Working condition recognition of sucker rod pumping system based on 4-segment time-frequency signature matrix and deep learning

High-precision and real-time diagnosis of sucker rod pumping system(SRPS)is important for quickly mastering oil well operations.Deep learning-based method for classifying the dynamometer card(DC)of oil wells is an efficient diagnosis method.However,the input of the DC as a two-dimensional image into the deep learning framework suffers from low feature utilization and high computational effort.Additionally,different SRPSs in an oil field have various system parameters,and the same SRPS generates different DCs at different moments.Thus,there is heterogeneity in field data,which can dramatically impair the diagnostic accuracy.To solve the above problems,a working condition recognition method based on 4-segment time-frequency signature matrix(4S-TFSM)and deep learning is presented in this paper.First,the 4-segment time-frequency signature(4S-TFS)method that can reduce the computing power requirements is proposed for feature extraction of DC data.Subsequently,the 4S-TFSM is constructed by relative normalization and matrix calculation to synthesize the features of multiple data and solve the problem of data heterogeneity.Finally,a convolutional neural network(CNN),one of the deep learning frameworks,is used to determine the functioning conditions based on the 4S-TFSM.Experiments on field data verify that the proposed diagnostic method based on 4S-TFSM and CNN(4S-TFSM-CNN)can significantly improve the accuracy of working condition recognition with lower computational cost.To the best of our knowledge,this is the first work to discuss the effect of data heterogeneity on the working condition recognition performance of SRPS.

The W transform and its improved methods for time-frequency analysis of seismic data

The conventional linear time-frequency analysis method cannot achieve high resolution and energy focusing in the time and frequency dimensions at the same time,especially in the low frequency region.In order to improve the resolution of the linear time-frequency analysis method in the low-frequency region,we have proposed a W transform method,in which the instantaneous frequency is introduced as a parameter into the linear transformation,and the analysis time window is constructed which matches the instantaneous frequency of the seismic data.In this paper,the W transform method is compared with the Wigner-Ville distribution(WVD),a typical nonlinear time-frequency analysis method.The WVD method that shows the energy distribution in the time-frequency domain clearly indicates the gravitational center of time and the gravitational center of frequency of a wavelet,while the time-frequency spectrum of the W transform also has a clear gravitational center of energy focusing,because the instantaneous frequency corresponding to any time position is introduced as the transformation parameter.Therefore,the W transform can be benchmarked directly by the WVD method.We summarize the development of the W transform and three improved methods in recent years,and elaborate on the evolution of the standard W transform,the chirp-modulated W transform,the fractional-order W transform,and the linear canonical W transform.Through three application examples of W transform in fluvial sand body identification and reservoir prediction,it is verified that W transform can improve the resolution and energy focusing of time-frequency spectra.

A novel interference suppression scheme applying complex weighted matrix interleaving mapping for UFMC systems

In response to the problem of inter-carrier interference(ICI)and inter-subband interference(IBI)in the received signals of universal filtered multi-carrier(UFMC)systems,a novel interfer-ence suppression design scheme applying the method of complex weighted matrix inter-leaving map-ping(CWMIM)is proposed on the basis of the existing suppression scheme of conjugate weighted butterfly interleaving mapping(CWBIM).The proposed scheme performs matrix interleaving map-ping on the transmitted signal,which not only improves the carrier interference ratio(CIR)of the received signal by combining the original IBI and ICI terms,but also further inhibits the probability of burst error in the received signal.Meanwhile,the scheme can further decrease the impact of phase rotation errors in the received signal by increasing the number of rotation factors.Theoretical analysis and simulation results demonstrate that compared with CWBIM-UFMC,the proposed CWMIM-UFMC can obtain more effective ICI and IBI suppression and better system bit error rate(BER)performance with only a little bit increase in computational complexity.

High-resolution seismic inversion method based on joint data-driven in the time-frequency domain

Seismic inversion can be divided into time-domain inversion and frequency-domain inversion based on different transform domains.Time-domain inversion has stronger stability and noise resistance compared to frequencydomain inversion.Frequency domain inversion has stronger ability to identify small-scale bodies and higher inversion resolution.Therefore,the research on the joint inversion method in the time-frequency domain is of great significance for improving the inversion resolution,stability,and noise resistance.The introduction of prior information constraints can effectively reduce ambiguity in the inversion process.However,the existing modeldriven time-frequency joint inversion assumes a specific prior distribution of the reservoir.These methods do not consider the original features of the data and are difficult to describe the relationship between time-domain features and frequency-domain features.Therefore,this paper proposes a high-resolution seismic inversion method based on joint data-driven in the time-frequency domain.The method is based on the impedance and reflectivity samples from logging,using joint dictionary learning to obtain adaptive feature information of the reservoir,and using sparse coefficients to capture the intrinsic relationship between impedance and reflectivity.The optimization result of the inversion is achieved through the regularization term of the joint dictionary sparse representation.We have finally achieved an inversion method that combines constraints on time-domain features and frequency features.By testing the model data and field data,the method has higher resolution in the inversion results and good noise resistance.

Application of sparse time-frequency decomposition to seismic data

The Gabor and S transforms are frequently used in time-frequency decomposition methods. Constrained by the uncertainty principle, both transforms produce low-resolution time-frequency decomposition results in the time and frequency domains. To improve the resolution of the time-frequency decomposition results, we use the instantaneous frequency distribution function（IFDF） to express the seismic signal. When the instantaneous frequencies of the nonstationary signal satisfy the requirements of the uncertainty principle, the support of IFDF is just the support of the amplitude ridges in the signal obtained using the short-time Fourier transform. Based on this feature, we propose a new iteration algorithm to achieve the sparse time-frequency decomposition of the signal. The iteration algorithm uses the support of the amplitude ridges of the residual signal obtained with the short-time Fourier transform to update the time-frequency components of the signal. The summation of the updated time-frequency components in each iteration is the result of the sparse timefrequency decomposition. Numerical examples show that the proposed method improves the resolution of the time-frequency decomposition results and the accuracy of the analysis of the nonstationary signal. We also use the proposed method to attenuate the ground roll of field seismic data with good results.

TVAR Time-frequency Analysis for Non-stationary Vibration Signals of Spacecraft

Predicting the time-varying auto-spectral density of a spacecraft in high-altitude orbits requires an accurate model for the non-stationary random vibration signals with densely spaced modal frequency. The traditional time-varying algorithm limits prediction accuracy, thus affecting a number of operational decisions. To solve this problem, a time-varying auto regressive （TVAR） model based on the process neural network （PNN） and the empirical mode decomposition （EMD） is proposed. The time-varying system is tracked on-line by establishing a time-varying parameter model, and then the relevant parameter spectrum is obtained. Firstly, the EMD method is utilized to decompose the signal into several intrinsic mode functions （IMFs）. Then for each IMF, the PNN is established and the time-varying auto-spectral density is obtained. Finally, the time-frequency distribution of the signals can be reconstructed by linear superposition. The simulation and the analytical results from an example demonstrate that this approach possesses simplicity, effectiveness, and feasibility, as well as higher frequency resolution.

Intelligibility evaluation of enhanced whisper in joint time-frequency domain

Some factors influencing the intelligibility of the enhanced whisper in the joint time-frequency domain are evaluated. Specifically, both the spectrum density and different regions of the enhanced spectrum are analyzed. Experimental results show that for a spectrum of some density, the joint time-frequency gain-modification based speech enhancement algorithm achieves significant improvement in intelligibility. Additionally, the spectrum region where the estimated spectrum is smaller than the clean spectrum, is the most important region contributing to intelligibility improvement for the enhanced whisper. The spectrum region where the estimated spectrum is larger than twice the size of the clean spectrum is detrimental to speech intelligibility perception within the whisper context.

High-SpeedReal-TimeDataAcquisitionSystem Realized by Interleaving/Multiplexing Technique

The interleaving/multiplexing technique was used to realize a 200?MHz real time data acquisition system. Two 100?MHz ADC modules worked parallelly and every ADC plays out data in ping pang fashion. The design improved the system conversion rata to 200?MHz and reduced the speed of data transporting and storing to 50?MHz. The high speed HDPLD and ECL logic parts were used to control system timing and the memory address. The multi layer print board and the shield were used to decrease interference produced by the high speed circuit. The system timing was designed carefully. The interleaving/multiplexing technique could improve the system conversion rata greatly while reducing the speed of external digital interfaces greatly. The design resolved the difficulties in high speed system effectively. The experiment proved the data acquisition system is stable and accurate.

空间光通信RS-INTERLEAVING信道编码研究

分析了空间激光通信的两种信道数学模型——自由空间光通信信道和大气激光通信信道,针对信道时变突发的特点,引入信道编码技术和交织技术,交织对发送信号进行扰码以克服大气信道相关性,Reed-Solomon(RS)线性分组码克服信道的突发错误,并进行一定程度的纠错。计算机仿真结果表明,RS编码和交织技术非常适合空间光通信信道,能大大降低系统的误码率。

Effects of Gabor transform parameters on signa time-frequency resolution

In this paper, it is described that the time-frequency resolution of geophysical signals is affected by the time window function attenuation coefficient and sampling interval and how such effects are eliminated effectively. Improving the signal resolution is the key to signal time-frequency analysis processing and has wide use in geophysical data processing and extraction of attribute parameters. In this paper, authors research the effects of the attenuation coefficient choice of the Gabor transform window function and sampling interval on signal resolution. Unsuitable parameters not only decrease the signal resolution on the frequency spectrum but also miss the signals. It is essential to first give the optimum window and range of parameters through time-frequency analysis simulation using the Gabor transform. In the paper, the suggestions about the range and choice of the optimum sampling interval and processing methods of general seismic signals are given.

Short-span interleaving based selected mapping

A novel interleaving based selected mapping （SLM） scheme to depress the relatively high peak power of transmit signals in multicarrier communications is proposed. In the scheme, a group of bit-level interleavers spanning only a few bits are used to produce multiple sequences representing the same information, and one of the sequences resulting in the lowest peak-to-average power ratio （PAPR） is selected for transmission. The implementation of the scheme including the structure of the short-span interleaver is illustrated. The performance of this PAPR reduction scheme is investigated by simulations. This scheme exhibits a good PAPR reduction performance, and for signals of high level modulation, such as 16QAM and 64QAM, it approaches the best performance of all SLM schemes. Compared to the conventional interleaving SLM, this short-span interleaving SLM results in a very short time delay, requires very few register units for buffering, and can be easily implemented by hardware.

Novel radar dwell scheduling algorithm based on pulse interleaving

The problem of scheduling radar dwells in multifunction phased array radar systems is addressed. A novel dwell scheduling algorithm is proposed. The whole scheduling process is based on an online pulse interleaving technique. It takes the system timing and energy constraints into account. In order to adapt the dynamic task load, the algorithm considers both the priorities and deadlines of tasks. The simulation results demonstrate that compared with the conventional adaptive dwell scheduling algorithm, the proposed one can improve the task drop rate and system resource utility effectively.

大亚湾反应堆中微子实验Monte Carlo样本事例混合的interleaving算法

在反应堆中微子实验的物理数据分析中,前后事例间的时间关联分析是非常重要的一环.对事例间时间结构特性的研究,将有助于理解本底事例产生的物理机制,有利于对信号事例的挑选和对本底事例的排除.与此相应,在产生可用于物理分析的反应堆中微子Monte Carlo(MC)模拟数据的过程中,重构不同事例间的时间关联是一个重要步骤.通过研究大亚湾反应堆中微子实验的数据特点,开发了interleaving算法用于产生带有时间关联的海量物理数据;利用该方法实现了对不同样本的MC数据按事例率的混合;并简要给出了interleaving算法的空间和时间复杂度分析。

Time-Frequency Signal Processing for Gas-Liquid Two Phase Flow Through a Horizontal Venturi Based on Adaptive Optimal-Kernel Theory

A time-frequency signal processing method for two-phase flow through a horizontal Venturi based on adaptive optimal-kernel （AOK） was presented in this paper.First,the collected dynamic differential pressure signal of gas-liquid two-phase flow was preprocessed,and then the AOK theory was used to analyze the dynamic differ-ential pressure signal.The mechanism of two-phase flow was discussed through the time-frequency spectrum.On the condition of steady water flow rate,with the increasing of gas flow rate,the flow pattern changes from bubbly flow to slug flow,then to plug flow,meanwhile,the energy distribution of signal fluctuations show significant change that energy transfer from 15-35 Hz band to 0-8 Hz band;moreover,when the flow pattern is slug flow,there are two wave peaks showed in the time-frequency spectrum.Finally,a number of characteristic variables were defined by using the time-frequency spectrum and the ridge of AOK.When the characteristic variables were visu-ally analyzed,the relationship between different combination of characteristic variables and flow patterns would be gotten.The results show that,this method can explain the law of flow in different flow patterns.And characteristic variables,defined by this method,can get a clear description of the flow information.This method provides a new way for the flow pattern identification,and the percentage of correct prediction is up to 91.11%.

Time-Frequency Characteristics of the Relationships Between Tropical Indo-Pacific SSTs

In this study, several advanced analysis methods are applied to understand the relationships between the Nino-3.4 sea surface temperatures （SST） and the SSTs related to the tropical Indian Ocean Dipole （IOD）. By analyzing a long data record, the authors focus on the time-frequency characteristics of these relationships, and of the structure of IOD. They also focus on the seasonal dependence of those characteristics in both time and frequency domains. Among the Nino-3.4 SST, IOD, and SSTs over the tropical western Indian Ocean （WIO） and eastern Indian Ocean （EIO）, the WIO SST has the strongest annual and semiannual oscillations. While the Nino-3.4 SST has large inter-annual variability that is only second to its annual variability, the IOD is characterized by the largest semiannual oscillation, which is even stronger than its annual oscillation. The IOD is strongly and stably related to the EIO SST in a wide range of frequency bands and in all seasons. However, it is less significantly related to the WIO SST in the boreal winter and spring. There exists a generally weak and unstable relationship between the WIO and EIO SSTs, especially in the biennial and higher frequency bands. The relationship is especially weak in summer and fall, when IOD is apparent, but appears highly positive in winter and spring, when the IOD is unimportantly weak and even disappears. This feature reflects a caution in the definition and application of IOD. The Nino-3.4 SST has a strong positive relationship with the WIO SST in all seasons, mainly in the biennial and longer frequency bands. However, it shows no significant relationship with the EIO SST in summer and fall, and with IOD in winter and spring.

Pulse interleaving scheduling algorithm for digital array radar

An online pulse interleaving scheduling algorithm is proposed for a solution to the task scheduling problem in the digital array radar(DAR). The full DAR task structure is explicitly considered in a way that the waiting duration is able to be utilized to transmit or receive subtasks, namely the pulse interleaving,as well as the receiving durations of different tasks are able to be overlapped. The algorithm decomposes the pulse interleaving scheduling analysis into the time constraint check and the energy constraint check, and schedules online all kinds of tasks that are able to be interleaved. Thereby the waiting duration and the receiving duration in the DAR task are both fully utilized. The simulation results verify the performance improvement and the high efficiency of the proposed algorithm compared with the existing ones.

MIMO radar dwell scheduling based on novel pulse interleaving technique

According to the signal processing characteristic of MIMO radars,an adaptive dwell scheduling algorithm is proposed.It is based on a novel pulse interleaving technique,which makes full use of transmitting,waiting and receiving durations of radar dwells.The utilization of transmitting duration is unique for MIMO radars and is realized through transmitting duration overlapping.Simulation results show that,compared with the conventional scheduling algorithm,the scheduling performance of MIMO radars can be improved effectively by the proposed algorithm,and the scheduling rule can be chosen arbitrarily when using the proposed algorithm.

Improving the resolution of seismic traces based on the secondary time-frequency spectrum

The resolution of seismic data is critical to seismic data processing and the subsequent interpretation of fine structures. In conventional resolution improvement methods, the seismic data is assumed stationary and the noise level not changes with space, whereas the actual situation does not satisfy this assumption, so that results after resolution improvement processing is not up to the expected effect. To solve these problems, we propose a seismic resolution improvement method based on the secondary time-frequency spectrum. First, we propose the secondary time-frequency spectrum based on S transform （ST） and discuss the reflection coefficient sequence and time-dependent wavelet in the secondary time frequency spectrum. Second, using the secondary time frequency spectrum, we design a two- dimensional filter to extract the amplitude spectrum of the time-dependent wavelet. Then, we discuss the improvement of the resolution operator in noisy environments and propose a novel approach for determining the broad frequency range of the resolution operator in the time- fi＇equency-space domain. Finally, we apply the proposed method to synthetic and real data and compare the results of the traditional spectrum-modeling deconvolution and Q compensation method. The results suggest that the proposed method does not need to estimate the Q value and the resolution is not limited by the bandwidth of the source. Thus, the resolution of the seismic data is improved sufficiently based on the signal-to-noise ratio （SNR）.

ECCM scheme against interrupted sampling repeater jammer based on time-frequency analysis

The interrupted sampling repeater jamming（ISRJ） is an effective deception jamming method for coherent radar, especially for the wideband linear frequency modulation（LFM） radar. An electronic counter-countermeasure（ECCM） scheme is proposed to remove the ISRJ-based false targets from the pulse compression result of the de-chirping radar. Through the time-frequency（TF） analysis of the radar echo signal, it can be found that the TF characteristics of the ISRJ signal are discontinuous in the pulse duration because the ISRJ jammer needs short durations to receive the radar signal. Based on the discontinuous characteristics a particular band-pass filter can be generated by two alternative approaches to retain the true target signal and suppress the ISRJ signal. The simulation results prove the validity of the proposed ECCM scheme for the ISRJ.

Anti-interference ultra-wideband system based on spreading and interleaving

To suppress the interference in the ultra-wideband （AI-UWB） system is a challenging problem. An anti-interference multiband orthogonal frequency-division multiplexing ultra-wideband （AI-UWB） system, based on spreading and interleaving is addressed. It will exploit the frequency diversity across the subcarriers and provide the robustness to narrow-band interference, by spreading the coded bit streams within each sub-band and interleaving across all sub-bands. Simulating results show that the spreading and interleaving provide about 5 dB to 10 dB advantages over the conventional multiband orthogonal frequency-division multiplexing ultra-wideband system in signal-to-interference ratio. Spreading and interleaving is an effective cure for enhancing the robustness to narrowband interference.