Nonlinear vibration of embedded single-walled carbon nanotube with geometrical imperfection under harmonic load based on nonlocal Timoshenko beam theory

Based on the nonlocal continuum theory, the nonlinear vibration of an embedded single-walled carbon nanotube （SWCNT） subjected to a harmonic load is in- vestigated. In the present study, the SWCNT is assumed to be a curved beam, which is unlike previous similar work. Firstly, the governing equations of motion are derived by the Hamilton principle, meanwhile, the Galerkin approach is carried out to convert the nonlinear integral-differential equation into a second-order nonlinear ordinary differ- ential equation. Then, the precise integration method based on the local linearzation is appropriately designed for solving the above dynamic equations. Besides, the numerical example is presented, the effects of the nonlocal parameters, the elastic medium constants, the waviness ratios, and the material lengths on the dynamic response are analyzed. The results show that the above mentioned effects have influences on the dynamic behavior of the SWCNT.

Bending and wave propagation analysis of axially functionally graded beams based on a reformulated strain gradient elasticity theory

A new size-dependent axially functionally graded(AFG) micro-beam model is established with the application of a reformulated strain gradient elasticity theory(RSGET). The new micro-beam model incorporates the strain gradient, velocity gradient,and couple stress effects, and accounts for the material variation along the axial direction of the two-component functionally graded beam. The governing equations and complete boundary conditions of the AFG beam are derived based on Hamilton's principle. The correctness of the current model is verified by comparing the static behavior results of the current model and the finite element model(FEM) at the micro-scale. The influence of material inhomogeneity and size effect on the static and dynamic responses of the AFG beam is studied. The numerical results show that the static and vibration responses predicted by the newly developed model are different from those based on the classical model at the micro-scale. The new model can be applied not only in the optimization of micro acoustic wave devices but also in the design of AFG micro-sensors and micro-actuators.

Isogeometric analysis of free-form Timoshenko curved beams including the nonlinear effects of large deformations

In the present paper, the isogeometric analysis（IGA） of free-form planar curved beams is formulated based on the nonlinear Timoshenko beam theory to investigate the large deformation of beams with variable curvature. Based on the isoparametric concept, the shape functions of the field variables（displacement and rotation） in a finite element analysis are considered to be the same as the non-uniform rational basis spline（NURBS） basis functions defining the geometry. The validity of the presented formulation is tested in five case studies covering a wide range of engineering curved structures including from straight and constant curvature to variable curvature beams. The nonlinear deformation results obtained by the presented method are compared to well-established benchmark examples and also compared to the results of linear and nonlinear finite element analyses. As the nonlinear load-deflection behavior of Timoshenko beams is the main topic of this article, the results strongly show the applicability of the IGA method to the large deformation analysis of free-form curved beams. Finally, it is interesting to notice that, until very recently, the large deformations analysis of free-form Timoshenko curved beams has not been considered in IGA by researchers.

Bending of functionally graded nanobeams incorporating surface effects based on Timoshenko beam model

The bending responses of functionally graded （FG） nanobeams with simply supported edges are investigated based on Timoshenko beam theory in this article. The Gurtin-Murdoch surface elasticity theory is adopted to analyze the influences of surface stress on bending response of FG nanobeam. The material properties are assumed to vary along the thickness of FG nanobeam in power law. The bending governing equations are derived by using the minimum total potential energy principle and explicit formulas are derived for rotation angle and deflection of nanobeams with surface effects. Illustrative examples are implemented to give the bending deformation of FG nanobeam. The influences of the aspect ratio, gradient index, and surface stress on dimensionless deflection are discussed in detail.

Analysis of wave propagation in micro/nanobeam-like structures: A size-dependent model

By incorporating the strain gradient elasticity into the classical Bernoulli-Euler beam and Timoshenko beam models, the size-dependent characteristics of wave propaga- tion in micro/nanobeams is studied. The formulations of dis- persion relation are explicitly derived for both strain gradi- ent beam models, and presented for different material length scale parameters （MLSPs）. For both phenomenological size- dependent beam models, the angular frequency, phase veloc- ity and group velocity increase with increasing wave num- ber. However, the velocity ratios approach different values for different beam models, indicating an interesting behavior of the asymptotic velocity ratio. The present theory is also compared with the nonlocal continuum beam models.

Free vibration characteristics of sectioned unidirectional/bidirectional functionally graded material cantilever beams based on finite element analysis

Advancements in manufacturing technology,including the rapid development of additive manufacturing(AM),allow the fabrication of complex functionally graded material(FGM)sectioned beams.Portions of these beams may be made from different materials with possibly different gradients of material properties.The present work proposes models to investigate the free vibration of FGM sectioned beams based on onedimensional(1D)finite element analysis.For this purpose,a sample beam is divided into discrete elements,and the total energy stored in each element during vibration is computed by considering either the Timoshenko or Euler-Bernoulli beam theory.Then,Hamilton’s principle is used to derive the equations of motion for the beam.The effects of material properties and dimensions of FGM sections on the beam’s natural frequencies and their corresponding mode shapes are then investigated based on a dynamic Timoshenko model(TM).The presented model is validated by comparison with three-dimensional(3D)finite element simulations of the first three mode shapes of the beam.

Buckling Analysis of Axially Functionally Graded and Non-Uniform Beams Based on Timoshenko Theory

In this paper,the buckling behaviors of axially functionally graded and non-uniform Timoshenko beams were investigated.Based on the auxiliary function and power series,the coupled governing equations were converted into a system of linear algebraic equations.With various end conditions,the characteristic polynomial equations in the buckling loads were obtained for axially inhomogeneous beams.The lower and higher-order eigenvalues were calculated simultaneously from the multi-roots due to the fact that the derived characteristic equation was a polynomial one.The computed results were in good agreement with those analytical and numerical ones in literature.

Analytical Solutions for Free Vibration and Buckling of Composite Beams Using a Higher Order Beam Theory

To satisfy the interfacial shear force continuity conditions, a new model is proposed for the two-layer composite beam with partial interaction by modifying Reddy＇s higher order beam theory. The governing differential equations for free vibration and buckling are formulated using the Hamilton＇s principle, the natural frequencies and axial forces are thus analytically obtained by Laplace transform technique. The analytical results are verified through the comparison with those of several other models common in use; and the presented model is found to be a finer one than the Reddy＇s. A parametric study is also performed to investigate the effects of geometry and material parameters.

A novel finite element model for single-layered wire strand

A new finite element model for single-layered strand was investigated for accurate and efficient mechanical behavior analysis.Mathematical model was created by sectional path-nodes sweeping and dynamic node-beam mapping.Geometric relations between nodes in center core wire and helical wires were deduced in tension and bending incorporating material elasticity theory and deformation geometrical compatibility.Based on Timoshenko beam theory,strand of a pitch length was modeled with specific material,geometric parameters and synthesized constraint equations defined in ANSYS software,and predetermined load cases were performed.The obtained results show that discrepancies between suggested method and Costello theory do not exceed 1.51% in tension and 6.21% in bending,which verifies the correctness and accuracy of the suggested finite element model in predicting mechanical behavior of single-layered wire strand.

Effects of ramp vibrational states on flexural intrinsic vibrations inBesocke-style scanners

For both the vibrating and steady supporting surfaces of a scanning disk in a Besocke-style piezoelectric scanner, a theoretical model is given by considering the nonlinear lateral friction at the micro-contact interface between the positioning legs and the supporting surface. Numerical simulations demonstrate that unexpected flexural vibrations can arise from a vibrating ramp, and their frequencies are lower than the eigenfrequencies of the scanner in the linearly elastic regime. The vibrations essentially depend on 1） the vibrational states of the supporting ramp and the steel ball tips on the three piezo- electric positioning legs, and 2） the tribological characteristics of the contacts between the tips and the ramp. The results give an insight into the intrinsic vibrations of the scanners, and are applicable in designing and optimizing piezoelectric scanning systems.

Flexural resonance vibrations of piezoelectric ceramic tubes in Besocke-style scanners

Flexural resonance vibrations of piezoelectric ceramic tubes in Besocke-style scanners with nanometer resolution are studied by using an electro-mechanical coupling Timoshenko beam model. Meanwhile, the effects of friction, the first moment, and moment of inertia induced by mass loads are considered. The predicted resonance frequencies of the ceramic tubes are sensitive to not only the mechanical parameters of the scanners, but also the friction acting on the attached shaking ball and corresponding bending moment on the tubes. The theoretical results are in excellent agreement with the related experimental measurements. This model and corresponding results are applicable for optimizing the structures and performances of the scanners.

Bending short DNAs as transversely isotropic rings in series

Despite the significance of the high flexibility exhibited by short DNAs,there remains an incomplete understanding of their anomalous persistence length.In this study,we propose to model each basic unit of gene sequences within short DNAs as a transversely isotropic ring.Our comprehensive model analysis successfully replicates the observed high flexibility of short DNAs and also displays the impact of sequence dependence,aligning with experimental findings.Furthermore,our analysis suggests that the bending behavior of short DNAs can be effectively described by the Timoshenko beam theory with the consideration of shear.

An improved analytical solution for solving the shield tunnel uplift problem

The problem of shield tunnel uplift is a common issue in tunnel construction.Due to the decrease in shear stiffness at the joints between the rings,uplift is typically observed as bending and dislocation deformation at these joints.Existing modeling methods typically rely on the Euler-Bernoulli beam theory,only considering the bending effect while disregarding shear deformation.Furthermore,the constraints on the shield tail are often neglected in existing models.In this study,an improved theoretical model of tunnel floating is proposed.The constraint effect of the shield machine shell on the tunnel structure is considered using the structural forms of two finite long beams and one semi-infinite long beam.Furthermore,the Timoshenko beam theory is adopted,providing a more accurate description of tunnel deformation,including both the bending effect and shear deformation,than existing models.Meanwhile,the buoyancy force and stratum resistance are calculated in a nonlinear manner.A reliable method for calculating the shear stiffness correction factor is proposed to better determination of the calculation parameters.The proposed theoretical model is validated through five cases using sitemonitored data.Its applicability and effectiveness are demonstrated.Furthermore,the influences of soil type,buried depth,and buoyancy force on the three key indicators of tunnel floating(i.e.the maximum uplift magnitude,the ring position with the fastest uplift race,and the ring position with the maximum uplift magnitude)are analyzed.The results indicate that the proposed model can provide a better understanding of the floating characteristics of the tunnel structure during construction.

FEA Versus IGA in a Two-Node Beam Element Based on Unified and Integrated Method

This paper presents a new concept called Unified and Integrated Method for a shear deformable beam element.In this method,Timoshenko beam theory is unified and integrated in such a way that takes into account the effect of transverse shear and maintains the shear locking free condition at the same time to generate proper behavior in the analysis of thin to thick beams.The unified and integrated method is applied to finite element analysis(FEA)and isogeometric analysis(IGA)on two-node beam element.This method will be used to analyze uniformly loaded beams with various boundary conditions.A shear influence factor of f,which is a function of beam thickness ratio(L/h),is expressed explicitly as control of the transverse shear strain effect.The analysis gives interesting results showing that applying the unified and integrated method in FEA and IGA will yield exact values of DOF’s and displacement function even when using only a single element.Numerical examples demonstrate the validity and efficiency of the unified and integrated methods.