ONE-DIMENSIONAL CONSOLIDATION OF LAYERED SOILS WITH IMPEDED BOUNDARIES UNDER TIME-DEPENDENT LOADINGS

On the basis of Terzaghi's one-dimensional consolidation theory, the variation of effective stress ratio in layered saturated soils with impeded boundaries under time-dependent loading was studied. By the method of Laplace transform, the solution was presented. Influences of different kinds of cyclic loadings and impeded boundaries conditions were discussed. Through numerical inversion of Laplace transform, useful illustrations were given considering several common time-dependent loadings. Pervious or impervious boundary condition is just the special case of the problem considered here. Compared with average index method,the results from the method illustrated are more accurate.

Modified DS np Chart Using Generalized Multiple Dependent State Sampling under Time Truncated Life Test

This study presents the design of a modified attributed control chart based on a double sampling(DS)np chart applied in combination with generalized multiple dependent state(GMDS)sampling to monitor the mean life of the product based on the time truncated life test employing theWeibull distribution.The control chart developed supports the examination of the mean lifespan variation for a particular product in the process of manufacturing.Three control limit levels are used:the warning control limit,inner control limit,and outer control limit.Together,they enhance the capability for variation detection.A genetic algorithm can be used for optimization during the in-control process,whereby the optimal parameters can be established for the proposed control chart.The control chart performance is assessed using the average run length,while the influence of the model parameters upon the control chart solution is assessed via sensitivity analysis based on an orthogonal experimental design withmultiple linear regression.A comparative study was conducted based on the out-of-control average run length,in which the developed control chart offered greater sensitivity in the detection of process shifts while making use of smaller samples on average than is the case for existing control charts.Finally,to exhibit the utility of the developed control chart,this paper presents its application using simulated data with parameters drawn from the real set of data.

Thermomechanical Dynamics (TMD) and Bifurcation-Integration Solutions in Nonlinear Differential Equations with Time-Dependent Coefficients

The new independent solutions of the nonlinear differential equation with time-dependent coefficients (NDE-TC) are discussed, for the first time, by employing experimental device called a drinking bird whose simple back-and-forth motion develops into water drinking motion. The solution to a drinking bird equation of motion manifests itself the transition from thermodynamic equilibrium to nonequilibrium irreversible states. The independent solution signifying a nonequilibrium thermal state seems to be constructed as if two independent bifurcation solutions are synthesized, and so, the solution is tentatively termed as the bifurcation-integration solution. The bifurcation-integration solution expresses the transition from mechanical and thermodynamic equilibrium to a nonequilibrium irreversible state, which is explicitly shown by the nonlinear differential equation with time-dependent coefficients (NDE-TC). The analysis established a new theoretical approach to nonequilibrium irreversible states, thermomechanical dynamics (TMD). The TMD method enables one to obtain thermodynamically consistent and time-dependent progresses of thermodynamic quantities, by employing the bifurcation-integration solutions of NDE-TC. We hope that the basic properties of bifurcation-integration solutions will be studied and investigated further in mathematics, physics, chemistry and nonlinear sciences in general.

Modeling of the loading path dependent magnetomechanical behavior of Galfenol alloy

The magnetomechanical behavior of single-crystal Galfenol alloy was found to be strongly dependent on the loading paths. An energy-based anisotropic domain rotation model, assuming that the interaction between domains can be ignored and the probability of the magnetic moment pointing along a particular direction is related to the free energy along this direction, is used to simulate the magnetostriction versus magnetic field and stress curve and to track the magnetic domain motion trail. The main reason for loading path dependent effect is the rotation/flipping of the magnetic domains under different loading paths. The effect of loading and unloading paths on 90° magnetic domain motion was studied by choosing different loading and unloading state and paths. The results show that prior loading magnetic field can make the 90° magnetic domains flip to the directions of 45°domains because the magnetic field is the driving force to make the domains rotate, and the final loading state and the loading path both have great influence on the motion of 90° magnetic domains.

Dependence of loading time on control parameters in a standard vapour-oaded magneto-optical trap

Loading time is one of the most important dynamic characteristics of a magneto-optical trap. In this paper, we primarily report on a detailed experimental study of the effects of some magneto-optical trap control parameters on loading time, including the background vacuum pressure, the magnetic field gradient, and the intensities of trapping and repumping lasers. We compare the results with previous theoretical and experimental results, and give qualitative analysis. These experimental investigations offer some useful guidelines to coatrol the loading time of magneto-optical traps. The controllable loading time achieved is helpful to enhance the signal-to-noise ratio of photoassociation spectroscopy, which is remarkably improved from 7 to 28.6.

Non-harmonic resonance of viscoelastic structures subjected to time-dependent exponentially decreasing transverse distributed loads

In this paper,the non-harmonic resonance of Bernoulli viscoelastic beams,Kirchhoff viscoelastic plates,Timoshenko viscoelastic beams,and Mindlin viscoelastic plates subjected to time-dependent exponentially decreasing transverse distributed load is investigated for the first time.The constitutive equations are expressed utilizing Boltzmann integral law with a constant bulk modulus.The displacement vector is approximated by employing the separation of variables method.The Laplace transformation is used to transfer equations from the time domain to the Laplace domain and vice versa.The novel point of the proposed method is to express,prove and calculate the critical time in which the displacement will be several times the displacement at time zero.In addition,this new method calculates the maximum deflection at the critical time,explicitly and exactly,without any need to follow the time-displacement curve with a low computational cost.Additionally,the proposed method introduces the critical range of time so that the responses are greater than the responses at time zero.

INFLUENCE OF TEMPERATURE-DEPENDENT PROPERTIES ON TEMPERATURE RESPONSE AND OPTIMUM DESIGN OF C/M FGMS UNDER THERMAL CYCLIC LOADING

The influence of temperature-dependent properties on temperature response and optimum design of newly developed ceramic-metal functionally graded materials under cyclic thermal loading and high temperature gradient environment is studied. The thermal conductivity of the material is considered to be dependent on the temperature. In this paper, the temperature response of the material is calculated using a nonlinear finite element method. Emphasis is placed on the influence of temperatue-dependent properties on the thermal response and insulation property of the material render the different graded compositional distributions and different heat flux magnitudes. Through the analysis, it is suggested that the influence of temperature-dependent properties can not be neglected in the temperature response analysis and the optimum design process of the material must be based on the temperature-dependent temperature analysis theory.

INFLUENCE OF TEMPERATURE-DEPENDENT PROPERTIES ON THERMAL STRESSES RESPONSE AND OPTIMUM DESIGN OF C/M FGMS UNDER THERMAL CYCLIC LOADING

The influence of temperature-dependent properties on thermal stresses response and optimum design of newly developed ceramic-metal functionally graded materials under cyclic thermal loaning and high temperature gradient environment is studied. The thermal conductivity of material is considered to be dependent on the temperature. In this paper, the thermal stresses response of the material is calculated rising a nonlinear finite element method. Emphasis is placed on the influence of temperature-dependent properties on the thermal stresses response characteristics, the thermal stresses relaxation property and the thermal stresses history under the different graded compositional distributions and different heat flux magnitudes. Through tile analysis. it is suggested that the influence of temperature-dependent properties can not be neglected In the thermal stresses response analysis and the optimum design process of the material must be based on the temperature-dependent thermo-elastic-plastic theory.

Time Dependent Ginzburg-Landau方程的Weierstrass椭圆函数解

将文[22]中提出的求解非线性演化方程的Weierstrass椭圆函数解的一个新方法应用于Time De-pendent Ginzburg-Landau方程,获得了该方程的一些新的双周期解,并在退化情形下得到了一些新的精确孤波解.

Spin-Unrestricted Multi-Configuration Time-Dependent Hartree Fock Theory

Based on spin-unrestricted hartree fock theory, we present the spin unrestricted multi- configuration time dependent hartree lock theory （UMCTDHF） to describe the electron correlation dynamics of systems interacting with laser field. The positive spin orbitals and the negative spin orbitals are propagated in their own subspace respectively. The spin orbital in the spin-down subspace acts with that in the spin-up subspace by the reduced density matrix and mean field operator. The ground energy is acquired by propagating the trial wave function in the imaginary time by using spin-restricted MCTDHF （RMCTDHF） and UMCTDHF respectively. Then the ionization probabilities and the electrons energies are calculated by using RMCTDHF and UMCTDHF when the laser field is present. The ionization probability calculated with UMCTDHF agrees with the previous theoretical reports very well. The UMCTDHF method is accurate and applicable for open shell system beyond the capability of the RMCTDHF method.

Multi-type ant system algorithm for the time dependent vehicle routing problem with time windows

The time dependent vehicle routing problem with time windows（TDVRPTW） is considered. A multi-type ant system（MTAS） algorithm hybridized with the ant colony system（ACS）and the max-min ant system（MMAS） algorithms is proposed. This combination absorbs the merits of the two algorithms in solutions construction and optimization separately. In order to improve the efficiency of the insertion procedure, a nearest neighbor selection（NNS） mechanism, an insertion local search procedure and a local optimization procedure are specified in detail. And in order to find a balance between good scouting performance and fast convergence rate, an adaptive pheromone updating strategy is proposed in the MTAS. Computational results confirm the MTAS algorithm＇s good performance with all these strategies on classic vehicle routing problem with time windows（VRPTW） benchmark instances and the TDVRPTW instances, and some better results especially for the number of vehicles and travel times of the best solutions are obtained in comparison with the previous research.

Uniaxial Time-Dependent Ratcheting of SS304 Stainless Steel at High Temperatures

The uniaxial time-dependent strain cyclic behaviors and ratcheting of SS304 stainless steel were studied at high temperatures （350 ℃ and 700 ℃）. The effects of straining and stressing rates, holding time at the peak and/or valley of each cycle in addition to ambient temperature on the cyclic softening/hardening behavior and ratcheting of the material were discussed. It can be seen from experimental results that the material presents remarkable time dependence at 700 ℃, and the ratcheting strain depends greatly on the stressing rate, holding time and ambient temperature. Some significant conclusions are obtained, which are useful to build a constitutive model describiog the time-dependent cyclic deformation of the material.

Time Dependent Chloride Diffusion Coefficient in Concrete

In order to study how to correctly apply the two different time dependencies to service life prediction models, the definition of parameters in the time dependent equation using the long-term test method and the short-term test method, and its relationship were discussed. The experimental results show that, as the two time dependencies have different meanings, they have different manners when handled in service life prediction models. Time dependency of chloride diffusion coefficients in concrete was obtained by fitting experimental data. A large number of accurate experimental data were required to fit the formula of time dependency to ensure the accuracy of service life prediction model.

A time-dependent measuring system for welding deformation

In this paper the establishment and application of a time dependent measuring system for welding deformation are presented which is established with high quality sensors shielded from strong welding interference. By using this system, vertical and horizontal displacements of the high temperature area are surveyed at the same time. And this system is also used for monitoring and controlling the deformation of real welded structures.

Effects of time lag and stress loading rate on permeability in low permeability reservoirs

In order to study the effect of time lag and stress loading rates on rock deformation,the conventional stepped stress loading mode was changed into a continuous mode to investigate the effect of effective pressure on permeability and porosity.The time lag effect of rock deformation illustrating the relationship between changes in permeability and steady time was studied.Permeability reduction ratios were measured under different stress loading rates which were achieved by different pump rate settings.The results show that permeability and porosity gradually decrease with increases in effective pressure.Permeability at high effective pressure attains stability quickly.Steady times at low effective pressure are very long.Reduction in permeability at lower stress loading rates is small,while,in contrast,it is large at high stress loading rates.

Spectral Method for Solving Time Dependent Flow of Upper-Convected Maxwell Fluid in Tube

The ti me dependent flow of upper-convected Maxwell fluid in a horizontal circular pip e is studied by spectral method. The time dependent problem is mathematically re duced to a partial differential equation of second order. By using spectral meth od the partial differential equation can be reduced to a system of ordinary diff erential equations for different terms of Chebyshev polynomials approximations. The ordinary differential equations are solved by Laplace transform and the eige nvalue method that leads to an analytical form of the solutions.

Load Dependent Series-Parallel Systems with Common Bus Performance Sharing Mechanism

A series-parallel system was proposed with common bus performance sharing in which the performance and failure rate of the element depended on the load it was carrying. In such a system,the surplus performance of a sub-system can be transmitted to other deficient sub-systems. The transmission capacity of the common bus performance sharing mechanism is a random variable. Effects of load on element performance and failure rate were considered in this paper. A reliability evaluation algorithm based on the universal generating function technique was suggested. Numerical experiments were conducted to illustrate the algorithm.

Exact Distributions of Waiting Time Problems of Mixed Frequencies and Runs in Markov Dependent Trials

We study waiting time problems for first-order Markov dependent trials via conditional probability generating functions. Our models involve α frequency cells and β run cells with prescribed quotas and an additional γ slack cells without quotas. For any given and , in our Model I we determine the waiting time until at least frequency cells and at least run cells reach their quotas. For any given τ ≤ α + β, in our Model II we determine the waiting time until τ cells reach their quotas. Computer algorithms are developed to calculate the distributions, expectations and standard deviations of the waiting time random variables of the two models. Numerical results demonstrate the efficiency of the algorithms.

Numerical investigation into pillar failure induced by time-dependent skin degradation

This paper focuses on the instability mechanism of an isolated pillar, caused by time-dependent skin degradation and strength heterogeneity. The time-dependent skin degradation is simulated with a non-linear rheological model capable of simulating tertiary creep, whereby two different pillar failure cases are investigated. The first case is of an isolated pillar in a deep hard rock underground mine and subjected to high stresses. The results show that pillar degradation is limited to the regions near the surface or the skin until two months after ore extraction. Afterwards degradation starts to extend deeper into the pillar, eventually leaving a highly-stressed pillar core due to stress transfer from the failed skin.Rockburst potential indices show that the risk increases exponentially at the core as time goes by. It is then demonstrated that the progressive skin degradation cannot be simulated with conventional strain-softening model assuming brittle failure. The parametric study with respect to the degree of heterogeneity reveals that heterogeneity is key to the occurrence of progressive skin degradation. The second case investigated in this study is pillar failure taking place in a very long period. Such failure becomes significantly important when assessing the risk for ground subsidence caused by pillar collapse in an abandoned mine. The analysis results demonstrate that the employed non-linear rheological model can simulate gradual skin degradation taking place over several hundred years. The percentage of damage zone volume within the pillar is merely 1% after a lapse of one days and increases to 50% after one hundred years, indicating a high risk for pillar collapse in the long term. The vertical displacements within the pillar also indicate the risk of subsidence. The proposed method is suitable for evaluating the risk of ground surface subsidence above an abandoned mine.

A Novel Multiple Dependent State Sampling Plan Based on Time Truncated Life Tests Using Mean Lifetime

The design of a new adaptive version of the multiple dependent state(AMDS)sampling plan is presented based on the time truncated life test under the Weibull distribution.We achieved the proposed sampling plan by applying the concept of the double sampling plan and existing multiple dependent state sampling plans.A warning sign for acceptance number was proposed to increase the probability of current lot acceptance.The optimal plan parameters were determined simultaneously with nonlinear optimization problems under the producer’s risk and consumer’s risk.A simulation study was presented to support the proposed sampling plan.A comparison between the proposed and existing sampling plans,namely multiple dependent state(MDS)sampling plans and a modified multiple dependent state(MMDS)sampling plan,was considered under the average sampling number and operating characteristic curve values.In addition,the use of two real datasets demonstrated the practicality and usefulness of the proposed sampling plan.The results indicated that the proposed plan is more flexible and efficient in terms of the average sample number compared to the existing MDS and MMDS sampling plans.