Discussion of the Horizontal Intensity of Late Quaternary Fault Activity Along the Tianjingshan Fault Zone in Different Time Intervals and Fault Segments

By computing and classifying the data of gully offset obtained from field surveys along the Tianjingshan fault zone and estimating the ages of three types of gullies,the strike-slip rates along the fault zone are discussed in different time intervals and fault segments.The results suggest that the intensity of activity along the fault zone is not strong,but the differences between different time intervals and fault segments since the late Pleistocene have been obvious.The average rates range from 0.23 mm/a to 1.62 mm/a.The largest average rate is 1.40 mm/a,which occurred in the early and middle of late Pleistocene along the western segment of the fault zone.Since the late stage of the late Pleistocene,the center of faulting activity of the fault zone has shifted to the middle segment,and the average slip rates range have changed from 1.30 mm/a to 1.63 mm/a.

Unsupervised Time Series Segmentation: A Survey on Recent Advances

Time series segmentation has attracted more interests in recent years,which aims to segment time series into different segments,each reflects a state of the monitored objects.Although there have been many surveys on time series segmentation,most of them focus more on change point detection(CPD)methods and overlook the advances in boundary detection(BD)and state detection(SD)methods.In this paper,we categorize time series segmentation methods into CPD,BD,and SD methods,with a specific focus on recent advances in BD and SD methods.Within the scope of BD and SD,we subdivide the methods based on their underlying models/techniques and focus on the milestones that have shaped the development trajectory of each category.As a conclusion,we found that:(1)Existing methods failed to provide sufficient support for online working,with only a few methods supporting online deployment;(2)Most existing methods require the specification of parameters,which hinders their ability to work adaptively;(3)Existing SD methods do not attach importance to accurate detection of boundary points in evaluation,which may lead to limitations in boundary point detection.We highlight the ability to working online and adaptively as important attributes of segmentation methods,the boundary detection accuracy as a neglected metrics for SD methods.

Micro-Sized Pinhole Inspection with Segmented Time Reversal and High-Order Modes Cluster Lamb Waves Based on EMATs

Pinhole corrosion is difficult to discover through conventional ultrasonic guided waves inspection,particularly for micro-sized pinholes less than 1 mm in diameter.This study proposes a new micro-sized pinhole inspection method based on segmented time reversal(STR)and high-order modes cluster(HOMC)Lamb waves.First,the principle of defect echo enhancement using STR is introduced.Conventional and STR inspection experiments were conducted on aluminum plates with a thickness of 3 mm and defects with different diameters and depths.The parameters of the segment window are discussed in detail.The results indicate that the proposed method had an amplitude four times larger than of conventional ultrasonic guided waves inspection method for pinhole defect detection and could detect micro-sized pinhole defects as small as 0.5 mm in diameter and 0.5 mm in depth.Moreover,the segment window location and width(5-10 times width of the conventional excitation signal)did not affect the detection sensitivity.The combination of low-power and STR is more conducive to detection in different environments,indicating the robustness of the proposed method.Compared with conventional ultrasonic guided wave inspection methods,the proposed method can detect much smaller defect echoes usually obscured by noise that are difficult to detect with a lower excitation power and thus this study would be a good reference for pinhole defect detection.

Reduced order observer based identification of base isolated buildings

The objective of this study is to identify system parameters from the recorded response of base isolated buildings,such as USC hospital building,during the 1994 Northridge earthquake.Full state measurements are not available for identification.Additionally,the response is nonlinear due to the yielding of the lead-rubber bearings.Two new approaches are presented in this paper to solve the aforementioned problems.First,a reduced order observer is used to estimate the unmeasured states.Second,a least squares technique with time segments is developed to identify the piece-wise linear system properties.The observer is used to estimate the initial conditions needed for the time segmented identification.A series of equivalent linear system parameters are identified in different time segments.It is shown that the change in system parameters,such as frequencies and damping ratios,due to nonlinear behavior of the lead-rubber bearings,are reliably estimated using the presented technique.It is shown that the response was reduced due to yielding of the lead-rubber bearings and period lengthening.

Comprehensive Income （CI） Statement＇s Compliance With International Accounting Standard （IAS） 1 （Revised 2007 and 2011）： Evidence From Italian Listed Corporate Groups

The move towards international harmonization of accounting standards has dominated the work program of International Accounting Standards Board （IASB） in the past years. This paper aims to verify the compliance of the comprehensive income （CI） statement format with International Accounting Standard （IAS） 1-presentation of financial statements, which was revised in 2007. The changes introduced by the 2011 revision are also taken into account. For this purpose, this study analyzes the final annual financial statements approved in 2011 by the Italian companies whose shares belonged to the Italia Star segment of Financial Times and Stock Exchange （FTSE）. Given that IAS 1 provides little specific guidance about the presentation of line items and permits many alternative types of format, this paper focuses on information organization in the statement of CI in order to analyze the degree of heterogeneity of financial information. For achieving this goal, this study considers the following issues： （1） presentation of all items of income and expense in an overall statement or in two separate statements; （2） a detailed level of the content in terms of number of items between revenue and net income （NI）; （3） classification of expenses either by nature or by function; （4） number and type of intermediate margins; and （5） presentation of items of other comprehensive income （OCI） either before tax or net of tax. The results show some clear evidences. On the one hand, there is a high diversity in accounting practices, which makes it difficult for users to compare financial information across entities, highlighting the need to complete the joint project of the standards setters （IASB and Financial Accounting Standards Board （FASB）） on financial statement presentation. On the other hand, some alternative types of presentation （e.g., the tendency to split the CI statement into two statements rather than using an integrated solution, the prevalence to disaggregate the expenses by nature, etc.） are used by most of the entities of the sample possibly because of the influence of Italian accounting culture.

Application of Kinetic Models in Describing Soil Potassium Release Characteristics and Their Correlations with Potassium Extracted by Chemical Methods

Potassium （K） release characteristics in soil play a significant role in supplying available K. Information on K-release characteristics in soils of central Iran is limited. The objectives of this study were to determine K release characteristics and correlations of K release rate constants with K extracted by different chemical methods in surface soils of ten calcareous soils of central Iran. The kinetics of K release in the soils was determined by successive extraction with 0.01 mol L-1 CaC12 in a period of 2-2017 h at 25±1℃. Soil K was extracted by distilled water, 0.5 mol L-1 MgNO3, 0.002 mol L-1 SrC12, 0.1 mol L-1 BaC12, 0.01 mol L-1 CaC12, 1 mol L-1 NaC1, 1 mol L-1 boiling HNO3, 1 mol L-1 NH4OAC, Mehlich 1, 0.002 mol L-1 SrC12 ＋ 0.05 mol L-1 citric acid, and ammonium bicarbonate-diethylenetriamine pentaacetic acid （AB-DTPA）. A plot of cumulative amounts of K released showed a discontinuity in slope at 168 h. Thus, two equations were applied to two segments of the total reaction time （2-168 and 168-2 017 h）. Cumulative amounts of K released ranged from 55 to 299 mg kg-1 in 2-168 h and from 44 to 119 mg kg-1 in 168-2 017 h. Release kinetics of K in the two time segments conformed fairly well to parabolic diffusion, simplified Elovich, and power function models. There was a wide variation in the K release rate constants. Increasingly higher average concentrations of soil K were extracted by distilled water, Mehlich 1, SrC12, CaC12, SrC12 ＋ citric acid, AB-DTPA, MgNO3, NaCI, NH4OAc, BaCI2, and HNO3. Potassium release rate constants were significantly correlated with K extracted. The results of this study showed that information obtained from mathematical modeling in two reaction time segments can help to estimate the K-supplying power of soils.

A programmable gain amplifier with digitally assisted DC offset calibration for a direct-conversion WLAN receiver

This paper presents a programmable gain amplifier（PGA） circuit with a digitally assisted DC offset cancellation（DCOC） scheme for a direct conversion WLAN receiver.Implemented in a standard 0.13-μm CMOS process,the PGA occupies 0.39 mm2 die area and dissipates 6.5 mW power from a 1.2 V power supply.By using a single loop single digital-to-analog converter（DAC） mixed signal DC offset cancellation topology,the minimum DCOC settling time achieved is as short as 1.6μs with the PGA gain ranging from -8 to 54 dB in a 2 dB step.The DCOC loop utilizes a segmented DAC structure to lower the design complexity without sacrificing accuracy and a digital control algorithm to dynamically set the DCOC loop to fast or normal response mode,making the PGA circuit in compliance with the targeted WLAN specifications.