An Improved Text-Based and Image-Based CAPTCHA Based on Solving and Response Time

CAPTCHA is an acronym that stands for Completely Automated Public Turing Test to tell Computers and Humans Apart(CAPTCHA),it is a good example of an authentication system that can be used to determine the true identity of any user.It serves as a security measure to prevent an attack caused by web bots(automatic programs)during an online transaction.It can come as text-based or image-based depending on the project and the programmer.The usability and robustness,as well as level of security,provided each of the varies and call for the development of an improved system.Hence,this paper studied and improved two different CAPTCHA systems(the text-based CAPTCHA and image-based CAPTCHA).The textbased and image-based CAPTCHAwere designed using JavaScript.Response time and solving time are the two metrics used to determine the effectiveness and efficiency of the two CAPTCHA systems.The inclusion of response time and solving time improved the shortfall of the usability and robustness of the existing system.The developed system was tested using 200 students from the Federal College of Animal Health and Production Technology.The results of each of the participants,for the two CAPTCHAs,were extracted from the database and subjected to analysis using SPSS.The result shows that textbased CAPTCHAhas the lowest average solving time(21.3333 s)with a 47.8%success rate while image-based CAPTCHA has the highest average solving time was 23.5138 s with a 52.8%success rate.The average response time for the image-based CAPTCHA was 2.1855 s with a 37.9%success rate lower than the text-based CAPTCHA response time(3.5561 s)with a 62.1%success rate.This indicates that the text-based CAPTCHA is more effective in terms of usability tests while image-based CAPTCHA is more efficient in terms of system responsiveness and recommended for potential users.

The Application of Information Systems to Improve Ambulance Response Times in the UK

Emergency ambulance services in the UK are tasked with providing pre-hospital patient care and clinical services with a target response time between call connect to on-scene attendance.In 2017,NHS England introduced four new response time categories based on patient needs.The most challenging is to be on-scene for a life-threatening situation within seven minutes of the call being connected when such calls are random in terms of time and place throughout a large territory.Recent evidence indicates emergency ambulance services regularly fall short of achieving the target ambulance response times set by the National Health Service(NHS).To achieve these targets,they need to undertake transformational change and apply statistical,operations research and artificial intelligence techniques in the form of five separate modules covering demand forecasting,plus locate,allocate,dispatch,monitoring and re-deployment of resources.These modules should be linked in real-time employing a data warehouse to minimise computational data and generate accurate,meaningful and timely decisions ensuring patients receive an appropriate and timely response.A simulation covering a limited geographical area,time and operational data concluded that this form of integration of the five modules provides accurate and timely data upon which to make decisions that effectively improve ambulance response times.

Treat to target in Crohn’s disease:A practical guide for clinicians

A treat-to-target(T2T)approach applies the principles of early intervention and tight disease control to optimise long-term outcomes in Crohn's disease.The Selecting Therapeutic Targets in Inflammatory Bowel Disease(STRIDE)-II guidelines specify short,intermediate,and long-term treatment goals,documenting specific treatment targets to be achieved at each of these timepoints.Scheduled appraisal of Crohn’s disease activity against pre-defined treatment targets at these timepoints remains central to determining whether current therapy should be continued or modified.Consensus treatment targets in Crohn’s disease comprise combination clinical and patient-reported outcome remission,in conjunction with biomarker normalisation and endoscopic healing.Although the STRIDE-II guidelines endorse the pursuit of endoscopic healing,clinicians must consider that this may not always be appropriate,acceptable,or achievable in all patients.This underscores the need to engage patients at the outset in an effort to personalise care and individualise treatment targets.The use of non-invasive biomarkers such as faecal calprotectin in conjunction with cross-sectional imaging techniques,particularly intestinal ultrasound,holds great promise;as do emerging treatment targets such as transmural healing.Two randomised clinical trials,namely,CALM and STARDUST,have evaluated the efficacy of a T2T approach in achieving endoscopic endpoints in patients with Crohn’s disease.Findings from these studies reflect that patient subgroups and Crohn’s disease characteristics likely to benefit most from a T2T approach,remain to be clarified.Moreover,outside of clinical trials,data pertaining to the real-world effectiveness of a T2T approach remains scare,highlighting the need for pragmatic real-world studies.Despite the obvious promise of a T2T approach,a lack of guidance to support its integration into real-world clinical practice has the potential to limit its uptake.This highlights the need to describe strategies,processes,and models of care capable of supporting the integration and execution of a T2T approach in real-world clinical practice.Hence,this review seeks to examine the current and emerging literature to provide clinicians with practical guidance on how to incorporate the principles of T2T into routine clinical practice for the management of Crohn’s disease.

Infiltration,runoff,and slope stability behaviors of infinite slope with macropores based on an improved Green–Ampt model

Infiltration–runoff–slope instability mechanism of macropore slope under heavy rainfall is unclear.This paper studied its instability mechanism with an improved Green–Ampt(GA)model considering the dual-porosity(i.e.,matrix and macropore)and ponding condition,and proposed the infiltration equations,infiltration–runoff coupled model,and safety factor calculation method.Results show that the infiltration processes of macropore slope can be divided into three stages,and the proposed model is rational by a comparative analysis.The wetting front depth of the traditional unsaturated slope is 17.2%larger than that of the macropore slope in the early rainfall stage and 27%smaller than that of the macropore slope in the late rainfall stage.Then,macropores benefit the slope stability in the early rainfall but not in the latter.Macropore flow does not occur initially but becomes pronounced with increasing rainfall duration.The equal depth of the wetting front in the two domains is regarded as the onset criteria of macropore flow.Parameter analysis shows that macropore flow is delayed by increasing proportion of macropore domain(ω_(f)),whereas promoted by increasing ratio of saturated permeability coefficients between the two domains(μ).The increasing trend of ponding depth is sharp at first and then grows slowly.Finally,when rainfall duration is less than 3 h,ωf andμhave no significant effect on the safety factor,whereas it decreases with increasingωf and increases with increasingμunder longer duration(≥3 h).With the increase ofω_(f),the slope maximum instability time advances by 10.5 h,and with the increase ofμ,the slope maximum instability time delays by 3.1 h.

Phase composition,conductivity,and sensor properties of cerium-doped indium oxide

The hydrothermal synthesis of In_(2)O_(3)and CeO_(2)–In_(2)O_(3)is investigated as well as the properties of sensor layers based on these compounds.During the synthesis of In_(2)O_(3),intermediate products In(OH)_(3)and InOOH are formed,which are the precursors of stable cubic(c-In_(2)O_(3))and metastable rhombohedral(rh-In_(2)O_(3))phases,respectively.A transition from c-In_(2)O_(3)to rh-In_(2)O_(3)is observed with the addition of CeO_(2).The introduction of cerium into rh-In_(2)O_(3)results in a decrease in the sensor response to hydrogen,while it increases in composites based on c-In_(2)O_(3).The data on the sensor activity of the composites correlate with XPS results in which CeO_(2)causes a decrease in the concentrations of chemisorbed oxygen and oxygen vacancies in rh-In_(2)O_(3).The reverse situation is observed in composites based on c-In_(2)O_(3).Compared to In_(2)O_(3)and CeO_(2)–In_(2)O_(3)obtained by other methods,the synthesized composites demonstrate maximum response to H_(2)at low temperatures by 70–100℃,and have short response time(0.2–0.5 s),short recovery time(6–7 s),and long-term stability.A model is proposed for the dependence of sensitivity on the direction of electron transfer between In_(2)O_(3)and CeO_(2).

Response Analysis of Tension-Based Tension Leg Platform Under Irregular Waves

Tension Leg Platform（TLP） is a hybrid structure used as oil drilling and production facility within water depths of 1200 m. The extension of this TLP concept to deeper waters is a challenge and warrants for some innovative design concepts. In this paper, a relatively new concept of TLP which is christened as Tension-Based Tension Leg Platform（TBTLP） and patented by Srinivasan（1998） has been chosen for study. Response analysis of TLP with one tension base under irregular waves for three different sea states has been performed using hydrodynamic tool ANSYS？ AQWA？. Results are reported in terms of RAOs, response spectrums for surge, heave and pitch degrees of freedom from which spectral statistics have been obtained. The statistics of TBTLP have been compared with TLPs（without tension base） for two different water depths to highlight the features of the new concept. The effect of viscous damping and loading effects on the RAOs are also investigated.

Finite Difference Solution of Response Time Delay of Magneto-rhelological Damper

Magneto-rhelological（MR） dampers are devices that employ rheological fluids to modify their mechanical properties. Their mechanical simplicity, high dynamic range, lower power requirements, large force capacity, robustness and safe maimer of operation in cases of failure have made them attractive devices for semi-active real-time control in civil, aerospace and automotive applications. Time response characteristic is one of the most important technical performances of MR dampers, and response time directly affects the control frequency, application range and the actual effect of MR dampers. In this study, one kind of finite difference solution for predicting the response time ofmagneto-rheological dampers from ＂off-state＂ to ＂on-state＂ is put forward. A laminar flow model is used to describe the flow in the MR valve, and a bi-viscous fluid flow model is utilized to describe the relationship of shear stress and shear rate of MR fluid. An explicit difference format is used to diseretize the Novior-Stoks equation, and stability condition of this algorithm is built by Von-Neumann stability criterion. The pressure gradient along the flow duct is solved by a dichotomy algorithm with iteration, and the changing curve of the damping force versus time of MR damper is obtained as well. According to the abovementioned numerical algorithm, the damping forces versus time curves from ＂off-state＂ to ＂on-state＂ of a cylindrical piston type MR damper are computed. Moreover, the MR damper is installed in a material test system（MTS）, the magnetic field in the wire circles of the MR damper is ＂triggered＂ when the MR damper is imposed to do a constant speed motion, and the damping force curves are recorded. The comparison between numerical results and experimental results indicates that this finite difference algorithm can be used to estimate the response time delay of MR dampers.

Global qualitative analysis of new Monod type chemostat model with delayed growth response and pulsed input in polluted environment

In this paper, we consider a new Monod type chemostat model with time delay and impulsive input concentration of the nutrient in a polluted environment. Using the discrete dynamical system determined by the stroboscopic map, we obtain a ＂microorganism-extinction＂ periodic solution. Further, we establish the sufficient conditions for the global attractivity of the microorganism-extinction periodic solution. Using new computational techniques for impulsive and delayed differential equation, we prove that the system is permanent under appropriate conditions. Our results show that time delay is ＂profitless＂.

Transient impact responses of laminated composite cylindrical shells

The generalized ray method(GRM) has been successfully used to study the transient elastic wave transmitting in the beams,planar trusses,space frames and infinite layered media.In this letter,the GRM is extended to investigate the early short time transient responses of laminated composite cylindrical shells under impact load.By using the Laplace transformation and referring to the boundary conditions,the ray groups transmitting in the finite laminated cylindrical shells under the shock load are obtained and the transient response related to each ray group can be derived via FFT algorithm.From the numerical results,it is shown that the early short time transient accelerations of the laminated composite cylindrical shell under impact loads are very large.But the short time transient shear strain and displacement are very small.

Time history of seismic earth pressure response from gravity retaining wall based on energy dissipation

The seismic design of gravity retaining walls is based mostly on the pseudo static method.The seismic earth pressure is assumed to be a constant without considering the wave traveling effect when the seismic wave propagates through the slope.However,under continuous ground motion,the actual earth pressure on the retaining wall varies with time.The present seismic earth pressure calculation method yields results that differ significantly from the actual scenario.Considering this,a slip surface curve was assumed in this study.It is more suitable for engineering practice.In addition,a theoretical calculation model based on energy dissipation was established.The time history of seismic earth pressure response under continuous ground motion was calculated using the equilibrium equation between the external power and the internal energy dissipation power of the sliding soil wedge.It can more effectively reflect the stress scenario of a retaining wall under seismic conditions.To verify the applicability of the proposed approach,a large-scale shaking table test was conducted,and the time history of the seismic earth pressure response obtained from the experiment was compared with the calculation results.The results show that the proposed approach is applicable to the calculation of the time history of seismic earth pressure response of gravity retaining walls.This lays the foundation for the seismic design of retaining structures by using dynamic time history.

Oscillation in Response and Recovery Properties of SnO_2 Gas Sensor

Six kinds of Sn(OH)_4 precipitates were prepared by the chemical precipitation method (liquid-phase),of which the pH values are 3.0 (sample 1),4.5 (sample 2),6.0 (sample 3),7.5 (sample 4),9.0 (sample 5) and 10.5 (sample 6),respectively. After washed and dried,the Sn(OH)_4 precipitates were first calcined into tin oxide powder.Six kinds of gas sensors were made from the obtained SnO_2 powders.The XRD patterns of all the samples were recorded.The sensing properties of all samples to C_2H_5OH and H_2 gases were measured in different gas concentrations and temperatures,including the sensitivities of all samples,their response and recovery properties.The recovery properties of all samples to C_2H_5OH exhibit the sinusoidal oscillation character.

The Response Time Analysis of Digital Broadcasting System

Digital broadcasting system has become a high-light of research on computer application. To respond to the changes of the playbill in the broadcasting system in real time, the response time of the system must be studied. There is scarcely the research on this area currently. The influence factors in the response time are analyzed; the model on the response time of the system service is built; how the influence factors affect the response time of the system service is validated; and four improvement measures are proposed to minimize the response time of system service.

Strong-field response time and its implications on attosecond measurement

To measure and control the electron motion in atoms and molecules by the strong laser field on the attosecond time scale is one of the research frontiers of atomic and molecular photophysics. It involves many new phenomena and processes and raises a series of questions of concepts, theories, and methods. Recent studies show that the Coulomb potential can cause the ionization time lag(about 100 attoseconds) between instants of the field maximum and the ionization-rate maximum. This lag can be understood as the response time of the electronic wave function to the strong-field-induced ionization event. It has a profound influence on the subsequent ultrafast dynamics of the ionized electron and can significantly change the time–frequency properties of electron trajectory(an important theoretical tool for attosecond measurement). Here, the research progress of response time and its implications on attosecond measurement are briefly introduced.

The simulation of temperature dependence of responsivity and response time for 6H-SiC UV photodetector

In this paper the temperature dependence of responsivity and response time for 6H-SiC ultraviolet （UV） photodetector is simulated based on numerical model in the range from 300 K to 900 K. The simulation results show that the responsivity and the response time of device are less sensitive to temperature and this kind of UV photodetector has excellent temperature stability. Also the effects of device structure and bias voltage on the responsivity and the response time are presented. The thicker the drift region is, the higher the responsivity and the longer the response time are. So the thickness of drift region has to be carefully designed to make trade-off between responsivity and response time.

Response time of variable transparency glass and its application to welding goggles

The behavior of variable transparency glass is studied, and the response time analyzed and measured aimed at applications to welding goggles. Detection apparatus for goggle testing is involved in the design and development. Charac-teristics of the apparatus are discussed based on experiments. The definition of nominal response time and effective response time are presented based on the analysis and calculation with experimental data.

An Analysis of the Static and Dynamic Behavior of the Hydraulic Compensation System of a Multichannel Valve

Electro-hydraulic proportional valve is the core control valve in many hydraulic systems used in agricultural and engineering machinery.To address the problem related to the large throttling losses and poor stability typically associated with these valves,here,the beneficial effects of a triangular groove structure on the related hydraulic response are studied.A mathematical model of the pressure compensation system based on the power-bond graph method is introduced,and the AMESim software is used to simulate its response.The results show that the triangular groove structure increases the jet angle and effectively compensates for the hydrodynamic force.The steady-state differential pressure at the valve port of the new pressure compensation structure was 0.65 MPa.Furthermore,experimental results show that the pressure difference at the main valve port is 0.73 MPa,and that the response time is less than 0.2 s.It is concluded that the new compensation structure has good pressure compensation response characteristics.

Overbooking-Enabled Task Scheduling and Resource Allocation in Mobile Edge Computing Environments

Mobile Edge Computing(MEC)is proposed to solve the needs of Inter-net of Things(IoT)users for high resource utilization,high reliability and low latency of service requests.However,the backup virtual machine is idle when its primary virtual machine is running normally,which will waste resources.Overbooking the backup virtual machine under the above circumstances can effectively improve resource utilization.First,these virtual machines are deployed into slots randomly,and then some tasks with cooperative relationship are off-loaded to virtual machines for processing.Different deployment locations have different resource utilization and average service response time.We want tofind a balanced solution that minimizes the average service response time of the IoT application while maximizing resource utilization.In this paper,we propose a task scheduler and exploit a Task Deployment Algorithm(TDA)to obtain an optimal virtual machine deployment scheme.Finally,the simulation results show that the TDA can significantly increase the resource utilization of the system,while redu-cing the average service response time of the application by comparing TDA with the other two classical methods.The experimental results confirm that the perfor-mance of TDA is better than that of other two methods.

Zn∶In∶Fe∶LiNbO_3晶体的生长及其二波耦合效应的研究

ZnO(4mol%),In 2O 3(1mol%)and Fe 2O 3(0.05mol%)were doped in LiNbO 3 and Czochralski method was used to grow Zn∶In∶Fe∶LiNbO 3 crystal.The diameter of the crystal we grew is 30mm.The technology parameter we took is that the axial temperature gradient is 40℃/cm,the growth rate is 1mm/h, the rotation rate is 15-25r/min,the temperature of polarization is 1220℃ and the current density of polarization is 5mA/cm 2.The wafer dimension is 10mm×10mm×3mm and was covered in Li 2CO 3 powder to reduce.The reduction temperature is 500℃ and reduction time is 30 hours. OH - stretch vibration transmission spectra were measured by Fourier infrared spectrophotometer. There are two absorption peaks in OH - spectra of Zn∶In∶Fe∶LiNbO 3,in which one is at 3534cm -1 (2.83μm) and the other is at 3505cm -1 (2.85μm).The peak at 2.85μm is far lower than that at 2.83μm. Because of the threshold effect of Zn 2+ and In 3+ ,the peak at 2.83μm is generated and the peak at 2.85μm is related with Fe 3+ .In LiNbO 3 only doped with Fe,Li + site is taken place by Fe 3+ .When doping Zn 2+ and In 3+ in high concentration,these two ions take place Nb that is at Li site and Fe 3+ substitutes for Nb 5+ at the same time.The interaction between Fe 3+ and OH - make the OH - peak shift to 2.85μm.

利用RTR实现静态路由自动切换的方案研究

两网络节点通过传统的单线路接入方式已经远远不能满足目前系统的需求,目前均采用双线路接入方式来连接两节点网络。当主线路出现故障后,需进行人工干预才能切换至备线路上。而通过思科路由器的Response Time Reporter(简称RTR)功能,就能使网络自动切换至备线路上,除去人工干预环节,以此来保证网络的冗余性及安全性,使网络真正达到7*24小时不间断运行。

Dynamic Calibration of the Cutting Temperature Sensor of NiCr/NiSi Thin-film Thermocouple

In high-speed cutting, natural thermocouple, artificial thermocouple and infrared radiation temperature measurement are usually adopted for measuring cutting temperature, but these methods have difficulty in measuring transient temperature accurately of cutting area on account of low response speed and limited cutting condition. In this paper, NiCr/NiSi thin-film thermocouples（TFTCs） are fabricated according to temperature characteristic of cutting area in high-speed cutting by means of advanced twinned microwave electro cyclotron resonance（MW-ECR） plasma source enhanced radio frequency（RF） reaction non-balance magnetron sputtering technique, and can be used for transient cutting temperature measurement. The time constants of the TFTCs with different thermo-junction film width are measured at four kinds of sampling frequency by using Ultra-CFR short pulsed laser system that established. One-dimensional unsteady heat conduction model is constructed and the dynamic performance is analyzed theoretically. It can be seen from the analysis results that the NiCr/NiSi TFTCs are suitable for measuring transient temperature which varies quickly, the response speed of TFTCs can be obviously improved by reducing the thickness of thin-film, and the area of thermo-junction has little influence on dynamic response time. The dynamic calibration experiments are made on the constructed dynamic calibration system, and the experimental results confirm that sampling frequency should be larger than 50 kHz in dynamic measurement for stable response time, and the shortest response time is 0.042 ms. Measurement methods and devices of cutting heat and cutting temperature measurement are developed and improved by this research, which provide practical methods and instruments in monitoring cutting heat and cutting temperature for research and production in high-speed machining.