High spectral efficiency is essential in design of multimedia communication systems such as L-band mobile in addition to various requirements of transmission quality. Time-interleaved A/D converter （TI-ADC） is an ef...High spectral efficiency is essential in design of multimedia communication systems such as L-band mobile in addition to various requirements of transmission quality. Time-interleaved A/D converter （TI-ADC） is an effective candidate to implement wide-band ADC with relatively slow circuits accounting for digital spectrum management. However, practical performance of TI-ADC is largely limited because of mismatches between different channels originated from manufacturing process variations. In this paper, a blind adaptive method is proposed to correct gain mismatch errors in TI-ADC, and it is verified through simulations on a two-channel TI-ADC. In proposed method, gain mismatch error is estimated and corrected in an adaptive scheme. Proposed compensated T1-ADC architecture is structurally very simple and hence suitable for realiza- tion in integrated circuits. Besides, proposed digital compensation algorithm not only is computationally efficient but also provides an improvement of 32.7 dB in the performance of two-channel TI ADC.展开更多
Wide area damping controller(WADC) is usually utilized to damp interarea low frequency oscillation in power system. However, conventional WADC design method neglects the influence of signal transmission delay and damp...Wide area damping controller(WADC) is usually utilized to damp interarea low frequency oscillation in power system. However, conventional WADC design method neglects the influence of signal transmission delay and damping performance of WADC designed by the conventional method may deteriorate or even has no effect when signal transmission delay is beyond delay margin, an index that denotes delay endurance degree of power system. Therefore, a new design method for WADC under the condition of expected damping factor and required signal transmission delay is presented in this work. An improved delay margin with less conservatism is derived by adopting a new Lyapunov-Krasovskii function and more compact bounding technique on the derivative of Lyapunov-Krasovskii functional. The improved delay margin, which constructs the correlation of damping factor and signal transmission delay, can be used to design WADC. WADC designed by the proposed method can ensure that power system satisfies expected damping factor when WADC input signal is delayed within delay margin. Satisfactory test results demonstrate the effectiveness of the proposed method.展开更多
Acquisition footprint is a new concept to describe the seismic noise in three-dimensional seismic exploration and it is closely related to geometry and observation shuttering. At present, the study on acquisition foot...Acquisition footprint is a new concept to describe the seismic noise in three-dimensional seismic exploration and it is closely related to geometry and observation shuttering. At present, the study on acquisition footprints has become a hot spot. In partnership with the Dagang Oilfield, we used the channel sand body seismic physical model to study the characteristics of wide/narrow azimuth acquisition footprints and analyzed and compared the two types of footprints and their effects on target imaging. In addition, the footprints caused by data processing of the normal moveout offset （NMO） stretching aberration were discussed. These footprints are located only in the shallow or middle layer in the time slice, and possibly affect the imaging of shallow target layers, and have no influence on deep target imaging. Seismic physical modeling has its advantages in the study of acquisition footprints.展开更多
Matching features such as curve segments in stereo images play a very important role in scene recomtruction. In this paper, a stereo matching algorithm for the trajectories composed of time stamped points is proposed....Matching features such as curve segments in stereo images play a very important role in scene recomtruction. In this paper, a stereo matching algorithm for the trajectories composed of time stamped points is proposed. Based on time stamped points, planar curve match measurements are given first, such as time constraint, cross-ratio invariant constraint and eplpolar geometry constraint; then, a trajectory matching method is proposed based on epipolar geometry constraint and cross-ratio invariant constraint. In order to match the planar curve segments projected by perspective projection system, the curve start time and end time are selected first to prepare match candidates. Then, the epipolar equation is used to discard the unmatched curve segment candidates. At last, a cross ratio invariant constxaint is used to find the most matched curve segments. If their match measurement is higher than the specialized threshold, a candidate with the least cross ratio difference is then selected as the match result; otherwise, no match is found. Unlike the conventional planar curve segments matching algorithm, this paper presents a weakly calibrated binocular stereo vision system which is based on wide baseline. The stamped points are obtained by targets detecting method of flying objects from image sequences. Due to wide baseline, there must exist the projection not in epipolar monotonic order or the curve segments located in very short distance and keeping the epipolar monotonic order. By using the method mentioned above, experiments are made to match planar curve segments not only in epipolar monotonic order but also not in epipolar monotonic order. The results show that the performance of our curve matching algorithm is effective for matching the arc-like planar trajectories composed of time stamped points.展开更多
Space-time coding radar has been recently proposed and investigated.It is a radar framework which can perform transmit beamforming at the receiver.However,the range resolution decreases when the number of the transmit...Space-time coding radar has been recently proposed and investigated.It is a radar framework which can perform transmit beamforming at the receiver.However,the range resolution decreases when the number of the transmit element increases.A subarray-based space-time coding(sub-STC)radar is explored to alleviate the range resolution reduction.For the proposed radar configuration,an identical waveform is transmitted and it introduces a small time offset in different subarrays.The multidimensional ambiguity function of sub-STC radar is defined by considering resolutions in multiple domains including the range,Doppler,angle and probing direction.Analyses on properties of the multi-dimensional ambiguity function of the sub-STC radar with regard to the spatial coverage,resolution performance and low sidelobes are also given.Results reveal that the range resolution and low sidelobes performance are improved with the proposed approach.展开更多
基金Iran’s Telecommunication Research Center(ITRC)(No.500/3653)
文摘High spectral efficiency is essential in design of multimedia communication systems such as L-band mobile in addition to various requirements of transmission quality. Time-interleaved A/D converter （TI-ADC） is an effective candidate to implement wide-band ADC with relatively slow circuits accounting for digital spectrum management. However, practical performance of TI-ADC is largely limited because of mismatches between different channels originated from manufacturing process variations. In this paper, a blind adaptive method is proposed to correct gain mismatch errors in TI-ADC, and it is verified through simulations on a two-channel TI-ADC. In proposed method, gain mismatch error is estimated and corrected in an adaptive scheme. Proposed compensated T1-ADC architecture is structurally very simple and hence suitable for realiza- tion in integrated circuits. Besides, proposed digital compensation algorithm not only is computationally efficient but also provides an improvement of 32.7 dB in the performance of two-channel TI ADC.
基金Project(51007042) supported by the National Natural Science Foundation of China
文摘Wide area damping controller(WADC) is usually utilized to damp interarea low frequency oscillation in power system. However, conventional WADC design method neglects the influence of signal transmission delay and damping performance of WADC designed by the conventional method may deteriorate or even has no effect when signal transmission delay is beyond delay margin, an index that denotes delay endurance degree of power system. Therefore, a new design method for WADC under the condition of expected damping factor and required signal transmission delay is presented in this work. An improved delay margin with less conservatism is derived by adopting a new Lyapunov-Krasovskii function and more compact bounding technique on the derivative of Lyapunov-Krasovskii functional. The improved delay margin, which constructs the correlation of damping factor and signal transmission delay, can be used to design WADC. WADC designed by the proposed method can ensure that power system satisfies expected damping factor when WADC input signal is delayed within delay margin. Satisfactory test results demonstrate the effectiveness of the proposed method.
基金Heterogeneous formation geophysical response characteristics (973 Program, subject number: 2007CB209601)Continental reservoir seismic physical model (CNPC Fundamental Research Projects, subject number: 06A10102)
文摘Acquisition footprint is a new concept to describe the seismic noise in three-dimensional seismic exploration and it is closely related to geometry and observation shuttering. At present, the study on acquisition footprints has become a hot spot. In partnership with the Dagang Oilfield, we used the channel sand body seismic physical model to study the characteristics of wide/narrow azimuth acquisition footprints and analyzed and compared the two types of footprints and their effects on target imaging. In addition, the footprints caused by data processing of the normal moveout offset （NMO） stretching aberration were discussed. These footprints are located only in the shallow or middle layer in the time slice, and possibly affect the imaging of shallow target layers, and have no influence on deep target imaging. Seismic physical modeling has its advantages in the study of acquisition footprints.
基金The National Natural Science Founda-tion of China (No.60135020) and the National Defence Key Pre-research Project of China (No.413010701-3)
文摘Matching features such as curve segments in stereo images play a very important role in scene recomtruction. In this paper, a stereo matching algorithm for the trajectories composed of time stamped points is proposed. Based on time stamped points, planar curve match measurements are given first, such as time constraint, cross-ratio invariant constraint and eplpolar geometry constraint; then, a trajectory matching method is proposed based on epipolar geometry constraint and cross-ratio invariant constraint. In order to match the planar curve segments projected by perspective projection system, the curve start time and end time are selected first to prepare match candidates. Then, the epipolar equation is used to discard the unmatched curve segment candidates. At last, a cross ratio invariant constxaint is used to find the most matched curve segments. If their match measurement is higher than the specialized threshold, a candidate with the least cross ratio difference is then selected as the match result; otherwise, no match is found. Unlike the conventional planar curve segments matching algorithm, this paper presents a weakly calibrated binocular stereo vision system which is based on wide baseline. The stamped points are obtained by targets detecting method of flying objects from image sequences. Due to wide baseline, there must exist the projection not in epipolar monotonic order or the curve segments located in very short distance and keeping the epipolar monotonic order. By using the method mentioned above, experiments are made to match planar curve segments not only in epipolar monotonic order but also not in epipolar monotonic order. The results show that the performance of our curve matching algorithm is effective for matching the arc-like planar trajectories composed of time stamped points.
基金supported by the National Key Research and Development Program of China(2016YFE0200400)the Key R&D Program of Shaanxi Province(2017KW-ZD-12)+1 种基金the Postdoctoral Science Foundation of Shaanxi Provincethe Nature Science Foundation of Shaanxi Province
文摘Space-time coding radar has been recently proposed and investigated.It is a radar framework which can perform transmit beamforming at the receiver.However,the range resolution decreases when the number of the transmit element increases.A subarray-based space-time coding(sub-STC)radar is explored to alleviate the range resolution reduction.For the proposed radar configuration,an identical waveform is transmitted and it introduces a small time offset in different subarrays.The multidimensional ambiguity function of sub-STC radar is defined by considering resolutions in multiple domains including the range,Doppler,angle and probing direction.Analyses on properties of the multi-dimensional ambiguity function of the sub-STC radar with regard to the spatial coverage,resolution performance and low sidelobes are also given.Results reveal that the range resolution and low sidelobes performance are improved with the proposed approach.
