-axis
基金supported by the National High Technology Research and Development Program of China(Grant No.2012AA041203)the National Natural Science Foundation of China(Grant Nos.61377062 and 31201377)+1 种基金the Program of Shanghai Excellent Technical Leaders,China(Grant No.13XD1425400)the Doctorial Fund of Zhengzhou University of Light Industry,China(Grant No.2013BSJJ012)
文摘The digital coherent detection technique has been investigated without any frequency-scanning device in the Brillouin optical time domain reflectometry （BOTDR）, where the simplex pulse codes are applied in the sensing system. The time domain signal of every code sequence is collected by the data acquisition card （DAQ）. A shift-averaging technique is applied in the frequency domain for the reason that the local oscillator （LO） in the coherent detection is fix-frequency deviated from the primary source. With the 31-bit simplex code, the signal-to-noise ratio （SNR） has 3.5-dB enhancement with the same single pulse traces, accordant with the theoretical analysis. The frequency fluctuation for simplex codes is 14.01 MHz less than that for a single pulse as to 4-m spatial resolution. The results are believed to be beneficial for the BOTDR performance improvement.
文摘基于扩展频域时域反射法(Spread Spectral Time Domain Reflectometry,SSTDR)的光伏阵列故障诊断方法存在检测盲区和衰减特性,有必要研究检测信号的性质以提高故障检测性能。首先,对检测信号在光伏阵列中的传输行为进行研究,探究不同信号参数对检测范围和精度的影响;其次,根据光伏电池的动态模型和排布规律,搭建光伏阵列故障检测仿真平台,通过断路故障仿真实验对结果进行验证,结果表明,改善信号能有效增强相关峰辨识能力,使光伏组件检测数量增加4块;最后,综合考虑检测盲区和衰减特性对检测性能的影响,提出基于SSTDR的光伏阵列故障检测信号选择策略,用以确定测距范围和最优信号参数。
文摘The randomly intermittent spectra (RIS) signal is employed to combat spectrum congestion in radar and other radio services to evade the external interferences in high-frequency (HF) and ultrahigh-frequency (UHF) bands. However, the spectra discontinuity of the signal gets rise to high range sidelobes when matching the reflected echo, which is much more difficult for targets detection. So it is indispensable to investigate the technique for sidelobes suppression of the range profile when RIS signal is utilized, This paper introduced a new processing technique based on time domain filtering to lower the range sidelobes. A robust and effetive algorithm is adopted to solve the coefficients of the filter, and the restriction on the desired response of the filter is derived. The simulation results show that the peak range sidelobe can be reduced to -27 dB from -9.5 dB while the frequency band span (FBS) is 200 kHz.
文摘The basic objective of time-scale transformation is to compress or expand the signal in time field while keeping the same spectral properties. This paper presents two methods to derive time-scale transformation formula based on continuous wavelet transform. For an arbitrary given square-integrable function f(t),g(t) = f(t/λ) is derived by continuous wavelet transform and its inverse transform. The result shows that time-scale transformation may be obtained through the modification of the time-scale of wavelet function filter using equivalent substitution. The paper demonstrates the result by theoretic derivations and experimental simulation.
