Kinetic equilibrium reconstruction with internal safety factor profile constraints on EAST tokamak

Reconstruction of plasma equilibrium plays an important role in the analysis and simulation of plasma experiments. The kinetic equilibrium reconstruction with pressure and edge current constraints has been employed on EAST tokamak. However, the internal safety factor(q) profile is not accurate. This paper proposes a new way of incorporating q profile constraints into kinetic equilibrium reconstruction. The q profile is yielded from the Polarimeter Interferometer(POINT)reconstruction. Virtual probes containing information on q profile constraints are added to inputs of the kinetic equilibrium reconstruction program to obtain the final equilibrium. The new equilibrium produces a more accurate internal q profile. This improved method would help analyze EAST experiments.

A Metadata Reconstruction Algorithm Based on Heterogeneous Sensor Data for Marine Observations

Vast amounts of heterogeneous data on marine observations have been accumulated due to the rapid development of ocean observation technology.Several state-of-art methods are proposed to manage the emerging Internet of Things(IoT)sensor data.However,the use of an inefficient data management strategy during the data storage process can lead to missing metadata;thus,part of the sensor data cannot be indexed and utilized(i.e.,‘data swamp’).Researchers have focused on optimizing storage procedures to prevent such disasters,but few have attempted to restore the missing metadata.In this study,we propose an AI-based algorithm to reconstruct the metadata of heterogeneous marine data in data swamps to solve the above problems.First,a MapReduce algorithm is proposed to preprocess raw marine data and extract its feature tensors in parallel.Second,load the feature tensors are loaded into a machine learning algorithm and clustering operation is implemented.The similarities between the incoming data and the trained clustering results in terms of clustering results are also calculated.Finally,metadata reconstruction is performed based on existing marine observa-tion data processing results.The experiments are designed using existing datasets obtained from ocean observing systems,thus verifying the effectiveness of the algorithms.The results demonstrate the excellent performance of our proposed algorithm for the metadata recon-struction of heterogenous marine observation data.

Sparse Seismic Data Reconstruction Based on a Convolutional Neural Network Algorithm

At present,the acquisition of seismic data is developing toward high-precision and high-density methods.However,complex natural environments and cultural factors in many exploration areas cause difficulties in achieving uniform and intensive acquisition,which makes complete seismic data collection impossible.Therefore,data reconstruction is required in the processing link to ensure imaging accuracy.Deep learning,as a new field in rapid development,presents clear advantages in feature extraction and modeling.In this study,the convolutional neural network deep learning algorithm is applied to seismic data reconstruction.Based on the convolutional neural network algorithm and combined with the characteristics of seismic data acquisition,two training strategies of supervised and unsupervised learning are designed to reconstruct sparse acquisition seismic records.First,a supervised learning strategy is proposed for labeled data,wherein the complete seismic data are segmented as the input of the training set and are randomly sampled before each training,thereby increasing the number of samples and the richness of features.Second,an unsupervised learning strategy based on large samples is proposed for unlabeled data,and the rolling segmentation method is used to update(pseudo)labels and training parameters in the training process.Through the reconstruction test of simulated and actual data,the deep learning algorithm based on a convolutional neural network shows better reconstruction quality and higher accuracy than compressed sensing based on Curvelet transform.

Mapping winter wheat using phenological feature of peak before winter on the North China Plain based on time-series MODIS data

By employing the unique phenological feature of winter wheat extracted from peak before winter （PBW） and the advantages of moderate resolution imaging spectroradiometer （MODIS） data with high temporal resolution and intermediate spatial resolution, a remote sensing-based model for mapping winter wheat on the North China Plain was built through integration with Landsat images and land-use data. First, a phenological window, PBW was drawn from time-series MODIS data. Next, feature extraction was performed for the PBW to reduce feature dimension and enhance its information. Finally, a regression model was built to model the relationship of the phenological feature and the sample data. The amount of information of the PBW was evaluated and compared with that of the main peak （MP）. The relative precision of the mapping reached up to 92% in comparison to the Landsat sample data, and ranged between 87 and 96% in comparison to the statistical data. These results were sufficient to satisfy the accuracy requirements for winter wheat mapping at a large scale. Moreover, the proposed method has the ability to obtain the distribution information for winter wheat in an earlier period than previous studies. This study could throw light on the monitoring of winter wheat in China by using unique phenological feature of winter wheat.

Clustering Structure Analysis in Time-Series Data With Density-Based Clusterability Measure

Clustering is used to gain an intuition of the struc tures in the data.Most of the current clustering algorithms pro duce a clustering structure even on data that do not possess such structure.In these cases,the algorithms force a structure in the data instead of discovering one.To avoid false structures in the relations of data,a novel clusterability assessment method called density-based clusterability measure is proposed in this paper.I measures the prominence of clustering structure in the data to evaluate whether a cluster analysis could produce a meaningfu insight to the relationships in the data.This is especially useful in time-series data since visualizing the structure in time-series data is hard.The performance of the clusterability measure is evalu ated against several synthetic data sets and time-series data sets which illustrate that the density-based clusterability measure can successfully indicate clustering structure of time-series data.

THE STATE SPACE RECONSTRUCTION TECHNOLOGY OF DIFFERENT KINDS OF CHAOTIC DATA OBTAINED FROM DYNAMICAL SYSTEM

Certain deterministic nonlinear systems may show chaotic behavior. We consider the motion of qualitative information and the practicalities of extracting a part from chaotic experimental data. Our approach based on a theorem of Takens draws on the ideas from the generalized theory of information known as singular system analysis. We illustrate this technique by numerical data from the chaotic region of the chaotic experimental data. The method of the singular-value decomposition is used to calculate the eigenvalues of embedding space matrix. The corresponding concrete algorithm to calculate eigenvectors and to obtain the basis of embedding vector space is proposed in this paper. The projection on the orthogonal basis generated by eigenvectors of timeseries data and concrete paradigm are also provided here. Meanwhile the state space reconstruction technology of different kinds of chaotic data obtained from dynamical system has also been discussed in detail.

Spatio-temporal changes of underground coal fires during 2008-2016 in Khanh Hoa coal field(North-east of Viet Nam) using Landsat time-series data

Underground coal fires are one of the most common and serious geohazards in most coal producing countries in the world. Monitoring their spatio-temporal changes plays an important role in controlling and preventing the effects of coal fires, and their environmental impact. In this study, the spatio-temporal changes of underground coal fires in Khanh Hoa coal field(North-East of Viet Nam) were analyzed using Landsat time-series data during the 2008-2016 period. Based on land surface temperatures retrieved from Landsat thermal data, underground coal fires related to thermal anomalies were identified using the MEDIAN+1.5×IQR(IQR: Interquartile range) threshold technique. The locations of underground coal fires were validated using a coal fire map produced by the field survey data and cross-validated using the daytime ASTER thermal infrared imagery. Based on the fires extracted from seven Landsat thermal imageries, the spatiotemporal changes of underground coal fire areas were analyzed. The results showed that the thermalanomalous zones have been correlated with known coal fires. Cross-validation of coal fires using ASTER TIR data showed a high consistency of 79.3%. The largest coal fire area of 184.6 hectares was detected in 2010, followed by 2014(181.1 hectares) and 2016(178.5 hectares). The smaller coal fire areas were extracted with areas of 133.6 and 152.5 hectares in 2011 and 2009 respectively. Underground coal fires were mainly detected in the northern and southern part, and tend to spread to north-west of the coal field.

Image reconstruction for cone-beam computed tomography using total p-variation plus Kullback-Leibler data divergence

Accurate reconstruction from a reduced data set is highly essential for computed tomography in fast and/or low dose imaging applications. Conventional total variation（TV）-based algorithms apply the L1 norm-based penalties, which are not as efficient as Lp（0〈p〈1） quasi-norm-based penalties. TV with a p-th power-based norm can serve as a feasible alternative of the conventional TV, which is referred to as total p-variation（TpV）. This paper proposes a TpV-based reconstruction model and develops an efficient algorithm. The total p-variation and Kullback-Leibler（KL） data divergence, which has better noise suppression capability compared with the often-used quadratic term, are combined to build the reconstruction model. The proposed algorithm is derived by the alternating direction method（ADM） which offers a stable, efficient, and easily coded implementation. We apply the proposed method in the reconstructions from very few views of projections（7 views evenly acquired within 180°）. The images reconstructed by the new method show clearer edges and higher numerical accuracy than the conventional TV method. Both the simulations and real CT data experiments indicate that the proposed method may be promising for practical applications.

Surface Reconstruction of 3D Scattered Data with Radial Basis Functions

We use Radial Basis Functions （RBFs） to reconstruct smooth surfaces from 3D scattered data. An object＇s surface is defined implicitly as the zero set of an RBF fitted to the given surface data. We propose improvements on the methods of surface reconstruction with radial basis functions. A sparse approximation set of scattered data is constructed by reducing the number of interpolating points on the surface. We present an adaptive method for finding the off-surface normal points. The order of the equation decreases greatly as the number of the off-surface constraints reduces gradually. Experimental results are provided to illustrate that the proposed method is robust and may draw beautiful graphics.

Reconstruction method of irregular seismic data with adaptive thresholds based on different sparse transform bases

Oil and gas seismic exploration have to adopt irregular seismic acquisition due to the increasingly complex exploration conditions to adapt to complex geological conditions and environments.However,the irregular seismic acquisition is accompanied by the lack of acquisition data,which requires high-precision regularization.The sparse signal feature in the transform domain in compressed sensing theory is used in this paper to recover the missing signal,involving sparse transform base optimization and threshold modeling.First,this paper analyzes and compares the effects of six sparse transformation bases on the reconstruction accuracy and efficiency of irregular seismic data and establishes the quantitative relationship between sparse transformation and reconstruction accuracy and efficiency.Second,an adaptive threshold modeling method based on sparse coefficient is provided to improve the reconstruction accuracy.Test results show that the method has good adaptability to different seismic data and sparse transform bases.The f-x domain reconstruction method of effective frequency samples is studied to address the problem of low computational efficiency.The parallel computing strategy of curvelet transform combined with OpenMP is further proposed,which substantially improves the computational efficiency under the premise of ensuring the reconstruction accuracy.Finally,the actual acquisition data are used to verify the proposed method.The results indicate that the proposed method strategy can solve the regularization problem of irregular seismic data in production and improve the imaging quality of the target layer economically and efficiently.

The Information Protection in Automatic Reconstruction of Not Continuous Geophysical Data Series

We show a quantitative technique characterized by low numerical mediation for the reconstruction of temporal sequences of geophysical data of length L interrupted for a time ΔT where . The aim is to protect the information acquired before and after the interruption by means of a numerical protocol with the lowest possible calculation weight. The signal reconstruction process is based on the synthesis of the low frequency signal extracted for subsampling (subsampling &#8711Dirac = ΔT in phase with ΔT) with the high frequency signal recorded before the crash. The SYRec (SYnthetic REConstruction) method for simplicity and speed of calculation and for spectral response stability is particularly effective in the studies of high speed transient phenomena that develop in very perturbed fields. This operative condition is found a mental when almost immediate informational responses are required to the observation system. In this example we are dealing with geomagnetic data coming from an uw counter intrusion magnetic system. The system produces (on time) information about the transit of local magnetic singularities (magnetic perturbations with low spatial extension), originated by quasi-point form and kinematic sources (divers), in harbors magnetic underwater fields. The performances of stability of the SYRec system make it usable also in long and medium period of observation (activity of geomagnetic observatories).

Research of Methods for Lost Data Reconstruction in Erasure Codes over Binary Fields

In the process of encoding and decoding,erasure codes over binary fields,which just need AND operations and XOR operations and therefore have a high computational efficiency,are widely used in various fields of information technology.A matrix decoding method is proposed in this paper.The method is a universal data reconstruction scheme for erasure codes over binary fields.Besides a pre-judgment that whether errors can be recovered,the method can rebuild sectors of loss data on a fault-tolerant storage system constructed by erasure codes for disk errors.Data reconstruction process of the new method has simple and clear steps,so it is beneficial for implementation of computer codes.And more,it can be applied to other non-binary fields easily,so it is expected that the method has an extensive application in the future.

Classification of Vegetation in North Tibet Plateau Based on MODIS Time-Series Data

Based on the 16d-composite MODIS （moderate resolution imaging spectroradiometer）-NDVI（normalized difference vegetation index） time-series data in 2004, vegetation in North Tibet Plateau was classified and seasonal variations on the pixels selected from different vegetation type were analyzed. The Savitzky-Golay filtering algorithm was applied to perform a filtration processing for MODIS-NDVI time-series data. The processed time-series curves can reflect a real variation trend of vegetation growth. The NDVI time-series curves of coniferous forest, high-cold meadow, high-cold meadow steppe and high-cold steppe all appear a mono-peak model during vegetation growth with the maximum peak occurring in August. A decision-tree classification model was established according to either NDVI time-series data or land surface temperature data. And then, both classifying and processing for vegetations were carried out through the model based on NDVI time-series curves. An accuracy test illustrates that classification results are of high accuracy and credibility and the model is conducive for studying a climate variation and estimating a vegetation production at regional even global scale.

Seismic data reconstruction based on low dimensional manifold model

Seismic data reconstruction is an essential and yet fundamental step in seismic data processing workflow,which is of profound significance to improve migration imaging quality,multiple suppression effect,and seismic inversion accuracy.Regularization methods play a central role in solving the underdetermined inverse problem of seismic data reconstruction.In this paper,a novel regularization approach is proposed,the low dimensional manifold model(LDMM),for reconstructing the missing seismic data.Our work relies on the fact that seismic patches always occupy a low dimensional manifold.Specifically,we exploit the dimension of the seismic patches manifold as a regularization term in the reconstruction problem,and reconstruct the missing seismic data by enforcing low dimensionality on this manifold.The crucial procedure of the proposed method is to solve the dimension of the patches manifold.Toward this,we adopt an efficient dimensionality calculation method based on low-rank approximation,which provides a reliable safeguard to enforce the constraints in the reconstruction process.Numerical experiments performed on synthetic and field seismic data demonstrate that,compared with the curvelet-based sparsity-promoting L1-norm minimization method and the multichannel singular spectrum analysis method,the proposed method obtains state-of-the-art reconstruction results.

Using MC Algorithm to Implement 3D Image Reconstruction for Yunnan Weather Radar Data

3D image reconstruction for weather radar data can not only help the weatherman to improve the forecast efficiency and accuracy, but also help people to understand the weather conditions easily and quickly. Marching Cubes (MC) algorithm in the surface rendering has more excellent applicability in 3D reconstruction for the slice images;it may shorten the time to find and calculate the isosurface from raw volume data, reflect the shape structure more accurately. In this paper, we discuss a method to reconstruct the 3D weather cloud image by using the proposed Cube Weighting Interpolation (CWI) and MC algorithm. Firstly, we detail the steps of CWI, apply it to project the raw radar data into the cubes and obtain the equally spaced cloud slice images, then employ MC algorithm to draw the isosurface. Some experiments show that our method has a good effect and simple operation, which may provide an intuitive and effective reference for realizing the 3D surface reconstruction and meteorological image stereo visualization.

RAD-seq data reveals robust phylogeny and morphological evolutionary history of Rhododendron

Rhododendron is famous for its high ornamental value.However,the genus is taxonomically difficult and the relationships within Rhododendron remain unresolved.In addition,the origin of key morphological characters with high horticulture value need to be explored.Both problems largely hinder utilization of germplasm resources.Most studies attempted to disentangle the phylogeny of Rhododendron,but only used a few genomic markers and lacked large-scale sampling,resulting in low clade support and contradictory phylogenetic signals.Here,we used restriction-site associated DNA sequencing(RAD-seq)data and morphological traits for 144 species of Rhododendron,representing all subgenera and most sections and subsections of this species-rich genus,to decipher its intricate evolutionary history and reconstruct ancestral state.Our results revealed high resolutions at subgenera and section levels of Rhododendron based on RAD-seq data.Both optimal phylogenetic tree and split tree recovered five lineages among Rhododendron.Subg.Therorhodion(cladeⅠ)formed the basal lineage.Subg.Tsutsusi and Azaleastrum formed cladeⅡand had sister relationships.CladeⅢincluded all scaly rhododendron species.Subg.Pentanthera(cladeⅣ)formed a sister group to Subg.Hymenanthes(cladeⅤ).The results of ancestral state reconstruction showed that Rhododendron ancestor was a deciduous woody plant with terminal inflorescence,ten stamens,leaf blade without scales and broadly funnelform corolla with pink or purple color.This study shows significant distinguishability to resolve the evolutionary history of Rhododendron based on high clade support of phylogenetic tree constructed by RAD-seq data.It also provides an example to resolve discordant signals in phylogenetic trees and demonstrates the application feasibility of RAD-seq with large amounts of missing data in deciphering intricate evolutionary relationships.Additionally,the reconstructed ancestral state of six important characters provides insights into the innovation of key characters in Rhododendron.

Geological Database for Plate Tectonic Reconstruction:A Conceptual Model

We all live on one planet and geology has no borders.Countries that reside on different continents share the same architecture beneath the surface;they were once neighbors with common foundations.Interoperable geological data are now freely available to everyone for the benefit of society,demonstrating that geoscience can address both global and regional problems.Whilst increasingly large datasets("Big Data")provide clear opportunities(e.g.,Spina,2018).

Screening and reconstruction of real-time traffic data

The quality of real time traffic information is of the great importance, therefore the factors having effect on traffic characteristics are analyzed in general, and the necessities of real time data processing are summarized. The identification and reconstruction of real time traffic data are analyzed using Kalman filter equation and statistical approach. Four methods for ITS (Intelligent transportation system) detector data screening in traffic management systems are discussed in detail. Meanwhile traffic data examinations are discussed with solutions formulated through analysis, and recommendations are made for information collection and data management in future.

Large-scale spatial data visualization method based on augmented reality

Background A task assigned to space exploration satellites involves detecting the physical environment within a certain space.However,space detection data are complex and abstract.These data are not conducive for researchers'visual perceptions of the evolution and interaction of events in the space environment.Methods A time-series dynamic data sampling method for large-scale space was proposed for sample detection data in space and time,and the corresponding relationships between data location features and other attribute features were established.A tone-mapping method based on statistical histogram equalization was proposed and applied to the final attribute feature data.The visualization process is optimized for rendering by merging materials,reducing the number of patches,and performing other operations.Results The results of sampling,feature extraction,and uniform visualization of the detection data of complex types,long duration spans,and uneven spatial distributions were obtained.The real-time visualization of large-scale spatial structures using augmented reality devices,particularly low-performance devices,was also investigated.Conclusions The proposed visualization system can reconstruct the three-dimensional structure of a large-scale space,express the structure and changes in the spatial environment using augmented reality,and assist in intuitively discovering spatial environmental events and evolutionary rules.

New reconstruction and forecasting algorithm for TEC data

To reconstruct the missing data of the total electron content （TEC） observations, a new method is proposed, which is based on the empirical orthogonal functions （EOF） decomposition and the value of eigenvalue itself. It is a self-adaptive EOF decomposition without any prior information needed, and the error of reconstructed data can be estimated. The interval quartering algorithm and cross-validation algorithm are used to compute the optimal number of EOFs for reconstruction. The interval quartering algorithm can reduce the computation time. The application of the data interpolating empirical orthogonal functions （DINEOF） method to the real data have demonstrated that the method can reconstruct the TEC map with high accuracy, which can be employed on the real-time system in the future work.