Wintertime suspended sediment simulation in the Huanghai and East China Seas

A simulation of suspended sediment movement relating to tidal and wave forcing during a winter monsoon in November 1983 in the Huanghai and East China Seas continental shelf is attempted by using the model describing the cohesive/non-cohesive sediment resus-pension generated by interactions between currents and waves.model simulation showed that sediment concentration was increased by resuspension at shallow depths during the strong storm conditions due to high bottom stress interacted between currents and waves. This result is in general agreement with observations in horizontal distribution of suspended sediment distribution. At three current meter mooring positions off the southern Shandong Peninsula resuspension occurred only at a depth of 22 m,nearest coastal position and at deeper parts at depths of 51 and 80 m wave-current interaction effects were not significant. It has shown that the present model simulation demonstrated the capability of reproduction of suspended sediment movement under wintertime extreme event reasonably well.

Time Slice Analysis Method Based on OTCA Used in fMRI Weak Signal Function Extraction

The original temporal clustering analysis (OTCA) is an effective technique for obtaining brain activation maps when the timing and location of the activation are completely unknown, but its deficiency of sensitivity is exposed in processing brain activation signal which is relatively weak. The time slice analysis method based on OTCA is proposed considering the weakness of the functional magnetic resonance imaging (fMRI) signal of the rat model. By dividing the stimulation period into several time slices and analyzing each slice to detect the activated pixels respectively after the background removal, the sensitivity is significantly improved. The inhibitory response in the hypothalamus after glucose loading is detected successfully with this method in the experiment on rat. Combined with the OTCA method, the time slice analysis method based on OTCA is effective on detecting when, where and which type of response will happen after stimulation, even if the fMRI signal is weak.

A seismic modeling analysis of wide and narrow 3D observation systems for channel sand bodies

The effect of the wide and narrow azimuth 3D observation systems on seismic imaging precision is becoming a hot area for studies of high precision 3D seismic acquisition methods in recent years. In this paper we utilize 3D physical seismic modeling experiments. A 3D channel sand body physical seismic model is constructed and two acquisition systems are designed with wide azimuth （16 lines） and narrow azimuth （8 lines） to model 3D seismic data acquisition and processing seismic work flows. From analysis of migrated time slice data with high quality and small size, we conclude that when the overlying layers are smooth and lateral velocities have little change, both wide and narrow azimuth observation systems in 3D acquisition can be used for obtaining high precision imaging and equivalent resolution of the channel sand body.

Simulation of Suspended Sediment in the Yellow and East China Seas

Described is an initial attempt to simulate the suspended sediment dynamics relating to tidal and wave forcing during summertime in June 1980 and August 1981 for the Yellow and East China Seas continental shelf. The cohesive/non-cohesive sediment resuspension and movement generated by the interaction between current and wave are modeled by use of ECOMSED and WAM Cycle 4. Model results are compared with observations in US-China Marine Sedimentation Dynamics Program performed for 1980-81 at off the Changjiang estuary. The main features of simulations show that suspended sediment concentrations during the summer decreased markedly offshore as observed during the simulation periods. As for some discrepancies for the mouth of the estuary with high river discharges, i.e., the Changjiang River, the model did not properly reproduce the over-mixing situation in the summer; thus distinct vertical concentration variation in this local region is not agreeable with observation. However, general dispersal patterns of suspended sediment movement seem to be agreeably reproduced for the nearshore shallow region. Some of the procedures of simulation and results are presented and discussed.

Wide/narrow azimuth acquisition footprints and their effects on seismic imaging

Acquisition footprint is a new concept to describe the seismic noise in three-dimensional seismic exploration and it is closely related to geometry and observation shuttering. At present, the study on acquisition footprints has become a hot spot. In partnership with the Dagang Oilfield, we used the channel sand body seismic physical model to study the characteristics of wide/narrow azimuth acquisition footprints and analyzed and compared the two types of footprints and their effects on target imaging. In addition, the footprints caused by data processing of the normal moveout offset （NMO） stretching aberration were discussed. These footprints are located only in the shallow or middle layer in the time slice, and possibly affect the imaging of shallow target layers, and have no influence on deep target imaging. Seismic physical modeling has its advantages in the study of acquisition footprints.

Study on the Igneous Rock Seismic Facies in Yingmai 32 Blocks

The western part of north Tarim Uplift underwent multi-stage tectonic movement and multiple stages of magmatism. Igneous rocks are associated with carbonate and buried deep. The seismic response characteristics of igneous rocks are similar in many respects to the seismic response characteristics of karst, making the identification and prediction of igneous rocks more difficult. This study compares the seismic reflection characteristics of igneous rocks. Set up three types of igneous rock seismic facies model penetration type, fracture type and central type. And it concluded that a time-slice, coherence analysis, analysis of the seismic properties of the layers and the method of three-dimensional engraving to identify the igneous rocks. This method has been applied to the identification and prediction of carbonate rock buried and hill igneous rocks in the north Tarim basin YingMaiLi region and has achieved good results.