PHASE EXTENSION AND STRUCTURE ANALYSIS BY THE MAXIMUM ENTROPY METHOD

Excellent results are obtained in structure analysis with jew phases of structure factors by the maximum-entropy method (MEM) for CaGaN PbCO3 and ReBe22 single crystals. The computation time and memory space are minimized by symmetry operations so that structure analysis by the MEM can be carried out with a personal computer.

Engineering Geological Zoning of Soft-Soil Foundation Based on Combination Weighting and Extension Methods

Different criteria and factors are used in different methods of soft soil foundation settlement calculation and engineering geological zoning.The methods used are not universally suitable for complex geological environments.The post-construction settlement of soft soil foundations are especially large and difficult to calculate.In addition,there are many deficiencies in the current methods used for engineering geological zoning.Focusing on the need of establishing engineering geological zoning for areas with soft soil foundations in the Tianjin Marine Economic Area,combination weighting and extension methods were introduced.An evaluation model for the settlement of soft soil foundations was established using multiple factors and large amounts of data.This evaluation model is accurate and objective for delineating engineering geological zoning.These methods eliminate deficiencies by considering both objective and subjective factors,and help obtain an objective and accurate result.

The Extension Methods and Fecision-making Analysis on the Planting Dtructure of Dlope Garmland in Northern Shaanxi

Based on the resent research about the planting structure of slope farmland in northern Shaanxi,in order to increase the native's income,we use the theory of the extension methods to analyze the planting structure of slope farmland,so that we can get the extensive strategy,and put them into use for planting of slope farmland to make the native's income higher.

Dynamic Coupling Analysis of Semisubmersible Platform Float-over Method for Docking Case

In this paper,the multi-body coupled dynamic characteristics of a semisubmersible platform and an HYSY 229 barge were investigated.First,coupled hydrodynamic analysis of the HYSY 229 barge and the semisubmersible platform was performed.Relevant hydrodynamic parameters were obtained using the retardation function method of three-dimensional frequency-domain potential flow theory.The results of the hydrodynamic analysis were highly consistent with the test findings,verifying the accuracy of the multifloating hydrodynamic coupling analysis,and key hydrodynamic parameters were solved for different water depths and the coupling effect.According to the obtained results,the hydrodynamic influence was the largest in shallow waters when the coupling effect was considered.Furthermore,the coupled motion equation combined with viscous damping,fender system,and mooring system was established,and the hydrodynamics,floating body motion,and dynamic response of the fender system were analyzed.Motion analysis revealed good agreement among the surge,sway,and yaw motions of the two floating bodies.However,when the wave period reached 10 s,the motion of the two floating bodies showed severe shock,and a relative motion was also observed.Therefore,excessive constraints should be added between the two floating bodies during construction to ensure construction safety.The numerical analysis and model test results of the semisubmersible platform and HYSY 229 barge at a water depth of 42 m and sea conditions of 0°,45°,and 90° were in good agreement,and the error was less than 5%.The maximum movement of the HYSY 229 barge reached 2.61 m in the sway direction,whereas that of the semisubmersible platform was 2.11 m.During construction,excessive constraints should be added between the two floating bodies to limit their relative movement and ensure construction safety.

THE ACCELERATED SEARCH-EXTENSION METHOD FOR COMPUTING MULTIPLE SOLUTIONS OF SEMILINEAR PDEs

In this paper, we propose an accelerated search-extension method （ASEM） based on the interpolated coefficient finite element method, the search-extension method （SEM） and the two-grid method to obtain the multiple solutions for semilinear elliptic equations. This strategy is not only successfully implemented to obtain multiple solutions for a class of semilinear elliptic boundary value problems, but also reduces the expensive computation greatly. The numerical results in I-D and 2-D cases will show the efficiency of our approach.

Time-Domain Analysis of Body Freedom Flutter Based on 6DOF Equation

The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is prone to body freedomflutter(BFF),which is a result of coupling of the rigid body short-periodmodewith 1st wing bendingmode.Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law.Instead of using the rigid body mode,this work simulates the rigid bodymotion of the model by using the six-degree-of-freedom(6DOF)equation.A dynamicmesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed.An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation(CFD/CSD/6DOF)-based BFF prediction method is proposed.Firstly,the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model.Based on this state,the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of themodel.Then combinedwith the variable stiffnessmethod,the critical flutter point of the model is obtained.This method is applied to the BFF calculation of a flyingwing model.The calculation results of the BFF characteristics of the model agree well with those fromthe modalmethod andNastran software.Finally,the method is used to analyze the influence factors of BFF.The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center ofmass forward or increasing the pitch inertia.

On Relations between the General Recurrence Formula of the Extension of Murase-Newton’s Method (the Extension of Tsuchikura*-Horiguchi’s Method) and Horner’s Method

In 1673, Yoshimasu Murase made a cubic equation to obtain the thickness of a hearth. He introduced two kinds of recurrence formulas of square and the deformation (Ref.[1]). We find that the three formulas lead to the extension of Newton-Raphson’s method and Horner’s method at the same time. This shows originality of Japanese native mathematics (Wasan) in the Edo era (1600- 1867). Suzuki (Ref.[2]) estimates Murase to be a rare mathematician in not only the history of Wasan but also the history of mathematics in the world. Section 1 introduces Murase’s three solutions of the cubic equation of the hearth. Section 2 explains the Horner’s method. We give the generalization of three formulas and the relation between these formulas and Horner’s method. Section 3 gives definitions of Murase-Newton’s method (Tsuchikura-Horiguchi’s method), general recurrence formula of Murase-Newton’s method (Tsuchikura-Horiguchi’s method), and general recurrence formula of the extension of Murase-Newton’s method (the extension of Tsuchikura-Horiguchi’s method) concerning n-degree polynomial equation. Section 4 is contents of the title of this paper.

THE APPLICATION AND EXTENSION OF SACHS METHOD

In this paper,we present the simplification of Sachs formulas for the measurement and calculation of the residual stresses of the cylinder only with the plane stresses. Furthermore, we present the method for the measurement and calculation of the residual stresses of the cylinder not only with the finite length but with the longitudinal stress. These can be applied to the investigation on the residual stresses of the autofretted gun tube.

Comparison of Classical Method, Extension Principle and α-Cuts and Interval Arithmetic Method in Solving System of Fuzzy Linear Equations

The system of linear equations plays a vital role in real life problems such as optimization, economics, and engineering. The parameters of the system of linear equations are modeled by taking the experimental or observation data. So the parameters of the system actually contain uncertainty rather than the crisp one. The uncertainties may be considered in term of interval or fuzzy numbers. In this paper, a detailed study of three solution techniques namely Classical Method, Extension Principle method and α-cuts and interval Arithmetic Method to solve the system of fuzzy linear equations has been done. Appropriate applications are given to illustrate each technique. Then we discuss the comparison of the different methods numerically and graphically.

A 1D time-domain method for in-plane wave motions in a layered half-space

A 1D finite element method in time domain is developed in this paper and applied to calculate in-plane wave motions of free field exited by SV or P wave oblique incidence in an elastic layered half-space. First, the layered half-space is discretized on the basis of the propagation characteristic of elastic wave according to the Snell law. Then, the finite element method with lumped mass and the central difference method are incorporated to establish 2D wave motion equations, which can be transformed into 1D equations by discretization principle and explicit finite element method. By solving the 1D equations, the displacements of nodes in any vertical line can be obtained, and the wave motions in layered half-space are finally determined based on the characteristic of traveling wave. Both the theoretical analysis and the numerical results demonstrate that the proposed method has high accuracy and good stability.

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.

EXTENSIONS OF SOME INEQUALITIES

By using a simple analytic method the following inequalities are proved:(b x+y -a x+y )/(b x-a x)≥[(x+y)/x][(a+b)/2] y, for 0<a<b,x≥1,y>0,x+y≥2; (b x+y -a x+y )/(b x-a x)<[(x+y)/x][(a+b)/2] y, for 0<a<b,0<x<1,y>0,x+y≤2. These inequalities are the extensions of inequalities of Qi Feng, Xu Senlin and Zheng Lin. And a conjection of Qi Feng is proved not true.

Terahertz Time-Domain Spectroscopy method for optical parameter extraction of plastic materials

A method for extracting optical parameters of plastics materials based on terahertz time domain spectroscopy is presented. The transmission-type Terahertz Time-Domain Spectroscopy(THz TDS) system is adopted to detect the refractive index and extinction coefficient on different plastic materials. Then the corresponding spectral information is obtained by Fourier transform of the terahertz time domain waveform of the sampling points, including the corresponding amplitude and phase information of the waveform. The optical parameter extraction model is built. By using the simplex optimization method, the curves of the refractive index and extinction coefficient for the plastic material are obtained. The experimental samples are made of different plastic parallel plate materials. The experimental results show that the optimization of optical parameters can improve their extraction accuracy, and the error of refractive index is ±0.005. Extraction technology with the simplex optimization method of optical parameter based on THz TDS can help to extract the optical parameters of engineering plastics. It is of great significance for the research of terahertz nondestructive testing.

Research on Extension Evaluation of Rural Road Maintenance Quality Based on Game Theory

The importance of rural highway maintenance is self-evident, and it is also a basic work of the highway operation department. Selecting an appropriate evaluation method can timely and accurately find the pavement diseases, and improve the timeliness of pavement repair. To improve the accuracy of pavement quality comprehensive evaluation, based on the game theory, the improved extension evaluation method was combined with subjective and objective weight determination methods in this paper, to propose a comprehensive weight determination method with a good operability. The results show that the improved extension evaluation method provides a feasible scheme for rural highway maintenance quality evaluation

Using a Time-domain Higher-order Boundary Element Method to Simulate Wave and Current Diffraction from a 3-D Body

To study wave-current actions on 3-D bodies a time-domain numerical model was established using a higher-order boundary element method(HOBEM).By assuming small flow velocities,the velocity potential could be expressed for linear and higher order components by perturbation expansion.A 4th-order Runge-Kutta method was applied for time marching.An artificial damping layer was adopted at the outer zone of the free surface mesh to dissipate scattering waves.Validation of the numerical method was carried out on run-up,wave exciting forces,and mean drift forces for wave-currents acting on a bottom-mounted vertical cylinder.The results were in close agreement with the results of a frequency-domain method and a published time-domain method.The model was then applied to compute wave-current forces and run-up on a Seastar mini tension-leg platform.

Stochastic transient analysis of thermal stresses in solids by explicit time-domain method

Stochastic heat conduction and thermal stress analysis of structures has received considerable attention in recent years.The propagation of uncertain thermal environments will lead to stochastic variations in temperature fields and thermal stresses.Therefore,it is reasonable to consider the variability of thermal environments while conducting thermal analysis.However,for ambient thermal excitations,only stationary random processes have been investigated thus far.In this study,the highly efficient explicit time-domain method(ETDM)is proposed for the analysis of non-stationary stochastic transient heat conduction and thermal stress problems.The explicit time-domain expressions of thermal responses are first constructed for a thermoelastic body.Then the statistical moments of thermal displacements and stresses can be directly obtained based on the explicit expressions of thermal responses.A numerical example involving non-stationary stochastic internal heat generation rate is investigated.The accuracy and efficiency of the proposed method are validated by comparison with the Monte-Carlo simulation.

Investigation of three-pulse photon echo in thick crystal using finite-difference time-domain method

This paper investigates the phenomenon of three-pulse photon echo in thick rare-earth ions doped crystal whose thickness is far larger than 0.002 cm which is adopted in previous works.The influence of thickness on the three-pulse photon echo＇s amplitude and efficiency is analyzed with the Maxwell-Bloch equations solved by finite-difference timedomain method.We demonstrate that the amplitude of three-pulse echo will increase with the increasing of thickness and the optimum thickness to generate three-pulse photon echo is 0.3 cm for Tm^（3＋）：YAG when the attenuation of the input pulse is taken into account.Meanwhile,we find the expression 0.09 exp（α＇L）,which is previously employed to describe the relationship between echo＇s efficiency and thickness,should be modified as 1.3 · 0.09 exp（2.4 ·α＇L） with the propagation of echo considered.

Optical simulation of in-plane-switching blue phase liquid crystal display using the finite-difference time-domain method

The finite-difference time-domain method is used to simulate the optical characteristics of an in-plane switching blue phase liquid crystal display.Compared with the matrix optic methods and the refractive method,the finite-difference timedomain method,which is used to directly solve Maxwell＇s equations,can consider the lateral variation of the refractive index and obtain an accurate convergence effect.The simulation results show that e-rays and o-rays bend in different directions when the in-plane switching blue phase liquid crystal display is driven by the operating voltage.The finitedifference time-domain method should be used when the distribution of the liquid crystal in the liquid crystal display has a large lateral change.

Enhancement of MAD/MIR phasing at low resolution and a new procedure for automatic phase extension

To achieve de novo protein structure determination of challenging cases, multi-wavelength anomalous diffraction(MAD) and multiple isomorphous replacement(MIR) phasing can be powerful tools to obtain low-resolution initial phases from heavy-atom derivative datasets, then phase extension is needed against high-resolution data to obtain accurate structures.In this context, we propose a direct-methods procedure here that could improve the initial low-resolution MAD/MIR phase quality.And accordingly, an automated process for extending initial phases to high resolution is also described.These two procedures are both implanted in the newly released IPCAS pipeline.Three cases are used to perform the test, including one set of 4.17 ? MAD data from a membrane protein and two sets of MAD/MIR data with derivatives truncated down to 6.80 ? and 6.90 ?, respectively.All the results have shown that the initial phases generated from the direct-methods procedure are better than that from the conventional MAD/MIR methods.The automated phase extensions for the latter two cases starting from 6.80 ? to 3.00 ? and 6.90 ? to 2.80 ? are proved to be successful, leading to complete models.This may provide convenient and reliable tools for phase improvement and phase extension in difficult low-resolution tasks.

Adsorption and Transfer Properties for Toluene and pDichlorobenzene in Dense CO_2/Silica Gel Packed Bed System by Moment Method and Time-Domain Analysis

Based on chromatographic theory, the moment method and the time-domain fitting analysis were applied to measure and evaluate the adsorption equilibrium constant and mass transfer properties (axial dispersion coefficient and effective intra-particle diffusivity) for toluene and p-dichlorobenzene on silica gel adsorbent in the subcritical and supercritical CO2. An apparatus based on supercritical fluid chromatography was established and the experiments were performed at temperatures of 298.15-318.15 K and pressures of 7.5-17.8 MPa. The two methods have been compared. The results show that for the systems studied here the moment method can give reasonable values for both adsorption equilibrium constant and mass transfer properties, but the time-domain analysis only can obtain the adsorption equilibrium constant. The dependence of adsorption equilibrium constant and mass transfer properties on temperature and pressure was investigated.