Nonlinear Time History Analysis for the Different Column Orientations under Seismic Wave Synthetic Approach

The significant impact of earthquakes on human lives and the built environment underscores the extensive human and economic losses caused by structural collapses. Over the years, researchers have focused on improving seismic design to mitigate earthquake-induced damages and enhance structural performance. In this study, a specific reinforced concrete (RC) frame structure at Kyungpook National University, designed for educational purposes, is analyzed as a representative case. Utilizing SAP 2000, the research conducts a nonlinear time history analysis to assess the structural performance under seismic conditions. The primary objective is to evaluate the influence of different column section designs, while maintaining identical column section areas, on structural behavior. The study employs two distinct seismic waves from Abeno (ABN) and Takatori (TKT) for the analysis, comparing the structural performance under varying seismic conditions. Key aspects examined include displacement, base shear force, base moment, joint radians, and layer displacement angle. This research is anticipated to serve as a valuable reference for seismic restraint reinforcement work on RC buildings, enriching the methods used for evaluating structures through nonlinear time history analysis based on the synthetic seismic wave approach.

Fuzzy Synthetic Evaluation of Water Quality of Naoli River Using Parameter Correlation Analysis

In order to improve the effectiveness of Fuzzy Synthetic Evaluation (FSE) models, a Parameter Correlation Analysis (PCA) was introduced into the FSE and a case study was carried out in the Naoli River in the Sanjiang Plain, Northeast China. The basic principle of the PCA is that the pairs of parameters which are highly correlated and linear with each other would contribute the same information to an assessment and one of them should be eliminated. The method of the PCA is that a correlation relationship among candidate parameters is examined before the FSE. If there is an apparent nonlinear or curvilinear relationship between two parameters, then both will be retained; if the correlation is significant (p<0.01), and the scatter plot suggests a linear relationship, then one of them will be deleted. However, which one will be deleted? For solving this problem, a sensitivity test was conducted and the higher sensitivity parameters remained. The results indicate that the original data should be preprocessed through the PCA for redundancy and variability. The study shows that introducing the PCA into the FSE can simplify the FSE calculation process greatly, while the results have not been changed much.

The Synthetic Effect of Magnetorheological Finishing Technology:Analysis,Modeling,and Control

The controllable key factors in magnetorheological finishing device were studied to determine their influence on efficiency of magnetorheological finishing(MRF)and surface of MRF,as well as interaction between efficiency and surface.Based on theoretical and experimental research,the law of material removal was explored and a new process variable based material removal model(PVMR)was proposed.The experimental findings demonstrate that PVMR reveals the law of the material removal with introduction of three concepts and makes a material removal function z(y i)where the magnetorheological finishing process parameters are considered since they are easy to control and adjust.So the material function of this model is quadratic curve function which is readily suitable for stability and online control magnetorheological finishing.

Application of synthetic principal component analysis model to mine area farmland heavy metal pollution assessment

Referring to GB5618-1995 about heavy metal pollution,and using statistical analysis SPSS,the major pollutants of mine area farmland heavy metal pollution were identified by variable clustering analysis.Assessment and classification were done to the mine area farmland heavy metal pollution situation by synthetic principal components analysis (PCA).The results show that variable clustering analysis is efficient to identify the principal components of mine area farmland heavy metal pollution.Sort and clustering were done to the synthetic principal components scores of soil sample,which is given by synthetic principal components analysis.Data structure of soil heavy metal contaminations relationships and pollution level of different soil samples are discovered.The results of mine area farmland heavy metal pollution quality assessed and classified with synthetic component scores reflect the influence of both the major and compound heavy metal pol- lutants.Identification and assessment results of mine area farmland heavy metal pollution can provide reference and guide to propose control measures of mine area farmland heavy metal pollution and focus on the key treatment region.

Grey relationship analysis and grey forecasting modeling on thermal stability of synthetic single diamond

Through analyzing 7 Ib-type samples of synthetic single diamonds by their DTA and TG in air, we ascertained the extrapolated onset temperature on the curves of DTA as the characteristic temperature of their thermal stabilities. Based on the grey system theory, we analyzed 4 factors influential in the thermal stability by the grey relationship analysis, a quantitative method, and derived the grey relationship sequence, that is, the rank of the influence extent of 4 factors on the thermal stability. Furthermore, we established the grey forecasting model, namely GM(1,5), for predicting the thermal stability of single diamonds with their intrinsic properties, which was then examined by a deviation-probability examination. The results illustrate that it is reasonable to take the Extrapolated Onset Temperature in DTA as the characteristic temperature for thermal stability (TS) of Ib-type synthetic single diamonds. The nitrogen content and grain shape regularity of diamonds are dominating factors. Likewise, grain size and compressive strength are minor factors. In addition, GM(1,5) can be used to predict the thermal stability of Ib-type synthetic single diamonds available. The precision rank of GM(1,5) is ‘GOOD’.

Dimensional analysis of the impact toughness test for synthetic diamond grits

The method,in which a few carats of diamond grits are placed inside a capsule together with a steel ball,shaken for a number of times,and the unbroken ratio of the grits is then used to evaluate the quality of the diamond,has been well established for many years.However,the unbroken percentage,in an equivalent view,represents the impact toughness of the grits and cannot reflect the value of the crushing energy.Most of the previous empirical formulas obtained from experiments by scholars cannot be applied to practical tests.In this paper,a dimensional analysis was applied to investigate the impact toughness experiment,and the dimensionless relationship has been built among those variables such as the toughness index,the impact time,the impact frequency and the crushing energy per unit area.According to the results of a large number of experiments with synthetic diamond grits of mesh size 45/50,the percentage of the broken grits H is proportional to the impact time T^（1.14） when the impact frequency is 2400 r/min,and the impact frequency f^（2.576） when the number of impacts is 2000.

Comparison and Finite Element Analysis of Steel or Synthetic Fiber Reinforced Precast, Prestressed Beams

Usage of fiber reinforced concrete to replace shear reinforcement has become more common in the precast industry in recent years. In some cases, the use of steel fibers could be problematic because of corrosion, hence, synthetic material could be a suitable alternative material solution. Thus, it would appear logical to undertake a comparison of these fibers＇ load bearing capacity to determine suitability in each case. In this paper, the bending and the shear tests of four large-scale and prestressed beams made of steel or synthetic fiber reinforced concrete without stirrups are presented. The post-cracking residual tensile strength diagram of the fibers, according to RILEM （International Union of Laboratories and Experts in Construction Materials, Systems and Structures） TC162, is given and the experimental behavior of the fiber solutions is compared. The modified fracture energy method is used to define an advanced material model for the fiber reinforced concrete in the finite element analysis. The numerical calculations and the test results are compared in terms of crack propagation and the loading-deflect＇ion process. As a consequence, both steel and synthetic fibers seem to be good alternatives to replace the stirrups. However, the behavior of each fiber is not the same. The numerical calculation provided a good approximation for the real scale tests.

Finite Difference Schemes for Time-Space Fractional Diffusion Equations in One-and Two-Dimensions

In this paper,finite difference schemes for solving time-space fractional diffusion equations in one dimension and two dimensions are proposed.The temporal derivative is in the Caputo-Hadamard sense for both cases.The spatial derivative for the one-dimensional equation is of Riesz definition and the two-dimensional spatial derivative is given by the fractional Laplacian.The schemes are proved to be unconditionally stable and convergent.The numerical results are in line with the theoretical analysis.

Dynamic synthetic analysis of circulation field of tropical cyclones affecting Shanghai

Eleven tropical cyclones(TCs)affected Shanghai and crossed the same latitude as Shanghai from 2007 to 2018.According to similar tracks from best-track data,TCs that cause significant precipitation in Shanghai can be divided into three types:landfall TCs,nearshore northward TCs,and western TCs.Based on ERA5 reanalysis data,the dynamic synthesis method was used to synthesize TC circulation situations to compare thermal,dynamic,water vapor,and stability conditions within TC circulations during the period when they affected Shanghai.The conclusions are as follows.1)When the three TC types are at the same latitude as Shanghai,they are all in the divergent field in the upper troposphere.For the landfall type,the subtropical high at 500 hPa is stronger and farther north than usual,and there is a high-pressure dam on the north side of the TCs.2)The warm advection of the three TC types at 925 hPa is located in the northern quadrant of the TCs.The dynamic and water vapor conditions are good in the north-western quadrant of landfall and western TCs,and more favorable in the eastern quadrant of nearshore northward TCs.3)The favorable effects of all three types on precipitation in Shanghai come from the boundary layer.Water vapor,upward motion,and instability conditions of landfall TCs are superior to the other two TC types.The best water vapor,dynamic,and convective instability conditions are at the northern boundary in Shanghai during landfall TCs,and the main sources of water vapor in Shanghai come from the eastern and northern boundaries.During nearshore northward TCs,the main contribution to precipitation is from the eastern boundary,while better dynamic and water vapor conditions come from the western and northern boundaries during western TCs.The above findings provide scientific and technical support for operational forecasting precipitation from TCs affecting mega-cities.

Thermal oxidation of two aviation synthetic lubricant base oils

The thermal degradation of two synthetic lubricants base oils, poly-a-olefins （PAO） and di-esters （DE）, was investigated under oxidative pyrolysis condition and their properties were characterized in simulated ＂areo-engine＂ by comparing the thermal stability and identifying the products of thermal decomposition as a function of exposure temperature. The characterization of the products were performed by means of Fourier transform infrared spectrometry （FTIR）, gas chromatography/mass spectrometry （GC/MS） and viscosity experiments. The results show that PAO has the lower thermal stability, being degraded at 200℃ different from 300 ℃ for DE. Several by-products are identified during the thermal degradation of two lubricant base oils. The majority of PAO products consist of alkenes and olefins, while more oxygen-contained organic compounds are detected in DE samples based on GC/MS analysis. The related reaction mechanisms are discussed based on the experimental results.

Joint multivariate statistical model and its applications to synthetic earthquake predic-tion

针对目前地震综合预报中的一些问题，利用近30年来迅速发展的多元统计分析中主成分分析、判别分析组成多元统计组合模型，在众多的地震预报指标(预报因子)中采用信息最大化方法，选择对中期预测信息累积贡献率大于90％地震预报指标，分别进行相关分析、预测、检验，最终应用马氏距离判别作外推综合预报；并以华北地区(30°～42°N，108°125°E)为例进行模型的应用检验，初步研究已取得了较好的效果．

CO_2 Density-Raman Shift Relation Derived from Synthetic Inclusions in Fused Silica Capillaries and Its Application

The densities of CO2 inclusions in minerals are commonly used to determine the crystallizing conditions of the host minerals. However, conventional microthermometry is difficult to apply for inclusions of small size （〈 5-10 μm） or low density. Raman analysis is an alternative method for determining CO2 density, provided that the CO2 density-Raman shift relation is known. This study aims to establish this CO2 density-Raman shift relation by using CO2 inclusions synthesized in fused silica capillaries. By using this newly-developed synthetic technique, we formed pure CO2 inclusions, and their densities were determined by microthermometry. The Raman analysis showed that the relation between CO2 density （D in g/cm^3） and the separations （△ in cm^-1） between the two main bands （i.e. Fermi diad bands） in CO2 Raman spectra can be represented by a cubic equation： D （g/cm^3）=0.74203（-0.019^3＋5.90332△^2-610.79472△＋21050.30165）-3.54278 （r^2=0.99920）. Our calculated D value for a given A is between those obtained from two previously-reported equations, which were derived from different experimental methods. An example was given in this study to demonstrate that the densities of natural CO2 inclusions that could not be derived from microthermometry could be determined by using our method.

SAR image denoising based on wavelet-fractal analysis

Wavelet-fractal based SAR （synthetic aperture radar） image processing is one of the advanced technologies in image processing. The main concept of analysis is that after wavelet transformation, multifractal spectrum of the signal is different from that of noise. This difference is used to alleviate the noise produced by SAR image.The method to denoise SAR image using the process based on wavelet-fractai analysis is discussed in detail. Essentially, the present method focuses on adjusting the Hoelder exponent α of multifractal spectrum. After simulation, α should be adjusted to 1.72-1.73. The more the value of α exceeds 1.73, the less distinctive the edges of SAR image become. According to the authors denoising is optimal at α=1.72-1.73. In other words, when α =1.72-1.73, a smooth and denoised SAR image is produced.

Analysis of the Quality of Daily DEM Generation with Geosynchronous InSAR

Up-to-date digital elevation model(DEM)products are essential in many fields such as hazards mitigation and urban management.Airborne and low-earth-orbit(LEO)space-borne interferometric synthetic aperture radar(InSAR)has been proven to be a valuable tool for DEM generation.However,given the limitations of cost and satellite repeat cycles,it is difficult to generate or update DEMs very frequently(e.g.,on a daily basis)for a very large area(e.g.,continental scale or greater).Geosynchronous synthetic aperture radar(GEOSAR)satellites fly in geostationary earth orbits,allowing them to observe the same ground area with a very short revisit time(daily or shorter).This offers great potential for the daily DEM generation that is desirable yet thus far impossible with space-borne sensors.In this work,we systematically analyze the quality of daily GEOSAR DEM.The results indicate that the accuracy of a daily GEOSAR DEM is generally much lower than what can be achieved with typical LEO synthetic aperture radar(SAR)sensors;therefore,it is important to develop techniques to mitigate the effects of errors in GEOSAR DEM generation.

SAR tomography imaging via higher-order spectrum analysis

To deal with the non-Caussian noise in standard 2-D SAR images, the deramped signal in imaging plane, and the possible symmetric distribution of complex noise, the fourth-order cumulant of complex process is introduced into SAR tomography. With the estimated AR parameters of ARMA model of noise through Yule-Walker equation, the signal series of height is pre-filtered. Then, through ESPRIT, the spectrum is obtained and the aperture in height direction is synthesized. Finally, the SAR tomography imaging of scene is achieved. The results of processing on signal with non-Gaussian noise demonstrate the robustness of the proposed method. The tomography imaging of the scenes shows that the higher-order spectrum analysis is feasible in the application.

Seismic reliability assessment of a steel moment-resisting frame with two different ductility levels using a cloud analysis approach

A cloud method for generating percentile engineering demand parameter versus intensity measure(EDP-IM) curves of a structure subjected to a set of synthetic ground motions is presented. To this end, an ensemble of synthetic ground motions based on available real ones is generated. This is done by using attenuation relationships, duration and suitable Gutenberg-Richter relations attributed to the considered seismic hazard at a given site by estimating a suitable distribution of magnitude and site to source distance. The study aims to clarify the significance of the duration and frequency content on the seismic performance of structures, which were not considered in developing percentile incremental dynamic analysis(IDA) curves. The collapse probabilities of two steel moment-resisting frames with different ductility levels generated by IDA and the proposed cloud method are compared at different intensity levels. When compared with conventional IDA, the suggested cloud analysis(SCA) methodology with the same run number of dynamic analyses was able to develop response hazard curves that were more consistent with site-specific seismic hazards. Eliminating the need to find many real records by generating synthetic records consistent with site-specific seismic hazards from a few available recorded ground motions is another advantage of using this scheme over the IDA method..

Sparse flight spotlight mode 3-D imaging of spaceborne SAR based on sparse spectrum and principal component analysis

The spaceborne synthetic aperture radar(SAR)sparse flight 3-D imaging technology through multiple observations of the cross-track direction is designed to form the cross-track equivalent aperture,and achieve the third dimensionality recognition.In this paper,combined with the actual triple star orbits,a sparse flight spaceborne SAR 3-D imaging method based on the sparse spectrum of interferometry and the principal component analysis(PCA)is presented.Firstly,interferometric processing is utilized to reach an effective sparse representation of radar images in the frequency domain.Secondly,as a method with simple principle and fast calculation,the PCA is introduced to extract the main features of the image spectrum according to its principal characteristics.Finally,the 3-D image can be obtained by inverse transformation of the reconstructed spectrum by the PCA.The simulation results of 4.84 km equivalent cross-track aperture and corresponding 1.78 m cross-track resolution verify the effective suppression of this method on high-frequency sidelobe noise introduced by sparse flight with a sparsity of 49%and random noise introduced by the receiver.Meanwhile,due to the influence of orbit distribution of the actual triple star orbits,the simulation results of the sparse flight with the 7-bit Barker code orbits are given as a comparison and reference to illuminate the significance of orbit distribution for this reconstruction results.This method has prospects for sparse flight 3-D imaging in high latitude areas for its short revisit period.

NEW SAR IMAGE INTERPRETATION METHOD OF AIRCRAFT BASED ON JOINT TIME-FREQUENCY ANALYSIS

With the continuous improvement of Synthetic Aperture Radar(SAR) resolution, interpreting the small targets like aircraft in SAR images becomes possible and turn out to be a hot spot in SAR application research. However, due to the complexity of SAR imaging mechanism, interpreting targets in SAR images is a tough problem. This paper presents a new aircraft interpretation method based on the joint time-frequency analysis and multi-dimensional contrasting of basic structures. Moreover, SAR data acquisition experiment is designed for interpreting the aircraft. Analyzing the experiment data with our method, the result shows that the proposed method largely makes use of the SAR data information. The reasonable results can provide some auxiliary support for the SAR images manual interpretation.

A novel oil spill detection method from synthetic aperture radar imageries via a bidimensional empirical mode decomposition

Oil spills pose a major threat to ocean ecosystems and their health. Synthetic aperture radar（SAR） sensors can detect oil spills on the sea surface. These oil spills appear as dark spots in SAR images. However, dark formations can be caused by a number of phenomena. It is aimed to distinguishing oil spills or look-alike objects. A novel method based on a bidimensional empirical mode decomposition is proposed. The selected dark formations are first decomposed into several bidimensional intrinsic mode functions and the residue. Subsequently, 64 dimension feature sets are calculated using the Hilbert spectral analysis and five new features are extracted with a relief algorithm. Mahalanobis distances are then used for classification. Three data sets containing oil spills or look-alikes are used to test the accuracy rate of the method. The accuracy rate is more than 90%. The experimental results demonstrate that the novel method can detect oil spills validly and accurately.